Brita GmbH Approvals


#1910050

Range of flow meters with plastic bodies and EPDM ‘O’-rings. Maximum working pressure 8.0 Bar. Cold water use only.

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
1910050
Expiry date:
31/10/2024
Size:
see mdoel
Marking:
BRITA and flow arrow on body. BRITA on meter box. FlowMeter 10-100 model also includes: BRITA, model number and other technical info on adhesive label on meter box.
Installation Requirements:
R001
Model:
FlowMeter 10-100: ⅜" BSP (M) inlet/outlet. FlowMeter 100-700: ¾" BSP (M) inlet/outlet.
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


#2003061

Range of water filter systems with polypropylene housing and cartridge and EPDM `O`-rings. The inlet also incorporates a single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.9 bar

Section:
1055 Filter Cartridges
WRAS Approval Number:
2003061
Expiry date:
31/03/2025
Note:
Cold water use only.
Size:
¾” BSP (M)
Marking:
Brita & Model on Distributor head
Installation Requirements:
R001 R120 R150 R170
Model:
Purity 450 Quell ST, Purity 600 Quell ST, Purity 1200 Quell ST, Purity Finest 600, Purity Finest 1200. To be used with Distributor head or measuring and Display Head.
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


#2005031

Range of water filters comprising of plastic filter cartridges with carbon blocks and plastic filter heads for use with 'John Guest LLDPE' pipe. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2005031
Expiry date:
31/05/2025
Size:
8mm push-fits inlets and outlets
Marking:
Brita, model, pressure, temperature and product information on label on filter body. Brita, pressure, temperature and flow arrow on label on body of filter head
Installation Requirements:
R001 R120 R150 R170
Model:
CLARITY Taste 50. CLARITY Taste 100. CLARITY Filter head. Model added November 2020 CLARITY Protect 100.
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


#2005024

Range of in-line water filters (cartridge and head) with plastic bodies and EPDM ‘O’ rings. The A 1000 model incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2005024
Expiry date:
31/05/2025
Size:
3/8” BSP (M)
Marking:
BRITA, PN, model and product information on body
Installation Requirements:
R001 R120 R150 R170
Model:
A 1000 & C1000 AC
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


#2010309

‘Purity’ range of plastic filter heads with EPDM ‘O’-rings. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2010309
Expiry date:
31/10/2025
Size:
See model
Marking:
Brita, PN, model, product information and contact details on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170
Model:
Purity C IQ: ⅜” BSP (M) Purity C IQ: 8mm push fit connection
Factor:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company

Print This Approval


#2010336

Range of under-counter or counter-top drinking water dispensers delivering still ambient, still chilled & sparkling water. HygienePlus®. Models incorporate a built-in filter system. The flow is controlled by a solenoid valve which is either operated by a touch or a touch pad. The water is dispensed via a tap arrangement on under-counter versions or an integrated outlet on counter-top versions. The inlets incorporate an approved check valve cartridge assembly however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2010336
Expiry date:
31/10/2025
Size:
¾” BSP (F).
Marking:
Brita, model and technical information on side or top body.
Installation Requirements:
R001 R150 R160 R170
Model:
VIVREAU Extra 50. VIVREAU Extra 50 HygienePlus®. VIVREAU Extra 85. VIVREAU Extra 85 HygienePlus®. VIVREAU Top 50. VIVREAU Top 50 HygienePlus®. VIVREAU Top 85. VIVREAU Top 85 HygienePlus®.
Factor:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company

Print This Approval


#2012357

Range of single hole, single outlet (swivel) combination tap assemblies (stainless steel bodies). The flow of hot and cold water is controlled by a ceramic cartridge headwork with single lever operating member. The flow of filtered water (filter not supplied) is controlled by a quarter turn ceramic disc headwork with a single lever operating member The spout outlets incorporate a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole, metal, single outlet, swivel. Taps used in high risk installations, such as kitchen sinks, are considered to be a fluid category 5 risk. Backflow protection is usually provided in the form of an AUK3 tap gap. Where an AUK3 tap gap cannot be maintained, for example where the tap gap is compromised as a result of:- • the tap being lowered in any way; • adjustment to the spout which reduces the distance between the tap outlet and spillover level of the sink; • or the operation of a pull out hose attachment; alternative fluid category 5 backflow protection is required.
WRAS Approval Number:
2012357
Expiry date:
31/12/2025
Note:
This approval does not include a filter head or filter cartridge. R010 applies to the hot and cold inlet hoses, not the hose for the filtered water. R150 applies to the filtered water inlet.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Brita logo on operating member. Production code (MM/YYYY) on label on cold water hose.
Installation Requirements:
R001 R006 R009 R010 R120 R150 R170
Model:
3-way tap rectangle: 1039050. 3-way tap round: 1039051.
Factor:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company

Print This Approval


#2012034

Range of water filter systems with optional distributor heads. The inlets incorporate a non-return valve. Maximum working pressure 6.9 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2012034
Expiry date:
31/12/2025
Size:
¾” BSP male inlet and outlet
Marking:
BRITA, WRAS and technical information on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170
Model:
Professional water filter system (B2B) "Purity Steam":- Purity 450 Steam including cartridge assembly Purity 450 and lid assembly MDU 450 or optional lid assembly DH 450. Purity 600 Steam including cartridge assembly Purity 600 Steam and lid assembly MDU 600 or optional lid assembly DH 600. Purity 1200 Steam including cartridge assembly 1200 and lid assembly MDU 1200 or optional lid assembly DH 1200 The models are available with two different distributor heads (MDU and DH), the MDU (measurement display unit) has an electronic display to show the filtered volume, the DH (distributor head) has no electronic display.
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


#2009056

Range of water filters comprising of plastic filter heads and plastic filter cartridges with granular activated carbon (Purity C50 fresh only), calcium carbonate (Purity Fresh C50 only) or granular activated carbon and ion exchange resin (all other models). The push-fit models are for use with John Guest LLDPE tube. Maximum working pressure 8.6 bar. Cold water use only.

Section:
1050 Filters and Housings
WRAS Approval Number:
2009056
Expiry date:
30/09/2025
Note:
Discharge from the rinsing tube must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Size:
G3/8” filter heads: ⅜” BSP (M) inlets and outlets. JG/8 filter heads: 8mm push-fit inlets and outlets.
Marking:
BRITA, model number, maximum temperature, maximum pressure and other technical information on adhesive label on body and filter head.
Installation Requirements:
R001 R120 R150 R170
Model:
Filter Cartridges: Purity C25 Quell ST, Purity C50 Quell ST, Purity C150 Quell ST, Purity C300 Quell ST, Purity C500 Quell ST, Purity C1100 Quell ST. Purity C150 Finest, Purity C300 Finest, Purity C500 Finest, Purity C1100 Finest. Purity Fresh C50. PURITY C300 DISPENSER, PURITY C500 DISPENSER, PURITY C1100 DISPENSER. PURITY C500 MinUp. P1000, P3000. Filter Heads: 0-70% G3/8” (1013637), 0-70% JG/8 (1013636), 0% G3/8” (1002949), 0% JG/8 (1002942), 30% G3/8” (1002952) & 30% JG8 (1002945).
Manufacturer:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Phone
+49 6128 746 0

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.