Range of pressure, flow and temperature sensors. The VFI sensors have stainless steel bodies, all other models have plastic bodied sensors. The MFS and VFS models are supplied with a plastic (composite) or stainless-steel flow pipe. The VFI models are supplied with a stainless-steel flow pipe. The products can also be supplied with a range of fittings/end connections (see model and size). Maximum working pressures: ITS, LPS, RPS, MFS (composite flow pipe) and VFS (composite flow pipe) models: 24.0 bar. CPS models (added February 2024): 24.0 bar. DPS: Models with vent hole: 16.0 bar. All other models: 24.0 bar. MFS (stainless steel flow pipe) and MFS (stainless steel flow pipe): 30.0 bar. VFI non-flanged models: 30.0 bar. VFI flanged models: 30.0 bar or as per flange PN rating 16.0 bar or 25.0 bar (whichever is lower). Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Size:

CPS/ITS/LPS/RPS: BRASS CW 617N: ¼" BSPP (M). S/S EN 14408: ½" BSPP (M) w/vent port. ½" BSPT (M). ½" BSPT (M) (short). ½" NPT (M). Plastic: ⅜" BSPP (M). DPS: BRASS CW 617N: ½" BSPT (M) w/vent hole. 15.5mm w/vent hole. S/S EN 1.4401: ½" BSPT (M) w/vent hole. ½" BSPP (M). Housing only S/S (EN 1.4408): 2x ⅛" NPT (F). End connections for housing only: AISI 316 6mm compression, 6mm and 8mm tube. MFS, VFS (COMPOSITE FLOWPIPE): FLOWPIPE ONLY: 1”, 1¼”, 1½” BSPP (M). END CONECTIONS: BRASS CW 617N: ½", ¾" BSPP (M). ¾", 1", 1¼" BSPT (M). ½", ¾", 1", 22mm, 28mm SWEAT. S/S EN 1.4401: ¾", 1", 1¼" NPT (M). 1", 1¼" BSPT (M). MFS, VFS (S/STEEL FLOWPIPE): FLOWPIPE ONLY (EN 1.4408): ¾", 1", 1¼" BSPP (M). ¾", 1", 1¼" NPSM (M). 1" FLANGE. END CONNECTIONS: BRASS CW 617N: ½", ¾", 1" BSPT (M). ¾", 1", 22mm & 28mm SWEAT. S/S EN 1.4401: ¾", 1" BSPT (M). ¾", 1" NPT (M). VFI: CAST IRON OR S/STEEL EN 1.4408 FLANGED: DN18/25/32 (1¼"). DN40/50 (2"). DN65/80/100. S/S EN 1.4401: 1”, 1¼" BSPT (M). 1, 1¼" NPT (M).

Marking:

VFI models: Grundfos and model type (VFI) on adhesive label on sensor. Grundfos on flow pipe. All other models: Grundfos on top of sensor housing. Model type (ITS/LPS/RPS/MFS/VFS) on adhesive label on sensor.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

Model: CPS, ITS, LPS or RPS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF CPS, ITS, LPS or RPS with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII CPS model added February 2024. Fortron body material added June 2024. Product: [A] Must be CPS, ITS, LPS or RPS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E or I, second and third character have no importance for drinking water* Materials: [G] Must be either -B, -S, -I, -D or -- Connection: [H] Must be either 03A, 03B, 03N, 02P, 01K, 16P, 66P or --- Packaging: [I] Of no importance for drinking water* ------ DPS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF DPS with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII EPDM O-rings and EPDM anti-sedimentation sealing cap added June 2024 Product: [A] Must be DPS Range and unit: [B] Of no importance for drinking water* Gen.: [C] All characters allowed except 4 and 5 Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E or I, the second must not be A. The third character has no importance for drinking water* character have no importance for drinking water* Materials: [G] Must be either -B, -S, S-, SS or -- Connection: [H] Must be either 06C, 06T, 08T, 01L, 24N, 63B, 64S or --- Packaging: [I] Of no importance for drinking water* ------ MFS or VFS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF MFS or VFS with or without composite flow pipe accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be MFS or VFS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be A or E, second and third character have no importance for drinking water* Materials: [G] Must be either C-, CB, CS or -- Connection: [H] Must be either 03P, 03S, 04B, 04N, 04P, 04S, 05B, 05N, 05P, 05S, 07B, 07N, 07P, 09P, 01K, 15K, 18K, 22S, 26R, 28S or --- Note: 04N, 05N and 07N only in combination with CS [G] Packaging: [I] Of no importance for drinking water* ------ MFS or VFS sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF MFS or VFS with or without stainless steel flow pipe accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be MFS or VFS Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be A or E, second and third character have no importance for drinking water* Materials: [G] Must be either QB, QS, Q- or -- Connection: [H] Must be either 03B, 04B, 04M, 04N, 04P, 04S, 05B, 05M, 05N, 05P, 05S, 07M, 07P, 01K, 01L, 102, 22S, 28S, 51G or --- Packaging: [I] Of no importance for drinking water* ------ VFI sensor alone (only for internal sale): Sensor/ AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF VFI with or without accessories (saleable): AAA/ B.B-BBB B/ C/ D/ E E.EE EE/ FFF/ GG/ HHH/ IIII Product: [A] Must be VFI Range and unit: [B] Of no importance for drinking water* Gen.: [C] Of no importance for drinking water* Output: [D] Of no importance for drinking water* Cable: [E] Of no importance for drinking water* Sealing: [F] The first character must be E, second and third character have no importance for drinking water* Materials: [G] Must be either S-, SG, SS or -- Connection: [H] Must be either --F, --P, 05B, 05N, 07B, 07N, 07P, 09P, 30F, 31F, 32F, 33F, 35F, 37F or 42F Packaging: [I] Of no importance for drinking water* ------ Where: Code for sealing [F]: 1st character: “A” means EPDM O-rings and EPDM sealing sleeve. “E” means EPDM O-rings. “I” means EPDM O-rings and EPDM anti-sedimentation sealing cap Code for material [G]: 1st character: “C” means composite flow pipe. “Q” means flow insert and (except service sets) also a stainless steel flow pipe. “S” means stainless steel adapter (for DPS) or flow pipe. “-“ means no adapter (for DPS) or flow pipe. 2nd character: "B" means brass (fitting) and from December 2025 means brass with lead content > 0.1% (fitting) “D” means Fortron (fitting) “G” means cast iron (flange). “I” means composite (fitting). “L” means brass with lead content ≤ 0.1% (fitting) (from December 2025) "S" - means stainless steel (fitting or flange). “-“ means no further accessories included. Code for connection (H): 1st two characters: “01” means 10 mm. “02” means ¼”. “03” means ½”. “04” means ¾”. “05” means 1”. “06” means 6 mm. “07” means 1¼”. “08” means 8 mm. “09” means 1½”. (Internal note - this is on a flow pipe connection) “15” means 15 mm. “16” means ⅜”. “18” means 18 mm. “22” means 22 mm. “24” means ⅛”. “26” means 42 mm. “28” means 28 mm. “30” means DIN PN25/40 DN18/25/32, ANSI B16.5 Class 300 - 1¼". “31” means DIN PN16/25/40 DN40, ANSI B16.5 Class 300 - 2". “32” means DIN PN16/25/40 DN50, ANSI B16.5 Class 300 - 2". “33” means ISO/DIN PN25/40 DN65. “35” means ISO/DIN PN25/40 DN80. “37” means ISO/DIN PN16 DN100. “42” means ISO/DIN PN25/40 DN100. “51” means 1" / ¾". “63” means ½" and ventilation opening. “64” means 15.5 mm and ventilation opening. “66” means ½” and M8 ventilation port “--” means no accessories included and thus implicitly the dimension of the sensor connection, which for DPS, ITS, LPS, MFS, RPS and VFS is 10 mm (of no importance for drinking water). For VFI this is used for service sets, which includes the sensor and the bluff body, but not the flow pipe (of no importance for drinking water). 3rd character: “A” means BSPT (short). “B” means BSPT. “C” means Compression. “F” means flange. “K” means standard clip included (of no importance for drinking water). “L” means special clip included (of no importance for drinking water). “M” means NPSM. “N” means NPT. “P” means BSPP. “R” means union not (union nut included but no fittings included). “S” means sweat. “T” means hose connector. “2” means both standard clip and special clip included (of no importance for drinking water). “-“means no accessories included and thus implicitly the connection type of the sensor, which for DPS, ITS, LPS, MFS, RPS and VFS is a clip (of no importance for drinking water). Further details on the nomenclature: * All characters are allowed NOTE - For customer-specific numbers, GG/HHH/IIII in the saleable code is replaced by the customer name. However, the customer-specific products are still covered if they meet the requirements specified in the standard sales code.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of temperature measurement devices with bronze bodies and EPDM o-rings. Maximum operating pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1530 Miscellaneous Fittings

Size:

see model;

Marking:

Kemper logo, size and flow arrow on body

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

6280G0XX00. XX stands for 15, 20, 25, 32, 40 or 50 related to the dimension of the sensor (mm).

Approval Holder:

Gebr. Kemper GmbH+Co. KG

Company Name

Gebr. Kemper GmbH+Co. KG

Address

Harkortstr. 5 Olpe

Postcode

57462

Country

Germany

Phone

+49 2761 8910

General Email

h.u.gall@gall-engineering.de

View All Listings by this Company

Manufacturer:

Gebr. Kemper GmbH+Co. KG

Company Name

Gebr. Kemper GmbH+Co. KG

Address

Harkortstr. 5 Olpe

Postcode

57462

Country

Germany

Phone

+49 2761 8910

General Email

h.u.gall@gall-engineering.de

View All Listings by this Company

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: EV30, EV45, 30VR & 45VR models - 32.0 bar, EV65, EV95, 65VR & 95VR models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305073

Size:

DN65 - DN100

Marking:

Franklin electric S.r.l logo, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

EV and VR ranges. Code example (EV range): EV 30 /13 A B C D E F G H J K L M N. Where: EV = Pump model EV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). EV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); EV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); EV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); EV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz). Code example (VR range): 30 VR0700 A B C X-XXXX. Where: 30 = Rated flow [m³/h] (varies: 30-95). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "G" - (cast iron/304SS); "N" - (AISI316/EN 1.4401). B = Flange type: "F" - round. C = Mechanical Seal: “A” - (BQBE, BE1); “B” - (BQQE, BE2). X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. 30VR: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); 45VR: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); 65VR: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A (60Hz); 95VR: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Manufacturer:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of circulator pumps with stainless steel bodies and a plastic impeller. All models are available with a plastic (composite) rotor can, the MAGNA1 range is also available with a stainless-steel rotor can in the DN32 flanged, threaded 1½ & 2” sizes only. The MAGMA3 models have a differential pressure sensor. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305910

Size:

Flanged: DN32, DN40, DN50, DN65. Threaded: 1 ½” & 2” BSP (M).

Marking:

Grundfos and Grundfos logo on motor housing. Grundfos Holdings A/S and address, type, model, Product No., Serial No., production date (YYWW), manufacturing country and other technical information on data plate on motor control box.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

MAGNA1 XX1-XX2 N XXX3, MAGNA1 XX1-XX2 F N XXX3, MAGNA3 XX1-XX2 N XXX3, MAGNA3 XX1-XX2 F N XXX3. Where: MAGNA1 = pump type (without sensor), MAGNA3 = pump type (with differential pressure sensor). XX1 = Nominal diameter (DN) of inlet/outlet ports (mm). XX2 = Max. head (dm). Blank or F = Blank - threaded, F - Flanged connection. N = Stainless steel pump housing. XXX3 = Port to port length (mm). Full model list below: MAGNA3 32-120 F N 220, MAGNA3 40-80 F N 220, MAGNA3 40-100 F N 220, MAGNA3 40-120 F N 250, MAGNA3 40-150 F N 250, MAGNA3 40-180 F N 250, MAGNA3 50-40 F N 240, MAGNA3 50-60 F N 240, MAGNA3 50-80 F N 240, MAGNA3 50-100 F N 280, MAGNA3 50-120 F N 280, MAGNA3 50-150 F N 280, MAGNA3 50-180 F N 280, MAGNA3 65-40 F N 340, MAGNA3 65-60 F N 340, MAGNA3 65-80 F N 340, MAGNA3 65-100 F N 340, MAGNA3 65-120 F N 340, MAGNA3 65-150 F N 340, MAGNA1 25-40 N 180, MAGNA1 25-60 N 180, MAGNA1 25-80 N 180, MAGNA1 25-100 N 180, MAGNA1 25-120 N 180, MAGNA1 32-40 N 180, MAGNA1 32-60 N 180, MAGNA1 32-80 N 180, MAGNA1 32-100 N 180, MAGNA1 32-40 F N 220, MAGNA1 32-60 F N 220, MAGNA1 32-80 F N 220, MAGNA1 32-100 F N 220, MAGNA1 32-120 F N 220, MAGNA1 40-40 F N 220, MAGNA1 40-60 F N 220, MAGNA1 40-80 F N 220, MAGNA1 40-100 F N 220, MAGNA1 40-120 F N 250, MAGNA1 40-150 F N 250, MAGNA1 40-180 F N 250, MAGNA1 50-40 F N 240, MAGNA1 50-60 F N 240, MAGNA1 50-80 F N 240, MAGNA1 50-100 F N 280, MAGNA1 50-120 F N 280, MAGNA1 50-150 F N 280, MAGNA1 50-180 F N 280, MAGNA1 65-40 F N 340, MAGNA1 65-60 F N 340, MAGNA1 65-80 F N 340, MAGNA1 65-100 F N 340, MAGNA1 65-120 F N 340, MAGNA1 65-150 F N 340, MAGNA3 25-40 N 180, MAGNA3 25-60 N 180, MAGNA3 25-80 N 180, MAGNA3 25-100 N 180, MAGNA3 25-120 N 180, MAGNA3 32-40 N 180, MAGNA3 32-60 N 180, MAGNA3 32-80 N 180, MAGNA3 32-100 N 180, MAGNA3 32-40 F N 220, MAGNA3 32-60 F N 220, MAGNA3 32-80 F N 220, MAGNA3 32-100 F N 220, MAGNA3 40-40 F N 220, MAGNA3 40-60 F N 220, MAGNA1 32-120 N 180, MAGNA3 32-120 N 180.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of shower outlet elbows (brass bodies - various finishes) with a shower handset holder. The product incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure - 10 Bar.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306705

Marking:

Axor on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

11 626 xxx – Axor ShowerSolutions Porter Unit SoftSquare 36 724 xxx – Axor Citterio E Porter Unit 120/120 SoftSquare Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of overhead shower outlets (brass bodies – various finishes). The inlets incorporate a plastic flow regulator. Model 26 221 xxx and 26 465 xx0 incorporates a stainless-steel strainer, all other models incorporate a plastic strainer. Maximum operating temperature 60.0°C. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306706

Size:

½” BSP (M) inlet ½” BSP (F) inlet Models 26 464 xx0 & 26 465 xx0

Marking:

Hansgrohe logo on side or face of showerhead

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

26 220 xxx – Hansgrohe Croma Overhead Shower 280 1Jet 26 221 xxx – Hansgrohe Croma Overhead Shower 280 1Jet EcoSmart 9 L/min 27 474 xxx – Hansgrohe Raindance S Overhead Shower 240 1Jet with shower arm 27 477 xxx – Hansgrohe Raindance S Overhead Shower 240 1Jet with ceiling connector MODELS ADDED NOVEMBER 2024 26 464 xx0 – Hansgrohe Croma overhead shower 220 1jet 26 465 xx0 – Hansgrohe Croma overhead shower 220 1jet EcoSmart Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower handsets with plastic bodies (various finishes). The inlets incorporate flow restrictors, model 24320xxx has a plastic strainer at the inlet, model 24321xxx has a stainless steel strainer at the inlet. Maximum operating temperature 60°C.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305026

Size:

½” BSP male

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

24 320 xxx 24 321 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = Chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower handsets with plastic bodies (various finishes) incorporating a flow regulator and stainless-steel strainer in the inlet. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305029

Size:

½” BSP (M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

26 551 XXX 28 567 XXX 28 568 XXX Where XXX denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower handsets with plastic bodies. The inlet incorporates a plastic flow regulator, and the outlet incorporates a plastic aerator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305030

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R090

Expiry date:

31/05/2028

Model:

26640540 Hansgrohe Furly Dogs Hand Shower 150 3jet Sky blue. 26640670 Hansgrohe Furly Dogs Hand Shower 150 3jet Matt Black. 26640700 Hansgrohe Furly Dogs Hand Shower 150 3jet Matt White. 26640560 Hansgrohe Furly Dogs Hand Shower 150 3jet Pink.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of multifunctional hand shower outlets with plastic bodies. The inlet is fitted with a single check valve and flow regulator, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305300

Note:

Claims of flow rate made by the manufacturer have not been verified by test.

Size:

½” BSP(M)

Marking:

Kohler logo on body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

26288W-** WAND MULTI-FUNCTION HANDSHOWER, 2.5GPM. 26288W-G-** WAND MULTI-FUNCTION HANDSHOWER, 1.75GPM. Where ** denoted finish and can be replcad by: BL- Matte black, CP – Polished chrome, BN – Vibrant brushed nickel, 2MB – Modern brass. Kohler logo on body.

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of single function handsets plastic bodies - various finishes. The inlet incorporates a single check valve and flow regulator, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305301

Size:

½” BSP (M)

Marking:

Kohler Logo on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

26286W-** Single function handshower high flow 26286W-G** Single function handshower low flow

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Overhead shower outlets, (brass bodies - various finishes). The inlet is fitted with a flow regulator. Maximum operating temperature 42°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305306

Size:

½” BSP(F)

Marking:

Kohler on shower face

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

26301W-** - OPEN RAIN RAINHEAD, 2.5GPM. 26301W-G** - OPEN RAIN RAINHEAD, 1.75GPM.

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of wall mounted outlet brackets, (brass bodies - various finishes).Open outlet use only.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305049

Size:

½” BSP (M)

Marking:

AQUALISA on faceplate on model 706436, ELISA on faceplate on all other models.

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

706352 706353 706354 706355 706436

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Manufacturer:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of overhead shower outlets (chrome plated brass bodies) incorporating NBR ‘O’ rings.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305070

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Dornbracht on back plate.

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

Wall mounted: 28649831 Dornbracht YAMOU 28649832 Dornbracht YARRE Models added June 2024 28648831 Dornbracht YAMOU 28648832 Dornbracht YARRE Ceiling mounted: 28669831 Dornbracht YAMOU 28669832 Dornbracht YARRE Models added June 2024 28668832 Dornbracht YAMOU 28668832 Dornbracht YARRE

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of shower outlets (brass or stainless-steel bodies – various finishes) incorporating EPDM O-rings. Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305034

Size:

¾” BSP (M)

Marking:

VOLA logo on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

080W-XX Brass 080W-XX Stainless-steel ‘xx’ denotes the surface finish and is replaced by: 02=grey; 04=blue; 05=orange; 06=green; 08=yellow; 09=dark grey; 12=mocha; 14=orange-red; 15=dark blue; 16=chrome; 17=black; 18=white; 19=brass(raw); 20=brushed chrome; 21=red; 25=pink; 27=dull black; 40=Stainless Steel; 60=black chrome; 61=brushed black chrome; 62=piano black; 63=copper; 64=brushed copper; 65=bright gold; 66=dark gold; 67=brushed dark gold; 68=nickel; 69=brushed nickel; 70=brushed bright gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Wall mounted shower outlet (brass body – various finishes). The product is supplied with shower hose and handset that incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2304319

Size:

½” BSP (F)

Marking:

Graff on back plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

E-8627-yy-T “T” – means that product doesn’t include CV valve. ‘yy’ at the end of model denotes finish, and can be replaced with: 1. PC polished chrome 11. BB Brushed Brass PVD 2. SN Steelnox® Satin Nickel 12. GM Gunmetal 3. BNi Brushed Nickel 13 MBK Matt Black 4. PN Polished Nickel 14 OX Onyx PVD 5. OB. Olive Bronze 15. PB Polished Brass PVD 6. BK Black 16. RG OR’osa PVD 7. WT White 17. UBB Un-Finished brushed Brass 8. UB Un-Finished Brass 18. VBB Vintage Brass Finish 9. BAu Brushed 24K Gold 19. BOX Brushed Onyx PVD 10. AU 24K Gold 20. BRG Brushed OR’osa PVD

Approval Holder:

Graff Faucets Co.

Company Name

Graff Faucets Co.

Address

3701 W. Burnham St. Milwaukee, WI 5315

Country

USA

Phone

+1 414.649.9850

General Email

techsupport@graff-faucets.com

View All Listings by this Company

Range of shower heads with chromium plated ABS bodies. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 75°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305316

Size:

½” BSP (F)

Marking:

Goloy, WRAS & date of manufacture (YYYY) on body.

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

A270103 A262103

Approval Holder:

Xiamen Oshince Sanitary Co., Ltd.

Company Name

Xiamen Oshince Sanitary Co., Ltd.

Address

3rd and 4th Floors, No.18-10, Xiafei Road Haicand District Xiamen

Postcode

361026

Country

China

General Email

yonghuacheng@wdiplumbing.com

View All Listings by this Company

Manufacturer:

Xiamen Oshince Sanitary Co., Ltd.

Company Name

Xiamen Oshince Sanitary Co., Ltd.

Address

3rd and 4th Floors, No.18-10, Xiafei Road Haicand District Xiamen

Postcode

361026

Country

China

General Email

yonghuacheng@wdiplumbing.com

View All Listings by this Company

Range of Y type strainers with blue epoxy coated ductile iron bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C

Section:

1715 Strainers

Size:

DN50 up DN400 flanged inlet and outlet

Marking:

Tyne logo, WRAS, size and pressure on data plate on body. DN & PN on body

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

74161 & 74251

Approval Holder:

Tyne Gulf Industrial Company

Company Name

Tyne Gulf Industrial Company

Address

PO BOX 25409, AL RAFAYAA, AL KHARAJ ROAD,RIYADH 11456

View All Listings by this Company

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2304085

Size:

See Models

Marking:

Albion logo, size & CR on body (DZR Brass Models) Albion logo & size on body (Brass Models)

Installation Requirements:

R001 R511

Expiry date:

30/04/2028

Model:

DZR Brass Models: ART 514 & ART 515 (15mm Spigot) ART 510 1/2” (1/2” BSP (M)) ART 510 3/4" (3/4” BSP (M)) Brass Models (can be chrome plated or not): ART 14 (15mm Spigot) ART 15 (15mm Spigot) ART 15C (15mm Spigot) ART 10 (1/2” BSP (M)) ART 10 (3/4” BSP (M))

Approval Holder:

Albion Valves (UK) Limited

Company Name

Albion Valves (UK) Limited

Address

9a Fallbank Industrial Estate Dodworth Barnsley

Postcode

S75 3LS

Country

United Kingdom

Phone

01226 729900

General Email

samjed@albionvalvesuk.com

View All Listings by this Company

Range of draining taps with DZR brass, brass or chrome plated brass bodies. Incorporating a rising spindle headwork, EPDM or NBR seals and washers. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2304090

Size:

See Models

Marking:

Brymec Logo, WRAS, Flow arrow and size on body.

Installation Requirements:

R001 R511

Expiry date:

30/04/2028

Model:

Brass Models (can be chrome plated or not): 30298: 15mm Drain off cock long spigot (15mm Spigot) 31150: 15mm Drain off cock (15mm Spigot) 31151: ½" Threaded drain off cock (15mm Spigot) 31149: ¾" Threaded drain off cock (3/4” BSP (M))

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company