Directory Search Results

Print List

#2010069

Range of 1, 2 or 3 outlet concealed wall mounted bar type thermostatic mixer valve (various finishes) incorporating a quarter turn ceramic disc headwork controlling the flow using a single lever or cross top operating member depending on the model type. The temperature is controlled independently via a thermostatic cartridge also using a cross top or single lever type operating member (Depending on model). Inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. some models are supplied with a shower handset and hose. Maximum working pressure 5.0 bar. Maximum operating temperature 65.0°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2010069
Size:
¾” BSP (F)
Marking:
Swadling on operating member. “S” logo on shower hose nut.
Installation Requirements:
R001 R040
Expiry date:
31/10/2025
Model:
Concealed Thermostatic Valve - 1 Outlet Illustrious Range: 9100XX, 9103XX, 9106XX, 9109XX & 9101XX, 9102XX. Engineer Range: 8100XX. Invincible Range: 7100XX, 7109XX, 7110XX, 7119XX. Absolute Range: 6100XX. Concealed Thermostatic Valve - 2 Outlet Illustrious Range: 9200XX, 9203XX, 9206XX, 9209XX & 9201XX, 9202XX. Engineer Ranges: 8200XX. Invincible Range: 7200XX, 7209XX, 7210XX, 7219XX. Absolute Range: 6200XX. Concealed Thermostatic Valve - 2 Outlet Plus Extension Manifold (Including Handshower & Hose) Absolute Range:6250XX/Metal. Concealed Thermostatic Valve - 3 Outlet Illustrious Range: 9300XX, 9303XX, 9306XX, 9309XX & 9301XX, 9302XX. Engineer Range: 8300XX. Invincible Range: 7300XX, 7309XX, 7310XX, 7319XX. Absolute Range: 6300XX. Concealed Thermostatic Valve - 3 Outlet Plus Extension Manifold (Including Handshower & Hose) Absolute Range: 6350XX/Metal. XX Denotes finish. Available In Finishes As Below: NP = Nickel Plate NB = Nickel Brushed CP = Chrome Plated MG = Gold Plated LB = Living Brass GB = Gold Brushed BB = Brushed Brass AB = Aged Brass
Product Images

Approval Holder:
Matki Plc.
Company Name
Matki Plc.
Address
Churchward Road Yate Bristol
Postcode
BS37 5PL

View All Listings by this Company
Manufacturer:
Swadling Brassware
Company Name
Swadling Brassware
Address

View All Listings by this Company

Print This Approval


#2011332

Range of thermostatic mixing valves with between 1 and 6 outlets. Flow is controlled by a solenoid valve and temperature is thermostatically controlled. Models Mira Activate 1.1903.091, 1.1903.092 & 1.1903.093 incoporate a built-in pump which is set 12 litres per minute. The valves can be supplied with a shower rail, hose, handshower and/or ceiling mounted shower outlet. The inlets of the valves incorporate an isolation valve, stainless steel strainer and a single check valve cartridge however, the complete assembly has not been tested to demonstrate it provides adequate backflow protection. Valves with ‘HP’ in model have a maximum working pressure of 5.0 bar. All other valves have a maximum working pressure of 1.0 bar. Maximum operating temperature 50°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2011332
Size:
15mm push fit connection
Marking:
Mira Showers & other technical information on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
Valve only: Kohler UK 2 outlet HP valve (28209W-NA) Kohler UK 3 outlet HP valve (28210W-NA) Kohler UK 4 outlet HP valve (28211W-NA) Kohler UK 6 outlet HP valve (28212W-NA) Valve supplied with shower outlets: Mira Activate single outlet HP ceiling fed (1.1903.086) Mira Activate single outlet HP rear fed (1.1903.087) Mira Activate dual outlet HP ceiling fed (1.1903.088) Mira Activate dual outlet HP rear fed (1.1903.089) Mira Activate dual outlet HP rear fed (1.1903.090) Mira Activate single outlet pumped rear fed (1.1903.091) Mira Activate dual outlet pumped ceiling fed (1.1903.092) Mira Activate dual outlet pumped rear fed (1.1903.093)
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#2012910

Range of wall mounted bar type thermostatic shower mixers (chromium plated brass) incorporating a ceramic disc headworks controlling the flow. Temperature is controlled via a thermostatic cartridge with single lever type operating members which incorporate manual override buttons. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset, riser rail and soap dish. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2012910
Size:
15mm compression
Marking:
Methven on top of body. DTC37 (brand of Methven) on rear of body.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
KHCTSEFCP KLFCTSEFCP KLFCTS KRLFCTSEFLP KRCTSEFCP
Product Images

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#2012919

Wall mounted, concealed, thermostatic shower valve with brass body, incorporating half turn ceramic disc headworks controlling and diverting the flow, the temperature is controlled independently via a thermostatic cartridge, with dome type operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset, riser rail and overhead shower. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2012919
Size:
15mm compression
Marking:
Aqualisa on face plate
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
AQSQDCV2

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2012920

Wall mounted, concealed, thermostatic shower valve with brass body. Incorporating a quarter turn ceramic disc headwork which controls the flow, temperature is controlled independently via a thermostatic cartridge with cube type operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2012920
Size:
15mm compression
Marking:
Aqualisa on face plate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
AQSQDCV1

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2012921

Wall mounted, concealed, thermostatic shower valve with brass body, incorporating half turn ceramic disc headworks controlling and diverting the flow, the temperature is controlled independently via a thermostatic cartridge, with single lever operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset, riser rail and overhead shower. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2012921
Size:
15mm compression
Marking:
Aqualisa on face plate
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
AQRNDCV2
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2012922

Wall mounted, concealed, thermostatic shower valve with brass body. Incorporating a quarter turn ceramic disc headwork which controls the flow, temperature is controlled independently via a thermostatic cartridge with lever type operating members. The inlets incorporate a stainless-steel strainer and an approved check valve cartridge; however, the complete products have not been fully tested to demonstrate that they provide backflow protection. Products are supplied with a shower hose, shower handset and riser rail. Maximum working pressure 5.0 bar. Maximum operating temperature 80°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2012922
Size:
15mm compression
Marking:
Aqualisa on face plate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
AQRNDCV1

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#2012900

Wall mounted bar type thermostatic shower valve (chromium plated brass) incorporating quarter turn ceramic disc headwork controlling the flow with dome type operating members. The temperature is controlled independently via a thermostatic cartridge with single lever type operating member and manual override button. Both inlets incorporate stainless steel strainers and an approved single check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2012900
Size:
15mm compression
Marking:
Alterna on body
Installation Requirements:
R001 R040
Expiry date:
31/12/2025
Model:
ALT10031
Product Images

Approval Holder:
Saint-Gobain Building Distribution Ltd
Company Name
Saint-Gobain Building Distribution Ltd
Address

View All Listings by this Company

Print This Approval


#2010336

Range of under-counter or counter-top drinking water dispensers delivering still ambient, still chilled & sparkling water. HygienePlus®. Models incorporate a built-in filter system. The flow is controlled by a solenoid valve which is either operated by a touch or a touch pad. The water is dispensed via a tap arrangement on under-counter versions or an integrated outlet on counter-top versions. The inlets incorporate an approved check valve cartridge assembly however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Cold water use only.

Section:
2420 Water Coolers
Section Subtitle:
Drinking.
WRAS Approval Number:
2010336
Size:
¾” BSP (F).
Marking:
Brita, model and technical information on side or top body.
Installation Requirements:
R001 R150 R160 R170
Expiry date:
31/10/2025
Model:
VIVREAU Extra 50. VIVREAU Extra 50 HygienePlus®. VIVREAU Extra 85. VIVREAU Extra 85 HygienePlus®. VIVREAU Top 50. VIVREAU Top 50 HygienePlus®. VIVREAU Top 85. VIVREAU Top 85 HygienePlus®.
Product Images

Approval Holder:
Brita GmbH
Company Name
Brita GmbH
Address
Heinrich Hertz Strasse 4 D-65232 Taunusstein
Country
Germany
Phone
+49 6128 746 0
General Email
info@brita.net

View All Listings by this Company

Print This Approval


#2111704

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (either stainless steel or brass bodies in a variety of finishes). Flow is controlled via two solenoid valves (housed in a control box) activated via an infra-red sensor, the inlets to the control box incorporate stainless steel strainers. The temperature is controlled independently via a ceramic cartridge with a dome type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2111704
Size:
Control box: ⅜” BSP (M). Tap: Braided stainless steel braided, PEX lined hoses with 10mm spigot end connections
Marking:
VOLA on operating member
Installation Requirements:
R001 R006 R007 R010
Expiry date:
30/11/2026
Model:
VOLA HV1E-XX Stainless steel. Where XX denotes the surface finish: 40 = Stainless Steel, 61 = Brushed Black, 64 = Brushed Copper, 70 = Brushed Gold, 71 = Brushed Dark Copper. VOLA HV1E-XX Brass. Where XX denotes the surface finish: 02 = Grey, 04 = Blue, 05 = Orange, 06 = Light Green, 08 = Yellow, 09 = Dark Grey, 12 = Mocca, 14 = Bright Red, 15 = Dark Blue, 16 = Chrome, 17 = Gloss Black, 18 = White, 19 = Natural Brass, 20 = Brushed Chrome, 21 = Carmine Red, 25 = Pink, 27 = Matt Black, 28 = Matt White, 60 = Black, B61 = Brushed Black, 62 = Deep Black, 63 = Copper, B64 = Brushed Copper, 65 = Gold, 66 = Dark Gold, 68 = Nickel, B70 = Brushed Gold.

Approval Holder:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company
Manufacturer:
Vola A/S
Company Name
Vola A/S
Address
Lunavej 2 Horsens
Postcode
8700
Country
Denmark
Phone
+4576284846
General Email
mk@vola.dk

View All Listings by this Company

Print This Approval


#2011069

Range of wall mounted, two hole, single outlet (fixed) mains electric or battery controlled tap assemblies (chromium plated brass) incorporating approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection . The flow is controlled via a solenoid valve activated via an infra-red sensor. The inlet to the solenoid incorporates a stainless-steel strainer. The tap is supplied with spherical valves for both hot and cold inlets. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2011069
Size:
½” Male BSP.
Marking:
Model number and date (WW/YY) on underside of tap. INTA on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2025
Model:
Mains Operated: HTMWMMCP HTMWMMRS - Removable Spout Battery Operated: HTMWMBRS – Removable Spout HTMWMBCP
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company
Manufacturer:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#2010046

Range of deck mounted, three-hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a ceramic cartridge headwork and manually operated diverter valve, both models RAKSOR3013C and RAKPOR3013C use single lever operating members and model RAKAMA3013C has a dome type operating member. The spouts incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0653 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
WRAS Approval Number:
2010046
Size:
Stainless steel braided NBR lined hose assemblies incorporating ½” BSP captive nut end connections
Marking:
Rak Ceramics on spout
Installation Requirements:
R001 R006 R007 R010 R040
Expiry date:
31/10/2025
Model:
RAKAMA3013C RAKISH3013C RAKPOR3013C RAKSOR3013C
Product Images

Approval Holder:
RAK CERAMICS UK LTD
Company Name
RAK CERAMICS UK LTD
Address
Paris House Frenchmans Road Petersfield Hampshire
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2009309

Range of three hole, single outlet (fixed) combination tap assembly (chromium plated brass). Incorporating ceramic cartridge headworks, single lever operating members & manually operated diverter to shower outlet. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0653 Combination Tap Assemblies
Section Subtitle:
Three hole tap(s) with a single outlet and a fixed spout, incorporating a manual diverter to a shower outlet.
WRAS Approval Number:
2009309
Size:
Stainless steel braided PEX lined hose assembly incorporating 3/8” captive nut end connections with ½” BSP (M) inlet adaptors.
Marking:
Gessi on operating member.
Installation Requirements:
R001 R009 R010 R040
Expiry date:
30/09/2025
Model:
Art. 18643 Via Tortona
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#2102803

Spring loaded, resilient trim, in-line check valve cartridges with plastic body. For insertion into pipes and fittings with specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2102803
Size:
DN8, DN10 & DN15.
Marking:
Gulf or Tumedei, flow arrow and model name on body
Installation Requirements:
R001
Expiry date:
28/02/2026
Model:
OV8-6844, OF10-2933 & OV15-2914

Approval Holder:
Gulf Rubber Group - Tumedei SpA
Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

Print This Approval


#2102805

OV & OF ranges of spring loaded, resilient trim, in-line check valve cartridges within a plastic housing. For insertion in pipes and fittings with specifically sized bores. Maximum working pressure 16.0 bar. Models OF10/DN8 - 31.4208.0 & OF10/DN8-EPDM - 31.0059 have a maximum operating temperature of 60°C. Model OV10/DN8 – 31.4210.0 has a maximum operating temperature of 85°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2102805
Size:
DN8
Marking:
Neoperl, flow arrow and size on body.
Installation Requirements:
R001
Expiry date:
28/02/2026
Model:
OV10/DN8 - 31.4210.0. OF10/DN8 - 31.4208.0. OF10/DN8-EPDM – 31.0059.0.

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2106031

Spring loaded resilient trim, in-line check valve cartridge with plastic guides and stem and EPDM seals within a plastic housing. For insertion into pipes or fittings with specifically dimensioned bores. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
2106031
Marking:
Korie, 1st 4 digits of product code, (e.g. OF14) and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
OF14200000 DN14, OF15200000 DN15, OF20200000 DN20, OF25200000 DN25.
Product Images

Approval Holder:
Yuhuan Korie Plastic Factory
Company Name
Yuhuan Korie Plastic Factory
Address
Technology Industry Functional Area, Chumen Village Yuhuan
Country
Zhejiang

View All Listings by this Company

Print This Approval


#2012364

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body, compression models are nickle plated. A drain port is provided between the cartridges. Compression models are to be used with copper pipe to EN1057. Maximum working pressure 16.0 Bar. Maximum operating temperature for the Hattersley Fig 250W range 85°C. Maximum operating temperature of the Hattersley Fig 250CW is 60°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2012364
Size:
Hattersley Fig 250W– DN15, DN20, DN25, DN32, DN40, DN50. Hattersley Fig 250CW – 15mm, 22mm, 28mm compression.
Marking:
Hattersley Logo, flow arrow, PN, DN and CR mould on body
Installation Requirements:
R001
Expiry date:
31/12/2025
Model:
Hattersley Fig 250W & 250CW double check valve assemblies

Approval Holder:
Hattersley
Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


#2010390

Range of non-verifiable double check valve assemblies with DZR brass bodies, incorporating two spring loaded, resilient trim in-line check valve cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2010390
Marking:
TPK, Size, CR, flow arrow and date of manufacturer (MM-YY) on body.
Installation Requirements:
R001
Expiry date:
31/10/2025
Model:
571458 – 28mm compression 274337 – 42mm compression

Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval


#2101015

Range of single hole bidet taps with brass bodies (various finishes) and swivel spout outlets. The products incorporate a ceramic cartridge headwork with single lever operating members. The spout outlets incorporate a plastic aerator and the products are supplied with a lever operated waste. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
2101015
Note:
No testing has been performed on the pop-up waste.
Size:
Stainless steel braided, PEX lined flexible hose assemblies with a 3/8” BSP captive nut end connection.
Marking:
Hansgrohe on operating member.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2026
Model:
71210XXX Vernis Blend with pop-up waste. 71211XXX Vernis Shape with pop-up waste. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2107700

Range of ceramic cartridge headworks with plastic bodies and NBR ‘O’-rings for insertion into specifically dimensioned tap assemblies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2107700
Size:
Ø 35mm
Marking:
Sedal logo, Sedal, model number and date of manufacture (DD/MM/YY) on body.
Installation Requirements:
R001
Expiry date:
31/07/2026
Model:
M.M.35 S/D CHR. M.M.35 C/D CHR.

Approval Holder:
Kaiping Sedal Tap Components Co., Ltd.
Company Name
Kaiping Sedal Tap Components Co., Ltd.
Address
Floor 1, 3 and Part of Floor 2, No. 2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong Province
Country
China
Phone
+86-750-2728599
General Email
tony@ksedal.com

View All Listings by this Company
Manufacturer:
Kaiping Sedal Tap Components Co., Ltd.
Company Name
Kaiping Sedal Tap Components Co., Ltd.
Address
Floor 1, 3 and Part of Floor 2, No. 2 Neihuan Dong Road, Shuikou Town, Kaiping City, Guangdong Province
Country
China
Phone
+86-750-2728599
General Email
tony@ksedal.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 9 of 139

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.