PPI Xiamen Industry Co Ltd Approvals


WRAS Approval Number: 1705007

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705007
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: XZ on rear of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    167019, 167019A, 167019B, 167022
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705008

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705008
  • Expiry date: 31/05/2022
  • Size: ½" BSP (M)
  • Marking: XZ on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    167023
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705009

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating a non-rising spindle headworks and dome type (Models: 167020 & 167020WH) or cross top (Models: 167020F, 167020G & 167020A) operating members. The inlets incorporate a stainless steel strainer. The spout outlet incorporates a plastic flow straightener or plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705009
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: XZ on rear of body
  • Installation Requirements R001 R006 R009 R010
  • Model
    167020, 167020WH, 167020F & 167020G Model added September 2020 167020A
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705010

Range of deck mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non-rising spindle headworks and dome type (Model 167021) or cross top (Models 167021F & 167021G) operating members. The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705010
  • Expiry date: 31/05/2022
  • Size: ½” BSP (M)
  • Marking: XZ on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    167021, 167021F & 167021G
  • Factor: Xiamen Zhongyu Hardware Industry Co Ltd
    Company Name
    Xiamen Zhongyu Hardware Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District
    Postcode
    361022
    Phone
    0592-6809188
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705081

Range of single hole, single outlet (swivel) combination tap assembly (Chromium plated brass or white finish - 167020WH model). Incorporating a non-rising spindle headworks and dome type (Models: 3663602930587) or cross top (Models: 3663602930563) operating members. The inlets incorporate a stainless steel strainer. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705081
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
  • Marking: PPI on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    3663602930587 KELD TWIN LEVER KICHEN MIXER TAP WHITE AND 3663602930563 KELD TWIN LEVER KICHEN MIXER TAP CHROME
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London London
    Postcode
    W2 6PX
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705082

Range of single hole, single outlet (swivel) combination tap assembly (chromium plated brass) incorporating a quarter turn ceramic disc headwork and single lever operating members. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705082
  • Expiry date: 31/05/2022
  • Size: Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    3663602930570 AUBERRY TWIN LEVER KITCHEN MIXER TAP CHROME EFFECT & 3663602930556 LOFOI TWIN LEVER KITCHEN MIXER TAP CHROME EFFECT
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London London
    Postcode
    W2 6PX
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705083

Range of deck mounted, two hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Incorporating non-rising spindle headworks and dome type. The spout outlets incorporate a plastic aerator. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705083
  • Expiry date: 31/05/2022
  • Size: ½” BSP (M)
  • Marking: PPI on body
  • Installation Requirements R001 R006 R010
  • Model
    3663602930679 EDITH DECK KITCHEN MOXER TAP CHROME EFFECT
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London London
    Postcode
    W2 6PX
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1705084

Two hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0550 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1705084
  • Expiry date: 31/05/2022
  • Size: ½" BSP (M)
  • Installation Requirements R001 R006 R010
  • Model
    3663602930686 GALLENY DECK KICHEN MIXER TAP CHROME EFFECT
  • Factor: Kingfisher International Products Ltd.
    Company Name
    Kingfisher International Products Ltd.
    Address
    3 Sheldon Square, Paddington, London London
    Postcode
    W2 6PX
    View All Listings by this Company
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1709047

Floor mounted, single hole, single outlet fixed combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a self- cancelling diverter to shower outlet. The product incorporates a waterfall spout and is supplied with a shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0465 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed, self-cancelling diverter to shower outlet. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1709047
  • Expiry date: 30/09/2022
  • Size: ½” BSP (F).
  • Marking: PPI on rear of tap body. PPI on shower handset.
  • Installation Requirements R001 R040 R160
  • Model
    901625
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710034

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever or cross top operating members (M3106 model only). The spout outlets incorporate plastic flow straighteners (except model 170606). The products are supplied with metal backnuts (except model 111316). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1710034
  • Expiry date: 31/10/2022
  • Note: R007 only applies to model 111316
  • Size: M3106, M3206, 170606 models: ¾” BSP (M). 111316 model: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R007 R010
  • Model
    M3106, M3206, 170606, 111316
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710035

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlets incorporate plastic flow straighteners. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1710035
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R010
  • Model
    100806 & 100806B
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710036

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating non-rising spindle headworks with dome type operating members (163108, 163108E & 163108F models) or ceramic disk headworks with single lever operating members (163208 model). The spout outlet incorporates a plastic flow strainer. The products are supplied with a click type waste and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1710036
  • Expiry date: 31/10/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on body
  • Installation Requirements R001 R006 R010
  • Model
    163108, 163108E, 163108F & 163208.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710037

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass). Incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener (except model 170605). The product is supplied with metal backnuts and a shower hose and handset. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710037
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI logo on rear of body
  • Installation Requirements R001 R006 R030
  • Model
    900505, M33175, 100805, 100805A, 170605 & 111305.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710038

Floor mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout outlet incorporates a plastic flow straightener and the product is supplied with a shower hose & handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710038
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI logo on back of body
  • Installation Requirements R001 R030
  • Model
    900525
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710039

Range of two hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks with single lever operating members. The spout incorporates a waterfall outlet. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1710039
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI markings on body
  • Installation Requirements R001 R006 R160
  • Model
    900406, 901606, 901606B, 901606C & 163006.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710042

Deck mounted two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a self-cancelling diverter to shower outlet. The spout incorporates a waterfall outlet. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0530 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, self-cancelling diverter to shower outlet.
  • WRAS Approval Number: 1710042
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI on body.
  • Installation Requirements R001 R006 R040 R160
  • Model
    163005 & 900405.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710040

Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever or cross top (M3105 model only) operating members and a manual diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The product is supplied with a shower hose and handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1710040
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R020
  • Model
    M33215, M33235, M3105 & M3205.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1710041

Range of two hole, metal, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout has a waterfall outlet. The product is supplied with a shower hose and handset and metal backnuts. Maximum working pressure 10.0 Bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1710041
  • Expiry date: 31/10/2022
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R040 R160
  • Model
    901605.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711013

Range of single hole, metal single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ¼ turn ceramic disc headworks and single lever operating members. Spout outlets incorporate either a plastic aerator (901407 model) or plastic flow straightener (all other models). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711013
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of tap body
  • Installation Requirements R001 R006 R010
  • Model
    901407, 901407E, 907016 & 907016A
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711014

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic flow straightener. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711014
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    907002 & 907020
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711038

Thermostatic cartridge with plastic body incorporating EPDM rubber ‘O’-rings. For insertion into specifically dimensioned bores. Maximum operating temperature 70°C.

  • Section: 0442 Thermostatic cartridges
  • WRAS Approval Number: 1711038
  • Expiry date: 30/11/2022
  • Size: Ø23mm.
  • Marking: PPI on base of body.
  • Installation Requirements R001
  • Model
    TC189.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711044

Range of shower outlets with brass or plastic bodies, in chromium or gold plated finishes (see model). Models 364, 364PVD, HS107, HS307, L115-CP and HS119 incorporate a washer that houses a stainless steel strainer. Maximum operating temperature: 80ºC.

  • Section: 1650 Shower Outlets
  • WRAS Approval Number: 1711044
  • Expiry date: 30/11/2022
  • Note: Open outlet use only.
  • Size: ½” BSP (M) or ½” BSP (F) (Model HS119 only)
  • Marking: PPI on Body
  • Installation Requirements R001 R040
  • Model
    Chromium plated brass models: 364 & L292. Gold plated brass model: 364PVD. Chromium plated plastic models: B100111, B11363, B11663, HS107, HS1110CP, HS123, HS126, L115-CP, HS307 & HS119. Models added January 2020 Matt Black: B11663 MBK1 HS126 MBK1 HS307 MBK1
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711011

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type, which incorporates a single check valve cartridge and plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711011
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear-base of tap body.
  • Installation Requirements R001 R010 R090
  • Model
    167028
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1711015

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets are pull-out spray type and incorporate plastic flow straighteners (with the exception of M4107). The hose connection to the outlet incorporates an approved single check valve cartridge, however the complete assembly has not been tested for backflow protection.. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1711015
  • Expiry date: 30/11/2022
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of tap body.
  • Installation Requirements R001 R090
  • Model
    907013, M4107 & M9604T.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712014

Range of single hole, single outlet (swivel) combination tap assemblies (chromium plated brass). Model 111338 incorporates a ceramic cartridge headwork and single lever operating member. Model M3108 incorporates quarter turn ceramic disc headworks, and cross top operating members. The spout outlets incorporate plastic flow straighteners and models are supplied with a click type pop-up waste. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712014
  • Expiry date: 31/12/2022
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R010
  • Model
    M3108 & 111338.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712015

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating ceramic cartridge headworks and single lever operating members. The spout outlets incorporate a plastic flow straightener, with the exception of 170638. Models 162438EX, 100848 & 162938 incorporate a stainless steel strainer at the outlet. Models are also supplied with either a lever operated (100848 only) or click type pop-up waste (all other models). Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1712015
  • Expiry date: 31/12/2022
  • Note: No testing performed on lever operated pop-up waste.
  • Size: Stainless steel braided EPDM lined flexible inlet hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    162438EX, M3208EX, 100848, 162438, 162938 & 170638.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1712016

Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc headworks, available with either cross top (M3101 & M3102) or single lever (M3201 & M3202) operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C (M3101 & M3201) & 85°C (M3102 & M3202).

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1712016
  • Expiry date: 31/12/2022
  • Size: ½” BSP (M) - (M3101 & M3201) or ¾” BSP (M) - (M3102 & M3202).
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006
  • Model
    M3101, M3201, M3102 & M3202.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802045

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener (179401 &179402 models) or a plastic aerator (130401 & 130402 models). The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C (130401 & 179401 models), 85°C (130402 & 179402 models).

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1802045
  • Expiry date: 28/02/2023
  • Size: See model
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    130401 & 179401: ½” BSP (M) 130402 & 179402: ¾” BSP (M)
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802046

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1802046
  • Expiry date: 28/02/2023
  • Size: See model
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005
  • Model
    152101: ½” BSP (M) 152102: ¾” BSP (M)
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802040

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a stainless steel strainer and a plastic flow straightener. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1802040
  • Expiry date: 28/02/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R010
  • Model
    152006
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802041

Range two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disk headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener. The spout outlet on the 179406 model also incorporates a stainless steel strainer. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1802041
  • Expiry date: 28/02/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    143306, 130406 & 179406
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802043

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The 179405 model spout also incorporates a stainless steel strainer. The products are supplied with a shower hose and handset and have metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1802043
  • Expiry date: 28/02/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R030
  • Model
    143305, 130405 & 179405.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802042

Two hole, single outlet (fixed) combination tap assemblies (chromium plated brass) incorporating ¼ turn ceramic disc headworks with single lever operating members and a manually operated diverter to shower outlet. The spout outlet incorporates a plastic flow straightener. The products are supplied with a shower hose and handset and have metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1802042
  • Expiry date: 28/02/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005 R030
  • Model
    152005.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1802044

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating quarter turn ceramic disc headworks (152108 model) or ceramic cartridge headworks (all other models) all with single lever operating members. The spout outlet incorporates a plastic flow straightener, except for the 152038 model which has a plastic aerator. The spout outlets of the 152108 and 179348 models also incorporate a stainless steel strainer. The products are supplied with a click type waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1802044
  • Expiry date: 28/02/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    152108, 152038, 143338, 179428 & 179438.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806006

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members and a cascade type spout. The spout has a waterfall outlet. The product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1806006
  • Expiry date: 30/06/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R160
  • Model
    162106
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1806005

Two-hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks with single lever operating members and a manual diverter to shower outlet. The spout has a waterfall outlet. The product is supplied with a shower hose, handset and metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0520 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed, manually operated diverter to shower outlet.
  • WRAS Approval Number: 1806005
  • Expiry date: 30/06/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R160
  • Model
    162105
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807004

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork and single lever operating members. The spout outlet is a waterfall type. The 163038 model includes a stainless-steel mesh on the outlet. Model 900408 incorporates a stainless-steel mesh within the body of the tap. Models 901608C & 900408 incorporate a plastic flow restrictor. The products are supplied with a click type pop-up waste. Maximum working pressure 5.0 bar. Maximum operating temperature 70ºC.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1807004
  • Expiry date: 31/07/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of tap body
  • Installation Requirements R001 R006 R160
  • Model
    900408, 162638, 162638A, 901608C & 163038.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807005

Range of pillar taps (chromium plated brass or gold finish - GF model) incorporating quarter turn ceramic disc headworks with cross top operating members. Model 179101 is supplied with a plastic flow regulator. All models are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1807005
  • Expiry date: 31/07/2023
  • Size: See Model
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005
  • Model
    179101: ½” BSP (M). 179102 & 179102 GF: ¾” BSP (M).
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1804006

Wall mounted, concealed, thermostatic shower valves incorporating half turn ceramic disc headworks controlling and diverting the flow and the temperature is controlled independently via a thermostatic cartridge, both using dome, cross top or single lever operating members. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1804006
  • Expiry date: 30/04/2023
  • Note: This approval does not include a shower hose and handset.
  • Size: 15mm compression inlet/outlet
  • Marking: PPI on operating member.
  • Installation Requirements R001 R010 R040
  • Model
    803251C, 803251E, 803251J & 803251K.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809011

Range of two hole, single outlet (fixed) deck mounted combination tap assemblies (chromium plated brass, model 173606 MBK1 has a matte black finish), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlets incorporate either a plastic flow straightener (143106 &153306 models), a plastic aerator (172306) or an open outlet (173606). The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1809011
  • Expiry date: 30/09/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 R010
  • Model
    143106, 153306, 172306 & 173606. Models added June 2021 173606 MBK1
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809012

Two hole, single outlet (fixed) deck mounted combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and dome type operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1809012
  • Expiry date: 30/09/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R010
  • Model
    M33146E
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809025

Range of deck mounted two-hole, single outlet (fixed) combination tap assemblies (chromium plated brass). The 179606F model incorporates quarter turn ceramic disc headworks and a combined EPDM washer and stainless steel strainer located between the inlet leg and main body. The M5306 model incorporates non-rising spindle headworks. Both models have cross top operating members. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1809025
  • Expiry date: 30/09/2023
  • Size: ¾” BSP (M)
  • Marking: PPI on rear of body
  • Installation Requirements R001 R005 R010
  • Model
    M5306 & 179606F.
  • Manufacturer: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809026

Range of exposed, wall mounted, bar type thermostatic shower valves (chromium plated brass), incorporating either a non-rising spindle or quarter turn ceramic disc (801104 model only) headwork controlling the flow. Temperature is controlled independently via a thermostatic cartridge with an operating member that incorporates a manual override button. The 801101B and 801104 models have dome type operating members and the 801101A model has single lever operating members. Each inlet incorporates a combined EPDM washer and stainless-steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The product is supplied with a shower hose, chromium plated shower handset and riser rail assembly. Maximum working pressure 10.0 bar. Max operating temperature 60° C.

  • Section: 2010 Valves
  • Section Subtitle: Blending, thermostatic.
  • WRAS Approval Number: 1809026
  • Expiry date: 30/09/2023
  • Size: ¾" BSP x 15mm compression offset union.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R010 R040
  • Model
    801101A, 801101B & 801104.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809057

Range of single hole, single outlet (swivel) combination tap assemblies incorporating ceramic cartridge headworks with single lever operating members. The inlets incorporate a stainless steel strainer. The spout outlets incorporate either an aerator or a flow straightener with stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0470 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1809057
  • Expiry date: 30/09/2023
  • Size: Stainless steel braided EPDM lined hose assembly with ½” BSP captive nut
  • Marking: PPI on body
  • Installation Requirements R001 R006 R009 R010
  • Model
    177004, 177005, 177005 BN, 177006 & 177012
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809062

Single hole, single outlet (swivel) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-out spray type and incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1809062
  • Expiry date: 30/09/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R010 R090
  • Model
    177014.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809063

Single hole, single outlet (swivel) combination tap assemblies (bright nickel or chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull-down spray type and incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0445 Combination Tap Assemblies
  • Section Subtitle: Pullout spray. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment, alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1809063
  • Expiry date: 30/09/2023
  • Size: Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006 r010
  • Model
    137040 BN. Added January 2020 137040 (Chrome).
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1807006

Range of pillar taps (chromium plated brass or gold finish - GF models) incorporating quarter turn ceramic disc headworks and various operating members (see model). The 100801 model incorporates a plastic flow straightener. The 143101, 901001 and 901002 models incorporate a chrome plated plastic flow straightener. The 173601 and 901001 (suffix models) are supplied with a plastic flow regulator for installation on the inlet. All models are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C for all models except for the 173602 model which is 85°C.

  • Section: 1800 Taps
  • Section Subtitle: Pillar, metal.
  • WRAS Approval Number: 1807006
  • Expiry date: 31/07/2023
  • Size: 143101, 100801 173601 & 901001 models: ½” BSP (M). 173602 & 901002 models: ¾” BSP (M).
  • Marking: PPI on rear of body
  • Installation Requirements R001 R006
  • Model
    100801 (single lever operating member). 143101 (single lever operating member). 901001 (single lever operating member). 901001A (dome type operating member). 901001E (dome type operating member). 901001F (cross top operating member). 901001 GF (cross top operating member). 173601 (single lever operating member). 901002 (single lever operating member). 901002A (dome type operating member). 901002E (dome type operating member). 901002F (cross top operating member). 901002 GF (cross top operating member). 173602 (single lever operating member).
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810029

Two hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating quarter turn ceramic disc headworks and single lever operating members. The spout outlet incorporates a plastic flow straightener and the product is supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

  • Section: 0510 Combination Tap Assemblies
  • Section Subtitle: Two hole, metal, single outlet, fixed.
  • WRAS Approval Number: 1810029
  • Expiry date: 31/10/2023
  • Size: ¾” BSP (M).
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R005 R010
  • Model
    181006.
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810040

Floor mounted single hole, single outlet (fixed), combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member and a manual diverter to shower outlet. The spout outlet incorporates a plastic aerator. The product is supplied with a shower hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

  • Section: 0675 Combination Tap Assemblies
  • Section Subtitle: Single outlet, metal, fixed, manual diverter to shower outlet.
  • WRAS Approval Number: 1810040
  • Expiry date: 31/10/2023
  • Size: ½” BSP (F)
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R010 R040
  • Model
    140525
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810041

Range of single hole, single outlet (fixed) combination tap assemblies (chromium plated brass or gold finish - GF suffix model), incorporating quarter turn ceramic disc headworks with a cross top or single lever operating members. The spout outlet incorporates a plastic aerator. The product is supplied with a pop-up waste and alternative inlet hoses which are PEX lined. The PEX lined hoses incorporate a combined washer and a stainless steel strainer. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C, except when installed with alternative PEX lined inlet hoses which is 60°C.

  • Section: 0450 Combination Tap Assemblies
  • Section Subtitle: Single hole, metal single outlet, fixed. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of: • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
  • WRAS Approval Number: 1810041
  • Expiry date: 31/10/2023
  • Note: IRN R009 applies to the optional PEX lined inlet hoses. No testing performed on pop-up waste.
  • Size: Stainless steel braided EPDM or grey polymeric braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections.
  • Marking: PPI on rear of body.
  • Installation Requirements R001 R006 R009 R010
  • Model
    179608F, 179608F GF, 179108 & 172908
  • Factor: PPI Xiamen Industry Co Ltd
    Company Name
    PPI Xiamen Industry Co Ltd
    Address
    No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
    View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 1 of 4