Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2211366

‘Flowflex,’ and ‘Opal’ ranges of brass, DZR brass, chromium plated brass, nickel plated brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2211366
Size:: See models.
Marking:: FLOWFLEX, Size, EN1542-2, UK or UK Made OPAL, Size, EN1254-2 CR on DZR models
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: 99713 Flowflex Brass Compression Straight Coupling 10mm, 44117 Opal Brass Compression Straight Coupling 15mm, 59406 Opal Brass Compression Straight Coupling 22mm, 50808 Opal Brass Compression Straight Coupling 28mm, 57128 Flowflex Brass Compression Reducing Coupling 15 x 8mm, 93356 Flowflex Brass Compression Reducing Coupling 15 x 10mm, 75499 Flowflex Brass Compression Reducing Coupling 22 x 15mm, 44694 Flowflex Brass Compression Reducing Coupling 28 x 22mm, 46376 Opal Brass Compression Repair Coupling 15 x 100mm, 91660 Opal Brass Compression Male Adaptor 15mm x ½”, 60156 Opal Brass Compression Male Adaptor 22mm x ¾”, 12167 Opal Brass Compression Male Adaptor 22mm x 1”, 85952 Opal Brass Compression Male Adaptor 28mm x 1”, 39623 Opal Brass Compression Female Adaptor 15mm x ½”, 37759 Opal Brass Compression Female Adaptor 22mm x ¾”, 20725 Opal Brass Compression Female Adaptor 22mm x 1”, 14922 Opal Brass Compression Female Adaptor 28mm x 1”, 75114 Opal Brass Compression Straight Tap Connector 15mm x ½”, 92409 Opal Brass Compression Straight Tap Connector 22mm x ¾”, 58277 Opal Brass Compression Tank Connector 15mm, 54014 Opal Brass Compression Tank Connector 22mm, 78520 Opal Brass Compression Tank Connector 28mm, 43650 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 10mm, 21910 Flowflex DZR Brass Compression Three Piece Reducing Set 22 x 15mm, 25902 Flowflex Brass Compression Stop End 10mm, 63232 Opal Brass Compression Stop End 15mm, 28223 Opal Brass Compression Stop End 22mm, 42207 Opal Brass Compression Stop End 28mm, 47899 Flowflex Brass Compression Equal Elbow 10mm, 23847 Opal Brass Compression Equal Elbow 15mm, 19605 Opal Brass Compression Equal Elbow 22mm, 33123 Opal Brass Compression Equal Elbow 28mm, 64668 Opal Brass Compression Male Elbow 15mm x ½”, 33647 Opal Brass Compression Male Elbow 22mm x ¾”, 26618 Opal Brass Compression Female Elbow 15mm x ½”, 48823 Opal Brass Compression Female Elbow 22mm x ¾”, 29554 Opal Brass Compression Wallplate Elbow 15mm x ½”, 46354 Opal Brass Compression Wallplate Elbow 22mm x ¾”, 65566 Opal Brass Compression Bent Tap Connector 15mm x ½”, 17824 Opal Brass Compression Bent Tap Connector 22mm x ¾”, 91205 Flowflex Brass Compression Equal Tee 10mm, 22749 Opal Brass Compression Equal Tee 15mm, 67294 Opal Brass Compression Equal Tee 22mm, 92176 Opal Brass Compression Equal Tee 28mm, 98758 Opal Brass Compression Reduced Branch Tee 22 x 22 x 15mm, 79889 Opal Brass Compression Reduced Branch Tee 28 x 28 x 15mm, 81926 Opal Brass Compression Reduced Branch Tee 28 x 28 x 22mm, 27062 Opal Brass Compression Reduced End Tee 22 x 15 x 22mm, 84560 Opal Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm.

Approval Holder:: Toolstation Ltd.

Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #250604024

Range of compression fittings with brass, chrome plated brass bodies. COM RANGE OF COM For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250604024
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 8MM – 54MM & ¼” – 2”
Marking:: Lawton & size on compression nut.
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Bent Tap Connector Compression COMBTC0151/2 – 15mm x ½” Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression COMCP008 – 08mm COMCP010 – 10mm COMCP015 – 15mm COMCP022 – 22mm COMCP028 – 28mm COMCP035 – 35mm COMCP042 – 42mm COMCP054 – 54mm Reducer Coupler COMCP01008 – 10mm x 08mm COMCP01508 – 15mm x 08mm COMCP01510 – 15mm x 10mm COMCP01512 – 15mm x 12mm COMCP02215 – 22mm x 15mm COMCP02815 – 28mm x 15mm COMCP02822 – 28mm x 22mm COMCP03522 – 35mm x 22mm COMCP03528 – 35mm x 28mm 90 Degree Elbow Compression COMEL008 – 08mm COMEL010 – 10mm COMEL015 – 15mm COMEL022 – 22mm COMEL028 – 28mm COMEL035 – 35mm COMEL042 – 42mm COMEL054 – 54mm 45 Degree Elbow Compression COMEL01545 – 15mm COMEL02245 – 22mm COMEL02845 – 28mm 90 Degree Elbow Compression Chrome COMEL015CP – 15mm COMEL022CP – 22mm COMEL028CP – 28mm COMEL035CP – 35mm COMEL042CP – 42mm COMEL054CP – 54mm Equal Tee Compression COMTE008 – 08mm COMTE010 – 10mm COMTE015 – 15mm COMTE022 – 22mm COMTE028 – 28mm COMTE035 – 35mm COMTE042 – 42mm COMTE054 – 54mm Equal Tee Compression Chrome COMTE015CP – 15mm COMTE022CP – 22mm COMTE028CP – 28mm COMTE035CP – 35mm COMTE042CP – 42mm COMTE054CP – 54mm Cross Tee Compression COMCR015 – 15mm COMCR022 – 22mm COMCR028 – 28mm Male Iron Coupling Compression COMCPMI0081/4 – 08mm x ¼” COMCPMI0101/4 – 10mm x ¼” COMCPMI0103/8 – 10mm x 3/8” COMCPMI0151/4 – 15mm x ¼” COMCPMI0153/8 – 15mm x 3/8” COMCPMI0151/2 – 15mm x ½” COMCPMI0153/4 – 15mm x ¾” COMCPMI0221/2 – 22mm x ½” COMCPMI0223/4 – 22mm x ¾” COMCPMI0221 – 22mm x 1 “ COMCPMI0283/4 – 28mm x ¾” COMCPMI0281 – 28mm x 1” COMCPMI03511/4 – 35mm x 1 ¼” COMCPMI04211/2 – 42mm x 1 ½” COMCPMI0542 – 54mm x 2” Male Iron Coupling Chrome Compression COMCPMI0151/2CP – 15mm x ½” COMCPMI0223/4CP – 22mm x ¾” Female Iron Coupling Compression COMCPFI0101/4 – 10mm x ¼” COMCPFI0151/4 – 15mm x ¼” COMCPFI051/2 – 15mm x ½” COMCPFI0153/4 – 15mm x ¾” COMCPFI0221/2 – 22mm x ½” COMCPFI0223/4 – 22mm x ¾” COMCPFI0221 – 22mm x 1 “ COMCPFI0281 – 28mm x 1” COMCPFI03511/4 – 35mm x 1 ¼” COMCPFI04211/2 – 42mm x 1 ½” COMCPFI0542 – 54mm x 2” Female Iron Coupling Chrome Compression COMCPFI0151/2CP – 15mm x ½” COMCPFI0223/4CP – 22mm x ¾” Female Iron Elbow Chrome Compression COMELFI0151/2CP – 15mm x ½” COMELFI0223/4CP – 22mm ¾” COMELFI0221CP – 22mm x 1” Male Iron Elbow Compression COMELMI0151/2 – 15mm x ½” COMELMI0153/4 – 15mm x ¾” COMELMI0223/4 – 22mm x ¾” COMELMI0281 – 28mm x 1” COMELMI03511/4 – 35mm x 1 ¼” Female Iron Elbow Compression COMELFI0151/2 – 15mm x ½” COMELFI0153/4 – 15mm x ¾” COMELFI0221/2 – 22mm x ½” COMELFI0223/4 – 22mm x ¾” COMELFI0221 – 22mm 1 “ COMELFI0281 – 28mm x 1” COMELFI03511/4 – 35mm x 1 ¼” COMELFI04211/2 – 42mm x 1 ½” COMELFI0542 – 54mm x 2” Male Iron Elbow Chrome Compression COMELMI0151/2CP – 15mm x ½” COMELMI0223/4CP – 22mm x ¾” Wallplate Elbow Compression COMELWL0151/2 – 15mm x ½” COMELWL0223/4 – 22mm x ¾” Wallplate Elbow Chrome Compression COMELWL0151/2CP – 15mm x ½” Male Iron Coupler Taper Thread COMTTCPMI0151/2 – 15mm x ½” COMTTCPMI0223/4 – 22mm x ¾” COMTTCPMI0281 – 28mm x 1” Male Coupler Ext Taper Thread COMETTCPMI0223/4 – 22mm x ¾” Crossover Compression COMC022 – 22mm End Cap Compression COMEC008 – 08mm COMEC010 – 10mm COMEC015 – 15mm COMEC022 – 22mm COMEC028 – 28mm COMEC035 – 35mm COMEC042 – 42mm COMEC054 – 54mm End Cap Compression Chrome Plated COMEC015CP – 15mm COMEC022CP – 22mm COMEC028CP – 28mm COMEC035CP – 35mm COMEC042CP – 42mm COMEC054CP – 54mm Red Tee Compression COMTE0151522 – 15mm x 15mm x 22mm COMTE0221515 – 22mm x 15mm x 15mm COMTE0221522 – 22mm x 15mm x 22mm COMTE0222215 – 22mm x 22mm x 15mm COMTE0281528 – 28mm x 15mm x 28mm COMTE0282228 – 28mm x 22mm x 28mm COMTE0282815 – 28mm x 28mm x 15mm COMTE0282822 – 28mm x 28mm x 22mm Female Tee Compression COMTEFI015151/2 – 15mm x 15mm x ½” COMTEFI022221/2 – 22mm x 22mm x ½” COMTEFI022223/4 – 22mm x 22mm x ¾” COMTEFI028281 – 28mm x 28mm x 1” Red Tee Chrome Compression COMTE0151522CP – 15mm x 15mm x 22mm COMTE0221515CP – 22mm x 15mm x 15mm COMTE0222215CP – 22mm x 22mm x 15mm COMTE0222228CP – 22mm x 22mm x 28mm Reducing Sets Compression COMRS0108 – 10mm x 08mm COMRS0158 – 15mm x 08mm COMRS01510 – 15mm x 10mm COMRS02215 – 22mm x 15mm COMRS02822 – 28mm x 22mm COMRS03515 – 35mm x 15mm COMRS03522 – 35mm x 22mm COMRS03528 – 35mm x 28mm COMRS04215 – 42mm x 15mm COMRS04222 – 42mm x 22mm COMRS04228 – 42mm x 28mm COMRS04235 – 42mm x 35mm COMRS05422 – 54mm x 22mm COMRS05428 – 54mm x 28mm COMRS05435 – 54mm x 35mm COMRS05442 – 54mm x 42mm Tank Connector Compression COMTC015 – 15mm COMTC022 – 22mm COMTC028 – 28mm COMTC035 – 35mm COMTC042 – 42mm COMTC054 – 54mm Repair Coupling Compression COMRCP015 – 15mm COMRCP022 – 22mm Straight Tap Connect Compression COMSTC0151/2 – 15mm x ½” COMSTC0153/4 – 15mm x ¾” Red Elbow Compression COMREL02215 – 22mm x 15mm

Approval Holder:: The Lawton Tube Company Ltd.

Company Name
The Lawton Tube Company Ltd.
Address
Torrington Avenue, Coventry
Postcode
CV4 9AB
Country
United Kingdom
Phone
+44 24 7646 6203 or 024 7646 6203
General Email
mlis@lawtontubes.co.uk

View All Listings by this Company

WRAS Approval Number: #250602010

Twistloc’ range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure/temperature: 12.5 Bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250602010
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm, 15mm, 22mm, 28mm
Marking:: TLC (TwistLoc logo) and size on body
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: ‘Twistloc’ range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #240404724

"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240404724
Size:: Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.
Marking:: IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:: Hevac Ltd

Company Name
Hevac Ltd
Address
Muirfield Drive Naas Road Dublin 12
Postcode
D12 X0A3
Country
Ireland
Phone
0035 314 191924
General Email
dave.grenville@hevac.ie

View All Listings by this Company
Manufacturer:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company
Manufacturer:: IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

WRAS Approval Number: #250602052

'PlumbRight' range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure 12.5 bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250602052
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 10mm, 15mm, 22mm, 28mm
Marking:: TLC (TwistLoc logo) and size on body
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: 'PlumbRight' range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:: City Plumbing

Company Name
City Plumbing
Address
Highbourne House, 1 Eldon Way, Crick, Northamptonshire
Postcode
NN6 7SL

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200

View All Listings by this Company

WRAS Approval Number: #2309384

Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2309384
Size:: See model.
Marking:: Lawton tubes logo, EN1254 and size on body.
Installation Requirements:: R001
Expiry date:: 30/09/2028
Model:: SB-EFCOMI0151/2 CORE 15mm X 1/2" Male Adaptor Brass N3015 SB-EFCOMI0153/4 CORE 15mm X 3/4" Male Adaptor Brass SB-EFCOMI0223/4 CORE 22mm X 3/4" Male Adaptor Brass N3022 SB-EFCOMI0281 CORE 28mm X 1" Male Adaptor Brass N3028 SB-EFCOMI03511/4 CORE 35mm X 1.1/4" Male Adaptor Brass SB-EFCOMI04211/2 CORE 42mm X 1.1/2" Male Adaptor Brass SB-EFCOMI0542 CORE 54mm X 2" Male Adaptor Brass SB-EFCP015 CORE 15mm Coupler EF N1015 SB-EFCP022 CORE 22mm Coupler EF N1022 SB-EFCP028 CORE 28mm Coupler EF N1028 SB-EFCP035 CORE 35mm Coupler EF SB-EFCP042 CORE 42mm Coupler EF SB-EFCP054 CORE 54mm Coupler EF SB-EFCP06 CORE 66.7mm Coupler EF SB-EFCP076 CORE 76.1mm Coupler EF SB-EFCP108 CORE 108mm Coupler EF SB-EFEC015 CORE 15mm End Cap EF N61015 SB-EFEL015 CORE 15mm 90° Elbow EF N12015 SB-EFEL022 CORE 22mm 90° Elbow EF N12022 SB-EFEL028 CORE 28mm 90° Elbow EF N12028 SB-EFEL035 CORE 35mm 90° Elbow EF N12035 SB-EFEL042 CORE 42mm 90° Elbow EF SB-EFEL054 CORE 54mm 90° Elbow EF SB-EFEL067 CORE 66.7mm 90° Elbow EF SB-EFEL076 CORE 76.1mm 90° Elbow EF SB-EFEL108 CORE 108mm 90° Elbow EF SB-EFELS015 CORE 15mm 90° Street Elbow EF N12S015 SB-EFELS022 CORE 22mm 90° Street Elbow EF N12S022 SB-EFRED02215 CORE 22mm X 15mm Fitting Reducer EF N6022015 SB-EFRED02822 CORE 28mm X 22mm Fitting Reducer EF N6028022 SB-EFTE015 CORE 15mm Equal Tee EF N24015 SB-EFTE022 CORE 22mm Equal Tee EF N24022 SB-EFTE028 CORE 28mm Equal Tee EF SB-EFTE035 CORE 35mm Equal Tee EF SB-EFTE042 CORE 42mm Equal Tee EF SB-EFTE054 CORE 54mm Equal Tee EF SB-EFTE067 CORE 66.7mm Equal Tee EF SB-EFTE076 CORE 76.1mm Equal Tee EF SB-EFTE108 CORE 108mm Equal Tee EF SB-EFTE0221522 CORE 22mm X 15mm X 22mm Reducer Tee EF N26022015022 SB-EFTE0222215 CORE 22mm X 22mm X 15mm Reducer Tee EF N25022015

Approval Holder:: Smith Brothers Stores Limited

Company Name
Smith Brothers Stores Limited
Address
Unit V2 Winchester Avenue, Blaby, Leicester
Postcode
LE8 4GZ
Phone
0116 222 7330
General Email
kel.phillips@sbs.co.uk

View All Listings by this Company
Manufacturer:: The Lawton Tube Company Ltd.

Company Name
The Lawton Tube Company Ltd.
Address
Torrington Avenue, Coventry
Postcode
CV4 9AB
Country
United Kingdom
Phone
+44 24 7646 6203 or 024 7646 6203
General Email
mlis@lawtontubes.co.uk

View All Listings by this Company

WRAS Approval Number: #250515011

‘EPH_WSP19_XXXX’ range of brass end feed and threaded fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250515011
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Size and/or DOZ on body.
Installation Requirements:: R001
Expiry date:: 31/05/2030
Model:: End Feed Fittings: Air vent cap: EPH_WSP19_0593 - 15mm. Wall Plate Elbow: EPH_WSP19_0608 - 15mm * ½” BSP (M). Male Coupler: EPH_WSP19_0618 - 15mm * ½” BSP (M), EPH_WSP19_0619 - 15mm * ¾” BSP (M), EPH_WSP19_0625 - 22mm * ¾” BSP (M). Female Coupler: EPH_WSP19_0635 - 15mm * ½” BSP (F), EPH_WSP19_0642 - 22mm * ¾” BSP (F). Female Elbow: EPH_WSP19_0663 - 15mm * ½” BSP (F). Male Elbow: EPH_WSP19_0676 - 15mm * ½” BSP (M). Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F), EPH_WSP19_0720 - ⅜” BSP (F), EPH_WSP19_0721 - ½” BSP (F) - CHROME, EPH_WSP19_0721A - ½” BSP (F), EPH_WSP19_0722A - ¾” BSP (F), EPH_WSP19_0723 - 1" BSP (F). Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (M), EPH_WSP19_0727 - ¾” BSP (M), EPH_WSP19_0724 - ¼” BSP (M), EPH_WSP19_0728 - 1" BSP (M). Threaded Brass Reducing Bush: EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F), EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F), EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F), EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F), EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F). Threaded Brass Hexagon Nipple: EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M), EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M), EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M), EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M), EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M). Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F), EPH_WSP19_0802A - ¾” BSP (F). Threaded Brass Female Socket: EPH_WSP19_0841 - ¼” BSP (F), EPH_WSP19_0843 - ½” BSP (F), EPH_WSP19_0844 - ¾” BSP (F), EPH_WSP19_0845 - 1” BSP (F). Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M), EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M). Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer.

Approval Holder:: Hangzhou DOZ Import & Export Co., Ltd

Company Name
Hangzhou DOZ Import & Export Co., Ltd
Address
Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053
Country
China
Phone
86 571 28180555

View All Listings by this Company
Manufacturer:: Jiangxi Avonflow Hvac Tech Co., Ltd

Company Name
Jiangxi Avonflow Hvac Tech Co., Ltd
Address
No.97, Xingye Avenue, Economic Development Zone, Shangrao City Jiangxi Province
Country
China

View All Listings by this Company

WRAS Approval Number: #250904702

Range of pumps, with stainless steel bodies, impellers and shaft. Maximum working pressure 10.0 bar. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250904702
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Wilo, made in Korea, Model No., Serial No., website address, & other tech info on data label. Wilo printed on control panel.
Installation Requirements:: R001 R415
Expiry date:: 30/09/2030
Model:: PBI-L203EA - Suction 25A(1”) Discharge 25A(1”) PBI-L204EA - Suction 25A(1”) Discharge 25A(1”) PBI-L205EA - Suction 25A(1”) Discharge 25A(1”) PBI-L402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-L802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-L803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD203EA - Suction 25A(1”) Discharge 25A(1”) PBI-LD402EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD403EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD404EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD405EA - Suction 32A(1 1/4”) Discharge 25A(1”) PBI-LD802EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) PBI-LD803EA - Suction 40A(1 1/2”) Discharge 32A(1 1/4”) 1 - Series PBI-L: Electronic Boosting Pump Variable Speed Pump(Inverter Pump). 2 - Number of Pumps None/blank : Single Type (One Pump), D: Duplex Type (Two Pumps). 3 - Rated Flow capacity 2 : 2㎥/hr, 4 : 4㎥/hr, 8 : 8㎥/hr. 4 - Number of Impellers 02 : 2 Impellers, 03 : 3 Impellers, 04 : 4 Impellers, 05 : 5 Impellers. 5 - Power 60Hz L: 110V ~, J: 120V ~ , 127V~, M: 220V~ D: 110V/220V~, I: 220/380V 3~, T: 220V 3~, U: 380V 3~, N: 440V 3~, R: 480V 3~. 50Hz Z: 110V ~, C: 120V ~, 127V~, E: 220V ~, F: 110V/220V ~, G: 220/380V 3~, H: 220V 3~, Q: 380V 3~, Y: 440V 3~. 6 - Automatic mode. None/blank : non automatic models A: models which equips themselves with components that are responsible for automatic mode.

Approval Holder:: WILO Pumps Ltd.

Company Name
WILO Pumps Ltd.
Address
46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company

WRAS Approval Number: #250312003

Range of shower handsets and overhead showers with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 250312003
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet only
Marking:: Jelong, WRAS on handset body or connection.
Installation Requirements:: R001 R040
Expiry date:: 31/03/2030
Proviso:: Open outlet only
Model:: A12231* 3F hand shower A12232* 3F hand shower A12131* 3F hand shower A18311* 1F hand shower A12011* 1F hand shower A14431* 3F hand shower A14441* 4F hand shower A15241* 4F hand shower A15331* 3F hand shower B27811* 1F shower head B27012* 1F shower head B26111* 1F shower head B23111* 1F shower head B23011* 1F shower head B23251* 5F shower head For Hand shower * denotes: CH=CHROME PLATED BN=BRUSH NICKEL, GM=GUN METAL, G=GOLD, RG=ROSE GOLD For Shower head * denotes: CH=CHROME PLATED MB=MATT BLACK, W= WHITE, BN=BRUSH NICKEL, ORB=OIL RUBBED BRONZE， GM=GUN METAL, G=GOLD, RG=ROSE GOLD

Approval Holder:: Xiamen Jelong Plumbing Co.,Ltd

Company Name
Xiamen Jelong Plumbing Co.,Ltd
Address
Unit 402, No. 598 Guankou South Road Jimei District Xiamen
Country
China

View All Listings by this Company
Manufacturer:: Xiamen Jelong Plumbing Co.,Ltd

Company Name
Xiamen Jelong Plumbing Co.,Ltd
Address
Unit 402, No. 598 Guankou South Road Jimei District Xiamen
Country
China

View All Listings by this Company

WRAS Approval Number: #260114303

Section:: 1800 Taps
Description:: A Range of Pillar tap(s).
Deck mounted Capable of achieving AUK2 Tap gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R005
Expiry date:: 31/01/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
902001 X XXX	VARIOUS	1/2” BSP male inlet.	10.0 bar	85 °C	PPI	BODY	No	Non-rising spindle	Metal Backnuts	Flow Straightener
902002 X XXX	VARIOUS	3/4” BSP male inlet.	10.0 bar	65 °C	PPI	BODY	No	Non-rising spindle	Metal Backnuts	Flow Straightener

Notes & Further Information: X XXX Denotes the following: First X: Different handle option and the second, third & fourth XXX for different finishes: Handles: F – Cross Top Type Chrome – No suffix, brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturers:: PPI XIAMEN INDUSTRY CO LTD

WRAS Approval Number: #251102301

Section:: 1800 Taps
Description:: A Pillar tap(s).
Deck Mounted, Capable of achieving AUK3 tap gap. Incorporating stainless steel braided, thermoplastic silicone rubber (TPSiV) lined flexible hoses.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R009
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
16 530 xx0	Various	G 3/8	10 bar	60 °C	AXOR	on body	Yes	1/4 Turn ceramic disk	C-plate	Aerator

Notes & Further Information: Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:: Hansgrohe SE

Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

WRAS Approval Number: #260104002

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. For non-potable water use only. Maximum working pressure 10.0 bar. Maximum operating temperature see models.

Section:: 1980 Valves
Section Subtitle:: Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:: 260104002
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: Caleffi logo on body.
Installation Requirements:: R001 R200
Expiry date:: 31/01/2031
Model:: 502930 TH 3/8" 110°C 502934 CST 3/8" 110°C 502420 1/4" 115 °C 502430 3/8" 115 °C 502430 CON 3/8" 115 °C 502430 CST 3/8" 115 °C 502431 BSC 3/8" 115 °C 502434 CST 3/8" 115 °C 502435 CST 3/8" 115 °C 502530 TH 3/8" 110°C 502530 TH1 3/8" 110°C 502641 3/8" 115°C 502643A 1/2" NPT 115°C 502533 3/8" 110°C 502533 FRT 3/8" 110°C 502533 TAK 3/8" 110°C 502543 3/8" 110°C 502533 RIF 3/8" 110°C 502530 3/8" 110°C 502141 1/2" 110 °C 502142 1/2" 110 °C 502145 RIF 1/2" 110 °C 502145 RSR 1/2" 110 °C 502630 3/8" 115°C 502630 CST 3/8" 115°C 502636 CST 3/8" 115°C 502638 CST 3/8" 115°C 502638 OEM 3/8" 115°C 502631 CST 3/8" 115°C 502822 1/4" NPT 502620A 1/4" NPT 115°C 502610A 1/8" NPT 115°C 502630 WLF 3/8" 115°C 502634 CST 3/8" 115°C 502640 1/2" 115°C 502649 1/2" 115°C 502649 CST 1/2" 115°C 502730 3/8" 110°C 502730 CST 3/8" 110°C 502730 BSC 3/8" 110°C 502730 NTR 3/8" 110°C 502710A 1/8" NPTF 110°C 502720A 1/4" NPTF 110°C 502030 3/8" 120 °C 502030 CON 3/8" 120 °C 502030 CST 3/8" 120 °C 502035 CST 3/8" 120 °C 502037 CST 3/8" 120 °C 502037 VLL 3/8" 120 °C 502037 WLF 3/8" 120 °C 502038 CST 3/8" 120 °C 502020 CST 1/4" 120 °C 502034 CST 3/8" 120 °C 502130 3/8" 110 °C 502031 3/8" 120 °C 502130 TH1 3/8" 110 °C 502033 CST 3/8" 120 °C 502015A 1/8" NPT 120 °C 502015 B&G 1/8" NPT 120 °C 502015A WEB 1/8" NPT 120 °C 502015 MTR 1/8" NPT 120 °C 502040A 1/2" NPT 120 °C 502040A WEB 1/2" NPT 120 °C 502043A 1/2" NPT 120 °C 502043A CST 1/2" 120 °C 502044 CST 1/2" 120 °C 502040 1/2" 120 °C 502040 CST 1/2" 120 °C 502043 1/2" 120 °C 502043 CST 1/2" 120 °C 502140 1/2" 110 °C 502140 FRT 1/2" 110 °C 502041 1/2" 120 °C 502041 MI 1/2" 120 °C 502046 IMM 1/2" 120 °C 502221 1/4" 120°C 502231 3/8" 120°C 502231 CST 3/8" 120°C 502232 TH 3/8" 120°C 502241 1/2" 120°C 502243A 1/2" NPTF 120°C 502343A 1/2" NPTF 120°C 502246 IMM 1/2" 120°C 502242 TH 1/2" 120°C 502115A 1/8" NPT 110 °C 502133 3/8" 110 °C 502131 3/8" 110 °C 502131 TH 3/8" 110 °C 502132 DEC 3/8" 110 °C 502130 CST 3/8" 110 °C 502130 FRT 3/8" 110 °C 502130 TAK 3/8" 110 °C 502130 TH 3/8" 110 °C 502135 RIF 3/8" 110 °C 502050 3/4" 120 °C 502051 3/4" 120 °C 502052 CST 3/4" 120 °C 502060 1" 120 °C 502055 120 °C 502061 1" 120 °C 502067 1" 120 °C 502400 CST Press fitting ø22,2 customer designed 115 °C 501500 3/4" 120 °C

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

WRAS Approval Number: #250915301

Section:: 2010 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control
Wall Mounted. Undefinable Air Gap – See IRN’s Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/09/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
T43014B	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T43084B	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T43014T	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T43084T	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T43034	Chromed	BSP 3/4" (M) x BSP 1/2" (M) offset unions	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T43064B	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T43194B	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T44014B	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T44054B	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T44014T	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable
T44054T	Chromed	BSP 3/4" (F)	10 bar	85 °C	Company logo	Body	No	1/4 Turn ceramic disk	Not Applicable	Not Applicable

Approval Holder:: ZHEJIANG XINDONG SANITARY WARE CO.,LTD.

Company Name
ZHEJIANG XINDONG SANITARY WARE CO.,LTD.
Address
XUANMEN INDUSTRIAL ZONE YUHUAN CHINA
Country
CHINA

View All Listings by this Company
Manufacturers:: Zhejiang Xindong Sanitary Ware Co., Ltd

WRAS Approval Number: #250916305

Section:: 2010 Shower Valves
Description:: A Range of Shower valve(s) with thermostatic temperature control
Wall Mounted Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R020
Expiry date:: 30/09/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
814109	chrome	3/4”	5 bar	65 °C	KINEN	on body	No	1/4 Turn ceramic disk			Shower Hose, Handset, Riser Rail,
814111	chrome	3/4”	5 bar	65 °C	KINEN	on body	No	1/4 Turn ceramic disk			Shower Hose, Handset, Riser Rail,

Approval Holder:: Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

Company Name
Guangdong Kinen Sanitary Ware Industrial Co., Ltd.
Address
No.57, Sijiu Road, Zhishan Town, Heshan City, Guangdong
Country
China
General Email
2894475300@qq.com

View All Listings by this Company
Manufacturers:: Guangdong Kinen Sanitary Ware Industrial Co., Ltd.

WRAS Approval Number: #250602711

Range of spring loaded, resilient trim, non-return valves with, stainless steel bodies and plunger with EPDM seals. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 2185 Valves
Section Subtitle:: Non-return, spring loaded, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection.
WRAS Approval Number:: 250602711
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ¼” - 4” BSP (F)
Marking:: Mondeo, flow arrow, size, pressure and date of manufacture (DD/MM/YY) on body
Installation Requirements:: R001
Expiry date:: 30/06/2030
Model:: Small DW 900103A 900106A 900110A 900112A 900117A 900120A Idrja DW 900010A 900400A 900015A 900410A 900020A 900420A 900025A 900430A 900028A 900440A 900056A 900451A 900461A 900471A Idrja DW MFA 900017MFA 900022MFA 900027MFA 900030MFA 900017FMA 900022FMA

Manufacturer:: Mondeo Srl.

Company Name
Mondeo Srl.
Address
STRADA DEL CAPITELLO SN MONTECCHIO MAGGIORE
Country
Italy

View All Listings by this Company

WRAS Approval Number: #250712701

A swing gate, resilient trim, non-return valve with blue epoxy coated ductile iron body. Maximum working pressure: 25bar Maximum operating temperature: 85°C.

Section:: 2188 Valves
Section Subtitle:: Non-return, swing gate, resilient trim. Devices listed under this heading do not provide sufficient protection against backflow to meet the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. Therefore, not considered suitable for Backflow Protection
WRAS Approval Number:: 250712701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN200 - Flanged.
Marking:: Jinan Meide Casting Co. Ltd. Logo and product info on data plate. PN, size, flow arrow, DI, date (YYYY) & MECH logo on body.
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: H44X2-PN25

Approval Holder:: Jinan Meide Casting Co., Ltd

Company Name
Jinan Meide Casting Co., Ltd
Address
Meide Science and Technology Park, Pingyin Industrial Park, Jinan Shandong Province
Country
China
Phone
86-531-87856308

View All Listings by this Company

WRAS Approval Number: #240702715

Range of adjustable, in-line pressure reducing valves with blue epoxy coated, cast iron bodies. 447 70 models: maximum supply pressure 25.0 bar, outlet pressure range 1.5 to 7.0 bar. Maximum operating temperature 60°C.

Section:: 2200 Valves
Section Subtitle:: Pressure reducing.
WRAS Approval Number:: 240702715
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: DN50 to DN125 flanged inlet and outlet
Marking:: Goetze, model and set pressure range on label on body. Flow arrow on body.
Installation Requirements:: R001
Expiry date:: 31/07/2029
Model:: 447 70 XX Pressure Reducing Valves, Where XX = outlet pressure range

Approval Holder:: Oventrop UK Limited

Company Name
Oventrop UK Limited
Address
Oventrop House Unit 11 Hatch Industrial Park Greywell Road Hatch Basingstoke
Postcode
RG24 7NG
Country
United Kingdom
Phone
+44 (0) 1256 330 441
General Email
mikewise@oventrop.co.uk

View All Listings by this Company
Manufacturer:: Goetze KG Armaturen

Company Name
Goetze KG Armaturen
Address
Robert-Mayer-Str. 21 Ludwigsburg
Postcode
71636
Country
Germany
Phone
+49 7141 488 94 678
General Email
d.braun@goetze.de

View All Listings by this Company
Manufacturer:: Goetze KG Armaturen

Company Name
Goetze KG Armaturen
Address
Robert-Mayer-Str. 21 Ludwigsburg
Postcode
71636
Country
Germany
Phone
+49 7141 488 94 678
General Email
d.braun@goetze.de

View All Listings by this Company

WRAS Approval Number: #251008701

Range of pre-set pressure relief valves with brass or DZR brass bodies and EPDM diaphragms. The valves are fitted with hand operated easing gear. Pre-set pressure 3.0 bar for all models. Maximum operating temperature 85°C.

Section:: 2210 Valves
Section Subtitle:: Pressure relief.
WRAS Approval Number:: 251008701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Caleffi logo, flow arrow, PN and size on the body. CR on DZR brass version.
Installation Requirements:: R001 R200
Expiry date:: 31/10/2030
Proviso:: For closed circuit use only.
Model:: A312012 CST 19.9 mm manifold fast fit x ½” BSP (F), A312400 CST 17.6 mm manifold fast fit x ½ BSP (F), A312401 CST 19.9 mm manifold fast fit x ½” BSP (F), A312413 WSC 19.8 mm manifold fast fit x ½” BSP (F), A312414 CST 19.9 mm manifold fast fit x ½ BSP (M), A312420 CST 22 mm manifold fast fit, A312420 OEM 22 mm manifold fast fit x ½” BSP (F), A312430 CST ½” BSP (M) x ½” BSP (M), A312438 CST 19.9 mm manifold fast fit x ½” BSP (M), A312439 CST 19.9 mm manifold fast fit x ½” BSP (F) (DZR), A314402 BSC ½” BSP (M) x ½” BSP (F), A314437 CST ½” BSP (M) x 15mm compression, A313001 FRQ 17 mm manifold fast fit, A314432 CST ½” BSP (M) x ½” BSP (F).

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

WRAS Approval Number: #250404711

Range of normally closed (NC), solenoid valves with plastic bodies and EPDM diaphragm. Models with push-fit connections are for use with copper pipe (manufactured to EN 1057) and PTFE pipe. The products incorporate a plastic or stainless steel filter on the inlet, (except for models with swivel nut, push-fit and nozzle inlets, as well as the 44.007.126 and 01.021.126 models) . The 44.007.126 model incorporates a Y-pattern stainless-steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperatures: Cold water use only, 65°C or 90°C for models marked with ℗ - Please consult model section for further details.

Section:: 2240 Valves
Section Subtitle:: Solenoid, plastic.
WRAS Approval Number:: 250404711
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: AuK Muller, type (model), voltage, maximum water temperature (Tm 23°C, 65°C or 90°C as appropriate), date of manufacture WW/YY on adhesive label on coil. AuK Muller logo, flow arrow, pressure rating and model moulded on body. Models suitable for 90°C are also marked with a ℗ on the base of the body.
Installation Requirements:: R001 R008
Expiry date:: 30/04/2030
Model:: Cold water use only models: 01.007.115: Inlet: G 3/8” (M), 01.021.126: Inlet: G 1” (M). 65°C models: 01.007.111: Inlet: G 1/2” (M); G 3/8”(M); G 3/4” (M), 01.007.115: Inlet: G 3/4” (M), 01.007.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Push-Fit; Ø 8 Push-Fit, 44.007.126: Inlet: G 1/2” (M); G 3/4” (M), 29.007.215: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M), 01.010.115: Inlet: G 3/4" (M), 01.010.125: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); 3/8” Nozzle; 3/8” Push-Fit; G 3/4” (F) ; 3/4-11,5 NH (F); G 1/2” (F), 01.010.215: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.216: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.315: Inlet: G 3/4” (M), 01.010.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.010.415: Inlet: G 3/4” (M), 01.010.425: Inlet: G 3/4” (M), 29.010.226: Inlet: G 3/4” (M), 29.010.326: Inlet: G 3/4” (M), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); 3/4-11,5 NH (M), 01.013.215: Inlet: G 3/4” (M), 01.013.225: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 01.017.126: Inlet: G 3/4” (M, 15.017.325: Inlet: G 3/4” (M); 3/4-11,5 NH (M), 15.017.425: Inlet: G 3/4” (M); 3/4-11,5 NH (M). 90°C models (marked with a ℗): 01.010.115: Inlet: G 1/2” (M); G 3/4 (M), 01.010.125: Inlet: G 3/4” (M), 01.010.126: Inlet: G 1/2” (M); G 3/8” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F); G 1/2” (F), 01.013.115: Inlet: G 3/4” (M), 01.013.126: Inlet: G 1/2” (M); G 3/4” (M); G 3/4” (F); 3/4-11,5 NH (F), 01.017.115: Inlet: G 3/4” (M), 01.017.126: Inlet: G 3/4” (M); 3/4-11,5 NH (M).

Approval Holder:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company
Manufacturer:: A.u.K. Müller GmbH & Co. KG

Company Name
A.u.K. Müller GmbH & Co. KG
Address
Dresdener Str. 162, D-40595 Düsseldorf
Country
Germany
Phone
+49 211 7391 0
General Email
info@akmueller.de

View All Listings by this Company

WRAS Approval Number: #250915006

Range of inline brass bodied or chrome plated brass bodied spherical valves, with a chrome plated brass ball and EPDM ‘O’-rings. SVB66MB and SV44MB models are lever operated. SV66MBC and SVT64MBC are screwdriver operated. The products are for use with PE-X pipe (manufactured to BS 7291-3), PB pipe (manufactured to BS 7291-2) and copper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar. Cold water use only. From March 2026: Maximum operating temperature 65°C.

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 250915006
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: Twistloc company logo (‘TLC’) and size on collet. SVB66MB and SVB44MB models are also marked with size and PN on the body, and Twistloc on the lever. (Twistloc is a brand of SNC Corporation).
Installation Requirements:: R001
Expiry date:: 30/09/2030
Model:: SVB66MB (Ball valve): 15mm pushfit x 15mm pushfit, SVB44MB (Ball valve): 22mm pushfit x 22mm pushft, SV66MBC (lsolating valve) (chrome plated): 15mm pushft x 15mm pushft, SVT64MBC (Isolating valve) (chrome plated): 15mm pushfit x ½ BSP captive nut.

Approval Holder:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200
General Email
nchoi@twistloc.com

View All Listings by this Company
Manufacturer:: SNC Corporation

Company Name
SNC Corporation
Address
30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon
Postcode
22825
Country
South Korea
Phone
+82-70-8795-3200
General Email
nchoi@twistloc.com

View All Listings by this Company