| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TPASHBAFILL3 | Chromed | BSP 3/4" (M) | 10 bar | 65 °C | Lecico | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
Range of wall mounted, two-hole, single outlet (fixed) combination tap assemblies, (brass bodies, various finishes - see model), incorporating a ceramic cartridge headworks with either a single lever operating member, supplied with Stainless steel braided PEX lined flexible hose assemblies. In some models the spout outlet incorporates a plastic aerator (see model). Maximum working pressure 10.0 bar. Maximum temperature 65°C.
Non-metallic materials and components comply with BS6920 at 65°C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61405 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 61105 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 51505 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
Range of wall mounted two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a 2-way ceramic disc diverter headwork, with cubed/lever type operating members, diverting between the spout outlet and a shower outlet. The temperature is controlled independently via a thermostatic cartridge with a manual override button and cubed/lever type operating members. Each inlet incorporates a stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S006* | Various | 3/4”x1/2” offset unions | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, |
| S007* | Various | captive nut G1/2" | 10 bar | 65 °C | WINSDRUM | On body | No | 1/4 Turn ceramic disc | Not Applicable | Aerator | Shower Hose, Handset, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
Range of two hole, single outlet (swivel) combination tap assemblies (brass bodies, various finishes - see model), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The product is also supplied with an alternative spout outlet that incorporates a plastic flow straightener and a stainless-steel strainer. This product is supplied with metal backnuts. Maximum working pressure 5.0 bar. Maximum working temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| QST DSM C | Chrome (Cr6) | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Plinth | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| RP3 QST DSM C | Chrome (Cr3) | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Plinth | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 61401 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 61101 | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| 51501AQ | Chrome plated | 3/4'' BSP (M) | 10 bar | 60 °C | Bokeya | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5302* | Various | 1/2" BSP (F) | 10 bar | 65 °C | LUSSO | on spout | No | 1/4 Turn ceramic disk | Not Applicable | Aerator | |
| CRS014* | Various | 1/2" BSP (F) | 10 bar | 65 °C | LUSSO | on Rosette | No | 1/4 Turn ceramic disk | Not Applicable | Aerator |
*denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 53110* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On base of spout | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | Interconnecting Hoses, |
| CRS013* | Various | ½" captive nut | 10 bar | 65 °C | LUSSO | On base of spout | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | Interconnecting Hoses, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
Filling valve with a DZR brass body comprising of: Two check valve cartridges on the inlet, verified by test (suitable for backflow protection against Fluid Category 3), a pressure reducing valve preset at 1.4 bar, a sprung loaded self-closing valve and a single check valve cartridge on the outlet, verified by test (suitable for backflow protection against Fluid Category 2). There is a drain port below the self-closing valve chamber. Compression connections are for use with copper pipe (manufactured to EN 1057). Maximum inlet supply pressure 10.0 bar. Maximum operating temperature 100°C.
Uponor S-Press composite fittings, Uponor S-Press composite PPSU reducers with S-Press PLUS composite PPSU nipples, Uponor RS fittings & Uponor S Press Metal Press fittings for use with for use with Uponor MLC pipe. Maximum working pressure and operating temperature: 10.0 bar@70°C
Range of electromagnetic water meters with stainless steel bodies, dark grey ebonite rubber inner liner and stainless-steel (SUS316L) electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 40°C.
Range of rotary vane pumps with either brass, stainless-steel or plastic bodies, stainless steel impellor and EPDM ‘O’ rings. Maximum working pressure 20 Bar. Cold water use.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 48 656 xx0 | Various | G 1/2" | open outlet bar | 60 °C | AXOR | on the body | Yes | Not applicable | Not Applicable | Not Applicable |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 39 773 xx0 | Various | G 1/2 | open outlet bar | 60 °C | AXOR | on select button | Yes | Not applicable | Not Applicable | Not Applicable | |
| 39 774 xx0 | Various | G 1/2 | open outlet bar | 60 °C | AXOR | on select button | Yes | Not applicable | Not Applicable | Not Applicable | |
| 26 862 xx0 | Various | G 1/2 | open outlet bar | 60 °C | Hansgrohe | on cover | Yes | Not applicable | Not Applicable | Not Applicable |
Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1001357** | various | G1/2 external thread | Open outlet bar | 60 °C | Aqualisa | Body | No |
Aqualisa 1001357** ** represents the following colour/finish codes: AA = Chrome AD = Matt Black AH = Core Brushed Brass Post 24 (Xenia) AJ = Core Brushed Gunmetal Grey
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| T58 | Chrome | 1/2’’BSP(F) | Open outlet use only bar | 60 °C | Duschy | Body | No | Not applicable | Not Applicable | Open Outlet | |
| P220 | Chrome | 1/2’’BSP(M) | Open outlet use only bar | 60 °C | Duschy | Body | No | Not applicable | Not Applicable | Open Outlet |
A range of Shower handsets in various finishes. Open outlet. Maximum operating temperature 60 °C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| A108102 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A110101 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A111101 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A173102 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A173302 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A184101 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A184302 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A213101 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A215101 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A220103 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A238104 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A239104 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A258102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A259102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A268102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A269102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A293102 | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | |||||
| A297101 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A298101 | Chromed | BSP 1/2" (F) | Open outlet use only bar | 65 °C | Oshince logo | Face | No | ||||
| A506101 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A515301 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A515302 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A520301 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No | ||||
| A520302 | Chromed | BSP 1/2" (M) | Open outlet use only bar | 65 °C | Oshince logo | Body | No |
Page 318 of 326
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
