Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106009

Size:

12mm - 108mm.

Marking:

Taizhou Double Winner logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

6270 & 6270CP Copper Press Coupling: 12 - 108mm. 6271 & 6271CP Copper Press Coupling: 12 - 54mm. 6240 & 6240CP Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 & 6243CP Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001& 6001CP Bend 90° x press: 12-108mm. 6002 & 6002CP Bend 90° press x press: 12 - 108mm. 6130 & 6130CP Equal Tee 3 x press: 12 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. 6041& 6041CP Bend 45° press x press: 12 - 108mm. 6301 & 6301CP Endcap press: 12 - 108mm. 6131 & 6131CP Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101807

Size:

SEE MODEL

Marking:

Hastings Copper Industries (Brand of Metalica SA) double triangle logo & size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Hastings Copper Socket: (HEFC-15, 15mm; HEFC-L-15, 15mm; HEFC-22, 22mm; HEFC-L-22, 22mm; HEFC-L-28 28mm; HEFC-28, 28mm; HEFC-35, 35mm; HEFC-42,42mm; HEFC-54, 54mm;) Hastings Copper Bend 90o MF: HEFESL-12:12mm. HEFESL-15:15mm. HEFESL-18:18mm. HEFESL-22:22mm. HEFESL-28:28mm. HEFESL-35:35mm. HEFESL-42:42mm. HEFESL-54:54mm Hastings Copper Elbow FF: HEFE-15, 15mm; HEFE-L-15, 15mm; HEFE-22, 22mm;HEFE-L-22, 22mm; HEFE-28, 28mm; HEFE-L-28, 28mm;HEFE-35,35mm;HEFE-42, 42mm; HEFE-54,54mm; Hastings Copper 45° Elbow FF:HEFE/45-15, 15mm; HEFE/45-22,22mm; HEFE/45-28, 28mm;HEFE/45-35, 35mm; HEFE/45-42, 42mm; HEFE/45-54, 54mm; Hastings Copper 90 Elbow MF:HEFES-15, 15mm;HEFES-L-15, 15mm;HEFES-22, 22mm;HEFES-L-22, 22mm;HEFES-28, 28mm; HEFES-L-28, 28mm;HEFES-35, 35mm; HEFES-42, 42mm; HEFES-54,54mm; Hastings Copper 45° Elbow MF:HEFES/45-15, 15mm; HEFES/45-22,22mm; HEFES/45-28, 28mm;HEFES/45-35, 35mm; HEFES/45-42, 42mm;HEFES/45-54, 54mm) Hastings Copper Tee:HEFET-15, 15mm; HEFET-L-15, 15mm; HEFET-22,22mm; HEFET-L-22, 22mm;HEFET-28, 28mm; HEFET-L-28, 28mm; HEFET-35,35mm; HEFET-42, 42mm; HEFET-54, 54mm; Hastings Copper Reducing Tee;HEFRT-151015;15x10x15mm; HEFRT-151508, 15x15x8mm; HEFRT-151510,15x15x10mm; HEFRT-151512, 15x15x12mm; HEFRT-151522, 15x15x22mm; HEFRT-221515, 22x15x15mm;HEFRT-221522, 22x15x22mm; HEFRT-L-221522, 22x15x22mm; HEFRT-222210, 22x22x10mm; HEFRT-222215, 22x22x15mm; HEFRT-L-222215,22x22x15mm; HEFRT-222228, 22x22x28mm; HEFRT-281515, 28x15x15mm;HEFRT-281522, 28x15x22mm; HEFRT-281528, 28x15x28mm; HEFRT-282215,28x22x15mm; HEFRT-282222, 28x22x22mm; HEFRT-282228, 28x22x28mm;HEFRT-282815, 28x28x15mm; HEFRT-282822, 28x28x22mm; HEFRT-282835,28x28x35mm; HEFRT-352222, 35x22x22mm; HEFRT-352235, 35x22x35mm;HEFRT-352822, 35x28x22mm; HEFRT-352828,35x28x28mm; HEFRT-352835,35x28x35mm; HEFRT-353515, 35x35x15mm; HEFRT-353522, 35x35x22mm;HEFRT-353528, 35x35x28mm; HEFRT-422828, 42x28x28mm; HEFRT-422842,42x28x42mm; HEFRT-423535, 42x35x35mm; HEFRT-423542, 42x35x42mm;HEFRT-424215, 42x42x15mm; HEFRT-424222, 42x42x22mm; HEFRT-424228,42x42x28mm; HEFRT-424235, 42x42x35mm; HEFRT-544254, 54x42x54mm;HEFRT-545415, 54x54x15mm; HEFRT-545422, 54x54x22mm; HEFRT-545428,54x54x28mm; HEFRT-545435, 54x54x35mm; HEFRT-545442, 54x54x42mm; Hastings Copper Plug:HEFEC-15, 15mm; HEFEC-L-15, 15mm; HEFEC-22,22mm; HEFEC-L-22, 22mm; HEFEC-28, 28mm; HEFEC-35, 35mm; HEFEC-42,42mm;HEFEC-54, 54mm; Hastings Copper Reducer CXFTG:HEFFR-1510, 15x10mm;HEFFR-L-1510, 15x10mm;HEFFR-1512, 15x12mm; HEFFR-2215, 22x15mm; HEFFR-L-2215, 22x15mm;HEFFR-2815,28x15mm; HEFFR-2822,28x22mm; HEFFR-L-2822, 28x22mm; HEFFR-3515,35x15mm; HEFFR-3522, 35x22mm; HEFFR-3528,,35x28mm; HEFFR-4215,42x15mm; HEFFR-4222, 42x22mm; HEFFR-4228, 42x28mm; HEFFR-4235,42x35mm; HEFFR-5415, 54x15mm; HEFFR-5422, 54x22mm;HEFFR-5428,54x28mm; HEFFR-5435,,54x35mm; HEFFR-5442, 54x42mm; Hastings Copper Bend 90o MF: HEFE-L-12:12mm.HEFE-L-15:15mm.HEFE-L-18:18mm.HEFE-L-22:22mm.HEFE-L-28:28mm.HEFE-L-35:35mm.HEFE-L-42:42mm.HEFE-L-54:54mm.

Product Images

Approval Holder:

Metalica SA

Company Name

Metalica SA

View All Listings by this Company

Range of outdoor air to water heat exchanger units incorporating a pump, drain valve and isolation valve. Maximum working pressure 5.0 bar. Maximum operating temperature 90°C

Section:

1350 Heat Exchangers

Size:

¾” BSP (F)

Marking:

Mitsubishi Heavy Industries and technical information on data plate on body.

Installation Requirements:

R001 R430 R510

Expiry date:

30/09/2026

Model:

ESA30E-25 & ESA30EH-25. Model added June 2023: ESA30EH2-25.

Product Images

Approval Holder:

MITSUBISHI HEAVY INDUSTRIES THERMAL SYSTEMS, LTD

Company Name

MITSUBISHI HEAVY INDUSTRIES THERMAL SYSTEMS, LTD

Address

2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo, 100- 8332

Country

Japan

View All Listings by this Company

Manufacturer:

MITSUBISHI HEAVY INDUSTRIES THERMAL SYSTEMS, LTD

Company Name

MITSUBISHI HEAVY INDUSTRIES THERMAL SYSTEMS, LTD

Address

2-3, Marunouchi 3-chome, Chiyoda-ku, Tokyo, 100- 8332

Country

Japan

View All Listings by this Company

Range of water meters with black epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

see model

Marking:

GWF, date of manufacture (YYYY) and other technical information on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

Sonico EDGE DN200 – 350mm length. Sonico EDGE DN200 – 520mm length Sonico EGDE DN250 – 450mm length Sonico EDGE DN300 – 500mm length

Product Images

Approval Holder:

GWF AG

Company Name

GWF AG

Address

Obergrundstrasse 119 Lucerne

Postcode

6005

Country

Switzerland

Phone

+41 41 319 51 77

General Email

moritz.roettger@gwf.ch

View All Listings by this Company

Range of hand wash and dryer units The flow is controlled by a solenoid valve activated via an infra-red sensor. The products are supplied with a non-verifiable double check valve assembly (suitable for backflow protection against Fluid category 3) for installation on the inlet. The double check valve assembly also incorporates a drain port, (located in between the cartridges), and an integral spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 50ºC.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2107098

Note:

R008 applies to the solenoid valves and stainless steel braided PEX lined flexible hose assemblies.

Size:

15mm compression

Marking:

Wallgate on face cover. Wallgate, model, serial number, date of manufacture (DD/MM/YY) and other product info on label on control panel.

Installation Requirements:

R001 R008 R040 R570

Expiry date:

31/07/2026

Model:

Thrii-SS (Solid Surface fascia), Thrii-DIS-SS (Disabled design, Solid Surface fascia), Thrii-ST (Stainless Steel fascia), Thrii-CW-SS (Cold water only, Solid Surface fascia - instantaneous water heater removed), Thrii-CW-ST (Cold water only, Stainless Steel fascia - instantaneous water heater removed), Thrii-DIS-CW-SS (Disabled design, Cold water only, Solid Surface fascia - instantaneous water heater removed), Thrii-ST-RA (Stainless Steel fascia – Rear Access), Thrii-SS-RA (Solid Surface fascia – Rear Access), Thrii-Marine.

Product Images

Approval Holder:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Manufacturer:

Wallgate Ltd.

Company Name

Wallgate Ltd.

Address

Crow Lane Salisbury

Postcode

SP2 0HB

Country

United Kingdom

Phone

01722 702058

General Email

jmarshall@wallgate.com

View All Listings by this Company

Pressure gauge with a plastic case, brass connector and bronze spring tube. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Size:

⅜” BSP (M)

Marking:

Pegler (Brand of Aalberts integrated piping systems Ltd.) on gauge face.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

Pegler Prestex pressure Gauge (5A2003)

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of flow and temperature sensors with stainless steel bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Section:

1530 Miscellaneous Fittings

Marking:

Droople & flow arrow on body

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

SAR-FT-BSP-MM12, SAR-FT-BSP-MM34 & SAR-FT-BSP-MM1.

Product Images

Approval Holder:

Droople SA

Company Name

Droople SA

Address

Route du Verney 18, 1070 Puidoux

Country

Switzerland

View All Listings by this Company

Range of circulation fittings with gun metal bodies, plastic cones & guides and EPDM ‘O’ rings. The products incorporate a dynamic venturi valve. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Size:

see model

Marking:

Kemper’s logo, flow arrow, DN and PN on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

6501001500 - DN15 x ½” BSP (F) 6501002000 - DN20 x ¾” BSP (F) 6501002500 - DN25 x 1” BSP (F) 6501003200 - DN32 x 1 ¼” BSP (F) 6501004000 - DN40 x 1 ½” BSP (F) 6501005000 - DN50 x 2” BSP (F) 6502001500 - DN15 x ½” BSP (F) 6502002000 - DN20 x ¾” BSP (F) 6502002500 - DN25 x 1” BSP (F) 6502003200 - DN32 x 1 ¼” BSP (F) 6502004000 - DN40 x 1 ½” BSP (F) 6502005000 - DN50 x 2” BSP (F) 6501201500 - DN15 x ¾” BSP (M) 6501202000 - DN20 x 1” BSP (M) 6501202500 - DN25 x 1 ¼” BSP (M) 6501203200 - DN32 x 1 ½” BSP (M) 6501204000 - DN40 x 1 ¾” BSP (M) 6501205000 - DN50 x 2 3/8” BSP (M)

Product Images

Approval Holder:

Gebr. Kemper GmbH + Co. KG

Company Name

Gebr. Kemper GmbH + Co. KG

Address

Harkortstr. 5 57462 Olpe Germany

Phone

+49(0) 27618910

General Email

info@kemper-olpe.de

View All Listings by this Company

Pressure manager pump control unit with a plastic body. The outlet incorporates a non-return valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

1” BSP (M) inlet/outlet.

Marking:

Grundfos, Grundfos logo and model on top of body. Grundfos and Grundfos logo, type, model, WRAS Approved Product logo 23°C, technical info and manufacturing country on adhesive label on side of body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

PM1, PM2 & PM TWIN.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Copper corrugated hose. Maximum working pressure 10.0 bar. Maximum working temperature 90°C.

Section:

1530 Miscellaneous Fittings

Size:

See model.

Marking:

Flomasta, WRAS and year of manufacture (YYYY) on body. Models Added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

COPPER CORRUGATED HOSES: 03890158 15MM TUBE X ½” CAPTIVE NUT, 03890165: 15MM TUBE X 15MM TUBE. Models Added December 2023 3342978024433 15mm tube x ½” captive nut. 5059340261133 15mm tube x 15mm tube.

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company