Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #250702702

Range of cold-water supply booster sets, incorporating a stainless-steel manifold system and between 1 and 4 pumps depending on model. The booster sets also incorporate spherical valves and non-return valves. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250702702
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Manifold size is dependent on pump type and number of pumps, as shown below: Pump Type, No. of Pumps, Inlet Size, Outlet Size 1SV, 1, 1" BSP (M), 1" BSP (M) 1SV, 2, 2" BSP (M), 2" BSP (M) 1SV, 3, 2" BSP (M), 2" BSP (M) 1SV, 4, 2" BSP (M), 2" BSP (M) 3SV, 1, 1" BSP (M), 1" BSP (M) 3SV, 2, 2" BSP (M), 2" BSP (M) 3SV, 3, 2" BSP (M), 2" BSP (M) 3SV, 4, 2" BSP (M), 2" BSP (M) 5SV, 1, 1.1/4" BSP (M), 1.1/4" BSP (M) 5SV, 2, 2" BSP (M), 2" BSP (M) 5SV, 3, 2" BSP (M), 2" BSP (M) 5SV, 4, 2.1/2" BSP (M), 2.1/2" BSP (M) 10SV, 1, 1.1/2" BSP (M), 1.1/2" BSP (M) 10SV, 2, 2.1/2" BSP (M), 2.1/2" BSP (M) 10SV, 3, 3" BSP (M), 3" BSP (M) 10SV, 4, 3" BSP (M), 3" BSP (M) 15SV, 1, 2" BSP (M), 2" BSP (M) 15SV, 2, 3" BSP (M), 3" BSP (M) 15SV, 3, DN100 Flanged, DN100 Flanged 15SV, 4, DN125 Flanged, DN100 Flanged 1HM, 1, 1" BSP (M), 1" BSP (M) 1HM, 2, 2" BSP (M), 2" BSP (M) 1HM, 3, 2" BSP (M), 2" BSP (M) 1HM, 4, 2" BSP (M), 2" BSP (M) 3HM, 1, 1" BSP (M), 1" BSP (M) 3HM, 2, 2" BSP (M), 2" BSP (M) 3HM, 3, 2" BSP (M), 2" BSP (M) 3HM, 4, 2" BSP (M), 2" BSP (M) 5HM, 1, 1.1/4" BSP (M), 1" BSP (M) 5HM, 2, 2" BSP (M), 2" BSP (M) 5HM, 3, 2" BSP (M), 2" BSP (M) 5HM, 4, 2.1/2" BSP (M), 2.1/2" BSP (M) 10HM, 1, 1.1/2" BSP (M), 1.1/4" BSP (M) 10HM, 2, 2.1/2" BSP (M), 2.1/2" BSP (M) 10HM, 3, 2.1/2" BSP (M), 2.1/2" BSP (M) 10HM, 4, 3" BSP (M), 3" BSP (M) 15HM, 1, 2" BSP (M), 1.1/2" BSP (M) 15HM, 2, 3" BSP (M), 3" BSP (M) 15HM, 3, DN100 Flanged, DN80 Flanged 15HM, 4, DN100 Flanged, DN100 Flanged 22HM, 1, 2" BSP (M), 1.1/2" BSP (M) 22HM, 2, 3" BSP (M), 3" BSP (M) 22HM, 3, DN100 Flanged, DN100 Flanged 22HM, 4, DN125 Flanged, DN100 Flanged 22SV, 1, 2" BSP (M), 2" BSP (M) 22SV, 2, 3" BSP (M), 3" BSP (M) 22SV, 3, DN100 Flanged, DN100 Flanged 22SV, 4, DN125 Flanged, DN100 Flanged
Marking:: Lowara logo, Xylem services and model code on adhesive label on body
Installation Requirements:: R001 R415
Expiry date:: 31/07/2030
Model:: Model Code: GHV VV / YYYYYYYYYYYY / W / XX / ZZZ GHV - Series of booster - Variable speed Drive EXM or HVL VV denotes the number of pumps installed, and can be replaced with any of the following: 10 = 1 Pump 20 = 2 Pumps 30 = 3 Pumps 40 = 4 Pumps YYYYYYYYYYYY denotes the type of pumps installed and can be replaced with any of the following: 1SV up to 22SV 1HM up to 22HM W denotes the main voltage supply and can be replaced with any of the following: 4=3*400Vac 2=1*230Vac 3=3*230Vac XX -denotes the option and can be replaced with: CP = free voltage contacts Blank = option not chosen ZZZ denotes the option for a pressure switch on suction and can be replaced with: PMA = pressure switch on suction Blank = option not chosen

Manufacturer:: Xylem Service Italia S.r.l

Company Name
Xylem Service Italia S.r.l
Address
Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza
Country
Italy
Phone
0039 0444 707111

View All Listings by this Company

WRAS Approval Number: #250307701

“TP/TPE series 100” single stage centrifugal pumps, incorporating cast iron (with black coloured electrocoating) or stainless-steel bodies and plastic impellers. Maximum working pressure: Cast iron models: 16.0 bar, Stainless steel models: 10.0 bar. Maximum operating temperature: Cast iron models: 60°C, Stainless steel models: 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250307701
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 1½”-2” BSP (M) inlet/outlet. DN40 Flanged inlet/outlet.
Marking:: Grundfos and Grundfos logo, type, model, product no., technical info and manufacturing country on data plate. Grundfos and Grundfos logo on motor. Flow arrow on body.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2030
Model:: TP(E)100 series: TP (E) XX-XXX/2 A or AI or X - F or O - A or I - XXXX Where: TP = pump type with normal Asynchronous motor. TPE = pump type with E-motor (motor with integrated frequency driver). XX = nominal DN size of inlet/outlet ports (25 - 40). XXX = maximum head (dm) (50 - 90). /2 = pole number. A or AI or X = A: Basic version, AI: PN6 flange, X: Special Version. F or O = F: DIN Flanged, O: Union (threaded). A or I = A: Basic Version. Cast iron pump housing and motor stool, I: S/Steel pump housing and motor stool. XXXX = shaft seal type - BQQE or BQBE. YYY = coding for motor. E.g. TP (E) 32-60/2 A-F-A-BQQE-CX1

Product Images

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #250307702

“TPE 2 & TPE3 series” single stage centrifugal pumps, incorporating cast iron (with black coloured electrocoating) or stainless-steel bodies and plastic impellers. Maximum working pressure 10.0 bar. Maximum operating temperature: Cast iron models: 60°C, Stainless steel models: 85°C.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250307702
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Cast iron models: DN32 - DN100 Flanged inlet/outlet. Stainless steel models: DN32 - DN65 Flanged inlet/outlet.
Marking:: Grundfos and Grundfos logo, type, model, product no., technical info and manufacturing country on data plate. Grundfos and Grundfos logo on control unit.
Installation Requirements:: R001 R415
Expiry date:: 31/03/2030
Model:: TPE2/3 series: TPE 2 or 3 (E) XX-XXX S or N - A or AI or X - F - A or I - XXXX - YYY Where: TPE2 = pump type with normal Asynchronous motor. TPE3 = pump type with E-motor (motor with integrated frequency driver). XX = nominal DN size of inlet/outlet ports (cast iron 32 - 100, S/Steel 32 - 65). XXX = maximum head (dm). S or N = S: Built-in differential-pressure and temperature sensor (TPE3 models), N: Without built-in sensor (TPE2 models). A or AI or X = A: Basic version, AI: PN6 flange, X: Special Version. F = DIN Flanged. A or I = A: Basic Version. Cast iron pump housing and motor stool, I: S/Steel pump housing and motor stool. XXXX = shaft seal type - BQQE or BQBE. YYY = coding for motor. E.g. TPE3 100-120 S-X-F-A-BQQE-GAB

Product Images

Approval Holder:: Grundfos Holding A/S

Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

WRAS Approval Number: #250504706

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:: 1610 Pumps
Section Subtitle:: Wholesome water use.
WRAS Approval Number:: 250504706
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.
Marking:: Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.
Installation Requirements:: R001 R415
Expiry date:: 31/05/2030
Proviso:: Open outlet use only.
Model:: 140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:: Panelli S.r.l.

Company Name
Panelli S.r.l.
Address
Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company
Manufacturer:: Panelli S.r.l.

Company Name
Panelli S.r.l.
Address
Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

WRAS Approval Number: #250514306

Section:: 1650 Shower Outlets
Description:: A Range of Shower head(s) and/or shower handset(s).
Conditions of use Type 1 Overhead shower
Basis of Compliance:: Tested to a standard assessed as an appropriate British Standard by WRAS
Installation Requirements:: R001 R040
Expiry date:: 31/05/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
HS170 XXX	Various	1/2" BSP	bar	85 °C	PPI	Body	No				Fixed Head,

Notes & Further Information: XXX Denotes the following: First, second & third XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:: PPI Xiamen Industry Co., Ltd.

Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturers:: PPI XIAMEN INDUSTRY CO LTD

WRAS Approval Number: #250403306

Section:: 1650 Shower Outlets
Description:: A Shower head(s) and/or shower handset(s).
Wall Mounted Shower head
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 30/04/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
VR1000	Chrome	15mm	5 bar	60 °C	Bristan	Body	No	Not applicable	Metal Backnuts	Not Applicable	Fixed Head,

Product Images

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #250704006

Range of in-line Y-patterned strainers with flanged cast iron bodies (blue epoxy powder coated) and stainless steel mesh strainers. The strainers also incorporate a drain plug. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Flange end DN50-DN600 (DN50, 65, 80, 100, 125, 150, 200, 250, 300, 350, 400, 450, 500, 600)
Marking:: Weflo or Weilong, size, PN, flow arrow, DI No. on body; Weflo or Weilong, Fig No. W.P.(Working pressure), Series No. on data label on body
Installation Requirements:: R001
Expiry date:: 31/07/2030
Model:: 7102 Y-Strainer

Manufacturer:: WEFLO Valve Co., Ltd.

Company Name
WEFLO Valve Co., Ltd.
Address
No 789 Chunyang Road, Qingdao National High-Tech Industrial Development Zone, Qingdao, Shandong
Country
China

View All Listings by this Company

WRAS Approval Number: #250408019

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:: 1715 Strainers
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Size: ½” to 2” BSPT (F), NPT (F) or BSPP (F)
Marking:: IVAL logo, size, PN, DN and flow arrow body
Installation Requirements:: R001 R120
Expiry date:: 30/04/2030
Model:: S40

Approval Holder:: IVAL Hydronics UK Ltd

Company Name
IVAL Hydronics UK Ltd
Address
71-75 Shelton Street, Covent Garden, London.
Postcode
WC2H 9JQ
Country
United Kingdom
General Email
info@ival-hydronics.co.uk

View All Listings by this Company

WRAS Approval Number: #250403305

Section:: 1750 Taps
Description:: A Range of Draw off bib tap(s)
Wall Mounted
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 30/04/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
VAL2 BIB C CD	Chrome	1/2" BSP (M)	5.0 bar	65 °C	Bristan	Handle	No	1/2 Turn ceramic disk	Not Applicable	Flow Straightener
VAL2 BIB C 6 CD	Chrome	1/2" BSP (M)	5.0 bar	65 °C	Bristan	Handle	No	1/2 Turn ceramic disk	Not Applicable	Flow Straightener

Product Images

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #241102088

Range of bib taps (nickel plated brass) or (DZR brass) bodies – see models, incorporating a spherical valve to control the flow. The products incorporate single lever operating members. Some models are supplied with lock shields (see models). The spout outlet incorporates a hose union spigot connection with a plastic flow straightener. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:: 1750 Taps
Section Subtitle:: Draw off bib tap(s)
WRAS Approval Number:: 241102088
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: All models can be supplied in BSPT, NPT or BSPP threads, and the sizes are listed with the models:
Size:: ½”(DN15), ¾”(DN20) & 1”(DN25).
Marking:: Valtech & size on body. CR on DZR brass models.
Installation Requirements:: R001
Expiry date:: 30/11/2029
Model:: BT01A-BR-DN15 BT01A- BR -DN20 BT01A- BR -DN25 BT01A-DR-DN15 BT01A-DR-DN20 BT01A-DR-DN25 BT08-L-DN15 BT08-L-DN20 BT08-L-DN25 BT08-LDR-DN15 BT08- LDR DN20 BT08- LDR -DN25

Approval Holder:: Ningbo Valtech Flow Control Co., Ltd

Company Name
Ningbo Valtech Flow Control Co., Ltd
Address
1130 Baizhang Road Ningbo Zhejiang
Country
China

View All Listings by this Company