Range of modular silver and copper disinfection ion generators with a stainless-steel bodies Maximum working pressure 9.0 bar. Cold water use only.

Section:

2415 Water conditioners - Disinfectant ion generators

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP M

Marking:

Dosita, model and product info on data plate.

Installation Requirements:

R001 R160 R170 R290 R415

Expiry date:

31/07/2029

Model:

Ionsafe 1. Models added August 2024: Ionsafe 2, 3, 4, 5 & 6.

Product Images

Approval Holder:

Dosita Havuz Ve Su Teknolojilerileri

Company Name

Dosita Havuz Ve Su Teknolojilerileri

Address

Çiftlik Mah Bilgin caddesi no 34 Gölcük Kocaeli Türkiye

View All Listings by this Company

Manufacturer:

Dosita Havuz Ve Su Teknolojilerileri

Company Name

Dosita Havuz Ve Su Teknolojilerileri

Address

Çiftlik Mah Bilgin caddesi no 34 Gölcük Kocaeli Türkiye

View All Listings by this Company

'Ronfalin ABS 609 White 2097P'. White coloured (opaque), injection moulded ABS materials. For use with water up to 85°C.

Section:

5020 Acrylonitrile Butadeine Styrene Copolymer (ABS)

Expiry date:

31/08/2029

Approval Holder:

Lyondellbasell

Company Name

Lyondellbasell

Address

1 Kingsland Grange Woolston, Warrington, Cheshire

Postcode

WA1 4RA

View All Listings by this Company

'CLEAN TECH PW (BG)'. Factory applied, two-component, blue coloured epoxy coating. Mix parts A and B in a volume ratio of 3:1 and apply as per manufacturer's TDS 'CCPL/TDS/R11/CRC/22-23/04/R13/BG/R1', dated '15.09.2022'. Cure for 7 days@30°C. Between August 2024 and January 2025, the coating is approved for use with water up to 23°C. Between February 2025 and August 2029, the coating is approved for use with water up to 60°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.

Section:

5030 Coatings, Paints & Linings

Section Subtitle:

Factory applied pipe & fittings coatings.

WRAS Approval Number:

240855030

Expiry date:

31/08/2029

Approval Holder:

Clean Coats Pvt. Ltd.

Company Name

Clean Coats Pvt. Ltd.

Address

K 30/1, Additional Industrial Area, M.I.D.C. Anand Nagar, Ambernath (E), Dist. Thane, Maharashtra, PIN 412506

Country

India

View All Listings by this Company

'SJ-195120WT GRP Panel'. Off-white coloured, compression moulded GRP panel. For use with water up to 50°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

240855021

Expiry date:

31/08/2029

Approval Holder:

Sejin SMC Co. Ltd.

Company Name

Sejin SMC Co. Ltd.

Address

16th Floor Miwon Building, 43 Yeouido-Dong, Yeongdeungpo-Gu

Country

Seoul 150-733,

Phone

+82 2 7808330

General Email

info@sejinsmc.co.kr

View All Listings by this Company

'Relon A500 Nero 4095 GF30 K'. Black coloured, injection moulded, glass filled PA66 material. For use with water up to 80°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240655068

Expiry date:

30/06/2029

Approval Holder:

FB Tecnopolimeri Srl.

Company Name

FB Tecnopolimeri Srl.

Address

Via Pradone 24/28, Creamosano 26010

Country

Italy

View All Listings by this Company

'Pexylene 50937 Natural, Black & Blue'. Rotationally moulded polyethylene materials available in natural (appears off-white), black & blue colours. For use with water up to 65°C.

Section:

5245 Polyethylene

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240755043

Expiry date:

31/07/2029

Approval Holder:

Corcoran Chemicals Ltd.

Company Name

Corcoran Chemicals Ltd.

Address

Kingsbridge House, 17-22 Parkgate Street, Dublin 8

Country

Ireland

View All Listings by this Company

'BC245MO' & 'Bn BC245MO-90'. Natural (off-white), injection moulded polypropylene material. For use with water up to 85°C.

Section:

5265 Polypropylene

Section Subtitle:

Material only. Components made from materials listed in this section may require to be submitted for audit tests.

WRAS Approval Number:

240755064

Expiry date:

31/07/2029

Approval Holder:

Borealis AG

Company Name

Borealis AG

Address

Trabenstrasse 6-8, A-1020 Vienna

Country

Austria

View All Listings by this Company

'Inoflon M 695'. White coloured (opaque), sintered PTFE material. For use with water up to 85°C.

Section:

5295 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240755067

Expiry date:

31/07/2029

Approval Holder:

Gesellschaft für Dichtungstechnik mbH

Company Name

Gesellschaft für Dichtungstechnik mbH

Address

Hofwiesenstrasse 7, 74336 Brackenheim

Country

Germany

View All Listings by this Company

'EP703904 'O' rings'. Black coloured, injection moulded EPDM 'O' rings. Shore hardness 70. Tested in-radius size between 0.5mm & 3.0mm. 'EP703904 Gasket Seal Rings’ were added to the approval in June 2024. Black coloured, injection moulded EPDM gasket seal rings. Shore hardness 70. Tested in-radius size between 0.75mm & 2.0mm. For use with water up to 85°C.

Section:

5360 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - components.

WRAS Approval Number:

240155050

Expiry date:

31/01/2029

Approval Holder:

Freudenberg Industrial Services GmbH

Company Name

Freudenberg Industrial Services GmbH

Address

Albert-Schweitzer-Ring 1, 22045 Hamburg

Country

Germany

View All Listings by this Company

'NBR N65WKZ'. Black coloured, injection moulded NBR rubber material. Shore hardness 59. Tested in-radius 1.0mm. For use with water up to 23°C.

Section:

5395 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

250255002

Expiry date:

28/02/2030

Approval Holder:

Duram Industries A.C. Ltd.

Company Name

Duram Industries A.C. Ltd.

Address

Kibbuts Ramat, Hakovesh, 44930

Country

Israel

View All Listings by this Company