Water Regulations Approval Scheme Ltd

Flowflex Components Ltd. Approvals

WRAS Approval Number: #241108013

Range of CU type press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 241108013
Size:: see models
Marking:: Flowflex logo, WRAS & size etched on body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: Code - Description 572148 - CU PRESS STREET ELBOW 15mm 572189 - CU PRESS FITTING REDUCER 42 x 35mm 572170 - CU PRESS COUPLING 42mm 572162 - CU PRESS STOP END 28mm 572176 - CU PRESS SLIP COUPLER 42mm 572181 - CU PRESS EQUAL TEE 35mm 572161 - CU PRESS STOP END 22mm 572182 - CU PRESS EQUAL TEE 42mm 572191 - CU PRESS FITTING REDUCER 42 x 28mm 572190 - CU PRESS FITTING REDUCER 54 x 42mm 572198 - CU PRESS REDUCED BRANCH TEE 572146 - CU PRESS 45DEG ELBOW 42mm 572160 - CU PRESS STOP END 15mm 572180 - CU PRESS EQUAL TEE 28mm 572171 - CU PRESS COUPLING 54mm 572159 - CU PRESS 45DEG STREET ELBOW 54mm 572149 - CU PRESS STREET ELBOW 22mm 572183 - CU PRESS EQUAL TEE 54mm 572150 - CU PRESS STREET ELBOW 28mm 572184 - CU PRESS FITTING REDUCER 22 x 15mm 572158 - CU PRESS 45DEG STREET ELBOW 42mm 572157 - CU PRESS 45DEG STREET ELBOW 35mm 572199 - CU PRESS REDUCED BRANCH TEE 572151 - CU PRESS STREET ELBOW 35mm 572174 - CU PRESS SLIP COUPLER 28mm 572137 - CU PRESS EQUAL ELBOW 22mm 572143 - CU PRESS 45DEG ELBOW 22mm 572168 - CU PRESS COUPLING 28mm 572196 - CU PRESS REDUCED BRANCH TEE 572177 - CU PRESS SLIP COUPLER 54mm 572140 - CU PRESS EQUAL ELBOW 42mm 572141 - CU PRESS EQUAL ELBOW 54mm 572167 - CU PRESS COUPLING 22mm 572169 - CU PRESS COUPLING 35mm 572195 - CU PRESS REDUCED BRANCH TEE 572142 - CU PRESS 45DEG ELBOW 15mm 572166 - CU PRESS COUPLING 15mm 572192 - CU PRESS FITTING REDUCER 54 x 35mm 572178 - CU PRESS EQUAL TEE 15mm 572147 - CU PRESS 45DEG ELBOW 54mm 572165 - CU PRESS STOP END 54mm 572139 - CU PRESS EQUAL ELBOW 35mm 572164 - CU PRESS STOP END 42mm 572179 - CU PRESS EQUAL TEE 22mm 572144 - CU PRESS 45DEG ELBOW 28mm 572175 - CU PRESS SLIP COUPLER 35mm 572163 - CU PRESS STOP END 35mm 572138 - CU PRESS EQUAL ELBOW 28mm 572145 - CU PRESS 45DEG ELBOW 35mm 572197 - CU PRESS REDUCED BRANCH TEE 572194 - CU PRESS FITTING REDUCER 42 x 22mm 572187 - CU PRESS FITTING REDUCER 35 x 28mm 572153 - CU PRESS STREET ELBOW 54mm 572154 - CU PRESS 45DEG STREET ELBOW 15mm 572173 - CU PRESS SLIP COUPLER 22mm 572155 - CU PRESS 45DEG STREET ELBOW 22mm 572156 - CU PRESS 45DEG STREET ELBOW 28mm 572186 - CU PRESS FITTING REDUCER 28 x 22mm 572172 - CU PRESS SLIP COUPLER 15mm 572136 - CU PRESS EQUAL ELBOW 15mm 572185 - CU PRESS FITTING REDUCER 28 x 15mm 572188 - CU PRESS FITTING REDUCER 35 x 22mm 572152 - CU PRESS STREET ELBOW 42mm 572208 - CU PRESS REDUCED END TEE 572209 - CU PRESS REDUCED END AND BRANCH TEE 572200 - CU PRESS REDUCED BRANCH TEE 572203 - CU PRESS REDUCED BRANCH TEE 572204 - CU PRESS REDUCED BRANCH TEE 572201 - CU PRESS REDUCED BRANCH TEE 572207 - CU PRESS REDUCED BRANCH TEE 572202 - CU PRESS REDUCED BRANCH TEE 572202 - CU PRESS REDUCED BRANCH TEE 572206 - CU PRESS REDUCED BRANCH TEE

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #250804001

Range of screw down drain valves with brass bodies, for use with copper tube to BSEN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 2310 Valves
Section Subtitle:: Stop, metal, screw down.
WRAS Approval Number:: 250804001
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: SEE MODELS
Marking:: Size, Flowflex UK & EN1254-2 on nut Size & BS2879 on body.
Installation Requirements:: R001 R511
Expiry date:: 31/08/2030
Model:: P801DO.2 22mm elbow with MT cock P802DO.1 22mm x ¾” elbow with MT Cock P901DO.1 15mm straight coupler with MT Cock P901DO.2 22mm straight coupler with MT Cock

Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482

View All Listings by this Company

WRAS Approval Number: #250304701

Range of shower booster pumps with brass bodies and plastic impellers. The body incorporates a single check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure: 4.0 bar. Maximum operating temperature: 70°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250304701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (F).
Marking:: Flowflex, flow arrow and BS6282-5 on body.
Installation Requirements:: R001
Expiry date:: 31/03/2030
Model:: SP2B, SP1 (same as SP2B without electronics), SP22S (2 x SP2B connected electronically), SP21S (1 x SP2B & 1 x SP1 connected electrconically), SP2U (SP2B without transformer), SP1U (SP1 without transformer).

Approval Holder:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #2301372

Range of spherical valves with nickel plated brass bodies, chome plated brass balls and EPDM O-rings. Connection to be used with copper pipe EN1057. Maximum working pressure 16 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:: 2260 Valves
Section Subtitle:: Spherical, metal.
WRAS Approval Number:: 2301372
Size:: see model
Marking:: Flowflex on operating member date of manufacturer & (MM-YY) on body
Installation Requirements:: R001
Expiry date:: 31/01/2028
Model:: 6111M.15B 15MM PressFit Lever Ball Valve 6112M.22B 22MM PressFit Lever Ball Valve 6113M.28B 28MM PressFit Lever Ball Valve

Approval Holder:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #241108015

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 241108015
Size:: see models
Marking:: Flowflex logo, WRAS & size etched on body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: Code Description 675152 CU PRESS 45DEG STREET ELBOW 15mm 675185 CU PRESS 45DEG STREET ELBOW 22mm 675189 CU PRESS 45DEG STREET ELBOW 28mm 675220 CU PRESS 45DEG ELBOW 15mm 675221 CU PRESS 45DEG ELBOW 22mm 675226 CU PRESS 45DEG ELBOW 28mm 675269 CU PRESS EQUAL ELBOW 15mm 675270 CU PRESS EQUAL ELBOW 22mm 675300 CU PRESS EQUAL ELBOW 28mm 675319 CU PRESS STREET ELBOW 15mm 675327 CU PRESS STREET ELBOW 22mm 675331 CU PRESS STREET ELBOW 28mm 675334 CU PRESS EQUAL TEE 15mm 675341 CU PRESS EQUAL TEE 22mm 674003 CU PRESS EQUAL TEE 28mm 674071 CU PRESS REDUCED END TEE 674176 CU PRESS FITTING REDUCER 22 x 15mm 674171 CU PRESS FITTING REDUCER 28 x 15mm 674179 CU PRESS FITTING REDUCER 28 x 22mm 674223 CU PRESS COUPLING 15mm 674231 CU PRESS COUPLING 22mm 674240 CU PRESS COUPLING 28mm 674305 CU PRESS STOP END 15mm 674332 CU PRESS STOP END 22mm 674355 CU PRESS STOP END 28mm

Approval Holder:: The Highbourne Group, City Plumbing Supplies

Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #250804703

Range of brass press fittings for use with copper pipe (manufactured to EN1057:2006 and +A1:2010 Seamless round copper tube, R250 half hard). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250804703
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Flowflex logo and size on body.
Installation Requirements:: R001
Expiry date:: 31/08/2030
Model:: 6090GM Female Elbow: 6090GM.15x½B. 6090GM.22x¾B. 6090GM.28x1B. 6092GM Male Elbow: 6092GM.15x½B. 6092GM.22x¾B. 6092GM.28x1B. 6130GM Female Tee: 6130GM.151215B. 6130GM.221222B. 6130GM.223422B. 6130GM.281228B. 6130GM.283428B. 6130GM.351235B. 6130GM.421242B. 6130GM.541254B 6240GM Swivel Connector: 6240GM.15x¾B. 6240GM.22x1B. 6240GM.28x l¼B. 6243GM Male Adaptor: 6243GM.15x½B. 6243GM.15x¾B. 6243GM.22x½B. 6243GM.22x1B. 6243GM.22x¾B 6243GM.28x1B 6243GM.28x¾B 6243GM.35x 1¼B. 6243GM.35x1B 6243GM.42x 1½B. 6243GM.54x2B. 6243GM.67x 2½B. 6243GM.76x3B. 6270GM Female Adaptor: 6270GM.15x½B. 6270GM.15x¾B. 6270GM.22x½B. 6270GM.22x1B. 6270GM.22x¾B. 6270GM.28x1B. 6270GM.28x¾B. 6270GM.35x 1¼B. 6270GM.35x1B. 6270GM.42x 1½B. 6270GM.54x2B 6341GM Male Union: 6341GM.15x½B. 6341GM.22x¾B. 6341GM.28x1B. 6472GM Wallplate Elbow: 6472GM.15x½B.

Approval Holder:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #241108017

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 241108017
Size:: see models
Marking:: Flowflex logo, WRAS & size etched on body.
Installation Requirements:: R001
Expiry date:: 30/04/2029
Model:: 5063022703699 PRESS 45DEG STREET ELBOW 15mm 5063022703569 PRESS 45DEG STREET ELBOW 22mm 5063022703705 PRESS 45DEG STREET ELBOW 28mm 5063022703576 PRESS 45DEG ELBOW 15mm 5063022703590 PRESS 45DEG ELBOW 22mm 5063022703682 PRESS 45DEG ELBOW 28mm 5063022703637 PRESS EQUAL ELBOW 15mm 5063022703620 PRESS EQUAL ELBOW 22mm 5063022703750 PRESS EQUAL ELBOW 28mm 5063022703613 PRESS STREET ELBOW 22mm 5063022703743 PRESS STREET ELBOW 28mm 5063022703781 PRESS EQUAL TEE 15mm 5063022703521 PRESS EQUAL TEE 22mm 5063022703767 PRESS EQUAL TEE 28mm 5063022703729 PRESS REDUCED END TEE 5063022703712 PRESS REDUCED BRANCH TEE 5063022703774 PRESS FITTING REDUCER 22 x 15mm 5063022703736 PRESS FITTING REDUCER 28 x 15mm 5063022703545 PRESS FITTING REDUCER 28 x 22mm 5063022703644 PRESS COUPLING 15mm 5063022703675 PRESS COUPLING 22mm 5063022703583 PRESS COUPLING 28mm 5063022703606 PRESS SLIP COUPLER 15mm 5063022703651 PRESS SLIP COUPLER 22mm 5063022703668 PRESS STOP END 15mm 5063022703538 PRESS STOP END 22mm 5063022703552 PRESS STOP END 28mm

Approval Holder:: Kingfisher International Products Ltd.

Company Name
Kingfisher International Products Ltd.
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #2211366

‘Flowflex,’ and ‘Opal’ ranges of brass, DZR brass, chromium plated brass, nickel plated brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:: 1140 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2211366
Size:: See models.
Marking:: FLOWFLEX, Size, EN1542-2, UK or UK Made OPAL, Size, EN1254-2 CR on DZR models
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: 99713 Flowflex Brass Compression Straight Coupling 10mm, 44117 Opal Brass Compression Straight Coupling 15mm, 59406 Opal Brass Compression Straight Coupling 22mm, 50808 Opal Brass Compression Straight Coupling 28mm, 57128 Flowflex Brass Compression Reducing Coupling 15 x 8mm, 93356 Flowflex Brass Compression Reducing Coupling 15 x 10mm, 75499 Flowflex Brass Compression Reducing Coupling 22 x 15mm, 44694 Flowflex Brass Compression Reducing Coupling 28 x 22mm, 46376 Opal Brass Compression Repair Coupling 15 x 100mm, 91660 Opal Brass Compression Male Adaptor 15mm x ½”, 60156 Opal Brass Compression Male Adaptor 22mm x ¾”, 12167 Opal Brass Compression Male Adaptor 22mm x 1”, 85952 Opal Brass Compression Male Adaptor 28mm x 1”, 39623 Opal Brass Compression Female Adaptor 15mm x ½”, 37759 Opal Brass Compression Female Adaptor 22mm x ¾”, 20725 Opal Brass Compression Female Adaptor 22mm x 1”, 14922 Opal Brass Compression Female Adaptor 28mm x 1”, 75114 Opal Brass Compression Straight Tap Connector 15mm x ½”, 92409 Opal Brass Compression Straight Tap Connector 22mm x ¾”, 58277 Opal Brass Compression Tank Connector 15mm, 54014 Opal Brass Compression Tank Connector 22mm, 78520 Opal Brass Compression Tank Connector 28mm, 43650 Flowflex DZR Brass Compression Three Piece Reducing Set 15 x 10mm, 21910 Flowflex DZR Brass Compression Three Piece Reducing Set 22 x 15mm, 25902 Flowflex Brass Compression Stop End 10mm, 63232 Opal Brass Compression Stop End 15mm, 28223 Opal Brass Compression Stop End 22mm, 42207 Opal Brass Compression Stop End 28mm, 47899 Flowflex Brass Compression Equal Elbow 10mm, 23847 Opal Brass Compression Equal Elbow 15mm, 19605 Opal Brass Compression Equal Elbow 22mm, 33123 Opal Brass Compression Equal Elbow 28mm, 64668 Opal Brass Compression Male Elbow 15mm x ½”, 33647 Opal Brass Compression Male Elbow 22mm x ¾”, 26618 Opal Brass Compression Female Elbow 15mm x ½”, 48823 Opal Brass Compression Female Elbow 22mm x ¾”, 29554 Opal Brass Compression Wallplate Elbow 15mm x ½”, 46354 Opal Brass Compression Wallplate Elbow 22mm x ¾”, 65566 Opal Brass Compression Bent Tap Connector 15mm x ½”, 17824 Opal Brass Compression Bent Tap Connector 22mm x ¾”, 91205 Flowflex Brass Compression Equal Tee 10mm, 22749 Opal Brass Compression Equal Tee 15mm, 67294 Opal Brass Compression Equal Tee 22mm, 92176 Opal Brass Compression Equal Tee 28mm, 98758 Opal Brass Compression Reduced Branch Tee 22 x 22 x 15mm, 79889 Opal Brass Compression Reduced Branch Tee 28 x 28 x 15mm, 81926 Opal Brass Compression Reduced Branch Tee 28 x 28 x 22mm, 27062 Opal Brass Compression Reduced End Tee 22 x 15 x 22mm, 84560 Opal Brass Compression Reduced Branch and End Tee 22 x 15 x 15mm.

Approval Holder:: Toolstation Ltd.

Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

WRAS Approval Number: #250804708

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250804708
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to model.
Marking:: Flowflex logo and size on body.
Installation Requirements:: R001
Expiry date:: 31/08/2030
Model:: Male Adaptor: 572210 - 15X1/2B 572211 - 22X3/4B 572212 - 28X1B 572213 - 35X1.1/4B 572214 - 42X1.1/2B 572215 - 54X2B Female Adaptor: 572216 - 15X1/2B 572217 - 22X3/4B 572218 - 28X1B 572219 - 35X1.1/4B 572220 - 42X1.1/2B 572221 - 54X2B Wallplate Elbow: 572222 - 15x½B.

Approval Holder:: Wolseley UK Ltd.

Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company
Manufacturer:: Flowflex Components Ltd.

Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company