Range of copper capillary, bronze or brass end feed fittings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Non-metallic materials and components comply with BS6920 at 99°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2206359

Size:

See models

Marking:

FA.1512 and FA.2234 models only: Flowflex logo and 1254 on body. All other models: Flowflex logo, size and EN1254 on body.

Installation Requirements:

R001

Expiry date:

30/06/2027

Model:

Model: Bronze fittings: 4090G.15X1/2: End Feed Female Elbow 15mm x ½”, 4090G.22X1/2: End Feed Female Elbow 22mm x ½”, 4090G.22X3/4: End Feed Female Elbow 22mm x ¾”, 4090G.28X1: End Feed Female Elbow 28mm x 1", 4090G.35X1.1/4: End Feed Female Elbow 35mm x 1 ¼”, 4090G.42X1.1/2: End Feed Female Elbow 42mm x 1 ½”, 4090G.54X2: End Feed Female Elbow 54mm x 2". 4092G.15X1/2: End Feed Male Taper Elbow 15mm x ½”, 4092G.22X3/4: End Feed Male Taper Elbow 22mm x ¾”, 4092G.28X1: End Feed Male Taper Elbow 28mm x 1". 4130G.15X1/2X15: End Feed Female Branch Tee 15 x ½” x 15mm, 4130G.22X1/2X22: End Feed Female Branch Tee 22 x ½” x 22mm, 4130G.22X3/4X22: End Feed Female Branch Tee 22 x ¾” x 22mm, 4130G.28X1/2X28: End Feed Female Branch Tee 28 x ½” x 28mm. 4243G.15X1/2: End Feed Male Taper Adaptor 15mm x ½”, 4243G.15X3/8: End Feed Male Taper Adaptor 15mm x ⅜”, 4243G.15X3/4: End Feed Male Taper Adaptor 15mm x ¾”, 4243G.22X1/2: End Feed Male Taper Adaptor 22mm x ½”, 4243G.22X3/4: End Feed Male Taper Adaptor 22mm x ¾”, 4243G.22X1: End Feed Male Taper Adaptor 22mm x 1", 4243G.28X1: End Feed Male Taper Adaptor 28mm x 1", 4243G.35X1: End Feed Male Taper Adaptor 35mm x 1", 4243G.35X1.1/4: End Feed Male Taper Adaptor 35mm x 1 ¼”, 4243G.42X1.1/2: End Feed Male Taper Adaptor 42mm x 1 ½”, 4243G.54X2: End Feed Male Taper Adaptor 54mm x 2", 4270G.15X1/2: End Feed Female Adaptor 15mm x ½”. 4270G.15X3/8: End Feed Female Adaptor 15mm x ⅜”, 4270G.15X3/4: End Feed Female Adaptor 15mm x ¾”, 4270G.22X1/2: End Feed Female Adaptor 22mm x ½”, 4270G.22X3/4: End Feed Female Adaptor 22mm x ¾”, 4270G.22X1: End Feed Female Adaptor 22mm x 1", 4270G.28X1: End Feed Female Adaptor 28mm x 1", 4270G.35X1: End Feed Female Adaptor 35mm x 1", 4270G.35X1.1/4: End Feed Female Adaptor 35mm x 1 ¼”, 4270G.42X1.1/2: End Feed Female Adaptor 42mm x 1 ½”, 4270G.54X2: End Feed Female Adaptor 54mm x 2". Copper body/Bronze pipe socket fittings: 4341G.15X1/2: End Feed Male Union 15mm x ½”, 4341G.22X3/4: End Feed Male Union 22mm x ¾”, 4341G.28X1: End Feed Male Union 28mm x 1", 4341G.35X1.1/4: End Feed Male Union 35mm x 1 ¼”, 4341G.42X1.1/2: End Feed Male Union 42mm x 1 ½”, 4341G.54X2: End Feed Male Union 54mm x 2". Copper fittings: 5040.1: End Feed 45 Deg Street Elbow 10mm, 5040.12: End Feed 45 Deg Street Elbow 12mm, 5040.15: End Feed 45 Deg Street Elbow 15mm, 5040.22: End Feed 45 Deg Street Elbow 22mm, 5040.28: End Feed 45 Deg Street Elbow 28mm, 5040.35: End Feed 45 Deg Street Elbow 35mm, 5040.42: End Feed 45 Deg Street Elbow 42mm, 5040.54: End Feed 45 Deg Street Elbow 54mm. 5041.12: End Feed 45 Deg Elbow 12mm, 5041.15: End Feed 45 Deg Elbow 15mm, 5041.22: End Feed 45 Deg Elbow 22mm, 5041.28: End Feed 45 Deg Elbow 28mm, 5041.35: End Feed 45 Deg Elbow 35mm, 5041.42: End Feed 45 Deg Elbow 42mm, 5041.54: End Feed 45 Deg Elbow 54mm. 5085.15: End Feed Full Crossover 15mm, 5085.22: End Feed Full Crossover 22mm. 5086.15: End Feed Part Crossover 15mm, 5086.22: End Feed Part Crossover 22mm. 5090.08: End Feed Equal Elbow 8mm, 5090.10: End Feed Equal Elbow 10mm, 5090.12: End Feed Equal Elbow 12mm, 5090.15: End Feed Equal Elbow 15mm, 5090.22: End Feed Equal Elbow 22mm, 5090.28: End Feed Equal Elbow 28mm, 5090.35: End Feed Equal Elbow 35mm, 5090.42: End Feed Equal Elbow 42mm, 5090.54: End Feed Equal Elbow 54mm. 5092.10: End Feed Street Elbow 10mm, 5092.15: End Feed Street Elbow 15mm, 5092.22: End Feed Street Elbow 22mm, 5092.28: End Feed Street Elbow 28mm, 5092.35: End Feed Street Elbow 35mm, 5092.42: End Feed Street Elbow 42mm, 5092.54: End Feed Street Elbow 54mm. 5130.08: End Feed Equal Tee 8mm, 5130.10: End Feed Equal Tee 10mm, 5130.12: End Feed Equal Tee 12mm, 5130.15: End Feed Equal Tee 15mm, 5130.22: End Feed Equal Tee 22mm, 5130.28: End Feed Equal Tee 28mm, 5130.35: End Feed Equal Tee 35mm, 5130.42: End Feed Equal Tee 42mm, 5130.54: End Feed Equal Tee 54mm. 5130R.152215: End Feed Reduced Both Ends 15 x 22 x 15mm, 5130R.222822: End Feed Reduced Both Ends 22 x 28 x 22mm, 5130R.283528: End Feed Reduced Both Ends 28 x 35 x 28mm, 5130R.151212: End Feed Reduced Branch and End Tee 15 x 12 x 12mm, 5130R.221515: End Feed Reduced Branch and End Tee 22 x 15 x 15mm, 5130R.281515: End Feed Reduced Branch and End Tee 28 x 15 x 15mm, 5130R.281522: End Feed Reduced Branch and End Tee 28 x 22 x 15mm, 5130R.282215: End Feed Reduced Branch and End Tee 28 x 15 x 22mm, 5130R.282222: End Feed Reduced Branch and End Tee 28 x 22 x 22mm, 5130R.352222: End Feed Reduced Branch and End Tee 35 x 22 x 22mm, 5130R.352828: End Feed Reduced Branch and End Tee 35 x 28 x 28mm, 5130R.423535: End Feed Reduced Branch and End Tee 42 x 35 x 35mm, 5130R.544242: End Feed Reduced Branch and End Tee 54 x 42 x 42mm, 5130R.121012: End Feed Reduced Branch Tee 12 x 10 x 12mm, 5130R.151015: End Feed Reduced Branch Tee 15 x 15 x 10mm, 5130R.151215: End Feed Reduced Branch Tee 15 x 15 x 12mm, 5130R.221022: End Feed Reduced Branch Tee 22 x 10 x 22mm, 5130R.221522: End Feed Reduced Branch Tee 22 x 15 x 22mm, 5130R.281528: End Feed Reduced Branch Tee 28 x 15 x 28mm, 5130R.282228: End Feed Reduced Branch Tee 28 x 22 x 28mm, 5130R.351535: End Feed Reduced Branch Tee 35 x 15 x 35mm, 5130R.352235: End Feed Reduced Branch Tee 35 x 22 x 35mm, 5130R.352835: End Feed Reduced Branch Tee 35 x 28 x 35mm, 5130R.421542: End Feed Reduced Branch Tee 42 x 15 x 42mm, 5130R.422242: End Feed Reduced Branch Tee 42 x 22 x 42mm, 5130R.422842: End Feed Reduced Branch Tee 42 x 28 x 42mm, 5130R.423542: End Feed Reduced Branch Tee 42 x 35 x 42mm, 5130R.541554: End Feed Reduced Branch Tee 54 x 15 x 54mm, 5130R.542254: End Feed Reduced Branch Tee 54 x 22 x 54mm, 5130R.542854: End Feed Reduced Branch Tee 54 x 28 x 54mm, 5130R.543554: End Feed Reduced Branch Tee 54 x 35 x 54mm, 5130R.544254: End Feed Reduced Branch Tee 54 x 42 x 54mm, 5130R.121210: End Feed Reduced End Tee 12 x 10 x 12mm, 5130R.151510: End Feed Reduced End Tee 15 x 10 x 15mm, 5130R.222215: End Feed Reduced End Tee 22 x 15 x 22mm, 5130R.282815: End Feed Reduced End Tee 28 x 15 x 28mm, 5130R.282822: End Feed Reduced End Tee 28 x 22 x 28mm, 5130R.353515: End Feed Reduced End Tee 35 x 15 x 35mm, 5130R.353522: End Feed Reduced End Tee 35 x 22 x 35mm, 5130R.353528: End Feed Reduced End Tee 35 x 28 x 35mm, 5130R.424235: End Feed Reduced End Tee 42 x 35 x 42mm, 5130R.545442: End Feed Reduced End Tee 54 x 42 x 54mm. 5240.1008: End Feed Reducing Coupling 10 x 8mm, 5240.1508: End Feed Reducing Coupling 15 x 8mm, 5240.1510: End Feed Reducing Coupling 15 x 10mm, 5240.1512: End Feed Reducing Coupling 15 x 12mm, 5240.2215: End Feed Reducing Coupling 22 x 15mm, 5240.2815: End Feed Reducing Coupling 28 x 15mm, 5240.2822: End Feed Reducing Coupling 28 x 22mm, 5240.3522: End Feed Reducing Coupling 35 x 22mm, 5240.3528: End Feed Reducing Coupling 35 x 28mm, 5240.4222: End Feed Reducing Coupling 42 x 22mm, 5240.4228: End Feed Reducing Coupling 42 x 28mm, 5240.4235: End Feed Reducing Coupling 42 x 35mm, 5240.5422: End Feed Reducing Coupling 54 x 22mm, 5240.5428: End Feed Reducing Coupling 54 x 28mm, 5240.5435: End Feed Reducing Coupling 54 x 35mm, 5240.5442: End Feed Reducing Coupling 54 x 42mm. 5243.1008: End Feed Fitting Reducer 10 x 8mm, 5243.1210: End Feed Fitting Reducer 12 x 10mm, 5243.1508: End Feed Fitting Reducer 15 x 8mm, 5243.1510: End Feed Fitting Reducer 15 x 10mm, 5243.1512: End Feed Fitting Reducer 15 x 12mm, 5243.2212: End Feed Fitting Reducer 22 x 12mm, 5243.2215: End Feed Fitting Reducer 22 x 15mm, 5243.2812: End Feed Fitting Reducer 28 x 12mm, 5243.2815: End Feed Fitting Reducer 28 x 15mm, 5243.2822: End Feed Fitting Reducer 28 x 22mm, 5243.3515: End Feed Fitting Reducer 35 x 15mm, 5243.3522: End Feed Fitting Reducer 35 x 22mm, 5243.3528: End Feed Fitting Reducer 35 x 28mm, 5243.4215: End Feed Fitting Reducer 42 x 15mm, 5243.4222: End Feed Fitting Reducer 42 x 22mm, 5243.4228: End Feed Fitting Reducer 42 x 28mm, 5243.4235: End Feed Fitting Reducer 42 x 35mm, 5243.5415: End Feed Fitting Reducer 54 x 15mm, 5243.5422: End Feed Fitting Reducer 54 x 22mm, 5243.5428: End Feed Fitting Reducer 54 x 28mm, 5243.5435: End Feed Fitting Reducer 54 x 35mm, 5243.5442: End Feed Fitting Reducer 54 x 42mm. 5270.08: End Feed Straight Coupling 8mm, 5270.10: End Feed Straight Coupling 10mm, 5270.12: End Feed Straight Coupling 12mm, 5270.15: End Feed Straight Coupling 15mm, 5270.22: End Feed Straight Coupling 22mm, 5270.28: End Feed Straight Coupling 28mm, 5270.35: End Feed Straight Coupling 35mm, 5270.42: End Feed Straight Coupling 42mm, 5270.54: End Feed Straight Coupling 54mm. 5301.08: End Feed Stop End 8mm, 5301.10: End Feed Stop End 10mm, 5301.12: End Feed Stop End 12mm, 5301.15: End Feed Stop End 15mm, 5301.22: End Feed Stop End 22mm, 5301.28: End Feed Stop End 28mm, 5301.35: End Feed Stop End 35mm, 5301.42: End Feed Stop End 42mm, 5301.54: End Feed Stop End 54mm. C803SFEF.1: End Feed Bent Tap Connector 15mm x ½”, C803SFEF.2: End Feed Bent Tap Connector 22mm x ¾”. C805SCEF.4: End Feed Bent Cylinder Union 22mm x 1". C901EF.245: End Feed Metric Imperial Coupling 15mm x ½”, C901EF.25: End Feed Metric Imperial Coupling 22mm x ¾”, C901EF.26: End Feed Metric Imperial Coupling 28mm x 1", C901EF.27: End Feed Metric Imperial Coupling 35mm x 1 ¼”. C903SFEF.1: End Feed Straight Tap Connector 15mm x ½”, C903SFEF.2: End Feed Straight Tap Connector 15mm x ¾”, C903SFEF.3: End Feed Straight Tap Connector 22mm x ¾”. C904LEF.17: End Feed Long Fitting Reducer 15 x 8mm, C904LEF.18: End Feed Long Fitting Reducer 15 x 10mm. C905SCEF.4: End Feed Straight Cylinder Union 22mm x 1", C905SCEF.5: End Feed Straight Cylinder Union 28mm x 1". C906EF.05: End Feed Slip Coupling 15mm, C906EF.08: End Feed Slip Coupling 22mm, C906EF.09: End Feed Slip Coupling 28mm, C906EF.10: End Feed Slip Coupling 35mm. P803WPEF.2: End Feed Wallplate Elbow 15mm x ½”, P803WPEF.5: End Feed Wallplate Elbow 22mm x ¾”. Brass fittings: FA.1512: End Feed Female Adaptor 15mm x ½”, FA.2234: End Feed Female Adaptor 22mm x ¾”, FA.281: End Feed Female Adaptor 28mm x 1".

Product Images

Approval Holder:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. The 950513, 950514, 950501, 950503 & 950502 models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208817

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

CPS & date of manufacture MM/YY on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

237738, 237770, 950504, 950505, 950506, 950507, 950508, 950509, 953104 & 953105 Elbow 90 degree C X C: 8mm-108mm. 237740, 237769, 501657, 950510, 950511, 950512, 954699 & 954700 Street Elbow 90 degree Ftg X C: 8mm-108mm. 501643, 501764, 577336, 858891, 858892 & 858893 Street Elbow 45 degree Ftg X C: 8mm-108mm. 952608, 952609, 952610, 954695, 954696, 954697, 237739 & 237743 Elbow 45 degree C X C: 8mm-108mm. 954750 & 954751 Partial Crossover Ftg x C: 12mm-28mm. 954668, 954669 & 954670 Slip Straight Coupling C X C: 8mm-108mm. 237772, 237773, 950489, 950490, 950491, 950492, 950493, 950494, 953091, 953092 & 954675 Straight Coupling with groove C X C: 8mm-108mm. 237741, 799352, 950495, 950496, 953097, 953098, 954678, 954679, 954680, 954681, 954682, 954683, 954684, 954685, 954686, 954687, 954688, 954689, 954690, 908683, 908706 Fitting Reducer Ftg X C: 8mm-108mm. 950497, 953093, 953094, 953095, 953096, 953172 & 954691 Reducing Coupler C X C: 8mm-108mm and ½” - 1”. 237733, 237736, 950515, 950516, 950521, 950528, 950529, 953111, 953112 & 954713 Equal TEE CxCxC: 8mm-108mm. 237767,496119, 689717, 813643, 950517, 950518, 950519, 950520, 950522, 950523, 950526, 950527, 953169, 954717, 954719, 954720, 954721, 954722, 954723, 954724, 954727, 954728, 954729, 954730, 954732, 954733, 954734, 954735 & 954736 Reducing Tee CxCxC: 8mm-108mm. 237735, 237742, 945648, 950531, 952561, 953113, 953114, 954738, 954739 & 954740 Cap: 8mm-108mm. 953117 & 954749 Full Crossover C x C: 12mm-28mm. 909039 & 909054 Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). 952367 Return Bend Stop: 15mm-54mm. 909065, 909104, 950546 & 954776 Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). 954710 BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 954745 & 954746 STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. 950513 & 950514 Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. 950501, 950503 & 950502 Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Varipoint range of unvented water heaters with copper bodies, fitted with a temperature & pressure relief valve (7.0 bar) and supplied with a pressure relief valve (6.0 bar). Maximum working pressure 5.5 bar. Maximum operating temperature 85°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2209030

Size:

½” BSP male inlet and outlet.

Marking:

ZIP Varipoint and product info on adhesive label.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

VP103 – Varipoint II Overbasin 10ltr VP103UB – Varipoint II Underbasin 10ltr VP153 – Varipoint II Overbasin 15ltr VP153UB – Varipoint II Underbasin 15ltr

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Range of wall hung, gas fired, combination boilers providing domestic hot water via a plate heat exchanger. The primary circuit incorporates an integral expansion vessel and a pressure relief valve set at 3.0 bar. The product is supplied with a rigid pipe filling loop, followed by a separate isolation valve. The filling loop pipe attaches to the cold water inlet valve which incorporates a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3) on the branch to the filling loop. The primary circuit includes an isolation valve on the flow and return and is also supplied with two loose 22mm compression isolation valves and a filter. Maximum working pressure of the primary circuit is 2.5 bar and the maximum supply pressure to the secondary circuit is 10.0 bar. Max operating temperature 65°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2207350

Size:

Secondary: 15mm compression. Primary: 22mm compression.

Marking:

Ideal heating printed on front casing. Model and size printed on drop down door.

Installation Requirements:

R001 R140 R360

Expiry date:

31/07/2027

Proviso:

Supplied with a temporary filling loop. The filling loop must be installed with the appropriate backflow prevention device in accordance with clause G24.2, Guidance to the Water Supply (Water Fittings) Regulations 1999.

Model:

Logic Max Combi² C24 – UIN 228334, Logic Max Combi² C30 – UIN 228335, Logic Max Combi² C35 – UIN 228336, Logic + Combi² C24 – UIN 228329, Logic + Combi² C30 – UIN 228330, Logic + Combi² C35 – UIN 228331, Logic Combi² C24 – UIN 228307, Logic Combi² C30 – UIN 228308, Logic Combi² C35 – UIN 228309.

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Manufacturer:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Brass fitting Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

2209322

Size:

10mm spigot (F) x 10mm spigot (M).

Marking:

Navien on body.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

LL1466-04-09 Connector.

Product Images

Approval Holder:

KD Navien

Company Name

KD Navien

Address

95, Suworam-gil Seotan-myeon Pyeongtaek-si Gyeonggi-do, Seoul

Country

Korea, Republic of

View All Listings by this Company

Manufacturer:

Zhejiang Double-Lin Valves Co. Ltd.

Company Name

Zhejiang Double-Lin Valves Co. Ltd.

Address

Yanpan Hardware Industrial Area, Ganjiang Town, Yuhuan

Country

China

Phone

+86-576-89915157

View All Listings by this Company

Biofilm and water quality monitor incorporating a stainless-steel body and silicon seals. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2209020

Note:

The monitor has been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009 and has not been checked for accuracy by the Scheme.

Size:

¾” female BSP inlet x ¾” male BSP outlet.

Marking:

Sol, Model and product information on adhesive label on side of casing.

Installation Requirements:

R001

Expiry date:

30/09/2027

Model:

Solution MX1

Product Images

Approval Holder:

Waterman Environmental Group

Company Name

Waterman Environmental Group

Address

SOLmicroTEK Ltd., Cotswold Business Centre, 2, AP Ellis Road, Upper Rissington, Gloucestershire

Postcode

GL54 2QB

View All Listings by this Company

Range of vertical multistage booster pumps, with stainless steel bodies and impellors. Maximum working pressure: See models Maximum working temperature 85°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2205095

Size:

See Models

Marking:

Stuart Turner, CE, Max Temperature and other Technical info on Data Plates

Installation Requirements:

R001 R415

Expiry date:

31/05/2027

Model:

VM(.) 1 >> Size from 2 to 39 stages VM(.) 3 >> Size from 2 to 33 stages VM(.) 5 >> Size from 2 to 27 stages VM(.) 10 >> Size from 2 to 23 stages VM(.) 15 >> Size from 1 to 17 stages VM(.) 20 >> Size from 1 to 16 stages VM(.) 32 >> Size from 1 to 14 stages VM(.) 45 >> Size from 1 to 13 stages VM(.) 64 >> Size from 1 to 8 stages VM(.) 90 >> Size from 1 to 6 stages ( ) = VM >> AISI304 Components (L) = VM >> AISI316L Components (K*) = VM>> AISI304 + PRESSURE SENSOR (LK*) = VM >> AISI316L + PRESSURE SENSOR *K1 = DANFOSS MBS1900 *K2 = DANFOSS DST P 140 *K3 =SCHNEIDER XMLP0xxBD21F VM(.) 1-3 >> Available with Oval flange G1, Round Flange DN25, Loose round flange DN25, Victaulic DN32 and Clamp Ø59 VM(.) 5 >> Available with Oval flange G1¼, Round Flange DN32, Loose round flange DN32, Victaulic DN32 and Clamp Ø59. VM(.) 10 >> Available with Oval flange G1½, Round Flange DN40, Loose round flange DN40, Victaulic DN50 and Clamp Ø87. VM(.) 15-20 >> Available with Oval flange G2, Round Flange DN50, Loose round flange DN50, Victaulic DN50 and Clamp Ø87. VM(.) 32 >> Available with Loose round flange DN65. VM(.) 45 >> Available with Loose round flange DN80. VM(.) 64-90 >> Available with Loose round flange DN100. Model Bar VM( )1 2 16 VM( )1 3 16 VM( )1 4 16 VM( )1 5 16 VM( )1 6 16 VM( )1 7 16 VM( )1 8 16 VM( )1 9 16 VM( )1 10 16 VM( )1 11 16 VM( )1 12 16 VM()1 13 16 VM(L)1 14 16 VM( )1 16 16 VM( )1 18 16 VM( )1 20 16 VM( )1 22 16 VM( )1 24 16 VM( )1 26 16 VM( )1 27 25 VM( )1 29 25 VM( )1 32 25 VM( )1 34 25 VM( )1( 37 25 VM( )1 39 25 VM( )3 2 16 VM( )3 3 16 VM( )3 4 16 VM( )3 5 16 VM( )3 6 16 VM( )3 7 16 VM( )3 8 16 VM( )3 9 16 VM( )3 10 16 VM( )3 11 16 VM( )3 12 16 VM( )3 13 16 VM( )3 14 16 VM( )3 15 16 VM( )3 16 16 VM( )3 17 16 VM( )3 19 16 VM( )3 21 16 VM( )3 23 25 VM( )3 25 25 VM( )3 27 25 VM( )3 29 25 VM( )3 31 25 VM( )3 33 25 VM( )5 2 16 VM( )5 3 16 VM( )5 4 16 VM( )5 5 16 VM( )5 6 16 VM( )5 7 16 VM( )5 8 16 VM( )5 9 16 VM( )5 10 16 VM( )5 11 16 VM( )5 12 16 VM( )5 13 16 VM( )5 14 16 VM( )5 15 16 VM( )5 17 16 VM( )5 19 25 VM( )5 20 25 VM( )5 23 25 VM( )5 25 25 VM( )5 27 25 VM( )10 2 16 VM( )10 3 16 VM( )10 4 16 VM( )10 5 16 VM( )10 6 16 VM( )10 7 16 VM( )10 8 16 VM( )10 9 16 VM( )10 10 16 VM( )10 11 16 VM( )10 12 16 VM( )10 14 16 VM( )10 15 16 VM( )10 16 25 VM( )10 18 25 VM( )10 19 25 VM( )10 21 25 VM(L)10 22 25 VM( )10 23 25 VM( )15 1 16 VM( )15 2 16 VM( )15 3 16 VM( )15 4 16 VM( )15 5 16 VM( )15 6 16 VM( )15 7 16 VM( )15 8 16 VM( )15 9 16 VM( )15 10 16 VM( )15 11 16 VM( )15 12 25 VM( )15 13 25 VM( )15 15 25 VM( )15 17 25 VM()20 1 16 VM( L)20 2 16 VM( )20 3 16 VM( )20 4 16 VM( )20 5 16 VM( )20 6 16 VM( )20 7 16 VM( )20 8 16 VM( )20 9 16 VM( )20 10 25 VM( )20 11 25 VM( )20 12 25 VM( )20 13 25 VM( )20 14 25 VM( )20 15 25 VM( )20 16 25 VM( )32 1-1 16EVMS( )32 1-0 16 VM( )32 2-2 16 VM( )32 2-0 16 VM( )32 3-2 16 VM( )32 3-0 16 VM( )32 4-2 16 VM( )32 4-0 16 VM( )32 5-2 16 VM( )32 5-0 16 VM( )32 6-2 16 VM( )32 6-0 16 VM( )32 7-2 16 VM( )32 7-0 16 VM( )32 8-2 25 VM( )32 8-0 25 VM( )32 9-2 25 VM( )32 9-1 25 VM( )32 10-2 25 VM( )32 10-0 25 VM( )32 11-2 25 VM( )32 11-1 25 VM(L)32 12-2 30 VM(L)32 12-0 30 VM( )32 13-2 30 VM( )32 13-0 30 VM( )32 14-2 30 VM( )32 14-0 30 VM( )45 1-1 16 VM( )45 1-0 16 VM( )45 2-2 16 VM( )45 2-0 16 VM( )45 3-2 16 VM( )45 3-0 16 VM( )45 4-2 16 VM( )45 4-0 16 VM( )45 5-2 16 VM( )45 5-0 16 VM( )45 6-2 25 VM( )45 6-0 25 VM( )45 7-2 25 VM( )45 7-0 25 VM( )45 8-2 25 VM( )45 8-0 25 VM( )45 9-2 25 VM( )45 9-0 25 VM( )45 10-2 35 VM( )45 10-0 35 VM( )45 11-2 35 VM( )45 11-0 35 VM( )45 12-2 35 VM( )45 12-0 35 VM( )45 13-2 35 VM( )64 1-1 16 VM( )64 1-0 16 VM( )64 2-2 16 VM( )64 2-1 16 VM( )64 2-0 16 VM( )64 3-2 16 VM( )64 3-1 16 VM( )64 3-0 16 VM( )64 4-2 16 VM( )64 4-1 16 VM( )64 4-0 16 VM( )64 5-2 16 VM( )64 5-1 16 VM( )64 5-0 16 VM( )64 6-2 25 VM( )64 6-1 25 VM( )64 6-0 25 VM( )64 7-2 25 VM( )64 7-1 25 VM( )64 7-0 25 VM( )64 8-2 25 VM( )64 8-1 25 VM( )90 1-1 16 VM( )90 1-0 16 VM( )90 2-2 16 VM(L)90 2-0 16 VM(L)90 3-2 16 VM(L)90 3-0 16 VM(L)90 4-2 16 VM( )90 4-0 16 VM( )90 5-2 25 VM( )90 5-0 25 VM( )90 6-2 25 VM( )90 6-0 25

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of shower handsets (chrome plated brass), shower hoses, handset brackets and cover plates. The shower handset inlets incorporate stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2209005

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

Dornbracht on shower handset.

Installation Requirements:

R001 R040

Expiry date:

30/09/2027

Model:

27702710 27702979 27702980 27702660 27702809 27708780 27802845 27806625 27808710 27808980 27818980

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of shower handsets with brass bodies, available with various finishes. The inlet incorporates a plastic regulator and incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 80°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2209011

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

SHS on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2027

Model:

F754W-K-XX V754W-F-XX “XX” - denotes choice of finish available: CP Chrome Plate, PN Polished Nickel, SSF Stainless Steel Finish, NL Non-Lacquered, BG Brushed Gold, BGG Brushed Gold Gloss lacquered, BGM Brushed Gold Matt Lacquered, CTB City Bronze, CNB Country Bronze, AG Antique Gold, MOP Matt Finish, MBC Matt Black Chrome, SSB Stainless steel finish, URB Urban Brass & URM Urban Brass Matt

Product Images

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of shower handsets with plastic bodies (chrome plated or white finish). Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2209015

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Aqualisa on handset

Installation Requirements:

R001 R040

Expiry date:

30/09/2027

Model:

628001 628101 628002 628201 628301 628401

Product Images

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company