Directory Search Results

Print List

#241202710

Range of near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
241202710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP M inlet/outlet
Marking:
New Lanbiao logo on label on front of body. Model and product info on label on rear of body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
51023, 51006, 51022-H, 51005-H, 51022-B, 51005-B

Approval Holder:
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Company Name
Taizhou New Lanbiao Intelligent Technology Co.,Ltd
Address
JIAOXI INDUSTRIAL ZONE QINGGANG, YUHUAN TAIZHOU ZHEJIANG
Country
China

View All Listings by this Company

Print This Approval


#241202032

Range of inline water meters with brass bodies (blue or red epoxy coating). The inlet incorporates a plastic strainer. Maximum working pressure 16.0 Bar. Maximum operating temperature 85.0°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) to 2 ½” BSP (M).
Marking:
B METERS logo, model code and other technical information on meter face. B METERS logo on dial cap. Flow arrow & size on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
GMDM – Multi jet super dry water meter with glass window. GMDM-I – Multi jet super dry water meter with inductive 1 lt index for connection to external radio or mbus modules. GMDM-RFM – Multi jet super dray water meter with inductive 1 lt index for connection to external radio or mbus modules. GMDM-R – Multi jet super dry water meter with magnetic index, 1, 10, 100 or 1000 lt for connection with reed sensor pulse output.

Manufacturer:
Bmeters S.r.l
Company Name
Bmeters S.r.l
Address
Via Friuli, 3 33050 Gonars (Udine) Italy

View All Listings by this Company

Print This Approval


#241215012

Range of ultrasonic water meters with brass or stainless steel bodies and plastic or stainless steel transducers. The SC-F models incorporate a spherical valve operated via a motor controlled by computer software. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
SC7 series: ¾” x ¾” BSP (M) (DN15), 1” x 1” BSP (M) (DN20), 1¼” x 1¼” BSP (M) (DN25), 1½” x 1½” BSP (M) (DN32), 2” x 2” BSP (M) (DN40). SC-F series: ¾” x ¾” BSP (M) (DN15), 1” x 1” BSP (M) (DN20), 1¼” x 1¼” BSP (M) (DN25).
Marking:
Weihai Ploumeter Co., Ltd. logo, WEIHAI PLOUMETER CO., LTD, Type (SC& or SC-F), DN size, Q3, Class , MAP, IP, Production date (YYYY.MM), battery expire date (YYYY.MM) and other technical information on meter face. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
SC7 series: Variants: SUS meter body and plastic transducer with communication cable, SUS meter body and plastic transducer without communication cable, Brass meter body and SUS transducer with communication cable, Brass meter body and SUS transducer without communication cable. SC-F series: Variants: Brass meter body and SUS transducer with communication cable, SUS meter body and plastic transducer without communication cable.

Approval Holder:
Weihai Ploumeter Co., Ltd.
Company Name
Weihai Ploumeter Co., Ltd.
Address
No. 576 South of Torch Road, Huancui District, Weihai, Shandong Province
Country
China

View All Listings by this Company
Manufacturer:
Weihai Ploumeter Co., Ltd.
Company Name
Weihai Ploumeter Co., Ltd.
Address
No. 576 South of Torch Road, Huancui District, Weihai, Shandong Province
Country
China

View All Listings by this Company

Print This Approval


#241204028

Range of water meter manifolds with plastic bodies. The inlets incorporate a spherical valve. Models ending in ‘CGDM’ incorporate a single check valve cartridge and models ending in ‘CGDCVDM’ incorporate two, single check valve cartridges however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (F) & 2” BSP (F).
Marking:
Atplas logo on body.
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
MB40403036CGDM Matrix. MB40403034CGDM Matrix. MB40408036CGDM Matrix. MB40408034CGDM Matrix. MB40408036CGDCVDM Matrix. MB40408034CGDCVDM Matrix.

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#241204036

Range of water meter manifolds with plastic bodies, incorporating plastic pushfit inlets and plastic pushfit outlets. The inlets incorporate a spherical ball valve. Models MB40408256DCVDM & MB40408254DCVDM incorporate two single check valve cartridges, all other models incorporate one single check valve however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Atplas logo and flow arrow on inlet and outlet.
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
MB40425256DM 25mm x 25mm MB40425254DM 25mm x 25mm MB40432326DM 32mm x 32mm MB40432324DM 32mm x 32mm MB40408256DM 2” x 25mm MB40408254DM 2” x 25mm MB40408326DM 2” x 32mm MB40408324DM 2” x 32mm MB40408256DCVDM 2” x 25mm MB40408254DCVDM 2” x 25mm

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#241204037

Range of water meter manifolds with plastic bodies, incorporating plastic inlets and gunmetal outlets. The inlets incorporate a spherical ball valve. Models MB40408036CGDCVM & MB40408034CGDCVM incorporate two single check valve cartridges, all other models incorporate one single check valve however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
2” BSP (F)
Marking:
Atplas logo moulded on bridge of manifold
Installation Requirements:
R001 R008
Expiry date:
31/12/2029
Model:
MB40408036CGM MB40408034CGM MB40408036CGDCVM MB40408034CGDCVM

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#241202707

Range of electronic pump controllers with plastic bodies. Maximum working pressure 12.0 Bar. Cold water use only.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
COELBO CONTROL SYSTEM, S.L and technical information on adhesive label on body. Speedmatic on control panel.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
S101083 Speedmatic 101110 MASTER CB (1.1/4” BSP (M)) S101541 Speedmatic 101110 (1.1/4” BSP (M)) S101104 Speedmatic easy CB (1.1/4” BSP (M)) S101542 Speedmatic easy (1.1/4” BSP (M)) S101543 Ecodrive (1” BSP (M)) U471037 Onematic (1.1/4” BSP (M))

Manufacturer:
COELBO CONTROL SYSTEM, S.L.
Company Name
COELBO CONTROL SYSTEM, S.L.
Address
Ctra. De Rubí, 288 Terrassa
Postcode
08228
Country
Spain

View All Listings by this Company

Print This Approval


#241202711

Range of pressure transducers with stainless steel bodies. Maximum working pressure 10.0 Bar, 20 Bar or 40 Bar. Maximum operating temperature 99°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
9mm spigot for insertion into a quick release coupling or 1/4" BSP male.
Marking:
ABB, WRAS, Part number, Pressure range and technical info on adhesive label.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
3KXF004496U0100 - 9mm spigot. 10 bar, 3KXF004496U0200 - 9mm spigot. 10 bar, 3KXF004496U0500 - 9mm spigot. 20 bar, 3KXF004496U0600 - 9mm spigot. 20 bar, 3KXF004496U0700 - 1/4" BSP male. 40 bar, 3KXF004496U0800 - 1/4" BSP male. 40 bar, 3KXF004496U0900 - 9mm spigot. 20 bar.

Approval Holder:
ABB Ltd.
Company Name
ABB Ltd.
Address
Oldends Lane, Stonehouse, Glos.
Postcode
GL10 3TA

View All Listings by this Company

Print This Approval


#241202019

Range of booster sets, incorporating a stainless-steel manifold system and between 2 and 5 pumps depending on model. The booster sets also incorporate spherical valves, non-return valves, pressure switches/sensors and expansion vessels. Maximum working pressure 16.0 Bar. Maximum operating temperature 25.0°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
241202019
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN 50 to DN 200
Marking:
Armstrong and product info on adhesive label on pump.
Installation Requirements:
R001 R415
Expiry date:
31/12/2029
Model:
6800 DE 2-3 Pump VMS 4 2-3 Pump VMS 6 2-5 Pump VMS 10 2-5 Pump VMS 15 2-5 Pump VMS 25 2-4 Pump VMS 40 2-4 Pump VMS 60

Manufacturer:
Armstrong Fluid Technology
Company Name
Armstrong Fluid Technology
Address
1 Woverton Street Manchester M11 2ET
Postcode
M11 2ET
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250304701

Range of shower booster pumps with brass bodies and plastic impellers. The body incorporates a single check valve cartridge, however the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Maximum working pressure: 4.0 bar. Maximum operating temperature: 70°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250304701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Flowflex, flow arrow and BS6282-5 on body.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
SP2B, SP1 (same as SP2B without electronics), SP22S (2 x SP2B connected electronically), SP21S (1 x SP2B & 1 x SP1 connected electrconically), SP2U (SP2B without transformer), SP1U (SP1 without transformer).

Approval Holder:
Flowflex Components Ltd.
Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 824 of 1180

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.