Range of three hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated) incorporating quarter ceramic disc headworks and various operating members (see model). The spout outlet incorporates a plastic aerator. The product is supplied a click type waste and stainless steel braided EPDM lined flexible hose assemblies for connecting the side body headworks and the spout junction. Maximum working pressure 5.5 bar. Maximum working temperature 60 °C.

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2111015

Size:

12mm compression

Marking:

Waterworks logo (W) on spout.

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2026

Model:

Henry Low Profile Three Hole Deck Mounted HNLS01 - metal Cross Handles HNLS02 - Teak Cylinders and Metal Cross Handles HNLS03 - Portoro Cylinders and Metal Cross Handles HNLS04 - Coin Edge Cylinders and Metal Cross Handles HNLS10 - Metal Lever Handles HNLS11 - Teak Cylinders and Metal Lever Handles HNLS12 - Portoro Cylinders and Metal Lever Handles HNLS13 - Coin Edge Cylinders and Metal Lever Handles Henry Gooseneck Three Hole Deck Mounted HNLS20 - Metal Cross Handles HNLS21 - Teak Cylinders and Metal Cross Handles HNLS22 - Portoro Cylinders and Metal Cross Handles HNLS23 - Coin Edge Cylinders and Metal Cross Handles HNLS30 - Metal Lever Handles HNLS31 - Teak Cylinders and Metal Lever Handles HNLS32 - Portoro Cylinders and Metal Lever Handles HNLS33 - Coin Edge Cylinders and Metal Lever Handles R.W. Atlas Low Profile Three Hole Deck Mounted RWLS20 - Metal Wheel Handles RWLS30 - Metal Lever Handles

Product Images

Approval Holder:

Waterworks

Company Name

Waterworks

Address

60 Backus Ave, Danbury, CT 06810

Country

USA

Phone

(203) 546 6140

View All Listings by this Company

Range of basin spout outlets with brass bodies (various finishes), the outlet incorporates either a metal aerators, plastic aerators or open outlet (depending on model). Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2201309

Size:

¾” BSP (M)

Marking:

THG on body.

Installation Requirements:

R010 R040

Expiry date:

31/01/2027

Model:

xxx.xxx.22G/W wall mounted goliath spout xxx.xxx.22SG/W wall mounted super goliath spout First xxx = style Second xxx = finish Style xxx.xxx.22SG/W Broadway A04 Broadway à manettes - A52 Broadway LE 11 BY ALBERTO PINO U2A le 11 by alberto pinto - U2B le 11 by alberto pinto a manettes POMME A42 pomme cristal clair satine - A46 pomme cristal lustre or - U2D infini porcelaine blanche - U2E infini porcelaine blanche décor platine - U2F infini porcelaine blanche décor or ART DECO A54 Art Déco - A55 Art Déco à manettes - A56 Art Déco Cristal - A57 Tradition - A58 Tradition à manettes - A59 Tradition Cristal BELUGA G1T BELUGA - G1U BELUGA A MANETTES BEYOND U6F Beyond Crystal cristal clair - U6G Beyond Crystal cristal aqua - U6H Beyond Crystal cristal rouge - U6J Beyond Crystal cristal couleur champagne - U6K Beyond Crystal - cristal bleu CHARLESTON G29 Charleston - G3N Charleston à manettes métal lisse - G75 Charleston à manettes FAUBOURG A2I Perle - A7D Capucine mauve décor Or -A7E Capucine vert décor Platine - G2H Le 9 howlite - G2I Le 9 Nero Marquina - G2J Faubourg porcelaine blanche à manettes - G2K Faubourg porcelaine blanche - G2L Faubourg porcelaine noire - G2M Faubourg porcelaine noire à manettes - G2N Froufrou - G2P Froufrou à manettes - G2R Frivole - G2S Frivole à manettes - G2T Faubourg métal - G2U Faubourg métal à manettes - G58 Spirit à manettes - G69 Spirit METAMORPHOSE G6A Métamorphose - G6B Métamorphose à manettes - G6C Métamorphose carbone - G6D Métamorphose céramique noire - G6E Métamorphose céramique blanche -G6F Métamorphose à manettes coloris spécifique MOSSI A2N Mossi cristal clair - A9B Jaipur cristal satiné - U4E Duomo - U6D Pétale de Cristal noir - A41 Dahlia - A9C Jaipur Onyx noir - U4F Duomo cristal - U6E Pétale de Cristal clair liseré doré -A7A Ithaque décor Or - A9D Jaipur Quartz rose - U5A Flore - U7A Trocadéro Malachite - A7B Ithaque décor Platine - A9F Jaipur métal - U5B Island - U7B Trocadéro Lapis Lazuli - A7F Marquise noir décor Or - E53 Najem - U5C Paradise - U7C Trocadéro Jaspe Rouge - A7G Marquise blanc décor Platine - U1A Mandarine métal -U5D Sun Dragon - U7D Trocadéro Onyx noir A8B Vogue Améthyste - U1D Mandarine cristal clair -U5G Moon Dragon -U7E Trocadéro Oeil de Tigre - A8M Vogue Malachite - U1E Mandarine cristal clair satiné - U5H Jade Dragon - U8A Wedding - A8N Vogue Jaspe rouge - U1K Mandarine Cristallia Diamant - U5J Rose - A8P Vogue Onyx noir - U4A Diplomate bagues lisses - U6A Pétale de Cristal clair - A8R Vogue Oeil de tigre - U4B Diplomate bagues annelées - U6B Pétale de Cristal bleu - A8S Vogue Lapis Lazuli - U4C Diplomate bagues torsadées - U6C Pétale de Cristal rouge PRESTIGE A1J Amboise Malachite - A2G Ange - A1K Amboise Lapis Lazuli - A2H Panthère cristal clair - A1L Amboise Jaspe rouge - A2J Papillon - A1M Amboise Onyx noir - A2K Panthère cristal noir - A1S Cheverny Malachite - A3T Amboise Marbre à définir - A1T Cheverny Lapis Lazuli - A3V Cheverny Marbre à définir - A1U Cheverny Jaspe rouge - A3Y Sully Marbre à définir - A1V Sully Malachite - U1S Sully Onyx blanc - A1W Sully Lapis Lazuli - U1T Sully Onyx noir - A1X Sully Jaspe rouge - U1V Cheverny Onyx noir - A2C Océania - A2E Venice - A2F Naïade PROFIL A6A Profil métal - A6B Profil métal à manettes - A6G Profil Lalique cristal clair - A6H Profil Lalique cristal clair à manettes - A6J Profil Couleur à définir - A6K Profil à manettes - Couleur à définir - A6L Profil Lalique cristal noir - A6N Profil Onyx noir - A6P Profil Onyx noir à manettes PURE A2R Masque de Femme Lunaire - A2S Masque de Femme Solaire - A2T Masque de Femme, métal gravé - A2U Masque de Femme, métal lisse - G04 Pure - U5E Ginkgo - U5F Vegetal SHAO A33 Bambou cristal noir - A34 Bambou cristal Ambre - A35 Bambou cristal clair xxx.xxx.22G/W BEAUBOURG – ST GERMAIN G7C Saint Germain-G7D Saint Germain à manettes-G7ABeaubourg-G7B Beaubourg à manettes MALMAISON U8B Monte Carlo porcelaine or - U8C Monte Carlo porcelaine or blanc - U93 Malmaison métal - U94 Malmaison cristal - U95 Malmaison Portoro - U97 Malmaison Howlite NANO G5A Nano - G5B Nano à manettes - G5D Anoa corne noire PULLMAN A2A Métropolis cristal clair - A2B Métropolis cristal clair à manettes - A2L Métropolis cristal noir - A2M Métropolis cristal noir à manettes - G79 Cubica - J17 Beverley VENDOME G47 Vendôme ROCHAMBEAU G13 Rochambeau - G14 Versailles BAGATELLE U3A Bagatelle métal - U3B Bagatelle métal à manettes - U3E Bagatelle pierre noire - U3F Bagatelle pierre noire à manettes Finishing A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Expansion vessels incorporating a stainless steel body and EPDM membrane. Maximum working pressure 10.0 bar. Maximum operating temperature 100˚C.

Section:

1000 Expansion Vessels

Size:

½” BSP (M)

Marking:

Aquasystem, model, serial No, date of manufacture (DD/MM/YYY) & other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

XVES050005: 0.50L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050006: 1L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP XVES050007: 2L SHOCK ARRESTOR PRE‐SET 3.5BAR 1/2"MBSP

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

General Email

info@zilioindustries.com

View All Listings by this Company

Range of expansion vessels with EPDM membrane and stainless steel flange connections. Maximum working pressure of 10.0 bar. Maximum operating temperature 100°C.

Section:

1000 Expansion Vessels

WRAS Approval Number:

2110388

Note:

Expansion vessels should be installed in the vertical orientation and located so that the length of the connecting pipework is kept to a minimum

Size:

½” BSP (M), ¾” BSP (M) & 1” BSP (M)

Marking:

Aquasystem & technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

XVES050020, 5L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050030, 8L VERTICAL POT VESSEL WHITE PRE-SET 3.0 XVES050031, 8L VERT POT VESSEL WHITE 3.5B XVES050036, 8L POT VESSEL INTER BRACKET PRE-SET 3.5 XVES050040, 12L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050041, 12L VERT POT VESSEL WHITE 3.5B XVES050042, 12L VERT POT VESSEL WHITE 2.2B XVES050045, 12L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050046, 12L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050047, 12L POTABLE VESSEL 4BAR W/ INT BRACKET XVES050050, 18L VERT POT VESSEL WHITE PRE-SET 3.0 XVES050051, 18L VERT POT VESSEL WHITE 3.5B XVES050052, 18L VERT POT VESSEL WHITE 2.2B XVES050055, 18L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050056, 18L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050057, 18L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050060, 24L VER POT VESSEL WHITE PRE-SET 3.0 XVES050061, 24L VERT POT VESSEL WHITE 3.5B XVES050062, 24L VERT POT VESSEL WHITE 2.2B XVES050065, 24L POT VESSEL 3.0BAR C/W BRKT VERTICAL XVES050066, 24L POT VESSEL 3.5BAR C/W BRKT VERTICAL XVES050067, 24L POTABLE VESSEL 4.0BAR W/ BRACKET XVES050075, 35L VERT POT VES WHITE PRE 3BAR C/W BRK XVES050080, 50L VERTICAL POT VESSEL BLUE PRE-SET 3.0

Manufacturer:

Zilio Industries SPA

Company Name

Zilio Industries SPA

Address

Via Sega Vecchia, 65 Località Friola 36050 Pozzoleone (Vicenza)

Country

Italy

Phone

[+39] 049 59 57 552

View All Listings by this Company

‘Unidelta Deltapress’ range of brass press-fit fittings for use with ‘Unidelta Flexall’ PE-RT/AL/PE-RT pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1105 Multi-Layered Pipe Systems

Section Subtitle:

Compatible fittings and pipe systems for use with hot and cold water. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201026

Marking:

Unidelta logo and size on crimping sleeve of fitting. Unidelta FLEXALL, size and technical information on pipe.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

‘Unidelta Deltapress’ fittings for use with ‘Unidelta Flexall’ PE-RT/AL/PE-RT pipe. Fitting crimp profiles: TH, H & U: • Cod.4001 (Coupling): 16x16mm, 18x18mm, 20x20mm, 26x26mm, 32x32mm. • Cod.4002 (Reducing coupling): 18x16mm, 20x16mm, 20x18mm, 26x16mm, 26x20mm, 32x20mm, 32x26mm. • Cod.4003 (BSP Male adaptor): 16mmx3/8”, 16mmx1/2”, 18mmx1/2”, 18mmx3/4”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 26mmx1”, 32mm x1". • Cod.4004 (BSP Female adaptor): 16mmx1/2”, 18mmx1/2”, 18mmx3/4”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 26mmx1”, 32mmx1”. • Cod.4005 (90° Tee): 16x16mm, 18x18mm, 20x20mm, 26x26mm, 32x32mm. • Cod.4006 (90° Elbow): 16x16mm, 18x18mm, 20x20mm, 26x26mm, 32x32mm. • Cod.4007 (90° Tee with threaded BSP Female take off): 16mmx1/2”x16mm, 18mmx1/2”x18mm, 20mmx1/2”x20mm, 20mmx3/4”x20mm, 26mmx3/4”x26mm, 32mmx1”x32mm. • Cod.4008 (90° Elbow with threaded BSP Male take off): 16mm x1/2”, 18mmx1/2”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 32mmx1”. • Cod.4009 (90° Elbow with threaded BSP Female take off): 16mm x1/2”, 18mmx1/2”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 32mmx1”. • Cod.4010 (90° Tee with threaded BSP Male take off): 16mmx1/2”x16mm, 20mmx1/2”x20mm, 20mmx3/4”x20mm, 26mmx3/4”x26mm. • Cod.4011 (45° Elbow): 26x26mm, 32x32mm. • Cod.4013 (90° Reducing tee): 18x16x18mm, 20x16x16mm, 20x16x20mm, 20x18x20mm, 20x20x16mm, 26x16x20mm, 26x16x26mm, 26x20x20mm, 26x20x26mm, 26x26x16mm, 26x26x20mm, 32x20x32mm, 32x26x26mm, 32x26x32mm. • Cod.4029 (90° Tee with increased take off): 16x20x16mm, 20x26x20mm. • Cod.4034 (Wall plate elbow fitting): 16mmx1/2” short version, 16mmx1/2” long version, 18mmx1/2”, 20mmx1/2” short version, 20mmx1/2” long version, 20mmx3/4”. • Cod.4035 (Double wall plate elbow fitting): 16mmx1/2”, 20mmx1/2”.

Product Images

Approval Holder:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Manufacturer:

Unidelta SpA

Company Name

Unidelta SpA

Address

Via Capparola Sotto 4, 25078 Vestone (Brescia)

Country

Italy

View All Listings by this Company

Range of brass tee fittings for use with copper pipe to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112337

Size:

See model

Marking:

Aquamatic Products Limited logo (APL) on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

B840-1 - 15mm compression x 15mm spigot x 15mm spigot. B841-1 - 22mm compression x 22mm spigot x 22mm spigot.

Product Images

Approval Holder:

Aquamatic Products Limited

Company Name

Aquamatic Products Limited

Address

Hydestile Stud Hambeldon Road Godalming Surrey

Postcode

GU8 4DE

Country

United Kingdom

Phone

01483 861559

General Email

steve@aquamatic.co.uk

View All Listings by this Company

‘HE-705X & HE-715X’ ranges of brass crimp fit fittings incorporating EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057-2006). HE-7052/7053/7058/7059 & HE-7152/7153/7158/7159 models also incorporate a NBR gasket. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2109058

Size:

See model

Marking:

HONGEN, WRAS and size on crimp connection.

Installation Requirements:

R001

Expiry date:

30/09/2026

Model:

M-type connection: HE-7050 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7051 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7052 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7053 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7054 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7055 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7056 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7057 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7058 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7059 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”. V-type connection: HE-7150 - straight connector - pressfit x BSP (M): 15-54mm x ½”-2”. HE-7151 - straight connector - pressfit x BSP (F): 15-54mm x ½”-2”. HE-7152 - straight connector (with central captive nut and washer) - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7153 - straight connector (with central captive nut and washer) - pressfit x pressfit: 15x15-28x28mm. HE-7154 - 90° elbow - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7155 - 90° elbow - pressfit x BSP (F): 15-28mm x ½”-1”. HE-7156 - 90° wall plate elbow - pressfit x BSP (F): 15-22mm x ½”-¾”. HE-7157 - tee - pressfit x BSP (F) x pressfit: 15-54mm x ½” & 22-28 x ¾”. HE-7158 - straight connector (with central captive nut and washer) - pressfit x BSP (M): 15-28mm x ½”-1”. HE-7159 - straight connector - pressfit x captive nut and washer: 15-28mm x ¾”-1¼”.

Product Images

Approval Holder:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

Manufacturer:

YUHUAN HONGEN VALVE CO., LTD

Company Name

YUHUAN HONGEN VALVE CO., LTD

Address

Sanliancun, 317605, Yuhuan, Zhejiang, China

View All Listings by this Company

VSH XPRESS Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106049

Size:

12mm - 108mm.

Marking:

DVGW, XPRESS & SIZE ON BODY

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

7001 22, 7002 22, 7001 15, 7002 15, 7040 22, 7130 15 & 7130 22 PRESS FITTINGS 6270 Copper Press Coupling: 12 - 108mm. 6271 Copper Press Coupling: 12 - 54mm. 6240 Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001 Bend 90° x press: 12-108mm. 6002 Bend 90° press x press: 12 - 108mm. 6130 Equal Tee 3 x press: 12 - 108mm. 6040 Bend 45° x press: 12 - 108mm. 6041 Bend 45° press x press: 12 - 108mm. 6301 Endcap press: 12 - 108mm. 6131 Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 Flange PN16: 76.1mm.

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of PVC-u solvent weld and threaded union fittings incorporating an EPDM ‘O’-ring. For use with PVC-u pipe manufactured to ISO 1452 and DIN 8063. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201016

Note:

This approval does not include solvent cement.

Size:

See model.

Marking:

ERA® (registered trademark of Yonggao Co. Ltd.), size and PN on nut.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Union UU001: 20mm-110mm Male Union UU002: 20mm-63mm x ¼”-2” BSP (F)

Product Images

Approval Holder:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

ERA Piping (Zhejiang) Co.,Ltd.

Company Name

ERA Piping (Zhejiang) Co.,Ltd.

Address

No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang

Country

China

View All Listings by this Company

‘Xpress’ range of press fit fittings with copper or brass bodies and EPDM ‘O’-rings. For use with copper tube manufactured to EN1057. For above ground ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201304

Size:

see model

Marking:

Brass fittings: Xpress and size on body. Copper fittings: Xpress, size and Kitemark logo on body.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Code Sl/7270 Sl/72705 SlR/7240 56/7243 S12/7002A S12S/7001A S2/6270G S3/6243G S7/6246G S8/6280G Description Straight coupling Straight coupling slip pattern Straight reducing coupling Reducer Elbow Street elbow Straight female connector Straight male connector Female adaptor Male Adaptor Sizes 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -108mm 15mm -64mm 15mm -108mm 15mm -54mm 15mm-42mm Copper/ Copper Copper Copper Copper Copper Copper Gunmetal Gunmetal Gunmetal Gunmetal S11/6330 S13/6092G S14/6090G Union coupling Male elbow Female elbow 15mm -54mm 15mm -54mm 15mm -54mm Gunmetal Gunmetal Gunmetal S15/6472G Backplate elbow 15mm - 22mm Gunmetal SlFMF/7510 Composite female metric flange 67mm -108mm Copper SlFMM/7520 Composite female metric flange 67mm -108mm Copper S12R/7002A S15L/6472L Reducing Elbow Elbow 22mm x 15mm ½” and 3/4" Copper Gunmetal 519/7005 Bend 15mm-28mm Copper 521/7041 Obtuse Elbow 12mm-108mm Copper 5215/7040 Obtuse Street Elbow 12mm-108mm Copper 522/7086 Partial Crossover 15, 18 and 22mm Copper 5225/7087 Crossover 15, 18 and 22mm Copper 523/7085 Full Crossover 15, 18 and 22mm Copper 524/7130 Equal Tee 12mm-108mm Copper 525/7130 Tee Reducer Branch 15mm-108mm Copper 526/7130 Tee One End Reducer 15mm-35mm Copper 526/7130 Tee One End And Branch Reducer 15mm-54mm Copper 528/7130 S30/130G 560/7301 Tee Both Ends Reducer Female Branch Tee Stop End 12mm-28mm 12mm-108mm 35mm-54mm Copper Gunmetal Copper 561/7301 Stop End 12mm-108mm Copper S65F/6096G Elbow 12mm-54mm Gunmetal S68FF/6359 S69/6331G S69F/6330G Union Straight Male Union Connector Straight Female Union Connector 15mm-54mm 12mm-54mm 12mm-54mm Gunmetal Gunmetal Gunmetal

Product Images

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company