Easyzon range of chemical blenders, consisting of a reaction chamber and pressure reducing valve inlet arrangement only. Maximum working pressure 8.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2010093

Note:

The approval covers the reaction chamber and inlet valve arrangement only.

Size:

½” BSP (F)

Marking:

LUTZ JESCO ON LABEL ON BODY

Installation Requirements:

R001 R008 R120 R160 R170 R415 R575

Expiry date:

31/10/2025

Model:

LJED5/230 EASYZON D 5G/H SYSTEM, LJED10/230 EASYZON D 10G/H SYSTEM, LJED20/230 EASYZON D 20G/H SYSTEM & LJED40/230 EASYZON D 40G/H SYSTEM DOSING EQUIPMENT

Approval Holder:

LUTZ-JESCO GB LTD

Company Name

LUTZ-JESCO GB LTD

Address

UNIT C1, LOADES ECOPARC BLACKHORSE ROAD COVENTRY

Postcode

CV7 9FW

General Email

tosh.singh@lutz-jesco.com

View All Listings by this Company

Range of LK press fittings with brass bodies and stainless steel sleeves for use with LK Universal PEX pipe. Jointing is achieved by hydraulic compression. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011334

Size:

See model

Marking:

LK & product information on sleeve of fitting. LK & technical information on pipe.

Installation Requirements:

R001 R008

Expiry date:

30/11/2025

Model:

LK PE-X Universal Pipe X 188 23 35 - 16x2,0 & 188 25 41 - 20x2,5 LK PressPex Fittings 187 65 00 Straight fitting AX16 187 65 01 Straight fitting AX20 187 65 04 Straight fitting AX20xAX16 187 65 06 Straight fitting male AX16x½" 187 65 08 Straight fitting male AX20x¾" 187 65 13 Straight fitting fem AX16x½" 187 65 15 Straight fitting fem AX20x¾" 187 65 30 Elbow fitting 90° AX16 187 65 31 Elbow fitting 90° AX20 187 65 36 Elbow fitting male AX16x½" 187 65 38 Elbow fitting male AX20x¾" 187 65 41 Elbow fitting female AX16x½" 187 65 43 Elbow fitting female AX20x¾" 187 65 50 T-piece AX16 187 65 51 T-piece AX20 187 65 65 T-piece male thread AX16x½" 187 65 67 T-piece male thread AX20x¾" 187 65 73 T-piece female AX16x½" 187 65 75 T-piece female AX20x¾" 187 65 92 Cap AX16 187 65 93 Cap AX20 187 66 08 Pressfitting adapter ½" /AX16 187 66 06 Pressfitting adapter ¾"/AX16 187 66 05 Pressfitting adapter ½" /AX20 187 66 07 Pressfitting adapter ¾" /AX20 187 65 27 Straight fitting AX16x½" 187 65 25 Straight fitting AX20x¾" 295 07 Fitting for wallbox

Product Images

Approval Holder:

LK Systems

Company Name

LK Systems

View All Listings by this Company

Range of Aquaterra PP-RCT socket fusion fittings for use with Aquaterra PP-RCT SDR 6 pipe and Aquaterra PP-RCT SDR 7.4 pipe (manufactured to EN ISO 15874). Maximum working pressure 10.0 bar. Maximum working temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012068

Size:

20mm, 25mm, 32mm, 40mm, 50mm & 63mm. Male & Female connections ½” to 2”

Marking:

For PIPE Trade name “AQUATERRA”, “FASER COMPOSITE STABIL PIPE PP-RCT”, size, SDR, “EN ISO 15874” “DIN 8077/8078”, code for machine, manufacture date and time (DD/MM/YYYY) (HH:MM:SS), manufacturing location, Batch number on pipe For Fitting Trade name “AQTERRA”, “PP-RCT TYPE 4”, PN and size on fitting body.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Aquaterra PP-RCT SDR 6 Fiber PIPE AT6622032 AT6622532 AT6623232 AT6624032 AT6625032 AT6626332 Aquaterra PP-RCT SDR 7.4 Fiber PIPE AT6622025 AT6622525 AT6623225 AT6624025 AT6625025 AT6626325 Aquaterra PP-RCT Coupler ATPPRCT6554020 ATPPRCT6554025 ATPPRCT6554032 ATPPRCT6554040 ATPPRCT6554050 ATPPRCT6554063 Aquaterra PP-RCT Elbow 90° ATPPRCT6555020 ATPPRCT6555025 ATPPRCT6555032 ATPPRCT6555040 ATPPRCT6555050 ATPPRCT6555063 Aquaterra PP-RCT Equal Tee ATPPRCT6557025 ATPPRCT6557025 ATPPRCT6557032 ATPPRCT6557040 ATPPRCT6557050 ATPPRCT6557063 AquaTerra PP-RCT Reducer ATPPRCT6562520 ATPPRCT6564020 ATPPRCT6563225 ATPPRCT6564032 ATPPRCT6565025 ATPPRCT6565032 ATPPRCT6565040 ATPPRCT6566340 ATPPRCT6566350 AquaTerra PP-RCT Female Adaptor ATPPRCT7052012 ATPPRCT7052512 ATPPRCT7052534 ATPPRCT7053201 Aquaterra PP-RCT Male Adaptor ATPPRCT7062012 ATPPRCT7062512 ATPPRCT7062534 ATPPRCT7063201 ATPPRCT7064014 ATPPRCT7065012 ATPPRCT7066302 Aquaterra PP-RCT Female Elbow 90° ATPPRCT7082012 ATPPRCT7082512 Aquaterra PP-RCT Female Tee ATPPRCT7102012 ATPPRCT7102512 ATPPRCT7103212

Product Images

Approval Holder:

Aquagas Plastic Industries LLC

Company Name

Aquagas Plastic Industries LLC

View All Listings by this Company

Viega ‘Raxofix’ press connection fittings for use with viega Raxofix PE-Xc/Al/PE-Xc pipes. For above ground use only. Maximum working pressure 10 bar. Maximum operating temperature 70°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012344

Size:

Please refer to model.

Marking:

Viega, size & technical information on fitting body. Viega Raxofix PE/Xc/Al/PE-Xc & technical information on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Gunmetal Fittings : 5311 - Adapter with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ 53118 - Adapter with BSP (F) 16x½ 5312 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ 5313 - Plug-in piece 16x15 - 16x18 - 20x18 - 20x22 - 25x22 - 32x28 5313P - Plug-in piece 16x15 - 16x18 - 20x15 - 20x18 - 20x22 -25x22 - 32x28 5314 - 90° elbow with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x¾ - 25x1 - 32x1 531411 - 90° elbow with BSP (M) 16x½ - 20x½ - 20x¾ - 25x¾ - 32x1 5315 - Coupling 16x16 - 20x20 - 20x16 - 25x25 - 25x16 -25x20 - 32x32 - 32x16 - 32x20 - 32x25 53153 - Coupling 16x16 - 20x20 - 25x25 - 32x32 5316 - 90° elbow 16x16 - 20x20 - 25x25 - 32x32 53168 - 90° elbow with BSP (F) 16x½ 5317 - T-piece with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 - 25x¾x25 - 32x1x32 - 32x¾x32 5318 - T-piece 16x16x16 - 16x20x16 - 20x20x20 - 20x16x16 - 20x16x20 - 20x20x16 - 25x25x25 - 25x16x16 - 25x16x20 - 25x16x25 - 25x20x20 - 25x20x25 - 25x25x16 - 25x25x20 - 32x32x32 - 32x16x25 - 32x16x32 - 32x20x20 - 32x20x32 - 32x25x25 - 32x25x32 53188 - T-piece with BSP (F) 16x½x16 - 20x½x20 53189 - manifold with BSP (M) ½x16 532161 - mounting unit with BSP (F) 16x½x80/100/150 532171 - mounting unit with BSP (F) 16x½x70/100/150 532181 - mounting unit with BSP (F) 16x½x150 53223 - Plug-in piece 16 – 20 5323 - mounting unit with BSP (F) 16x½ 53243 - wall plate T-piece with BSP (F) 16x½x16 - 20x½x20 5325 - wall plate with BSP (F) 16x½x70 - 16x½x90 53254 - wall plate with BSP (M) 16x½ - 20x½ 53255 - wall plate with BSP (F) 16x½ - 20x½ - 20x¾ 53256 - double wall plate with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 53257 - double wall plate with BSP (F) 16x½x16 - 20x½x16 - 20x½x20 - 25x½x20 - 25x½x25 532578 - Y-double wall plate with BSP (F) 16x16x½ - 20x20x½ - 25x25x½ 53258 - T-piece with BSP(F) 16x½x16 - 20x½x20 - 20x¾x20 5326 - 45° elbow 25x25 - 32x32 532605 - manifold with BSP (M) 16x¾x4 532606 - manifold with BSP (M/F) 16x¾x2 532607 - manifold with BSP (M) 16x¾x3 532608 - manifold with BSP (F) 16x¾x3 532609 - manifold with BSP (F) 16x¾x5 532631 - T-piece with BSP(M) ½x16 532632 - T-piece with plug-in end 15x16 53264 - T-piece with BSP(M) ½x16x16 - ¾x16x16 – ¾x20x20 5329 - screw fitting with viega cone 16x¾ – 20x¾ 53321 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 16x ½ x ¾ x55 - 20x ½ x ¾ x35 - 20x ½ x ¾ x47 533211 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x18 - 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x55 533231 - wall lead-in with BSP (M/F) 16x ½ x ¾ x30 53324 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 20x ½ x ¾ x35x20 - 20x ½ x ¾ x47 533281 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 5355 - 90° adapter with BSP (F) 16x½ - 16x¾ 5356 - Cap 16 - 20 - 25 - 32 5363 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x¾ - 25x1 - 25x1¼ - 25x1½ - 32x1¼ - 32x1½ 5381 - screw fitting with euro cone 16x ¾ - 20x¾ multilayer pipe (PE-Xc/Al/PE-Xc): 5301 - Pipe with protective pipe in grey 16x2,2 - 20x2,8 5302 - Pipe coil 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53023 - Pipe with 25mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 53024 - Pipe with 13mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53025 - Pipe with 9mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53026 - Pipe with 6mm concentric insulation 16x2,2 - 20x2,8 5303 - Pipe stick 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 5304 - Pipe with 25mm excentric insulation 16x2,2 - 20x2,8 - 25x2,7 53041 - Pipe with 9mm excentric insulation 16x2,2 - 20x2,8

Product Images

Approval Holder:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Manufacturer:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Viega ‘Raxofix’ press connection fittings for use with viega Raxofix PE-RT/Al/PE-RT pipes. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2012345

Size:

Please refer to model.

Marking:

Viega, size & technical information on fitting body. Viega Raxofix & technical information on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

5311- Adapter with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ - 40x1¼- 40x1½ 53118 - Adapter with BSP (F) 16x½ 5312 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ - 40x1¼ - 40x1½ 5313 - Plug-in piece 16x15 - 16x18 - 20x18 - 20x22 - 25x22 - 32x28 - 40x35 5313P - Plug-in piece 16x15 - 16x18 - 20x15 - 20x18 - 20x22 - 25x22 - 32x28 - 40x28 - 40x35 5314 - 90° elbow with BSP (M) 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x¾ - 25x1 - 32x1 - 40x1¼ 531411 - 90° elbow with BSP (M) 16x½ - 20x½ - 20x¾ - 25x¾ - 32x1 5315 - Coupling 16x16 - 20x20 - 20x16 - 25x25 - 25x16 - 25x20 - 32x32 - 32x16 - 32x20 - 32x25 - 40x40 - 40x16 - 40x32 53153 - Coupling 16x16 - 20x20 - 25x25 - 32x32 - 40x40 5316 - 90° elbow 16x16 - 20x20 - 25x25 - 32x32 - 40x40 53168 - 90° elbow with BSP (F) 16x½ 5317 - T-piece with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 - 25x¾x25 - 32x1x32 - 32x¾x32 - 40x¾x40 5318 - T-piece 16x16x16 - 16x20x16 - 20x20x20 - 20x16x16 - 20x16x20 - 20x20x16 - 25x25x25 - 25x16x16 - 25x16x20 - 25x16x25 - 25x20x20 - 25x20x25 - 25x25x16 - 25x25x20 - 32x32x32 - 32x16x25 - 32x16x32 - 32x20x20 - 32x20x32 - 32x25x25 - 32x25x32 - 40x40x40 - 40x16x40 - 40x20x40 - 40x25x32 - 40x25x40 - 40x32x32 - 40x32x40 53188 - T-piece with BSP (F) 16x½x16 - 20x½x20 53189 - manifold with BSP (M) ½x16 532161 - mounting unit with BSP (F) 16x½x80/100/150 532171 - mounting unit with BSP (F) 16x½x70/100/150 532181 - mounting unit with BSP (F) 16x½x150 53223 - Plug-in piece 16 – 20 5323 - mounting unit with BSP (F) 16x½ 53243 - wall plate T-piece with BSP (F) 16x½x16 - 20x½x20 5325 - wall plate with BSP (F) 16x½x70 - 16x½x90 53254 - wall plate with BSP (M) 16x½ - 20x½ 53255 - wall plate with BSP (F) 16x½ - 20x½ - 20x¾ 53256 - double wall plate with BSP (F) 16x½x16 - 20x½x20 - 25x½x25 53257 - double wall plate with BSP (F) 16x½x16 - 20x½x16 - 20x½x20 - 25x½x20 - 25x½x25 532578 - Y-double wall plate with BSP (F) 16x16x½ - 20x20x½ - 25x25x½ 53258 - T-piece with BSP(F) 16x½x16 - 20x½x20 - 20x¾x20 5326 - 45° elbow 25x25 - 32x32 - 40x40 532605 - manifold with BSP (M) 16x¾x4 532606 - manifold with BSP (M/F) 16x¾x2 532607- manifold with BSP (M) 16x¾x3 532608 - manifold with BSP (F) 16x¾x3 532609 - manifold with BSP (F) 16x¾x5 532631 - T-piece with BSP(M) ½x16 532632 - T-piece with plug-in end 15x16 53264 - T-piece with BSP(M) ½x16x16 - ¾x16x16 - ¾x20x20 5329 - screw fitting with viega cone 16x¾ - 20x¾ 53321 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 16x ½ x ¾ x55 - 20x ½ x ¾ x35 - 20x ½ x ¾ x47 533211 - 90° wall lead-in with BSP (M/F) 16x ½ x ¾ x18 - 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x55 533231 - wall lead-in with BSP (M/F) 16x ½ x ¾ x30 53324 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 - 16x ½ x ¾ x35 - 16x ½ x ¾ x47 - 20x ½ x ¾ x35x20 - 20x ½ x ¾ x47 533281 - double T piece wall lead-in with BSP (M/F) 16x ½ x ¾ x25 5355 - 90° adapter with BSP (F) 16x½ - 16x¾ 5356 - Cap 16 - 20 - 25 - 32 - 40 5363 - Adapter with BSP (F) 16x½ - 16x¾ - 20x½ - 20x¾ - 25x¾ - 25x1 - 25x1¼ - 25x1½ - 32x1¼ - 32x1½ - 40x1¼ - 40x1½ 5381 - screw fitting with euro cone 16x ¾ - 20x¾ multilayer pipe (PE-RT/Al/PE-RT): 5301 - Pipe with protective pipe in grey 16x2,2 - 20x2,8 5302 - Pipe coil 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53023 - Pipe with 25mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 53024 - Pipe with 13mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53025 - Pipe with 9mm concentric insulation 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 53026 - Pipe with 6mm concentric insulation 16x2,2 - 20x2,8 5303 - Pipe stick 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 - 40x3,5 5304 - Pipe with 25mm excentric insulation 16x2,2 - 20x2,8 - 25x2,7 53041- Pipe with 9mm excentric insulation 16x2,2 - 20x2,8 Fittings: 5311- Adapter with BSP (M): 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ - 40x1¼ - 40x1½. 53118 - Adapter with BSP (F): 16x½. 5312 - Adapter with BSP (F): 16x½ - 16x¾ - 20x½ - 20x¾ - 25x½ - 25x¾ - 25x1 - 25x1¼ - 32x1 - 32x1¼ - 40x1¼ - 40x1½. 5313 - Plug-in piece: 16x15 - 16x18 - 20x18 - 20x22 - 25x22 - 32x28 - 40x35. 5313P - Plug-in piece: 16x15 - 16x18 - 20x15 - 20x18 - 20x22 - 25x22 - 32x28 - 40x28 - 40x35. 5314 - 90° elbow with BSP (M): 16x½ - 16x¾ - 16x3/8 - 20x½ - 20x¾ - 25x¾ - 25x1 - 32x1 - 40x1¼. 531411 - 90° elbow with BSP (M): 16x½ - 20x½ - 20x¾ - 25x¾ - 32x1. 5315 - Coupling: 16x16 - 20x20 - 20x16 - 25x25 - 25x16 - 25x20 - 32x32 - 32x16 - 32x20 - 32x25 - 40x40 - 40x16 - 40x32. 53153 - Coupling: 16x16 - 20x20 - 25x25 - 32x32 - 40x40. 5316 - 90° elbow: 16x16 - 20x20 - 25x25 - 32x32 - 40x40. 53168 - 90° elbow with BSP (F): 16x½. 5317 - T-piece with BSP (F): 16x½x16 - 20x½x20 - 25x½x25 - 25x¾x25 - 32x1x32 - 32x¾x32 - 40x¾x40. 5318 - T-piece: 16x16x16 - 16x20x16 - 20x20x20 - 20x16x16 - 20x16x20 - 20x20x16 - 25x25x25 - 25x16x16 - 25x16x20 - 25x16x25 - 25x20x20 - 25x20x25 - 25x25x16 - 25x25x20 - 32x32x32 - 32x16x25 - 32x16x32 - 32x20x20 - 32x20x32 - 32x25x25 - 32x25x32 - 40x40x40 - 40x16x40 - 40x20x40 - 40x25x32 - 40x25x40 - 40x32x32 - 40x32x40. 53188 - T-piece with BSP (F): 16x½x16 - 20x½x20. 53189 - manifold with BSP (M): ½x16. 532161 - mounting unit with BSP (F): 16x½x80/100/150. 532171 - mounting unit with BSP (F): 16x½x70/100/150. 532181 - mounting unit with BSP (F): 16x½x150. 53223 - Plug-in piece: 16 - 20. 5323 - mounting unit with BSP (F): 16x½. 53243 - wall plate T-piece with BSP (F): 16x½x16 - 20x½x20. 5325 - wall plate with BSP (F): 16x½x70 - 16x½x90. 53254 - wall plate with BSP (M): 16x½ - 20x½. 53255 - wall plate with BSP (F): 16x½ - 20x½ - 20x¾. 53256 - double wall plate with BSP (F): 16x½x16 - 20x½x20 - 25x½x25. 53257 - double wall plate with BSP (F): 16x½x16 - 20x½x16 - 20x½x20 - 25x½x20 - 25x½x25. 532578 - Y-double wall plate with BSP (F): 16x16x½ - 20x20x½ - 25x25x½. 53258 - T-piece with BSP (F): 16x½x16 - 20x½x20 - 20x¾x20. 5326 - 45° elbow: 25x25 - 32x32 - 40x40. 532605 - manifold with BSP (M): 16x¾x4. 532606 - manifold with BSP (M/F): 16x¾x2. 532607- manifold with BSP (M): 16x¾x3. 532608 - manifold with BSP (F): 16x¾x3. 532609 - manifold with BSP (F): 16x¾x5. 532631 - T-piece with BSP (M): ½x16. 532632 - T-piece with plug-in end: 15x16. 53264 - T-piece with BSP(M): ½x16x16 - ¾x16x16 - ¾x20x20. 5329 - screw fitting with viega cone: 16x¾ - 20x¾. 53321 - 90° wall lead-in with BSP (M/F): 16x½x¾x25 - 16x½x¾x35 - 16x½x¾x47 - 16x½x¾x55 - 20x½x¾x35 - 20x½x¾x47. 533211 - 90° wall lead-in with BSP (M/F): 16x½x¾x18 - 16x½x¾x25 - 16x½x¾x35 - 16x½x¾x55. 533231 - wall lead-in with BSP (M/F): 16x½x¾x30. 53324 - double T piece wall lead-in with BSP (M/F): 16x½x¾x25 - 16x½x¾x35 - 16x½x¾x47 - 20x½x¾x35x20 - 20x½x ¾ x47 533281 - double T piece wall lead-in with BSP (M/F): 16x½x¾x25. 5355 - 90° adapter with BSP (F): 16x½ - 16x¾. 5356 - Cap: 16 - 20 - 25 - 32 - 40. 5363 - Adapter with BSP (F): 16x½ - 16x¾ - 20x½ - 20x¾ - 25x¾ - 25x1 - 25x1¼ - 25x1½ - 32x1¼ - 32x1½ - 40x1¼ - 40x1½. 5381 - screw fitting with euro cone: 16x ¾ - 20x¾. Multilayer pipe (PE-RT/Al/PE-RT): 5301 - Pipe with protective pipe in grey: 16x2,2 - 20x2,8. 5302 - Pipe coil: 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2. 53023 - Pipe with 25mm concentric insulation: 16x2,2 - 20x2,8 - 25x2,7. 53024 - Pipe with 13mm concentric insulation: 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2. 53025 - Pipe with 9mm concentric insulation : 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2. 53026 - Pipe with 6mm concentric insulation : 16x2,2 - 20x2,8. 5303 - Pipe stick: 16x2,2 - 20x2,8 - 25x2,7 - 32x3,2 - 40x3,5. 5304 - Pipe with 25mm excentric insulation: 16x2,2 - 20x2,8 - 25x2,7. 53041- Pipe with 9mm excentric insulation: 16x2,2 - 20x2,8. Models added March 2022 Fittings: 5311 - Adapter with BSP (M): 50x1½ - 63x2. 5312 - Adapter with BSP (F): 50x1¼ - 50x1½ - 63x2. 5313 - Plug-in piece: 50x42. 5313P - Plug-in piece: 50x35 - 63x54. 5315 - Coupling: 50x50 - 50x40 - 63x63 - 63x50. 53153 - Coupling: 50x50 - 63x63. 5316 - 90° elbow: 50x50 - 63x63. 5317 - T-piece with BSP (F): 50x1x50 - 63x1x63. 5318 - T-piece: 50x50x50 - 50x16x50 - 50x25x50 - 50x32x50 - 50x40x50 - 63x63x63 - 63x25x63 - 63x32x63 - 63x40x63 - 63x50x63. 5326 - 45° elbow: 50x50 - 63x63. 5356 - Cap: 50. Multilayer pipe (PE-RT/Al/PE-RT): 5303 - Pipe stick: 50x4,0 - 63x4,5.

Product Images

Approval Holder:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

Manufacturer:

Viega GmbH & Co KG

Company Name

Viega GmbH & Co KG

Address

Viega Platz 1, D-57439 Attendorn

Country

Germany

View All Listings by this Company

FloFit range of push fit fittings (polybutylene body) for use with Qual-Pex Barrier Pipe, Qual-PB polybutylene barrier pipe or copper tube. Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101806

Size:

see model

Marking:

FloFit+ on body of fitting. Kitemark and size on collet of fitting.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupling: FC10 – 10mm FC15 – 15mm FC22 – 22mm FC28 – 28mm Reducing Coupling: FRC15 – 15mm x 10mm FRC22 – 22mm x 15mm Straight Stem Reducer: FSR1015 – 10mm x 15mm FSR1522 – 15mm x 22mm FSR1528 – 15mm x 28mm FSR2228 – 22mm x 28mm 90° Elbow: FB10 – 10mm FB15 – 15mm FB22 – 22mm FB28 – 28mm Equal Tee: FT10 – 10mm FT15 – 15mm FT22 – 22mm FT28 – 28mm Reducing Tee: FRT151010 – 15mm x 10mm x 10mm FRT151510 – 15mm x 15mm x 10mm FRT151522 – 15mm x 15mm x 22mm FRT221515 – 22mm x 15mm x 15mm FRT221522 – 22mm x 15mm x 22mm FRT222210 – 22mm x 22mm x 10mm FRT222215 – 22mm x 22mm x 15mm FRT282222 – 28mm x 22mm x 22mm FRT282228 – 28mm x 22mm x 28mm FRT282815 – 28mm x 28mm x 15mm FRT282822 – 28mm x 28mm x 22mm FRT222228 – 22mm x 22mm x 28mm Stem Elbow: FS10 – 10mm FS15 – 15mm FS22 – 22mm Stop End: FE10 – 10mm FE15 – 15mm FE22 – 22mm FE28 – 28mm Outlets Socket/Socket Manifold: FM15410SK/SK – 15mm Pipe x 4 – 10mm FM15410SK/SP – 15mm Pipe x 4 – 10mm FM15210SK/SK – 15mm Pipe x 2 – 10mm FM15210SK/SP – 15mm Pipe x 2 – 10mm FM22410SK/SK – 22mm Pipe x 4 – 10mm FM22410SK/SP – 22mm Pipe x 4 – 10mm FM22210SK/SK – 22mm Pipe x 2 – 10mm FM22210SK/SP – 22mm Pipe x 2 – 10mm FM22415SK/SK – 22mm Pipe x 4 – 15mm FM22415SK/SP – 22mm Pipe x 4 – 15mm FM22215SK/SK – 22mm Pipe x 2 – 15mm FM22215SK/SP – 22mm Pipe x 2 – 15mm Straight Tap Connector: FTC1512 – 15mm x ½” FTC1534 – 15mm x ¾” FTC2234 – 22mm x ¾” Bent Tap Connector: FBC1512 – 15mm x ½” Blue Collet Clip (Cold Water Use): FCB10 – 10mm FCB15 – 15mm FCB22 – 22mm FCB28 – 28mm Red Collet Clip (Hot Water Use): FCR10 – 10mm FCR15 – 15mm FCR22 – 22mm FCR28 – 28mm Blue Polybutylene Pipe Insert: FPI10 – 10mm FPI15 – 15mm FPI22 – 22mm FPI28 – 28mm White PE-X Pipe Insert: FXI10 – 10mm FXI15 – 15mm FXI22 – 22mm FXI28 – 28mm

Approval Holder:

FloPlast Ltd

Company Name

FloPlast Ltd

Address

Eurolink Business Park Castle road Sittingbourne

Postcode

ME20 3FP

Country

United Kingdom

Phone

01795431731

General Email

henyb@floplast.co.uk

View All Listings by this Company

Manufacturer:

FloPlast Ltd

Company Name

FloPlast Ltd

Address

Eurolink Business Park Castle road Sittingbourne

Postcode

ME20 3FP

Country

United Kingdom

Phone

01795431731

General Email

henyb@floplast.co.uk

View All Listings by this Company

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings. For use with stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011045

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139, 168mm. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F). DN50 to DN150 Flanged.

Marking:

Numepress, logo & size on body

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F1 Coupling from 15 to 168.3 F2 Slip Coupling from 15 to 168.3 F3 90Q Female-Female Elbow from 15 to 168.3 F4 90Q Male - Female Elbow from 15 to 168.3 F5 45Q Female-Female Elbow from 15 to 168.3 F6 45Q Female - Male Elbow from 15 to 168.3 F7 Female Angle Adapter from 15 1/2" to 54 2" F8 Male Angle Adapter from 15 1/2" to 54 2" F9 Female Elbow with Wallnut from 15 1/2" to 22 3/4" Fl0 90Q Elbow with Plane Ends from 15 to 54 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" F12 Female tee threaded adaptor from 15 1/2" to 108 2" F14 Reducer from 18-15 to 168.3-139.7 F15 Reducing tee from 18-15 to 168.3-139.7 F16 Equal Tee from 15 to 168.3 F17 Female adaptor from 15 3/ 8" to 88.9 3" F18 M ale adaptor from 15 3/8" to 108 4" F19 Flanges adaptor from 15 DN15 to 108 DNlO0 F20 Pre-formed pipe bridge from 15 to 28 F21 Plug from 15 to 108 F22 Air tuve Pipe Bridge from 15 to 28 F23 Pipe Bridge from 15 to 28 F24 3 Pieces adaptor from 15 to 60.3 F25 Female -Female pipe bridge from 15 to 28 F26 Female connector from 15 1/2" to 54 2" F27 Male connector from 15 1/2" to 54 2" F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" F37 Male threaded cross from 15 1/2" to 108-4" F38 Female threaded cross from 15 1/ 2" to 108 4" F39 90Q Male angle adaptor from 15 3/8" to 54 2" F41 Male union connector gas from 15 1/ 2" to 54 2" F42 Female Union connector gas from 15 1/2" to 54 2" F43 Grooved Transition from 3/4" to 2" F44 Van Stone flange from 1/2" to 2" F45 Union Gas Female threaded from 15 3/4" to 54 2" F46 Straight union with press fitting on both ends from 15 to 54 F47 Half coupling from 15 to 168.3 F48 30Q Female-Female elbow from 15 to 108 F49 30Q Elbow with plain ends from 15 to 54 F50 15Q Female-female elbow from 15 to 108 F51 60Q Female-female elbow from 15 to 108 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 F53 Pipe penetration from 15 to 108 F54 Male plug from 16 to 168.3 F55 Weld Adaptor from 15 to 60.3 F56 75Q Female -Female elbow from 15 to 108 F57 l0Q Female-Female elbow from 15 to 108 F58 60Q Elbow with plain ends from 15 to 54 F59 lSQ Elbow with plain ends from 15 to 54 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 F63 7SQ Elbow with plain ends from 15 to 54 F64 15Q Male -female elbow from 15 to 108 F65 Male-Female pipe penetration from 15 to 108 F66 30Q Male-female elbow from 15 to 108 F72 45Q Elbow with plain ends from 15 to 54 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm rv,Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

‘Epsilon Series’ polypropylene bodied compression fittings with EPDM ‘O’-rings for use with Elysee PE80 blue pipes. The fittings are supplied with a pipe liner. Above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010385

Note:

The liners supplied with each fitting must be used to maintain the validity of this approval. R008 applies to the connecting blue pipework when used above ground.

Size:

See model

Marking:

Fittings: Elysee, DVGW, EU, size and PN on the compression nut. Size and date of manufacture (clock format) on body. Pipe: Elysee, EN12201, size, PN and production date code (CDDMMY, where C = decade, and is replaced with 6 to indicate 2020).

Installation Requirements:

R001 R008

Expiry date:

31/10/2025

Model:

ELYSEE COMRESSION FITTINGS: Male Adaptor 330: 330002001: Ø 20 x ½". 330002002: Ø 20 x ¾". 330002003: Ø 20 x 1". 330002501: Ø 25 x ½". 330002502: Ø 25 x ¾". 330002503: Ø 25 x 1". 330003201: Ø 32 x ½". 330003202: Ø 32 x ¾". 330003203: Ø 32 x 1". 330003204: Ø 32 x 1¼". 330003205: Ø 32 x 1½". Female Adaptor 330A: 330A02001: Ø 20 x ½". 330A02002: Ø 20 x ¾". 330A02010: Ø 20 x ⅜". 330A02501: Ø 25 x ½". 330A02502: Ø 25 x ¾". 330A02503: Ø 25 x 1". 330A03201: Ø 32 x ½". 330A03202: Ø 32 x ¾". 330A03203: Ø 32 x 1". 330A03204: Ø 32 x 1¼". 330A03205: Ø 32 x 1½". End Plug 330B: 330B00020: Ø 20. 330B00025: Ø 25. 330B00032: Ø 32. Coupling 331: 331020020: Ø 20 x 20. 331025025: Ø 25 x 25. 331032032: Ø 32 x 32. Reducing Coupling 331A: 331A02520: Ø 25 x 20. 331A03220: Ø 32 x 20. 331A03225: Ø 32 x 25. Elbow 332: 332020020: Ø 20 x 20. 332025025: Ø 25 x 25. 332032032: Ø 32 x 32. Male Elbow 332A: 332A02001: Ø 20 x ½". 332A02002: Ø 20 x ¾". 332A02501: Ø 25 x ½". 332A02502: Ø 25 x ¾". 332A02503: Ø 25 x 1". 332A03202: Ø 32 x ¾". 332A03203: Ø 32 x 1". Female Elbow 332B: 332B02001: Ø 20 x ½". 332B02002: Ø 20 x ¾". 332B02501: Ø 25 x ½". 332B02502: Ø 25 x ¾". 332B02503: Ø 25 x 1". 332B03202: Ø 32 x ¾". 332B03203: Ø 32 x 1". Female Tee 333: 333002001: Ø 20 x ½" x 20. 333002002: Ø 20 x ¾" x 20. 333002501: Ø 25 x ½" x 25. 333002502: Ø 25 x ¾" x 25. 333002503: Ø 25 x 1" x 25. 333003202: Ø 32 x ¾" x 32. 333003203: Ø 32 x 1" x 32. Male Tee 333A: 333A02001: Ø 20 x ½" x 20. 333A02002: Ø 20 x ¾" x 20. 333A02003: Ø 20 x 1" x 20. 333A02501: Ø 25 x ½" x 25. 333A02502: Ø 25 x ¾" x 25. 333A02503: Ø 25 x 1" x 25. 333A03201: Ø 32 x ½" x 32. 333A03202: Ø 32 x ¾" x 32. 333A03203: Ø 32 x 1" x 32. Tee 334: 334020020: Ø 20 x 20 x 20. 334025025: Ø 25 x 25 x 25. 334032032: Ø 32 x 32 x 32. Reducing Tee 334A: 334A02520: Ø 25 x 20 x 25. 334A03225: Ø 32 x 25 x 32. Wall Female Elbow 332D: 332D02001: Ø 20 x ½". 332D02502: Ø 25 x ¾". Elbow Female For POP-UP 332C: 332C02501: Ø 25 x ½" x 25. 332C03201: Ø 32 x ½" x 32. 332C03202: Ø 32 x ¾" x 32. Universal Adaptor 321C: 321C02522: Ø 25 x 22. 321C03222: Ø 32 x 22. Repair Coupling 331B: 331B00025: Ø 25 x 25. 331B00032: Ø 32 x 32. ELYSEE PE80 BLUE PIPES: 21125020***: 20mmX2.3mm, SDR9, SF1.25, PN12.5. 21125025***: 25mmX2.3mm, SDR11, SF1.25, PN12.5. 21125032***: 32mmX3.0mm, SDR11, SF1.25, PN12.5. Where *** = length of the pipe coil, (025 = 25m, 050 = 50m, 100 = 100m).

Approval Holder:

Elysee Irrigation Ltd.

Company Name

Elysee Irrigation Ltd.

Address

5, Pentadaktylou St. 2643 Ergates Industrial Area, Nicosia

Country

Cyprus

Phone

+357 22 455 000

View All Listings by this Company

Manufacturer:

Elysee Irrigation Ltd.

Company Name

Elysee Irrigation Ltd.

Address

5, Pentadaktylou St. 2643 Ergates Industrial Area, Nicosia

Country

Cyprus

Phone

+357 22 455 000

View All Listings by this Company

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011331

Size:

See model.

Marking:

DOZ and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.

Product Images

Approval Holder:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Manufacturer:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Range of copper solder ring fittings for use with copper tube. For above and below ground use. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011048

Size:

8mm - 54mm.

Marking:

Manufacturer’s logo and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F05 - Solder Ring Elbow. F01 - Solder Ring Coupling. F11 - Solder Ring Tee.

Product Images

Approval Holder:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

Linhai Hengye Tubing Equipment Co Ltd

Company Name

Linhai Hengye Tubing Equipment Co Ltd

Address

Duqiao, Linhai, Zhejiang

Country

China

View All Listings by this Company

Range of brass caplillary fittings for use with EN1057 copper tube. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011363

Size:

See model.

Marking:

Flomasta and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

EPH_WSP19_1646 15mm x G1/2” Elbow. EPH_WSP19_2610 15mm x G1/2” Elbow. EPH_WSP19_2611 15mm x G1/2” Elbow. EPH_WSP19_1642 15mm x R1/2” Straight. EPH_WSP19_1645 15mm x G1/2” Straight. EPH_WSP19_1643 22mm x G3/4” Straight.

Approval Holder:

Kingfisher PLC

Company Name

Kingfisher PLC

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of copper solder ring fittings for use with copper tube. For above ground use only. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101804

Size:

SEE MODEL

Marking:

JT (brand logo) and size on body (8mm models) JT (brand logo), size, WRAS and EN1254 on body (all other sizes)

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Equal Diameter Straighter: SRC-08: 8mm. SRC-10: 10mm. SRC-12: 12mm. SRC-15: 15mm. SRC-22: 22mm. SRC-28: 28mm. SRC-35: 35mm. SRC-42: 42mm. SRC-54: 54mm. Straighter without groove: SRCS-15: 15mm. SRCS-22: 22mm. SRCS-28: 28mm. SRCS-35: 35mm. SRCS-42: 42mm. SRCS-54: 54mm. Reducing Straighter: SRRC-1008: 10-08mm. SRRC-1508: 15-08mm. SRRC-1510: 15-10mm. SRRC-1512: 15-12mm. SRRC-2215: 22-15mm. SRRC-2815: 28-15mm. SRRC-2822: 28-22mm. SRRC-3522: 35-22mm. SRRC-3528: 35-28mm. SRRC-4222: 42-22mm. SRRC-4228: 42-28mm. SRRC-4235: 42-35mm. SRRC-5435: 54-35mm. SRRC-5442: 54-42mm. Socket straighter: SRFR-1008: 10-08mm. SRFR-1208: 12-08mm. SRFR-1210: 12-10mm. SRFR-1508: 15-08mm. SRFR-1510: 15-10mm. SRFR-1512: 15-12mm. SRFR-2215: 22-15mm. SRFR-2815: 28-15mm. SRFR-2822: 28-22mm. SRFR-3515: 35-15mm. SRFR-3522: 35-22mm. SRFR-3528: 35-28mm. SRFR-4215: 42-15mm. SRFR-4222: 42-22mm. SRFR-4228: 42-28mm. SRFR-4235: 42-35mm. SRFR-5415: 54-15mm. SRFR-5422: 54-22mm. SRFR-5428: 54-28mm. SRFR-5435: 54-35mm. SRFR-5442: 54-42mm. 90° Elbow: SRE-08: 8mm. SRE-10: 10mm. SRE-15: 15mm. SRE-22: 22mm. SRE-28: 28mm. SRE-35: 35mm. SRE-42: 42mm. SRE-54: 54mm. 45° Elbow: SRE/45-10: 10mm. SRE/45-15: 15mm. SRE/45-22: 22mm. SRE/45-28: 28mm. SRE/45-35: 35mm. SRE/45-42: 42mm. SRE/45-54: 54mm. 90°Socket Elbow: SRES-10: 10 mm. SRES-15: 15mm. SRES-22: 22mm. SRES-28: 28mm. SRES-35: 35mm. SRES-42: 42mm. SRES-54: 54mm. 45°Socket Elbow: SRES/45-10: 10mm. SRES/45-15: 15mm. SRES/45-22: 22mm. SRES/45-28: 28mm. SRES/45-35: 35mm. SRES/45-42: 42mm. SRES/45-54: 54mm. Equal Diameter Tee: SRET-08: 8mm. SRET-10: 10mm. SRET-12: 12mm. SRET-15: 15mm. SRET-22: 22mm. SRET-28: 28mm. SRET-35: 35mm. SRET-42: 42mm. SRET-54: 54mm. Reducing Tee: SRRT-101015: 10x10x15mm. SRRT-151010: 15x10x10mm. SRRT-151015: 15x10x15mm. SRRT-151508: 15x15x08mm. SRRT-151510: 15x15x10mm. SRRT-151512: 15x15x12mm. SRRT-151522: 15x15x22mm. SRRT-221515: 22x15x15mm. SRRT-221522: 22x15x22mm. SRRT-222210: 22x22x10mm. SRRT-222215: 22x22x15mm. SRRT-222228: 22x22x28mm. SRRT-281515: 28x15x15mm. SRRT-281522: 28x15x22mm. SRRT-281528: 28x15x28mm. SRRT-282215: 28x22x15mm. SRRT-282222: 28x22x22mm. SRRT-282228: 28x22x28mm. SRRT-282815: 28x28x15mm. SRRT-282822: 28x28x22mm. SRRT-282835: 28x28x35mm. SRRT-352222: 35x22x22mm. SRRT-352235: 35x22x35mm. SRRT-352822: 35x28x22mm. SRRT-352828: 35x28x28mm. SRRT-352835: 35x28x35mm. SRRT-353515: 35x35x15mm. SRRT-353522: 35x35x22mm. SRRT-353528: 35x35x28mm. SRRT-422828: 42x28x28mm. SRRT-422842: 42x28x42mm. SRRT-423535: 42x35x35mm. SRRT-423542: 42x35x42mm. SRRT-424215: 42x42x15mm. SRRT-424222: 42x42x22mm. SRRT-424228: 42x42x28mm. SRRT-424235: 42x42x35mm. SRRT-544254: 54x42x54mm. SRRT-545415: 54x54x15mm. SRRT-545422: 54x54x22mm. SRRT-545428: 54x54x28mm. SRRT-545435: 54x54x35mm. SRRT-545442: 54x54x42mm. Cap: SREC-08: 8mm. SREC-10: 10mm. SREC-15: 15mm. SREC-22: 22mm. SREC-28: 28mm. SREC-35: 35mm. SREC-42: 42mm. SREC-54: 54mm.

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company

Range of copper end feed fittings for use with copper tube. For above and below ground use. Maximum working pressure 25.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101805

Size:

SEE MODEL

Marking:

6mm & 8mm = JT (brand logo) and size on body. All other sizes = JT (brand logo) on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Straight Coupler: EFC-08: 8mm. EFC-10: 10mm. EFC-12: 12mm. EFC-15: 15mm. EFC-L-15: 15mm. EFC-18: 18mm. EFC-22: 22mm. EFC-L-22: 22mm. EFC-28: 28mm. EFC-L-28: 28mm. EFC-35: 35mm. EFC-42: 42mm. EFC-54: 54mm. EFC-67: 67mm. EFC-76: 76mm. EFC-108: 108mm. EFC-133: 133mm. EFC-159: 159mm. Slip Coupler: EFCS-15: 15mm. EFCS-18: 18mm. EFCS-22: 22mm. EFCS-28: 28mm. EFCS-35: 35mm. EFCS-42: 42mm. EFCS-54: 54mm. EFCS-67: 67mm. EFCS-76: 76mm. EFCS-108: 108mm. EFCS-133: 133mm. EFCS-159: 159mm. Reducing Coupler: EFRC-1008: 10-08mm. EFRC-1508: 15-08mm. EFRC-1510: 15-10mm. EFRC-1512: 15-12mm. EFRC-2215: 22-15mm. EFRC-L- 2215: 22-15mm. EFRC-2815: 28-15mm. EFRC-L- 2815: 28-15mm. EFRC-2822: 28-22mm. EFRC-3515: 35-15mm. EFRC-3522: 35-22mm. EFRC-3528: 35-28mm. EFRC-4215: 42-15mm. EFRC-4222: 42-22mm. EFRC-4228: 42-28mm. EFRC-4235: 42-35mm. EFRC-5415: 54-15mm. EFRC-5422: 54-22mm. EFRC-5428: 54-28mm. EFRC-5435: 54-35mm. EFRC-5442: 54-42mm. Fitting Reducer: EFFR-1008: 10-08mm. EFFR-1208: 12-08mm. EFFR-1210: 12-10mm. EFFR-1508: 15-08mm. EFFR-1510: 15-10mm. EFFR-1512: 15-12mm. EFFR-2215: 22-15mm. EFFR-L-2215: 22-15mm. EFFR-2815: 28-15mm. EFFR-2822: 28-22mm. EFFR-3515: 35-15mm. EFFR-3522: 35-22mm. EFFR-3528: 35-28mm. EFFR-4215: 42-15mm. EFFR-4222: 42-22mm. EFFR-4228: 42-28mm. EFFR-4235: 42-35mm. EFFR-5415: 54-15mm. EFFR-5422: 54-22mm. EFFR-5428: 54-28mm. EFFR-5435: 54-35mm. EFFR-5442: 54-42mm. EFFR-6715: 67-15mm. EFFR-6722: 67-22mm. EFFR-6728: 67-28mm. EFFR-6735: 67-35mm. EFFR-6742: 67-42mm. EFFR-6754: 67-54mm. EFFR-7628: 76-28mm. EFFR-7635: 76-35mm. EFFR-7642: 76-42mm. EFFR-7654: 76-54mm. EFFR-7667: 76-67mm. EFFR-10835: 108-35mm. EFFR-10842: 108-42mm. EFFR-10854: 108-54mm. EFFR-10867: 108-67mm. EFFR-10876: 108-76mm. Long Fitting Reducer with long tail: EFFRL-1508: 15-08mm. EFFRL-1510: 15-10mm. 90° Long Street Elbow: EFESL-12: 12 mm. EFESL-15: 15 mm. EFESL-18: 18mm. EFESL-22: 22 mm. EFESL-28: 28mm. EFESL-35: 35mm. EFESL-42: 42mm. EFESL-54: 54mm. EFESL-67: 67mm. EFESL-76: 76mm. EFESL-108: 108mm. EFESL-133: 133mm. EFESL-159: 159mm. 90° Long Elbow: EFE-L-12: 12 mm. EFE-L-15: 15 mm. EFE-L-18: 18mm. EFE-L-22: 22 mm. EFE-L-28: 28mm. EFE-L-35: 35mm. EFE-L-42: 42mm. EFE-L-54: 54mm. EFE-L-67: 67mm. EFE-L-76: 76mm. EFE-L-108: 108mm. EFE-L-133: 133mm. EFE-L-159: 159mm. 90° Elbow: EFE-06: 6mm. EFE-08: 8mm. EFE-10: 10mm. EFE-15: 15mm. EFE-L-15: 15mm. EFE-18: 18mm. EFE-22: 22mm. EFE-L-22: 22mm. EFE-28: 28mm. EFE-L-28: 28mm. EFE-35: 35mm. EFE-42: 42mm. EFE-54: 54mm. EFE-67: 67mm. EFE-76: 76mm. EFE-108: 108mm. EFE-133: 133mm. EFE-159: 159mm. 45° Elbow: EFE/45-8: 8mm. EFE/45-10: 10mm. EFE/45-15: 15mm. EFE-L/45-15: 15mm. EFE/45-18: 18mm. EFE/45-22: 22mm. EFE-L/45-22: 22mm. EFE/45-28: 28mm. EFE-L/45-28: 28mm. EFE/45-35: 35mm. EFE/45-42: 42mm. EFE/45-54: 54mm. EFE/45-67: 67mm. EFE/45-76: 76mm. EFE/45-108: 108mm. EFE/45-159: 159mm. 90° Street Elbow: EFES-8: 8mm. EFES-10: 10 mm. EFES-15: 15mm. EFES-L-15: 15mm. EFES-18: 18mm. EFES-22: 22mm. EFES-L-22: 22mm. EFES-28: 28mm. EFES-L-28: 28mm. EFES-35: 35mm. EFES-42: 42mm. EFES-54: 54mm. EFES-67: 67mm. EFES-76: 76mm. EFES-108: 108mm. EFES-133: 133mm. EFES-159: 159mm. 45° Street Elbow: EFES/45-8: 8mm. EFES/45-10: 10 mm. EFES/45-15: 15mm. EFES/45-18: 18mm. EFES/45-22: 22mm. EFES/45-28: 28mm. EFES/45-35: 35mm. EFES/45-42: 42mm. EFES/45-54: 54mm. EFES/45-133: 133mm. EFES/45-159: 159mm. Equal Tee: EFET-06: 6mm. EFET-08: 8mm. EFET-10: 10mm. EFET-12: 12mm. EFET-15: 15mm. EFET-L-15: 15mm. EFET-18: 18mm. EFET-22: 22mm. EFET-L-22: 22mm. EFET-28: 28mm. EFET-L-28: 28mm. EFET-35: 35mm. EFET-42: 42mm. EFET-54: 54mm. EFET-67: 67mm. EFET-76: 76mm. EFET-108: 108mm. EFET-133: 133mm. EFET-159: 159mm. Reducing Tee: EFRT-101015: 10x10x15mm. EFRT-151010: 15x10x10mm. EFRT-151015: 15x10x15mm. EFRT-151508: 15x15x08mm. EFRT-151510: 15x15x10mm. EFRT-151512: 15x15x12mm. EFRT-151522: 15x15x22mm. EFRT-221515: 22x15x15mm. EFRT-221522: 22x15x22mm. EFRT-L-221522: 22x15x22mm. EFRT-222210: 22x22x10mm. EFRT-222215: 22x22x15mm. EFRT-L-222215: 22x22x15mm. EFRT-222228: 22x22x28mm. EFRT-281515: 28x15x15mm. EFRT-281522: 28x15x22mm. EFRT-281528: 28x15x28mm. EFRT-282215: 28x22x15mm. EFRT-282222: 28x22x22mm. EFRT-282228: 28x22x28mm. EFRT-282815: 28x28x15mm. EFRT-282822: 28x28x22mm. EFRT-282835: 28x28x35mm. EFRT-352222: 35x22x22mm. EFRT-352235: 35x22x35mm. EFRT-352822: 35x28x22mm. EFRT-352828: 35x28x28mm. EFRT-352835: 35x28x35mm. EFRT-353515: 35x35x15mm. EFRT-353522: 35x35x22mm. EFRT-353528: 35x35x28mm. EFRT-422828: 42x28x28mm. EFRT-422842: 42x28x42mm. EFRT-423535: 42x35x35mm. EFRT-423542: 42x35x42mm. EFRT-424215: 42x42x15mm. EFRT-424222: 42x42x22mm. EFRT-424228: 42x42x28mm. EFRT-424235: 42x42x35mm. EFRT-544254: 54x42x54mm. EFRT-545415: 54x54x15mm. EFRT-545422: 54x54x22mm. EFRT-545428: 54x54x28mm. EFRT-545435: 54x54x35mm. EFRT-545442: 54x54x42mm. EFRT-675467: 67x54x67mm. EFRT-676728: 67x67x28mm. EFRT-676735: 67x67x35mm. EFRT-676742: 67x67x42mm. EFRT-676754: 67x67x54mm. EFRT-767628: 76x76x28mm. EFRT-767635: 76x76x35mm. EFRT-767642: 76x76x42mm. EFRT-767654: 76x76x54mm. EFRT-767667: 76x76x67mm. EFRT-10810854: 108x108x54mm. EFRT-10810867: 108x108x67mm. EFRT-10810876: 108x108x76mm. EFRT-13313354: 133x133x54mm. EFRT-133133108: 133x133x108mm. EFRT-15915954: 159x159x54mm. EFRT-159159133: 159x159x133mm. Full crossover: EFFCO-10: 10 mm. EFFCO-12: 12 mm. EFFCO-15: 15 mm. EFFCO-18: 18mm. EFFCO-22: 22 mm. EFFCO-28: 28mm. Partial Crossover: EFPCO-10: 10mm. EFPCO-15: 15mm. EFPCO-18: 18mm. EFPCO-22: 22mm. End cap: EFEC-08: 8mm. EFEC-10: 10mm. EFEC-15: 15mm. EFEC-18: 18mm. EFEC-22: 22mm. EFEC-28: 28mm. EFEC-35: 35mm. EFEC-42: 42mm. EFEC-54: 54mm. EFEC-67: 67mm. EFEC-76: 76mm. EFEC-108: 108mm. EFEC-133: 133mm. EFEC-159: 159mm. Imp coupler: EFCOI-15: 15mm x 1/2”. EFCOI-15: 15mm x 3/4”. EFCOI-22: 22mm x 3/4”. EFCOI-28: 28mm x 1”. EFCOI-35: 35mm x 1 1/4”. EFCOI-42: 42mm x 1 1/2”. EFCOI-54: 54mm x 1 3/4”. EFCOI-67: 67mm x 2”. EFCOI-76: 76mm x 3”. EFCOI-108: 108mm x 4”. Male Adapter: EFMA-15 1/4: 15mm x 1/4”. EFMA-15 3/8: 15mm x 3/8”. EFMA-15 2/1: 15mm x 1/2”. EFMA-15 3/4: 15mm x 3/4”. EFMA-22 3/4: 22mm x 3/4”. EFMA-22 1: 22mm x 1”. EFMA-28 1: 28mm x 1”. EFMA-35 1 1/4: 35mm x 1 1/4”. EFMA-42 1 1/2: 42mm x 1 1/2”. EFMA-54 2: 54mm x 2”. EFMA-67 2 1/2: 67mm x 2 1/2”. EFMA-76 3: 76mm x 3”. Female Adapter: EFFA-15 1/4: 15mm x 1/4”. EFFA-15 3/8: 15mm x 3/8”. EFFA-15 1/2: 15mm x 1/2”. EFFA-22 3/4: 22mm x 3/4”. EFFA-28 1: 28mm x 1”. EFFA-35 1 1/4: 35mm x 1 1/4”. EFFA-42 1 1/2: 42mm x 1 1/2”. EFFA-54 2: 54mm x 2”. Straight Tap connector: EFSTC-15 1/2: 15mm x 1/2”. EFSTC-15 3/4: 15mm x 3/4”. EFSTC-22 3/4: 22mm x 3/4”. EFSTC-28 1: 28mm x 1”. EFSTC-22 1: 22mm x 1”. Bent tap connector: EFBTC-15 1/2: 15mm x 1/2”. EFBTC-15 3/4: 15mm x 3/4”. EFBTC-22 3/4: 22mm x 3/4”. EFBTC-28 1: 28mm. x1”. EFBTC-22 1: 22mm x 1”. Straight Tap connector (With Gasket): EFSCU-15 1/2: 15mm x 1/2”. EFSCU-15 3/4: 15mm x 3/4”. EFSCU-22 3/4: 22mm x 3/4”. EFSCU-22 1: 22mm x 1”. EFSCU-28 1: 28mm x 1”. Bent tap connector (with Gasket): EFBCU-15 1/2: 15mm x 1/2”. EFBCU-15 3/4: 15mm x 3/4”. EFBCU-22 3/4: 22mm x 3/4”. EFBCU-22 1: 22mm x 1”. EFBCU-28 1: 28mm x 1”. Straight cylinder union: EFSCC-151/2: 15mm x 1/2”. EFSCC-153/4: 15mm x 3/4”. EFSCC-223/4: 22mm x 3/4”. EFSCC-221: 22mm x 1”. EFSCC-281: 28mm x 1”. Models added April 2021: Fitting Reducer: EFFR-L-1510, 15-10mm EFFR-L-2822, 28-22mm 45° Elbow: EFE/45-133, 133mm End cap: EFEC-L-15, 15mm EFEC-L-22, 22mm

Approval Holder:

Ningbo Jintian Copper Tube Co Ltd

Company Name

Ningbo Jintian Copper Tube Co Ltd

Address

No.1 ChengXi West Road, CiCheng, NingBo

Country

China

Phone

0086 574 8757 4425

General Email

audrey@jtcorp.com.cn

View All Listings by this Company

Range of gas fired water heaters incorporating stainless steel strainers on the inlets. Maximum working pressure 10.0 Bar Maximum working temperature 85˚C

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

2012003

Size:

1/2" BSP (M) inlet and outlets

Marking:

VANWARD on front of heater, VANWARD model and technical info on adhesive label on side of heater.

Installation Requirements:

R001 R140

Expiry date:

31/12/2025

Model:

JSQ*FT-X** JSQ: mechanical exhaust gas water heater; *: Capacity(L); X**: appearance style (X11, X12, X13, X14) JSQ10FT-X11 JSQ10FT-X12 JSQ10FT-X13 JSQ10FT-X14 JSQ11FT-X11 JSQ11FT-X12 JSQ11FT-X13 JSQ11FT-X14 JSQ12FT-X11 JSQ12FT-X12 JSQ12FT-X13 JSQ12FT-X14 JSQ14FT-X11 JSQ14FT-X12 JSQ14FT-X13 JSQ14FT-X14 JSQ16FT-X11 JSQ16FT-X12 JSQ16FT-X13 JSQ16FT-X14 JSQ17FT-X11 JSQ17FT-X12 JSQ17FT-X13 JSQ17FT-X14 JSG*FT-X** JSG: Balanced gas water heater; *: Capacity(L); X**: appearance style (X11, X12, X13, X14) JSG10FT-X11 JSG10FT-X12 JSG10FT-X13 JSG10FT-X14 JSG11FT-X11 JSG11FT-X12 JSG11FT-X13 JSG11FT-X14 JSG12FT-X11 JSG12FT-X12 JSG12FT-X13 JSG12FT-X14 JSG14FT-X11 JSG14FT-X12 JSG14FT-X13 JSG14FT-X14 JSG16FT-X11 JSG16FT-X12 JSG16FT-X13 JSG16FT-X14 JSG17FT-X11 JSG17FT-X12 JSG17FT-X13 JSG17FT-X14

Product Images

Approval Holder:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Manufacturer:

Guangdong Vanward New Electric Co. Ltd.

Company Name

Guangdong Vanward New Electric Co. Ltd.

Address

13 Jianye Mid- Road Shunde High Tech Industry Development Zone

Country

Ronggui Shunde

View All Listings by this Company

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system, incorporating a pressure relief valve set at 3.0 bar and expansion vessel on the primary circuit. The inlet of the replenishing valve between the primary and secondary circuits incorporate a plastic strainer. Maximum working pressure 2.5 bar (primary) and 6.0 bar (secondary). Maximum operating temperature 85˚C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2012051

Note:

Please note that the inlet pipework connects to the flow sensor, no fittings or valves prior to this are supplied. Not supplied with a temporary filling loop. A filling loop must be installed with the appropriate backflow prevention device in accordance with Schedule 2 paragraph 7 of the Water Supply (Water Fittings) Regulations 1999.

Size:

½” BSP (M) inlet and outlet Secondary Circuit. ½” BSP (M) replenishing valve. ¾” BSP(M) inlet and outlet primary circuit.

Marking:

Strom on front of body. Model and technical info on adhesive label on side of body.

Installation Requirements:

R001 R140 R360

Expiry date:

31/12/2025

Model:

Strom E range comprising of models: SBSP7C, SBSP11C & SBSP15C. SBTP18C, SBTP21C & SBTP24C. The number in model indicates kW rating.

Approval Holder:

STROM LTD

Company Name

STROM LTD

View All Listings by this Company

Quick connector for connecting mixed water outlets to flexible hoses. Maximum operating temperature 60°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2010369

Note:

Open outlet use only.

Size:

10.19mm x ID quick connector.

Marking:

Neoperl logo (‘Neoperl’ within an oval), flow arrow and part code on body.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Assembly Connector DCQC black black: 35.8300.001

Product Images

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Range of pump docking manifolds with plastic bodies and NBR, EPDM and FKM ‘O’-rings. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

See model

Marking:

DAB water technology on plate attached to body.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

60147247 E.SYDOCK - GAS: 1¼” BSP (F). 60150514 E.SYDOCK - NPT: 1¼” NPT (F). 60160491 E.SYTWIN - GAS: 1¼” BSP (F). 60162081 E.SYTWIN - NPT: 1¼” NPT (F).

Product Images

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Range of flow sensors with brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C

Section:

1530 Miscellaneous Fittings

Size:

¾” BSP (M).

Marking:

Sika, part number and other information on adhesive label on cable. Flow arrow on body

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

Flow sensors type series VTY15 Models: VY1545abcdefgh ab:for body material (MA = Brass CW617N-DW, MK = Brass CW724R, K5 = without body, only the internal turbine system) cd: for sensor and signal output (HN = Hall sensor-NPN, 00 = without sensor) ef: for electrical cable connection (various - in combination can be 00…99 or AA…ZZ, examples 05 = 500mm, 12=1200mm, X1=80mm with Molex plug connector) gh: for process connection (A4 = G3/4 male thread, YY = without, only possible with ab = K5) VY1545abyyyyyzz ab: for body material (MA = Brass CW617N-DW, MK = Brass CW724R, K5 = without body, only the internal turbine system) yyyyy: for name of customer (5 digits, e.g. SCHMI, MUELL, …) zz: for consecutive number (2 digits, 01…99)

Product Images

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Manufacturer:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of isolation valves incorporating brass bodies and EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2012053

Size:

SEE MODEL

Marking:

Delabie on valve body (855755). Delabie on washer (855755UK).

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

855755 Eccentric coupling STOP CHECK ½” BSP (M) x ¾” BSP (M) Offset Union 855755UK In-line STOP CHECK ½” BSP (M) x ¾” BSP (M)

Product Images

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Dutypoint ‘VS’ range of cold water supply booster sets, incorporating 2 to 8 pumps with a modular stainless steel manifold system. The booster sets also incorporate spherical valves, non-return valves, pressure switches/sensors and expansion vessels.. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011357

Size:

DN80 flanged inlet/outlet.

Marking:

Dutypoint logo, model no, serial no, company address and other technical information on control box.

Expiry date:

30/11/2025

Model:

VS(i)-(ii)-(iii)(iv)(v) VS = Product range prefix (i) = Number of pumps: 2, 3, 4, 6 or 8 (6 and 8 pump variants will be 2 x 3 pump units or 2 x 4 pump units coupled together). (ii) = Pump Model (4 digits): 3040, 3060, 3080, 3100, 5040, 5060, 5080, 5100, 9040, 9060, 9070 & 9090. (iii) Motor kW size (multiplied by 10): 005, 007, 011, 015, 022, 030. (iv) Power supply type: M (single phase) or T (three phase). Model code example: VS4-9090-030T.

Product Images

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Manufacturer:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company