‘Zip Aquapoint IV’ range of wall mounted directly heated unvented storage vessels (cased and insulated) incorporating an enamel lined cylinder and safety kit. The cylinder is factory fitted with a temperature and pressure relief valve (7.0 bar/90°C) and a drain valve. The product is supplied with an installation kit comprising of an expansion vessel, tundish and an inlet manifold incorporating a 6.0 bar expansion relief valve, an adjustable pressure reducing valve with stainless-steel strainer (adjustable between 2.7 and 3.3 bar, but pre-set at 3.0 bar), and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The compression connections of the installation kit are for use with copper pipe (Manufactured to EN 1057). Maximum working pressure 5.5 bar. Maximum operating temperature 70°C. Cold supply only.
Range of water meters with brass bodies, plastic turbines and plastic strainers on inlets. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C
Range of installation kits comprising of a water block, double check valve assembly (suitable for backflow protection against fluid category 3) and a pressure reducing valve (outlet pressure range 3.0 to 3.5 bar). Model 95428 incorporates a water filter. Maximum working pressure: 16 Bar Maximum operating temperature: 23°C
Ranges of sensor operated flow control devices either mains or battery powered, incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C
Range of ‘Tcontrols’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C
Heat pump kit incorporating flow and temperature sensors with stainless steel and plastic bodies. Maximum working pressure 5.0 Bar. Maximum operating temperature 90.0°C.
Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C
Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The Movitec VME models and VE/VSE models added May 2025 can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: Comeo C models 10.0 bar, Movitec VM models with an oval flange or VME models with integral check valve 16.0 bar, All other Movitec VM models 25.0 bar. Models added May 2025: Movitec V/VS models with an oval flange or VE models with integral check valve 16.0 bar, All other Movitec V/VS models and Movitec HI/HSI models 25.0 bar. Maximum operating temperatures: Existing models: Comeo C and Movitec VME models with integral check valve 60°C, all other model variants 100°C. Models added May 2025: Movitec VE models with integral check valve 60°C, all other model variants 100°C.
Permanent magnet multi-stage centrifugal pump with a plastic body. The product is supplied with brass adaptors and a copper olive to convert to compression. The compression connections are for use with Irish copper pipe (manufactured to EN1057) (27.4mm size) and copper pipe (manufactured to EN1057) (28mm size). Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.
Permanent magnet multi-stage centrifugal pump with a plastic body. The product is supplied with brass adaptors and a copper olive to convert to compression. The compression connections are for use with Irish copper pipe (manufactured to EN1057) (27.4mm size) and copper pipe (manufactured to EN1057) (28mm size). Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.
Page 385 of 413
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
