Methven UK Limited Approvals


#2007801

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0510 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout.
WRAS Approval Number:
2007801
Size:
¾” BSP (M)
Marking:
DTC (brand of Methven) on rear of body
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2025
Model:
BRBFCPUK. ELAN108. Model added July 2020: CABFCPUK

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2003806

Range of brass bodied shower outlets (various finishes) comprising of a wall union, shower fixing bracket and a wall elbow. Model WEPB Incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working temperature 65°C.

Section:
0681 Combination Tap Assemblies
Section Subtitle:
Miscellaneous.
WRAS Approval Number:
2003806
Size:
See model
Marking:
DTC (brand of Methven, followed by two digit internal code) on body.
Installation Requirements:
R001
Expiry date:
31/03/2025
Model:
RLE35, SPE11 & SPE11M - ¾” BSP (M). SPE11SQ: 15mm compression. METHSQELB, SPE01, SPE01/G, SPE03 & WEPB: ½” BSP (M). Models added March 2020: D50010009 - ¾” BSP (M) D50010015 - ½” BSP (M) D50010022 - ¾” BSP (M) Models added December 2020: METHSQELBBK - Matte black METHSQELBBB - Brushed brass METHSQELBGM - Gun metal METHSQELBBN - Brushed nickel Models added April 2021: WEPBBB – Brushed brass WEPBBK – Matte black WEPBBN – Brushed nickel WEPBGM - Gunmetal Model added March 2024: SPE01BK - Matte black

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2003349

Range of concealed thermostatic blending valves having brass bodies and NBR ‘O’-rings, incorporating a ceramic cartridge headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge with a various operating members. Both inlets incorporate a single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection), plastic filters and flow regulators. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2003349
Size:
15mm compression
Marking:
DTC01 on body. Methven logo on faceplate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2025
Model:
KIRI 2VDIV KIRI 2VDIVA 2OBCV KAHA 2VDIV KAHA 2VDIVA KAHA 2VDIVAEX KAHA 2VDIVBK TU2VDIVSS AIO 2VDIV AIO 2VDIVABK

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2003380

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003380
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Deva (brand of Methven) on operating member. DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2025
Model:
INS313, EXG5073, WYE313.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006806

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headwork with either cross top, single lever or dome type operating members. The DLT SPEC103 model is supplied with metal backnuts. All other models are supplied with plastic backnuts. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2006806
Size:
½” BSP (M)
Marking:
DTC 34 (brand of Methven) on body
Installation Requirements:
R001 R006
Expiry date:
30/06/2025
Model:
DLT103, DLT SPEC103, KEE DLT103, KEE DLT103-4, VW DLT103, 208.0574.211, DLV103, CNTL03, KEE CNTL03 & 60177003.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004306

Range of pillar taps with brass bodies (chrome plated or gold effect finish /501 model), incorporating rising spindle headworks with cross top operating members. The products are supplied with plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004306
Size:
½” BSP (M)
Marking:
DTC (brand of Methven) on rear of body
Installation Requirements:
R001 R006
Expiry date:
30/04/2025
Model:
CR19 & CR19/501

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004329

Range of deck mounted two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlets incorporate a plastic flow straightener (BRBSMCPUK model) or a plastic aerator (AOBSMCPUK model). The products are supplied with metal backnuts. The shower hose incorporates a stainless steel strainer and the shower handset inlet incorporates a plastic flow restrictor. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2004329
Size:
¾” BSP (M)
Marking:
Methven logo on body and operating member.
Installation Requirements:
R001 R006 R030
Expiry date:
30/04/2025
Model:
BRBSMCPUK & AOBSMCPUK Model added June 2020: CABSMCPUK

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004357

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic aerator. The KEBPUWCPUK model is supplied with a pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004357
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Methven on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
KEBCPUK, ZH KEBCPUK & KEBPUWCPUK COMBINATION TAP ASSEMBLIES

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004324

Range of basin pillar taps (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout outlets incorporate a plastic flow straightener. The products are supplied with metal or plastic back nuts (depending on model). Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2004324
Size:
½” BSP (M)
Marking:
DTC 34 (brand of Methven) on rear of body
Installation Requirements:
R001 R005
Expiry date:
30/04/2025
Model:
CNTL01 (plastic backnuts), EXG5051 (plastic backnuts), DLT101 (plastic backnuts), DLT SPEC101 (brass backnuts), 208.0574.186 (plastic backnuts), DLV101 (plastic backnuts), KEE DLT101 (brass backnuts), KEE DLT101-4 (plastic backnuts), VW DLT101 (brass backnuts), DLT SPEC101PC (brass backnuts) & SF2401CP (brass backnuts). Model added June 2022: DLTSPEC101-4

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004330

Range of shower handsets and shower kits (see model) with plastic bodies (various finishes, see model). The inlet incorporates a plastic flow restrictor. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2004330
Size:
½” BSP (M)
Marking:
Methven on handset
Installation Requirements:
R001 R040
Expiry date:
30/04/2025
Model:
All models are chrome plated unless stated: Shower kit: AOSRCPUK, AOSRCPWHUK (White), AOSRBK (Matte black) & EKIT06/AIO. Shower handset and wall outlet bracket: AOWOBCPUK, AOWOBCPWHUK (Chrome/White) & AOWOBBK (Matte black). Shower handset: AOHSCPUK, AOHSCPWHUK (White), AOHSBK (Matte black). Shower handset and hose: AOHSCPUK HSE Model 48212 Added 13/06/2023

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004336

Two hole, single outlet (fixed) combination tap assembly with brass bodies (various finishes) incorporating quarter turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to a shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset and metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2004336
Size:
¾” BSP (M)
Marking:
Methven on body Marking from November 2020: DTC53 (brand of Methven) on rear of body. Methven on left leg.
Installation Requirements:
R001 R006 R030
Expiry date:
30/04/2025
Model:
WAIBSMCPUK From November 2020 the following new finishes have been added: WAIBSMCPUK: WAIBSMBB - Brushed Brass WAIBSMBK - Matte Black WAIBSMBN - Brushed Nickel WAIBSMGM - Gunmetal

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004343

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004343
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Deva (brand of Methven) on operating member. DTC (brand of Methven) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
INS113, EXG5072, STL113 & WYE113

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006807

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Each hose inlet incorporates an EPDM seal with a stainless steel mesh filter. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006807
Size:
Stainless steel braided TPSiV lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Methven on operating member. DTC15 (brand of Methven) on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/06/2025
Model:
AOBCPUK (chrome), AOBBKUK (matte black), AOBMCPUK (chrome), KEBMCPUK (chrome), BRBCPUK (chrome), BRBWBK (matte black) & BRBBKUK (matte black). Model added June 2020: CABCPUK

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004312

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies (chrome plated or gold effect finish /501 model) incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004312
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP end connections.
Marking:
DTC 32A (brand of Methven) on body. Deva on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
ADORE113, ADORE113/501, NIL113, MCL113, LACE113 EXG5063, RVL113, ADORE313, ADORE313C, NIL313, LACE313 & MH ADORE313. Model added May 2023: T-ADORE313

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2003382

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2003382
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC ON REAR OF TAP DEVA ON FRONT OF TAP
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2025
Model:
SENSOR6/BT COMBINATION TAP ASSEMBLIES

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004342

Coin type wastes with chromium plated brass body and rubber seal. Supplied with a plastic backnut.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2004342
Size:
1 ¼” BSP (M)
Marking:
DTC32 (brand of Methven) on bottom of plug (models PTW300/017 & D50010005) DTC32 on side of coin (models FTW300/017 & D50010003)
Installation Requirements:
R001
Expiry date:
30/04/2025
Model:
FTW300/017, D50010003, PTW300/017 & D50010005.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2005026

Range of shower handsets in chromium plated brass on model MH1 or chromium plated ABS on model MH1A. Model MH2 is supplied with an approved flow regulator. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2005026
Size:
½” BSP (M)
Marking:
METHVEN on body
Installation Requirements:
R001 R040
Expiry date:
31/05/2025
Model:
MH1 MH1A MHSCP Model added November 2021: MH2BB MH2BK MH2BN MH2CP MH2GM

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2005313

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks, and various operating members. The spout outlet incorporates a plastic flow straightener. Fittings are supplied with either brass or plastic backnuts depending on model. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2005313
Size:
¾” BSP (M)
Marking:
DTC on rear of body.
Installation Requirements:
R001 R040
Expiry date:
31/05/2025
Model:
CNTL02 EXG5052 DLT102 DLV102 DLT SPEC102 (brass backnuts) KEE DLT102 (brass backnuts) VW DLT102 (brass backnuts)

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006809

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) with a solenoid valve controlling the flow and activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum working temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006809
Size:
Stainless steel braided EPDM lined hose assembly with ½” captive nut end connections.
Marking:
Deva on front of body. DTC28 on rear of body.
Installation Requirements:
R001 R006 r010
Expiry date:
30/06/2025
Model:
SENSOR1/D, SENSOR2/D, SENSOR3/D

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2005348

Range of single hole, single outlet (swivel) combination tap assembles with brass bodies (various finishes), incorporating a non-rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005348
Size:
15mm copper tails
Marking:
DTC34 (Methven logo) on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2025
Model:
Models with dome type operating members: DCM104 DCP124/004 DCP124/005 Models with cross top operating members: MILAN104 VW MILAN104 WM MILAN104

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2005356

Range of basin pillar taps (chromium plated brass or gold effect finish /501 model) with rising spindle headworks and cross top operating members. The spout outlet incorporates a plastic flow straightener. The products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2005356
Size:
½” BSP (M).
Marking:
DTC 34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006
Expiry date:
31/05/2025
Model:
Coronation range - high neck sink taps: CR27A & CR27A/501.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006810

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass bodies, except for /501 suffix model which is gold plated), incorporating quarter turn ceramic disc headworks or a ceramic cartridge headwork (ELAN113 & DAR113 models only), all with single lever operating members, except GE04 models which have cross top operating members. The spout outlet incorporates a plastic flow straightener, except the DAR113 model which has a plastic aerator. The DLT113 models are supplied with a pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006810
Size:
DAR113 model: Stainless steel braided PEX lined flexible hose aseemblies incorporating ½” captive nut end connections. All other models: 15mm copper tails
Marking:
ELAN113 model: DTC34 (brand of Methven) on body. Deva logo on operating member. DAR113 model: DTC53 (brand of Methven) on body. All other models: DTC34 (brand of Methven) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
GE04, GE04/501, ELAN113, DLT113, DLT113BW, VW DLT113, DAR113.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2004359

Range of single hole, single outlet (fixed) combination tap assemblies with brass bodies incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2004359
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP end connections.
Marking:
DTC 32A (brand of Methven) on body. Deva on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/04/2025
Model:
DT1

Approval Holder:
COMMERCIALWARE LTD
Company Name
COMMERCIALWARE LTD
Postcode
PR8 6NA

View All Listings by this Company
Manufacturer:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602

View All Listings by this Company

Print This Approval


#2005908

Shower kit consisting of a shower handset (matt black or chrome plated plastic), riser rail and PVC lined multi-layered shower hose with brass connections, EPDM 'O'-rings and strainer. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2005908
Size:
1/2" BSP (F) conical or captive nut
Marking:
Methven on shower handset
Installation Requirements:
R001 R040
Expiry date:
31/05/2025
Model:
KMKIT & KMKITBK

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006325

Range of pillar taps with brass bodies (chromium plated or gold effect finish), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporates a plastic flow straightener and the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2006325
Size:
½” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body (GE 01 & GE01/501 models). DTC34 (brand of Methven) on rear of body & DEVA on operating member (RVL101 model).
Installation Requirements:
R001 R006
Expiry date:
30/06/2025
Model:
Georgian basin tap: GE 01 GE01/501 Revelle basin tap: RVL101

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006326

Pillar tap with brass body (chromium plated or gold effect finish), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporates a plastic flow straightener and the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2006326
Size:
½” BSP (M)
Marking:
DTC3A (brand of Methven) on rear of body. DEVA on operating member.
Installation Requirements:
R001 R005
Expiry date:
30/06/2025
Model:
ELAN101

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006327

Range of shower hoses incorporating a PVC inner liner with corrugated metal outer casing, EPDM washers and stainless steel strainer. Maximum operating temperature 60°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2006327
Size:
½” BSP (F) captive nut
Marking:
DTC15 (brand of Methven), WRAS and date of manufacture (YY) on ferrule.
Installation Requirements:
R001 R040
Expiry date:
30/06/2025
Model:
HOS1.75CPS02 D50010011

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006328

Range of single hole, double outlet (swivel) combination tap assemblies with brass bodies (various finishes) incorporating a quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operaring temperature 60°C.

Section:
0490 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a double outlet and a swivel spout.
WRAS Approval Number:
2006328
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections or 15mm copper tails.
Marking:
DEVA on operating member. DTC34 (Brand of Methven) on rear of body.
Installation Requirements:
R001 R006
Expiry date:
30/06/2025
Model:
Puffin model: PUF130/CP ONTAR130 SHD130 Sauris model: SMS172 SMS172/004 SMS172/005 KEE SMS172 SMS172/BC SMS172F 320892

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006346

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006346
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC32A (brand of Methven) on rear of body. Deva on front of body
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
LEV104 HUR104 LEV104/BC STL104 VW LEV104 Model added September 2023: FARO104

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006347

Range of pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. Spout outlets incorporate a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2006347
Size:
½” BSP (M)
Marking:
DTC32A (brand of Methven) on rear of body (model EDR01/CP) DTC32A (brand of Methven) on rear of body & DEVA on operating member (models ADORE101, ADORE101/501, LACE101, EXG5060)
Installation Requirements:
R001 R006
Expiry date:
30/06/2025
Model:
ADORE101 ADORE101/501 LACE101 EXG5060 EDR01/CP

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006357

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (chromium plated), incorporating ceramic cartridge headworks and single lever operating member. The connection to flexible hose and spray outlets incorporates an approved single check valve cartridge (however, the whole product has not been fully tested to demonstrate that it provides adequate backflow protection) the outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006357
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC25 (brand of Methven) on rear of body. Deva on front of body.
Installation Requirements:
R001 R006 R009 r010
Expiry date:
30/06/2025
Model:
MDL104

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006362

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes) incorporating a ¼ turn ceramic disc headwork supplied with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006362
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections or 15mm copper tails.
Marking:
DEVA on operating member. DTC34 (Brand of Methven) on rear of body.
Installation Requirements:
R001 R006 r010
Expiry date:
30/06/2025
Model:
Vision model: VSN104 VSN104F 320891

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2005318

Range of shower outlets with chromium plated metal or plastic bodies some models include a shower hose. Inlets incorporate a stainless steel strainer and flow restrictors. SJK23 incorporates a stainless-steel anti-tamper device at the inlet. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2005318
Size:
See model
Marking:
Methven on operating member (models SJK23-LF & SJK23-LF HSE) Methven on operating member & Satin Jet on face cap (models KRLFHSCP, SJK23, SJK23B HSE & SJK23B) Satin Jet on face cap (models SJK002, SJK009, OSQ23OCP, SJK005-LF & SJK005) Methven on face plate (model KRLFWSCP) Methven on body (models KRLFHSBK, KRLFHSGM, KRLFHSBB & KRLFHSBN)
Installation Requirements:
R001 R040
Expiry date:
31/05/2025
Model:
SJK 002 - ½” BSP (M) SJK005 - ½” BSP (F) SJK005-LF - ½” BSP (F) SJK23 - ½” BSP (M) SJK23-LF - ½” BSP (M) SJK23LF HSE - ½” BSP (F) SJK23B - ½” BSP (M) SJK23B HSE - ½” BSP (F) SJK 009 - ½” BSP (F) OSQ230CP - ½” BSP (F) KRLFHSCP - ½” BSP (M) KRLFWSCP - ½” BSP (F) Models added December 2020: KRLFHSBK - ½” BSP (M) Matte black KRLFHSGM - ½” BSP (M) Gun metal KRLFHSBB - ½” BSP (M) Brushed brass KRLFHSBN - ½” BSP (M) Brushed nickel ECO01 -1/2" BSP (M) Added 07/06/2023

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2005319

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ceramic cartridge headwork, and single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2005319
Size:
Stainless steel braided, EPDM lined hose assembly with ½” captive nut (Models VSN113/EX, RUB113 & VSN113F) 15mm copper tails (Models ELAN313 & VSN113)
Marking:
Deva on operating member. DTC34 on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/05/2025
Model:
ELAN313 VSN113 VSN113/EX VSN113F RUB113

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006075

Single hole, single outlet combination tap assembly (chromium plated brass) incorporating a sequential headworks with single lever operating member to control both the flow and temperature. The outlet incorporates a plastic flow straightener. The product also incorporates a single check valve assembly (verified by test as suitable for backflow protection against Fluid Category 2). Maximum working pressure 10.0 bar. Maximum operating temperature 60ºC.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2006075
Size:
Stainless steel braided, EPDM lined flexible hose assemblies with a ½” BSP (F) captive nut end connection with a ½” BSP (M) to 15mm compression adaptor.
Marking:
DEVA ON OPERATING MEMBER DTC10 ON BODY
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
SOL003

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006323

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating ceramic cartridge headwork with single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with a click waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a fixed spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2006323
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC32A (brand of Methven) on body. DEVA on operating member.
Installation Requirements:
R001 R006 R010
Expiry date:
30/06/2025
Model:
ADORE113/EK

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007302

Range of pillar taps with brass bodies (various finishes), incorporating quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporate plastic flow straighteners and the products are supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2007302
Size:
¾” BSP (M)
Marking:
DTC32A (Brand of Methven) on rear of body. Deva on operating member.
Installation Requirements:
R001 R005
Expiry date:
31/07/2025
Model:
ADORE102 ADORE102/501 LACE102 EXG5061 EDR02/CP
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007314

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating ceramic cartridge headworks and single lever operating member. The flexible spout outlet incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2007314
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections
Marking:
DTC25 on rear of body. DEVA on front of the body.
Installation Requirements:
R001 R090
Expiry date:
31/07/2025
Model:
BDG104 – Bridgewater Flexi sink mixer.
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007321

Two hole, single outlet (fixed) combination tap assembly with brass body (various finishes). Incorporating quarter turn ceramic disc headworks with single lever, dome or cross top operating members and self canceling diverter to shower outlet. The spout outlets incorporate plastic flow straighteners. This approval includes a hose, handset and wall bracket and the products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2007321
Size:
¾” BSP (M)
Marking:
DTC53 (brand of Methven) on rear of body.
Installation Requirements:
R001 R005 R030
Expiry date:
31/07/2025
Model:
DAR106
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007336

Range of bath pillar taps with brass bodies (various finishes). Incorporating a non-rising spindle headworks with various operating members. The spout outlets incorporates a plastic flow straightener. The product is supplied with either metal or plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2007336
Size:
¾” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R040
Expiry date:
31/07/2025
Model:
DCM102 DCM102/501 DCM SPEC102 MILAN 102 MILAN SPEC102 KEE MILAN102 EBT13102 SOLE102 D50010020 TUD02 TUD02/501 EBT2002 EBT2002501 All models are supplied with plastic backnuts excluding models: DCM SPEC102, MILAN SPEC102, KEE MILAN102
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2011802

Range of two hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating ceramic disc headworks, single lever operating members and self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose, shower handset and plastic back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0530 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a self-cancelling diverter to a shower outlet.
WRAS Approval Number:
2011802
Size:
¾” BSP (M)
Marking:
DTC32A (brand of Methven) on rear of body. Deva on operating member.
Installation Requirements:
R001 R005 R030
Expiry date:
30/11/2025
Model:
ADORE106 ADORE106/501 MCL106 NIL106 LACE106 ELAN106/DM

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2012801

Range of two hole, single outlet (fixed) combination tap assemblies (various finishes). Incorporating quarter turn ceramic disc headworks with single lever, dome or cross top operating members and manual diverters to shower outlets. The spout outlets incorporate plastic flow straighteners. This approval includes a hose, handset and wall bracket and the products are supplied with plastic backnuts. Maximum working pressure 6.0 bar. Maximum operating temperature 60°C.

Section:
0520 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a fixed spout, incorporating a manually operated diverter to a shower outlet.
WRAS Approval Number:
2012801
Size:
¾” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R020
Expiry date:
31/12/2025
Model:
INS106 EXG5070 STL106 WYE106 MH INS106 MOT106

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007340

Range of basin pillar taps with brass bodies (various finishes). Incorporating a non-rising spindle headworks with various operating members. Spout outlets incorporate a plastic flow straightener. Products are supplied with either plastic or metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2007340
Size:
½” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R005
Expiry date:
31/07/2025
Model:
D50010006 D50010030 DCM SPEC101 DCM101 DCM101/501 EBT13101 EBT2001 EBT2001501 KEE MILAN101 MILAN 101 MILAN SPEC101 MILAN101/FR101-4 SOLE101 TUD01 TUD01/501 VW MILAN101
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2007915

Range of shower kits consisting of a wall mounted thermostatic shower mixer with brass bodies (various finishes) incorporating a ceramic disc headworks controlling the flow, temperature is controlled via a thermostatic cartridge and single lever operating members. Supplied with a shower hose, shower handset, riser rail and soap dish. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2007915
Size:
15mm compression inlets.
Marking:
Methven on shower handset. Methven & DTC34 (Brand of Methven) on body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2025
Model:
AOCTSCPUK AOCTSCPWHUK AOCTSEFCP

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2006318

Range of pillar taps with brass bodies (chromium plated or gold effect finish), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporates a plastic flow straightener and the product is supplied with plastic backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
1800 Taps
Section Subtitle:
Pillar tap.
WRAS Approval Number:
2006318
Size:
See model
Marking:
DTC34 (Brand of Methven) on rear of body for GE02 & GE02/501 DTC34 (Brand of Methven) & DEVA on rear of body for RVL102
Installation Requirements:
R001 R005
Expiry date:
30/06/2025
Model:
Revel basin tap: RVL102 ½” BSP (M). Georgian bath tap: GE02 ¾” BSP (M), GE02/501 ¾” BSP (M).

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2003083

Range of T-type thermostatic blending valves with chromium plated brass bodies. The inlets incorporate a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve with thermostatic temperature control
WRAS Approval Number:
2003083
Size:
See model.
Marking:
DTC 58, MODEL & flow arrow on body
Installation Requirements:
R001 R010 R040 R120
Expiry date:
31/03/2025
Model:
TBV008 – 15mm compression inlet/outlet. TBV010 – 22mm compression inlet/outlet.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2003387

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2003387
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections.
Marking:
DTC & DEVA on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/03/2025
Model:
SENSOR7/D

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2009907

Shower kit consisting of a shower handset (chrome plated plastic), riser rail and PVC lined multi-layered shower hose with brass connections, EPDM 'O'-rings and washers. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower heads and shower handsets
WRAS Approval Number:
2009907
Size:
¾” BSP(F) captive nut
Marking:
Methven & Satinjet (brand of Methven) on shower handset.
Installation Requirements:
R001 R040
Expiry date:
30/09/2025
Model:
WK1 MK1 EKIT04/M KK1 K1MSK EKIT05/K EKIT10/KLF KK1-LF
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2009303

Range of two hole, singleoutlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non rising spindle headworks with various operating members. The spout outlets incorporate a plastic flow straightener. Products are supplied with plastic backnuts, model DCM SPEC105 is supplied with metal backnuts Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0550 Combination Tap Assemblies
Section Subtitle:
Two hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009303
Size:
½” BSP (M)
Marking:
DTC34 (brand of Methven) on rear of body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2025
Model:
187X DCM105 VW DCM105 208.0574.212 DCM SPEC105 MILAN 105
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2009306

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate a plastic flow straightener . Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap with a single outlet and a swivel spout. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2009306
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” captive nut end connections or 15mm copper tails.
Marking:
Deva (brand of Methven) or Methven on operating member. DTC32A (brand of Methven) on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/09/2025
Model:
ADORE171 ADORE171/FR113-8 ERIE171 MCL171 ADORE171M ADORE171F LACE171 SMS171 ECO-5 MH ADORE171 Model added November 2021: WWB-LACE171 Models added November 2022: DORCP SW1
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 6

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.