Section Code 1530 :
Back To Directory SectionsWater hammer arrester (chromium plated brass), incorporating EPDM seals. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Range of brass bodied differential bypass valves incorporating a spring-loaded adjustment facility. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.
Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Click type pop-up waste with a plastic body. The products are supplied with a plastic backnut.
Fully automatic electronic anti-leakage system. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Flow sensor with plastic body and turbine. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.
Range of pressure sensors with stainless steel bodies, EPDM ‘O’-rings and ceramic diaphragms. Rectus 21 model has a maximum working pressure of 20.0 bar. ¼” BSP (M) model has a maximum working pressure of 50.0 bar. Cold water use only. From November 2019 Maximum operating temperature 85°C
Range of flow sensors. Maximum working pressure 12.0 bar. Maximum operating temperature 99˚C
Silver anode intended to be used within an ion generating water conditioner. Maximum operating temperature 40°C.
`Prox and Wave` ranges of sensor operated flow control devices incorporating solenoid valves with acetal bodies, EPDM rubber diaphragms, stainless steel pins and plungers. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.
Range of test port assemblies with DZR brass bodies. Maximum working pressure 25.0 Bar, Maximum operating temperature 100°C
Range of electronically controlled, wall mounted, shower flow control devices with chromium plated brass bodies. The flow is controlled by a solenoid valve. The inlets of the products incorporate a stainless-steel strainer. Neptune 1011 is infrared operated. Perfect Time SH 1011 is touch operated. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.
Plastic turbine for insertion into specifically dimensioned flow meters. Maximum operating temperature 85°C. Open outlet use only.
Appliance inlet group assembly comprising a Y-pattern strainer, two, nickel plated brass adaptors, double check valve assembly (DZR brass, chrome plated body – verified by test, suitable for backflow protection against Fluid Category 3), dual layer PVC supply hose and a solenoid incorporating a strainer. Two of the solenoid outlets incorporate a plastic flow regulator. Maximum working pressure 7.0 bar. Maximum operating temperature 60°C.
Thermostatic circulation valve incorporating a DZR brass body and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.
Range of black (metric) or grey (imperial) flow regulating valves (plastic bodies) with rising spindle headworks & EPDM ‘O’-rings. For use with LLDPE pipe. Maximum working pressure 10.0 bar. Cold water use only.
Range of in line regulating valves with brass bodies, EPDM `O` rings. The valves incorporate a non-rising spindle headwork for temperature regulation. For above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Range of vertical lift valves with bronze bodies and metal to metal seals Maximum working pressure 32 bar. Maximum operating temperature 85°C
Range of below ground hose union taps within a chamber incorporating a brass spherical valves, hose connector and MDPE couplings. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C
Wall brackets with brass bodies (chromium plated) and EPDM o-rings. Maximum working temperature 85°C
Pressure boosting system suitable for direct connection to a wholesome water supply. The product discharges via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a quadruple layered flexible inlet hose consisting of a black coloured TPE inner layer, PVC middle layer, braided PE third layer and white PVC outer layer. The water downstream of the AB airgap assembly is not for wholesome use. Maximum working pressure 10.0 bar. Cold water use only.
Range of combined bath filler and/or waste and overflow assemblies in various finishes. Maximum operating temperature 60ºC.
In-line plastic flow regulator housed within a brass body incorporating EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
In-line plastic flow regulator housed within a brass body (chrome plated) incorporating a plastic strainer and an EPDM ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Thermostatic circulation valve incorporating a DZR brass body and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.
Raindance Select E range of wall ceiling or wall mounted shower outlets having brass bodies. Maximum operating temperature 70°C
Range of click type, pop-up wastes with metal bodies and rubber seals. Supplied with brass backnuts. Maximum operating temperature 65°C
Range of flow meters with plastic bodies and EPDM ‘O’-rings. Maximum working pressure 8.0 Bar. Cold water use only.
Range of tempering valves with brass bodies incorporating a thermostatic element. Each inlet comprises of a 90° elbow incorporate spherical valve and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 90°C
Electronically controlled advanced flow control pilot valve assembly with stainless steel body and EPDM diaphragm. Maximum working pressure 16.0 bar. Cold water use only
Chromium plated click type pop up waste with metal body and rubber seals. Supplied with a metal backnut.
Range of flow regulators, aerators and flow straighteners with plastic bodies, EPDM O-rings. Models JM030503 & JM030002 incorperate a stainless steel mesh. Maximum operating temperature 60°C.
Range of elbows (brass body with various finishes) and shower hoses. The inlet of the shower hose incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.
Flow restriction block having a stainless-steel body and integral stainless-steel filter, EPDM ‘O’-rings and NBR washers. Maximum working pressure 16.0 Bar. Cold water use only.
Water hammer arrestor with brass body and EPDM ‘O’ ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.
Ranges of sensor operated flow control devices incorporating solenoid valves with acetal bodies, EPDM rubber diaphragms, stainless steel pins and plungers. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.
Range of metering stations with DZR brass bodies and EPDM ‘O’-rings. Maximum working pressure 25.0 bar. Maximum operating temperature 90°C.
‘Promag D’ Range of flow meters with nylon flow tube liners, stainless steel flange connectors and EPDM ‘O’ - rings. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.
Angled valve with a (chrome plated) brass body incorporating a rising spindle that controls the flow. Maximum working pressure 10.0 bar. Cold water use only.
Continuous circulation valve (brass body) incorporating a lever operated spherical valve and a port with a plastic plug. Maximum working pressure 10.0 bar. Maximum operating temperature 30°C.
Range of wall mounted bath spouts having chromium plated brass bodies with plastic aerators. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Range of stainless steel pipe expansion joints incorporating flanged end connections. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.
Range of stainless-steel bellows with screwed ends. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of spout outlets with brass bodies (chrome plated or unlacquered brass), incorporating a plastic aerator and NBR ‘O’-rings. Maximum operating temperature 60°C.
Direct coupler (brass with a range of finishes) incorporating EPDM ‘O’-rings. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.
Brass adaptor for flexible tail connectors. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted shower outlet elbow (various finishes) and shower handset holder, incorporating EPDM ‘O’-rings. Maximum operating temperature 65°C.
Range of pressure level transmitters with stainless steel bodies and an EPDM ‘O’-ring. Maximum working pressure: Type 711 - 0.1bar, 0.2bar, 0.3bar, 0.4bar, 0.5bar, 0.6bar, 1.0bar, 2.0bar, 4.0bar, 6.0bar, 10.0bar and 16.0bar. Type 712 - 0.3bar, 1.0bar, 1.6bar, 2.5bar, 1.4bar, 2.0bar and 3.0bar. Type 713 - 0.6bar, 1.0bar, 1.6bar, 2.5bar, 4.0bar, 6.0bar, 10.0bar and 16.0bar. Maximum operating temperature 80°C (Type 711). Maximum operating temperature 85°C (Type 712 & 713).
Digital, plastic in-line water powered shower meter. Maximum working pressure 3.0 bar. Maximum operating temperature 85°C.
Top entry compression cylinder flange with DZR brass body and copper anti-aeration dip tube. Maximum working pressure 4.0 bar. Maximum operating temperature 60°C.
Page 1 of 5
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
