Range of dosing pumps with plastic bodies. Models PM004 & PM005 have a maximum operating pressure of 6.0 bar. All other models have a maximum operating pressure of 10.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2203343

Note:

Only for use with AcquaSIL 2/15 solution.

Size:

Please refer to model.

Marking:

Acqua Brevetti logo (styalised B), serial number and date of manufacture (MM/YY) on body.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/03/2027

Model:

PM004 Minidue: ½” BSP (M). PM005 Minidue: ½” BSP (F). PM005S Minidue: ½” BSP (F). PM0011S Minidue 3/4: ¾” BSP (M). PM007S Minidue 360: ½” BSP (F). PM006S Minidue Filtro: ½” BSP (F).

Approval Holder:

Acqua Brevetti SRL

Company Name

Acqua Brevetti SRL

Address

Via Molveno 8 Mestrino (PD)

Postcode

35035

Country

Italy

Phone

+390498974006

General Email

dpajaro@acquabrevetti.it

View All Listings by this Company

Manufacturer:

Acqua Brevetti SRL

Company Name

Acqua Brevetti SRL

Address

Via Molveno 8 Mestrino (PD)

Postcode

35035

Country

Italy

Phone

+390498974006

General Email

dpajaro@acquabrevetti.it

View All Listings by this Company

Filling link assembly with a nylon body and EPDM ‘O’-rings. The product incorporates a screwdriver operated shut off valve and two check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). The product is also supplied with two screwdriver operated angled spherical valves and a mounting bracket. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1015 Filling Loop

Size:

8-750-731-754 Integral Filling Link Assembly: ½” BSP (M). 7-716-192-281 & 8-716-107-303 Integral Filling links: DN22 ØD manifold connection inlet/outlet.

Marking:

Bosch, flow arrow, Worcester, model and date of manufacture (dial format) on body.

Installation Requirements:

R001

Expiry date:

30/11/2026

Model:

8-750-731-754 (Complete) Integral Filling Link Assembly Consisting of either: 7-716-192-281 or 8-716-107-303 Integral Filling links.

Approval Holder:

Worcester Bosch

Company Name

Worcester Bosch

Address

Cotswold Way Warndon Worcester

Postcode

WR4 9SW

Country

United Kingdom

Phone

+44 1905 752761

General Email

ian.sharp@uk.bosch.com

View All Listings by this Company

Manufacturer:

Worcester Bosch

Company Name

Worcester Bosch

Address

Cotswold Way Warndon Worcester

Postcode

WR4 9SW

Country

United Kingdom

Phone

+44 1905 752761

General Email

ian.sharp@uk.bosch.com

View All Listings by this Company

Range of water filter heads and housings (sumps). The HIS/IN4 models have a chrome plated stainless steel filter head and housing, all other models have a plastic filter head and housing. Ecofast/IN3/QT models incorporate an integral quick turn shut off valve within the filter head to allow the filter housing to be removed. All models are for use with John Guest LLDPE pipe. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1050 Filters and Housings

WRAS Approval Number:

2204075

Note:

R008 does not apply to the HIS/IN4 models.

Size:

⅜" push fit inlet and outlet.

Marking:

Filter heads and housings: Ecofast/IN3/QT: Doulton on filter head. All other models: Doulton on adhesive label on filter sump. Cartridges: Doulton or British Berkefeld (brand of Doulton Water Filters) (see model section) and filter model on top of filter/treatment cartridge.

Installation Requirements:

R001 R008 R120 R150 R170

Expiry date:

30/04/2027

Proviso:

* The product(s) listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.

Model:

Ecofast/IN3/QT. HIP DUO/IN2. HIP/IN1. HIS/IN4. The models can be supplied with any of the filter cartridges as listed below. Except the HIP DUO/IN2 housing which always includes the Ultracarb Filter Candle in one housing and the limescale reduction/ ONINFL cartridge in the other. British Berkefeld brands: Standard Filter Candle*, Sterasyl Filter Candle*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, ATC Supersterasyl*. Doulton brands: Standard Filter Candle*, GOFgravity1*, Super Sterasyl Filter Candle*, Ultra Sterasyl Filter Candle*, GOFgravity2*, Ultra Fluoride Filter Candle*, GOFgravity3*, Ultracarb Filter Candle*, Biotect Ultra Filter Candle*, Ultracarb SI Filter Candle*, Biotect Ultra SI Filter Candle*, ONINFE*, Fluoride Reduction Water Treatment Cartridge, ONINFF, Nitrate Reduction Water Treatment Cartridge, ONINFN, Limescale Reduction Water Treatment Cartridge, ONINFL, Chlorine Reduction Water Treatment Cartridge, ONINFC, Sediment Reduction Water Treatment Cartridge, ONINFS.

Approval Holder:

Fairey Industrial Ceramics Ltd

Company Name

Fairey Industrial Ceramics Ltd

Address

Lower Milehouse Lane Newcastle-Under-Lyme

Postcode

ST5 9BT

Country

United Kingdom

Phone

01782 664445

General Email

jdolman@doulton.com

View All Listings by this Company

Manufacturer:

Fairey Industrial Ceramics Ltd

Company Name

Fairey Industrial Ceramics Ltd

Address

Lower Milehouse Lane Newcastle-Under-Lyme

Postcode

ST5 9BT

Country

United Kingdom

Phone

01782 664445

General Email

jdolman@doulton.com

View All Listings by this Company

Range of DZR brass couplings incorporating EPDM ‘O’-rings for use with Uponor Ecoflex Aqua and Uponor Ecoflex VIP Aqua PE-Xa pipe. For above and below ground use. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112320

Size:

See model

Marking:

Company logo ( U = Uponor) or W (Wipex brand of Uponor) CR mark and production date on body (YY/letter – A would be 1st production run, B would be 2nd production run etc.).

Installation Requirements:

R001 R008

Expiry date:

31/12/2026

Model:

Wipex male coupling: 1018336 (25X3,5-G1), 1018338 (32X4,4-G1), 1018339 (40X5,5-G1 ¼), 1018340 (50X6,9-G1 ¼), 1018341 (63X8,6-G2), 1018342 (75X10,3-G2), 1018343 (90X12,3-G3), 1023170 (110X15,1-G3) Wipex tee: 1018345 (G1-G1-G1), 1018346 (G1 ¼-G1 ¼-G1 ¼), 1018347 (G2-G2-G2), 1018348 (G3-G3-G3) Wipex elbow: 1018350 (G1-G1), 1018351 (G1 ¼-G1 ¼), 1018352 (G2-G2), 1018353 (G3-G3) Wipex joint: 1018355 (G1-G1), 1018356 (G1 ¼-G1 ¼), 1018357 (G2-G2), 1018358 (G3-G3) Wipex flange: 1018359 (F25/4-85/G1), 1018360 (F32/4-100/G1 ¼), 1018362 (F50/4-125/G2), 1018364 (F80/8-160/G3) Wipex reducer: 1018368 (G1 ¼-G1), 1018369 (G1 ½-G1 ¼), 1018371 (G2-G1), 1018372 (G2-G1 ¼), 1018374 (G3-G1), 1018375 (G3-G1 ¼), 1018376 (G3-G2) Wipex jointing equal: 1042970 (25X3,5-25X3,5), 1042974 (32X4,4-32X4,4), 1042979 (40X5,5-40X5,5), 1042982 (63X8,6-63X8,6), 1042983 (50X6,9-50X6,9) Wipex swivel union: 1045455 (G1), 1045456 (G1 ¼-G1), 1045457 (G1 ¼), 1045458 (G2-G1 ¼), 1045459 (G2), 1045460 (G3-G2), 1045461 (G3) Wipex RS adapter: 1047017 (63x8,6 RS2), 1047018 (75x10,3 RS2), 1047019 (90x12,3 RS3), 1047020 (110x15,1 RS3)

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

>B< Press range of stainless-steel SUS316L fittings for use with 316L stainless steel tube manufactured to EN10312. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201312

Size:

Please refer to model.

Marking:

Conex logo (B) and size on body

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

PS4001G – Male Bend PS4001G0150400 – 15 x ½” PS4001G0180400 – 18 x ½” PS4001G0180600 – 18 x ¾” PS4001G0220600 – 22 x ¾” PS4001G0280800 – 28 x 1” PS4001G0351000 – 35 x 1-1/4” PS4001G0421200 – 42 x 1-1/2” PS4001G0541600 – 54 x 2” PS4002G – Female Bend PS4002G0150400 – 15 x ½” PS4002G0180400 – 18 x ½” PS4002G0180600 – 18 X ¾” PS4002G0220600 – 22 x ¾” PS4002G0280800 – 28 x 1” PS4002G0351000 – 35 x 1-1/4” PS4002G0421200 – 42 x 1-1/2” PS4002G0541600 – 54 x 2” PS4090G – Female Street Elbow PS4090G0150400 – 15 x ½” PS4090G0180400 – 18 x ½” PS4090G0220400 – 22 x ½” PS4090G0220600 – 22 x ¾” PS4090G0280800 – 28 x 1” PS4090G0351000 – 35 x 1-1/4” PS4092G – Male Elbow 90° PS4092G0150400 – 15 x ½” PS4092G0180400 – 18 x ½” PS4130G – Female Tee PS4130G0150415 – 15 x 15 x ½” PS4130G0180418 – 18 x 18 x ½” PS4130G0180618 – 18 x 18 x ¾” PS4130G0220422 – 22 x 22 x ½” PS4130G0220622 – 22 x 22 x ¾” PS4130G0280428 – 28 x 28 x ½” PS4130G0280628 – 28 x 28 x ¾” PS4130G0280828 – 28 x 28 x 1” PS4130G0350435 – 35 x 35 x ½” PS4130G0350635 – 35 x 35 x ¾” PS4130G0351035 – 35 x 35 x 1-1/4” PS4130G0420442 – 42 x 42 x ½” PS4130G0420642 – 42 x 42 x ¾” PS4130G0540454 – 54 x 54 x ½” PS4130G0540654 – 54 x 54 x ¾” PS4130G0541654 – 54 x 54 x 2” PS4130G0760676 – 76 x 76 x ¾” PS4130G0761676 – 76 x 76 x 2” PS4130G0890689 – 89 x 89 x ¾” PS4130G0891689 – 89 x 89 x 2” PS4130G10806108 – 108 x 108 x ¾” PS4130G10816108 – 108 x 108 x 2” PS4243G – Male Straight Connector PS4243G0150400 – 15 x ½” PS4243G0180400 – 18 x ½” PS4243G0180600 – 18 x ¾” PS4243G0220400 – 22 x ½” PS4243G0220600 – 22 x ¾” PS4243G0220800 – 22 x 1” PS4243G0280600 – 28 x ¾” PS4243G0280800 – 28 x 1” PS4243G0351000 – 35 x 1-1/4” PS4243G0421200 – 42 x 1-1/2” PS4243G0541600 – 54 x 2” PS4243G0762000 – 76 x 2-1/2” PS4243G0892400 – 89 x 3” PS4243G1083200 – 108 – 4” PS4270G – Female Straight Connector PS4270G0150400 – 15 x ½” PS4270G0180400 – 18 x ½” PS4270G0180600 – 18 x ¾” PS4270G0220400 – 22 x ½” PS4270G0220600 – 22 x ¾” PS4270G0220800 – 22 x 1” PS4270G0280600 – 28 x ¾” PS4270G0280800 – 28 x 1” PS4270G0351000 – 35 x 1-1/4” PS4270G0421200 – 42 x 1-1/2” PS4270G0541600 – 54 x 2” PS4270G0762000 – 76 x 2-1/2” PS4270G0892400 – 89 x 3” PS4275 – Slip Coupler PS4275 0150000 – 15MM PS4275 0180000 – 18MM PS4275 0220000 – 22MM PS4275 0280000 – 28MM PS4275 0350000 – 35MM PS4275 0420000 – 42MM PS4275 0540000 – 54MM PS4275 0760000 – 76MM PS4275 0890000 – 89MM PS4275 1080000 – 108MM PS4330G – Female Straight Adaptor PS4330G0150400 – 15 x ½” PS4330G0150600 – 15 x ¾” PS4330G0180400 – 18 x ½” PS4330G0180600 – 18 x ¾” PS4330G0220600 – 22 x ¾” PS4330G0220800 – 22 x 1” PS4330G0280800 – 28 x 1” PS4330G0351000 – 35 x 1-1/4” PS4330G0421200 – 42 x 1-1/2” PS4330G0541600 – 54 x 2” PS4331G – Male Straight Adaptor PS4331G0150400 – 15 x ½” PS4331G0180400 – 18 x ½” PS4331G0220600 – 22 x ¾” PS4331G0280800 – 28 x 1! PS4331G0351000 – 35 x 1-1/4” PS4331G0421200 – 42 x 1-1/2” PS4331G0541600 – 54 x 2” PS4355 – Flat Face Union PS4355 0150600 – 15 x ¾” PS4355 0180600 – 18 x ¾” PS4355 0220600 – 22 x ¾” PS4355 0220800 – 22 x 1” PS4355 0280800 – 28 x 1” PS4355 0281000 – 28 x 1-1/4” PS4355 0351200 – 35 x 1-1/2” PS4471G – Wallplate Elbow PS4471G0150400 – 15 x ½” PS4471G0180400 – 18 x ½” PS4471G0220600 – 22 x ¾” PS4471G0280800 – 28 x 1” PS5001 – Street Bend PS5001 0150000 – 15MM PS5001 0180000 – 18MM PS5001 0220000 – 22MM PS5001 0280000 – 28MM PS5001 0350000 – 35MM PS5001 0420000 – 42MM PS5001 0540000 – 54MM PS5001 0760000 – 76MM PS5001 0890000 – 89MM PS5002 – Bend PS5002 0150000 – 15MM PS5002 0180000 – 18MM PS5002 0220000 – 22MM PS5002 0280000 – 28MM PS5002 0350000 – 35MM PS5002 0420000 – 42MM PS5002 0540000 – 54MM PS5002 0760000 – 76MM PS5002 0890000 – 89MM PS5002 1080000 – 108MM PS5030 – 90 Street Bend PS5030 0150000 – 15MM PS5030 0180000 – 18MM PS5030 0220000 – 22MM PS5030 0280000 – 28MM PS5030 0350000 – 35MM PS5030 0420000 – 42MM PS5030 0540000 – 54MM PS5040 – 45 Street Bend PS5040 0150000 – 15MM PS5040 0180000 – 18MM PS5040 0220000 – 22MM PS5040 0280000 – 28MM PS5040 0350000 – 35MM PS5040 0420000 – 42MM PS5040 0540000 – 54MM PS5040 0760000 – 76MM PS5040 0890000 – 89MM PS5040 1080000 – 108MM PS5041 – Obtuse Bend PS5041 0150000 – 15MM PS5041 0180000 – 18MM PS5041 0220000 – 22MM PS5041 0280000 – 28MM PS5041 0350000 – 35MM PS5041 0420000 – 42MM PS5041 0540000 – 54MM PS5041 0760000 – 76MM PS5041 0890000 – 89MM PS5041 1080000 – 108MM PS5087 – Cross Short PS5087 0150000 – 15MM PS5087 0180000 – 18MM PS5087 0220000 – 22MM PS5087 0280000 – 28MM PS5130 – Equal Tee PS5130 0151515 – 15MM PS5130 0181818 – 18MM PS5130 0222222 – 22MM PS5130 0282828 – 28MM PS5130 0353535 – 35MM PS5130 0424242 – 42MM PS5130 0545454 – 54MM PS5130 0767676 – 76MM PS5130 0898989 – 89MM PS5130 10800EQ – 108MM PS5130 – Reduced Branch Tee PS5130 0181518 – 18 x 15 x 18 PS5130 0221522 – 22 x 15 x 22 PS5130 0221822 – 22 x 18 x 22 PS5130 0281528 – 28 x 15 x 28 PS5130 0281828 – 28 x 18 x 28 PS5130 0282228 – 28 x 22 x 28 PS5130 0351535 – 35 x 15 x 35 PS5130 0351835 – 35 x 18 x 35 PS5130 0352235 – 35 x 22 x 35 PS5130 0352835 – 35 x 28 x 35 PS5130 0422242 – 42 x 22 x 42 PS5130 0422842 – 42 x 28 x 42 PS5130 0423542 – 42 x 35 x 42 PS5130 0542254 – 54 x 22 x 54 PS5130 0542854 – 54 x 28 x 54 PS5130 0543554 – 54 x 35 x 54 PS5130 0544254 – 54 x 42 x 54 PS5130 0762276 – 76 x 22 x 76 PS5130 0762876 – 76 x 28 x 76 PS5130 0763576 – 76 x 35 x 76 PS5130 0764276 – 76 x 42 x 76 PS5130 0765476 – 76 x 54 x 76 PS5130 0892289 – 89 x 22 x 89 PS5130 0892889 – 89 x 28 x 89 PS5130 0893589 – 89 x 35 x 89 PS5130 0894289 – 89 x 42 x 89 PS5130 0895489 – 89 x 54 x 89 PS5130 0897689 – 89 x 76 x 89 PS5130 10822108 – 108 x 22 x 108 PS5130 10828108 – 108 x 28 x 108 PS5130 10835108 – 108 x 35 x 108 PS5130 10842108 – 108 x 42 x 108 PS5130 10854108 – 108 x 54 x 108 PS5130 10876108 – 108 x 76 x 108 PS5130 10889108 – 108 x 89 x 108 PS5230D – Flange Adapter PS5230D0760000 – 76MM PS5230D0890000 – 89MM PS5230D1080000 – 108MM PS5243 – Fitting Reducer PS5243 0181500 – 18 x 15 PS5243 0221500 – 22 x 15 PS5243 0221800 – 22 x 18 PS5243 0281500 – 28 x 15 PS5243 0281800 – 28 x 18 PS5243 0282200 – 28 x 22 PS5243 0351800 – 35 x 18 PS5243 0352200 – 35 x 22 PS5243 0352800 – 35 x 28 PS5243 0422800 – 42 x 28 PS5243 0423500 – 42 x 35 PS5243 0542800 – 54 x 28 PS5243 0543500 – 54 x 35 PS5243 0544200 – 54 x 42 PS5243 0764200 – 76 x 42 PS5243 0765400 – 76 x 54 PS5243 0894200 – 89 x 42 PS5243 0895400 – 89 x 54 PS5243 0897600 – 89 x 76 PS5243 1085400 – 108 x 54 PS5243 1087600 – 108 x 76 PS5243 1088900 – 108 x 89 PS5270 – Coupler PS5270 0150000 – 15MM PS5270 0180000 – 18MM PS5270 0220000 – 22MM PS5270 0280000 – 28MM PS5270 0350000 – 35MM PS5270 0420000 – 42MM PS5270 0540000 – 54MM PS5270 0760000 – 76MM PS5270 0890000 – 89MM PS5270 1080000 – 108MM PS5301 – Stop End PS5301 0150000 – 15MM PS5301 0180000 – 18MM PS5301 0220000 – 22MM PS5301 0280000 – 28MM PS5301 0350000 – 35MM PS5301 0420000 – 42MM PS5301 0540000 – 54MM PS5301 0760000 – 76MM PS5301 0890000 – 89MM PS5301 1080000 – 108MM

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

ZK International Group

Company Name

ZK International Group

Address

NO.678 Dingxiang Road, Binhai Garden,Economic and Technological Development Zone, Wenzhou, Zhejiang

Country

China

General Email

View All Listings by this Company

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). The AF14 and AF15 tap connector models incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204071

Size:

See model

Marking:

“DOZ” and Size on fitting body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

AF01 couplings-cxc: 6 - 54mm compression. AF01B repair couplings-cxc: 6 - 54mm compression. AF01R reducing couplings cxc: 10 x 8mm compression, 12 x 8mm compression, 15 x 8mm compression, 12 x 10mm compression, 15 x 10mm compression, 15 x 12mm compression, 18 x 12mm compression, 16 x 15mm compression, 22 x 15mm compression, 28 x 15mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression. AF02P female adaptors-parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ⅜" BSP (F), 10mm compression, x ½" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x ¾” BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF03T male adaptors-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P male adaptors-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P extended male adaptors-CxMI: 10mm compression, x ⅜" BSP (M), 12mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M). AF04 tank connectors-lug style: 10 - 54mm compression. AF04N tank connectors-nut style: 10 - 54mm compression. AF05 elbows 90 degree-CxC: 6 - 54mm compression. 8 x 6mm compression, 10 x 8mm compression, 12 x 10mm compression, 15 x 12mm compression, 18 x 15mm compression, 22 x 15mm compression, 22 x 18mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression, AF06T male elbows-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1¼" BSP (M), 42mm compression, x 1½" BSP (M), 54mm compression, x 2" BSP (M). AF06P male elbows-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF07 female elbows-CxFI parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 8mm compression, x ⅜" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ½" BSP (F), 10mm compression, x ⅜" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x ¾" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x 1-¼" BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF08 wallplate elbows-CxFI: 12mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x ½" BSP (F), 28mm compression, x 1" BSP (F). AF08 equal tees-CxCxC: 6 - 54mm compression. AF08R reducing tees-CxCxC: 15 x 15 x 10mm compression, 15 x 15 x 22mm compression, 22 x 15 x 15mm compression, 22 x 15 x 22mm compression, 22 x 22 x 15mm compression, 22 x 22 x 28mm compression, 28 x 15 x 28mm compression, 28 x 22 x 28mm compression, 28 x 22 x 22mm compression, 28 x 28 x 15mm compression, 28 x 28 x 22mm compression, 35 x 35 x 15mm compression, 35 x 35 x 22mm compression, AF09 threaded centre teesCxCxFI: 15mm compression, x 15mm compression, x ¼" BSP (F), 15mm compression, x 15mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x 1" BSP (F). AF10 threaded end tees CxFIxC: 15mm compression, x ½" BSP (F) x 15mm compression, 22mm compression, x ¾" BSP (F) x 22mm compression, AF12 stopends-C: 6 - 54mm compression. AF14 straight tap connectors: 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F). AF15 bent tap connectors: 15mm compression, x ½" BSP (F). Models added January 2026 CL35032H048G0 Olive P/R 8MM BRASS OLIVES PK10 8mm CL35032H049G0 Olive P/R 10MM BRASS OLIVES PK10 10mm CL35032H050G0 Olive P/R 15MM BRASS OLIVES PK10 15mm CL35032H051G0 Olive P/R 22MM BRASS OLIVES PK10 22mm CL35032H052G0 Olive PR 28MM BRASS OLIVES PK10 28mm

Approval Holder:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Manufacturer:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Dual flush WC outlet valve with an ABS body, incorporating a silicone seal and internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2203327

Size:

2” BSP (M)

Marking:

WRAS, ING, B421, & CE on body.

Installation Requirements:

R001 R571 R581 R582

Expiry date:

31/03/2027

Model:

B421

Approval Holder:

Xiamen Ing Sanitary Fittings Ltd.

Company Name

Xiamen Ing Sanitary Fittings Ltd.

Address

2/F, (2#, Factory B), No. 503West Jinyuan 2nd Road Jimei District Xiamen

Country

China

Phone

0086 0592 5669770 803

General Email

sales2@ing-sanitary.com

View All Listings by this Company

Manufacturer:

Xiamen Ing Sanitary Fittings Ltd.

Company Name

Xiamen Ing Sanitary Fittings Ltd.

Address

2/F, (2#, Factory B), No. 503West Jinyuan 2nd Road Jimei District Xiamen

Country

China

Phone

0086 0592 5669770 803

General Email

sales2@ing-sanitary.com

View All Listings by this Company

WC dual flush drop valve comprising of a plastic body, silicone seating washer and an internal overflow. The valve is operated via a push button assembly (not included) for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2204300

Size:

60.56mm Ø

Marking:

Kohler on body

Installation Requirements:

R001 R571 R580

Expiry date:

30/04/2027

Model:

1360140

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of plate heat exchanger with stainless steel bodies. Maximum working pressure10 bar. Maximum operating temperature 100°C.

Section:

1350 Heat Exchangers

Size:

½”BSP(M) secondary x ¾”BSP(M) primary Ø 16mm holes on inlets and outlets

Marking:

G20 Engineering logo, model number, production date WW/YY etched on body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Plate heat exchanger – Type PEP15440A01 (with insert M5) PEP15440A01-20 PEP15440A01-18 PEP15440A01-16 PEP15440A01-14 PEP15440A01-12 PEP15440A01-10 Plate heat exchanger – Type PEP15440B01 (with 2 G ½’ fitting and 2 G ¾’ fitting) PEP15440B01-20 PEP15440B01-18 PEP15440B01-16 PEP15440B01-14 PEP15440B01-12 PEP15440B01-10

Approval Holder:

G20 ENGINEERING s.r.l.

Company Name

G20 ENGINEERING s.r.l.

Address

Localita Campogrande 13- 29013 Carpaneto P.no (PC)

Country

Italy

View All Listings by this Company

‘POD’ range of indirect and direct heat interface units providing space heating and instantaneous hot water. The heat transfer is generated via plate heat exchangers. The domestic hot water (DHW) circuit incorporates an adjustable temperature mixing valve. The indirect models incorporate an expansion vessel (on the CW inlet of the DHW circuit) and a pressure relief valve set at 3.0 bar (on the space heating circuit). The indirect models only are supplied with a temporary filling loop, which comprises of a stainless steel braided EPDM lined flexible hose assembly and a lever operated spherical valve for connection to the primary circuit. The angled cold water inlet incorporates an isolation valve and a branch to connect to the filling loop, which includes a double check valve assembly (verified by test, suitable for backflow protection against Fluid Category 3). Maximum working pressure for indirect units: Primary circuit: 16.0 bar. Space heating: 2.5 bar. Secondary circuit (DHW): 10.0 bar. Maximum working pressure for direct units: Primary circuit: 10.0 bar. Space heating: 10.0 bar. Secondary circuit (DHW): 10.0 bar. Maximum operating temperature for domestic hot water 65°C. Maximum operating temperature for central heating and primary circuit 85°C.

Section:

1350 Heat Exchangers

Size:

22mm copper pipe connection.

Marking:

Ideal Heating badge and model on adhesive label on front casing. Manufacturer, serial number, model number, pressure rating and other technical information on data label within appliance.

Installation Requirements:

R001 R140 R360

Expiry date:

30/04/2027

Model:

POD range of indirect (i prefix) and direct (d prefix) HIU: i305, i405, i505, i605, i705, d30, d40, d50, d60. All models can have the following suffixes to denote the inclusion of a heat meter: HWM for a hard wired MBUS and WLM for a wireless MBUS.

Approval Holder:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company

Manufacturer:

Ideal Boilers Ltd

Company Name

Ideal Boilers Ltd

Address

PO Box 103 National Avenue Hull East Yorkshire

Postcode

HU5 4JN

Country

United Kingdom

Phone

07775659359

General Email

ben.higinbotham@groupe-atlantic.co.uk

View All Listings by this Company