HaGePe International B.V (HGP International) Approvals


#1907917

In-line plastic flow regulator housed within a brass body incorporating EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1907917
Expiry date:
31/07/2024
Size:
¾” BSP (M) inlet and outlet
Marking:
HL2024 (brand of HGP), flow arrow, flow rate, model (3P) and size on adhesive label on body.
Installation Requirements:
R001 R120
Model:
HL2024 Inline 3P 3-4 M-M From August 2020 the model will change to HL2024 Inline 3P 3-4 M-M change to HL2024 Inline Cartridge 3P 3/4’’ Model added August 2020: HL2024 Control Flow 3P 3/4’’
Manufacturer:
HaGePe International B.V (HGP International)
Company Name
HaGePe International B.V (HGP International)
Address
Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Print This Approval


#1907915

In-line plastic flow regulator housed within a brass body (chrome plated) incorporating a plastic strainer and an EPDM ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1907915
Expiry date:
31/07/2024
Size:
½” BSP (F) inlet x ½” BSP (M) outlet
Marking:
HL2024 (brand of HGP) and flow arrow on body. Marking from June 2021: HL2024 (brand of HGP), KIWA Z OL and flow arrow on body.
Installation Requirements:
R001 R040
Model:
HL2024 Shower regulator
Manufacturer:
HaGePe International B.V (HGP International)
Company Name
HaGePe International B.V (HGP International)
Address
Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Print This Approval


#1911902

Range of tap regulators, comprising of an EPDM ‘O’-ring (M22 model) or flat seal (M24 model), a plastic flow regulator and a plastic aerator with a stainless steel strainer housed within a chrome plated brass body. Maximum operating temperature 85°C.

Section:
0435 Combination Tap Assemblies - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
1911902
Expiry date:
30/11/2024
Note:
Open outlet use only.
Size:
See model.
Marking:
HL2024 (brand of HGP), KIWA and OLZ on body.
Installation Requirements:
R001 R040
Model:
HL2024 M22: M22 female inlet. HL2024 M24: M24 male inlet.
Manufacturer:
HaGePe International B.V (HGP International)
Company Name
HaGePe International B.V (HGP International)
Address
Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Print This Approval


#2005044

In-line plastic flow regulator housed within a brass body (chrome plated) or stainless steel body (HL2024 Cradle model only) incorporating a plastic strainer and EPDM ‘O’-rings. HL2024 Inline 1P BSP threaded models also have NBR/fibre gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2005044
Expiry date:
31/05/2025
Note:
Claims for flow rate are made by the manufacturer and not considered part of the listing.
Size:
HL2024 Inline 1P models: ½” BSP (F) inlet to ½” BSP (M) outlet, ½” BSP (M) inlet to ½” BSP (F) outlet, 15mm compression inlet/outlet, ¾” BSP (M) inlet/outlet. HL2024 Connect: ¾” BSP (F) inlet to ¾” BSP (M) outlet. HL2024 Connect-S 7.5: ½” BSP (M) inlet offset to ¾” BSP (M) outlet. HL2024 Inline Cartridge 3P & HL2024 Cradle 3P: ½” BSP (M) inlet/outlet machined to accept a 15mm compression nut and olive (not supplied or considered part of the approval listing).
Marking:
HL2024 Connect model 3/4": HL2024 (brand of HGP), flow arrow and Kiwa engraved on body. HL2024 Connect-S 7.5 1-2 3-4 model: HL2024 (brand of HGP) and flow rate embossed on body. All other models: HL2024 (brand of HGP), flow arrow & flow rate on adhesive label on body. Models HL2024 Control Flow 1P & HL2024 Control Flow 3P - HL2024 (brand of HGP), flow arrow & flow rate on adhesive label on body. HL2024 Thermastream model - HL2024 (brand of HGP), flow arrow and Kiwa engraved on body. HL2024 Thermastream S7 model - HL2024 (brand of HGP) and flow rate embossed on body.
Installation Requirements:
R001
Model:
HL2024 Inline 1P. HL2024 Connect. HL2024 Connect-S 7.5. HL2024 Inline Cartridge 3P. HL2024 Cradle 3P. Models added August 2020: HL2024 Control Flow 1P 1/2‘‘ f-m HL2024 Control Flow 1P 1/2‘‘ m-f HL2024 Control Flow 1P 15mm HL2024 Control Flow 1P 3/4‘‘ HL2024 Thermastream 3/4‘‘ HL2024 Thermastream S7.5 1/2’’-3/4’’ HL2024 Control Flow 3P 15mm
Manufacturer:
HaGePe International B.V (HGP International)
Company Name
HaGePe International B.V (HGP International)
Address
Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Print This Approval


#2009051

Range of in-line plastic flow regulators. The flow regulator is housed within a black plastic body incorporating a plastic strainer and an EPDM ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2009051
Expiry date:
30/09/2025
Size:
¾” BSP (M)
Marking:
Flow arrow, flow rate, HL2024 (brand of HGP), connection size and connection type on adhesive label on body. Flow arrow on body.
Installation Requirements:
R001
Model:
HL2024 Inline Cartridge 3P 3-4 EC EP. HL2024 Control Flow 3P 3-4 EC EP. HL2024 Inline Cartridge 3P 3-4 FL EP. HL2024 Control Flow 3P 3-4 FL EP. Where: EC = BSPP ¾” Euroconus. FL = BSPP ¾” Flat Faced.
Manufacturer:
HaGePe International B.V (HGP International)
Company Name
HaGePe International B.V (HGP International)
Address
Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Print This Approval


#2305913

Flow regulator with a plastic body. 4.0 - 8.5L/min. Claims of flow regulation performance made by manufacturer have note been tested and are not covered as part of this approval.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2305913
Expiry date:
31/05/2028
Note:
Open outlet use only.
Size:
Ø20.37 x 19.33mm
Marking:
HL2024 FC (brand of HaGePe) on body
Installation Requirements:
R001
Model:
HL2024
Factor:
HaGePe International B.V (HGP International)
Company Name
HaGePe International B.V (HGP International)
Address
Huizermaatweg 27-2 1273 NA Huizen

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.