Plastic bodied flow sensor. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
‘Nova-Flo’ inline flow control device with a plastic body and EPDM ‘O’-rings. The product is intended to restrict the flow of water to a bath or basin if water level reaches the overflow. Float located within the overflow pathway activate flaps on each inlet to restrict the flow prior to the taps being closed. Maximum Working pressure 10.0 bar. Maximum operating temperature 60°C.
NIVUS range of flow sensors with stainless steel bodies. Sensors incorporate EPDM seals and a PTFE olive. Maximum working pressure 16.0 bar. Cold water use only.
Range of pumps incorporating a plastic body with stainless steel impellers, shaft and chambers. The inlet incorporate a stainless steel strainer. Maximum working pressure 2.4 bar (model HQ200). Maximum working pressure 3.1 bar (model HQ400). Maximum working pressure 3.3 bar (model HQ800). Cold water use only.
Range of cold water supply booster sets, incorporating a stainless steel manifold system and between 1 and 4 pumps depending on model. The booster sets also incorporate spherical valves, non-return valves, pressure switches/sensors and expansion vessels. Maximum working pressure 10.0 bar or 16.0 bar, dictated by the pump model(s) fitted. Cold water use only.
Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O`-rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Maximum working pressure 3.0 bar. Maximum operating temperature 65°C.
Self-priming electric booster pump with plastic body incorporating plastic impellers with variable speed settings, and a non-return return valve (not suitable for backflow protection). Maximum working pressure 8.0 bar. Cold water use only.
Wall mounted angled shower outlet with a brass body (various finishes) and NBR ‘O’-rings. The wall outlet and the inlet of the shower handset both incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working temperature 60°C.
Range of shower outlets/arms (chromium plated brass or chromium plated ABS bodies). Maximum operating temperature 65°C.
Range of brass shower arms and plastic shower heads (various finishes) incorporating EPDM seals and ‘O’-rings, silicone seals and spray insert. The 26 469 xxx model is ceiling mounted & 26 470 xxx model is wall mounted. Both models incorporate a swivel joint housing a plastic flow regulator. Maximum operating temperature 60°C.
Range of interlocked EPDM lined shower hoses assemblies with EPDM gaskets. Maximum operating temperature is 85°C. bar.
Range of over head shower outlets with stainless steel bodies (various finishes). Inlets incorporate silicone washer with stainless-steel strainer. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Range of overhead wall mounted shower outlets with brass bodies (various finishes), incorporating a plastic aerator and stainless-steel strainers on two of the three inlets to the main body. The 35 283 xxx models also incorporate plastic flow regulators on all three of the inlets to the main body. Maximum operating temperature 60°C.
Range of shower handsets (chromium plated ABS) with stainless steel strainers and a built-in approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Model 28016979-00 has an adjustable flow pattern which switches between 3 patterns. Maximum operating temperature 60°C
Range of wall mounted shower outlets in various finishes. Maximum operating temperature 80°C.
Range of Y-pattern strainers with DZR brass bodies and stainless steel strainers. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (BSP threaded models 2½”-3” and compression models). Maximum operating temperature 85°C.
Range of in-line `Y`-patterned strainers with bronze bodies incorporating stainless steel mesh strainers and PTFE washers. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Range of pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate plastic flow straighteners and the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of bath pillar taps with brass bodies (various finishes). Incorporating a non-rising spindle headworks with various operating members. The spout outlets incorporates a plastic flow straightener. The product is supplied with either metal or plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of basin pillar taps with brass bodies (various finishes). Incorporating a non-rising spindle headworks with various operating members. Spout outlets incorporate a plastic flow straightener. Products are supplied with either plastic or metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Page 14 of 560
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
