A deck mounted, three-hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes). Incorporating quarter turn ceramic disc headworks with cross top operating members. The product is also supplied with stainless steel braided, EPDM lined flexible connecting hose assemblies, intended for use between side body valves and spout. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0660 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2301028

Size:

¾” BSP (M) (side valves) connected to the ½” BSP (M) inlet on the spout via a stainless steel braided, EPDM lined flexible hose assembly with ½” BSP captive nuts

Marking:

CoalBrook logo rear of spout

Installation Requirements:

R001 R006 R010

Expiry date:

31/01/2028

Model:

XX 2006 YY Understanding the product code: Typical product code – XX2006YY First letters (e.g. XX) – These are replaced with letters representing the name of the trim. The number of letters will depend on the name of the trim. An example is BA which represents the name ‘Bank’. Middle numbers (e.g. 2006) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are: BN - Brushed Nickel CP - Chrome GM - Gunmetal SB - Stable Brass BB - Brushed Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Filling loop assemblies consisting of a stainless steel braided EPDM lined flexible hose, an isolation valve and another isolation valve incorporating a non-verifiable double check valve assembly, verified by test (suitable for backflow protection against fluid category 3). The FL12041515 model is supplied with an isolation valve including a dial type pressure gauge. The FL12041525 model is also supplied with brass end caps incorporating EPDM washers. For use with coper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Intatec logo, CR, flow arrow and size on body of combined isolation valve and double check assembly.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

FL12041515, FL12041520, FL12041525.

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Filling loop assemblies consisting of a stainless steel braided EPDM lined flexible hose, an isolation valve and another isolation valve incorporating a non-verifiable double check valve assembly, verified by test (suitable for backflow protection against fluid category 3). The 171293 model is supplied with an isolation valve including a dial type pressure gauge. The 171292 model is also supplied with brass end caps incorporating EPDM washers. For use with coper pipe (manufactured to EN 1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Center, CR, flow arrow and size on body of combined isolation valve and double check assembly.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

171291 CENTER G24 FILLING LOOP 171292 CENTER G24 FILLING LOOP WITH CAPS 171293 CENTER G24 FILLING LOOP WITH GAUGE

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

“Super Speedfit” range of push-fit fittings with polypropylene bodies and EPDM or NBR ‘O’-rings (NC2301 model only) for use with John Guest LLDPE tubing (blue, black, natural, green, orange, red, white and yellow). Maximum working pressure and maximum operating temperature: 10bar @20°C, 4 bar @60°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303006

Size:

See Model

Marking:

John Guest logo (a Brand of Reliance Worldwide Corporation (UK) Ltd) on fitting body and John Guest logo and size on collet. John Guest and product info on pipe.

Installation Requirements:

R001 R008

Expiry date:

31/03/2028

Model:

All sizes are Pushfit connections unless otherwise stated (1 side pushfit other side NPT/F or UNS). POLYPROPYLENE FITTINGS (IMPERIAL) STRAIGHT ADAPTORS NPTF THREAD: PP010821W: 1/4" OD x 1/8" NPTF STRAIGHT ADAPTOR, PP010822W: 1/4" OD x 1/4" NPTF STRAIGHT ADAPTOR, PP010823W: 1/4" OD x 3/8" NPTF STRAIGHT ADAPTOR, PP010824W: 1/4" OD x 1/2" NPTF STRAIGHT ADAPTOR, PP011222W: 3/8" OD x 1/4" NPTF STRAIGHT ADAPTOR, PP011223W: 3/8" OD x 3/8" NPTF STRAIGHT ADAPTOR, PP011224W: 3/8" OD x 1/2" NPTF STRAIGHT ADAPTOR, PP011623W: 1/2" OD x 3/8" NPTF STRAIGHT ADAPTOR, PP011624W: 1/2" OD x 1/2" NPTF STRAIGHT ADAPTOR. EQUAL STRAIGHT CONNECTOR: PP0408W: 1/4" OD x 1/4" OD EQUAL STRAIGHT CONNECTOR, PPM0408W: 5/16" OD x 5/16" OD EQUAL STRAIGHT CONNECTOR, PP0412W: 3/8" OD x 3/8" OD EQUAL STRAIGHT CONNECTOR, PP0416W: 1/2" OD x 1/2" OD EQUAL STRAIGHT CONNECTOR, NC2094: 1/4" OD x 1/4" OD EQUAL STRAIGHT CONNECTOR, NC2158: 1/4" OD x 1/4" OD EQUAL STRAIGHT CONNECTOR, NC2112: 5/16" OD x 5/16" OD EQUAL STRAIGHT CONNECTOR. REDUCING STRAIGHT CONNECTOR: PP201008W: 5/16" OD x 1/4" OD REDUCING STRAIGHT CONNECTOR, PP201208W: 3/8" OD x 1/4" OD REDUCING STRAIGHT CONNECTOR, PP201612W: 1/2" OD x 3/8" OD REDUCING STRAIGHT CONNECTOR, NC2099: 5/16" OD x 1/4" OD REDUCING STRAIGHT CONNECTOR. EQUAL TEE: PP0208W: 1/4" OD EQUAL TEE, PPM0208W: 5/16" OD EQUAL TEE, PP0212W: 3/8" OD EQUAL TEE, PP0216W: 1/2" OD EQUAL TEE. REDUCING TEE: PP30080812W: 1/4" OD x 1/4" OD x 3/8" BRANCH OD REDUCING TEE, PP30120812W: 3/8" OD x 1/4" OD x 3/8" BRANCH OD REDUCING TEE, PP30121208W: 3/8" OD x 3/8" OD x 1/4" BRANCH OD REDUCING TEE, PP301612W: 1/2" OD x 1/2" OD x 3/8" BRANCH OD REDUCING TEE. STEM TEE: PP531212W: 3/8" OD x 3/8" OD x 3/8" BRANCH OD STEM TEE. EQUAL ELBOW: PP0308W: 1/4" OD EQUAL ELBOW, PP0308W-B: 1/4" OD EQUAL ELBOW (Blue Collet), PPM0308W: 5/16" OD EQUAL ELBOW, PP0312W: 3/8" OD EQUAL ELBOW, PP0316W: 1/2" OD EQUAL ELBOW. REDUCING ELBOW: PP211008W: 5/16" OD x 1/4" OD REDUCING ELBOW, PP211208W: 3/8" OD x 1/4" OD REDUCING ELBOW, PP211612W: 1/2" OD x 3/8" OD REDUCING ELBOW. STEM ELBOW: PP220808W: 1/4" STEM OD x 1/4" TUBE OD STEM ELBOW, PPM220808W: 5/16" STEM OD x 5/16" TUBE OD STEM ELBOW, PP221208W: 3/8" STEM OD x 1/4" TUBE OD STEM ELBOW, PP221212W: 3/8" STEM OD x 3/8" TUBE OD STEM ELBOW, PP221616W: 1/2" STEM OD x 1/2" TUBE OD STEM ELBOW. RIGID ELBOW NPTF THREAD: PP480821W: 1/4" OD x 1/8" NPTF RIGID ELBOW, PP480822W: 1/4" OD x 1/4" NPTF RIGID ELBOW, PP480823W: 1/4" OD x 3/8" NPTF RIGID ELBOW, PP481222W: 3/8" OD x 1/4" NPTF RIGID ELBOW, PP481223W: 3/8" OD x 3/8" NPTF RIGID ELBOW, PP481623W: 1/2" OD x 3/8" NPTF RIGID ELBOW. BULKHEAD CONNECTOR: PP1208W: 1/4" OD x 1/4" BULKHEAD CONNECTOR, PP1212W: 3/8" OD x 3/8" BULKHEAD CONNECTOR, PP1216W: 1/2" OD x 1/2" BULKHEAD CONNECTOR, NCPP1208W: 1/4" OD x 1/4" BULKHEAD CONNECTOR. REDUCING BULKHEAD CONNECTOR: PP121208W: 3/8" OD x 1/4" REDUCING BULKHEAD CONNECTOR. FEMALE ADAPTORS NPTF THREAD: PP450821W: 1/4" OD x 1/8" NPTF FEMALE APAPTOR, PP450822W: 1/4" OD x 1/4" NPTF FEMALE APAPTOR, PP451222W: 3/8" OD x 1/4" NPTF FEMALE APAPTOR, PP451223W: 3/8" OD x 3/8" NPTF FEMALE APAPTOR. TAP ADAPTORS UNS THREAD: PP3208U7W: 1/4" OD x 7/16" UNS TAP ADAPTOR, PP3212U7W: 3/8" OD x 7/16" UNS TAP ADAPTOR. STEM ADAPTORS NPTF THREAD: PP050821W: 1/4" OD x 1/8" NPTF STEM ADAPTOR, PP050822W: 1/4" OD x 1/4" NPTF STEM ADAPTOR, PP051222W: 3/8" OD x 1/4" NPTF STEM ADAPTOR, PP051223W: 3/8" OD x 3/8" NPTF STEM ADAPTOR, PP051623W: 1/2" OD x 3/8" NPTF STEM ADAPTOR, PP051624W: 1/2" OD x 1/2" NPTF STEM ADAPTOR. STEM REDUCER: PP061208W: 3/8" STEM OD x 1/4" TUBE OD STEM REDUCER, PP061210W: 3/8" STEM OD x 5/16" TUBE OD STEM REDUCER, PP061612W: 1/2" STEM OD x 3/8" TUBE OD STEM REDUCER, PP062008W: 5/8" STEM OD x 1/4" TUBE OD STEM REDUCER, PP062012W: 5/8" STEM OD x 3/8" TUBE OD STEM REDUCER, PP062016W: 5/8" STEM OD x 1/2" TUBE OD STEM REDUCER. THREE WAY DIVIDER: PP491208W: 3/8" INLET OD x 1/4" TUBE OUTLET OD THREE WAY DIVIDER. PLUG: PP0808W: 1/4" STEM OD PLUG, PPM0808W: 5/16" STEM OD PLUG, PP0812W: 3/8" STEM OD PLUG, PP0816W: 1/2" STEM OD PLUG. TUBE TO HOSE STEM: PP251212W: 3/8" STEM OD 3/8" HOSE ID TUBE TO HOSE STEM, PP251216W: 3/8" STEM OD 1/2" HOSE ID TUBE TO HOSE STEM, PP251612W: 1/2" STEM OD 3/8" HOSE ID TUBE TO HOSE STEM, PP251616W: 1/2" STEM OD 1/2" HOSE ID TUBE TO HOSE STEM. UNEQUAL TWO WAY DIVIDER: PP241208W: 3/8" OD x 1/4" OD UNEQUAL DIVIDER. TWO WAY DIVIDER: PP2312W: 3/8" INLET OD x 3/8" TUBE OUTLET OD TWO WAY DIVIDER. END STOP: PP4608W: 1/4" END STOP. POLYPROPYLENE FITTINGS (METRIC): EQUAL STRAIGHT CONNECTOR: PPM0408W: 8MM OD EQUAL STRAIGHT CONNECTOR, PPM0412W: 12MM OD EQUAL STRAIGHT CONNECTOR. REDUCING STRAIGHT CONNECTOR: PPM201512W: 15MM OD x 12MM OD REDUCING STRAIGHT CONNECTOR. EQUAL ELBOW: PPM0308W: 8MM OD EQUAL ELBOW, PPM0312W: 12MM OD EQUAL ELBOW. STEM ELBOW: PPM220808W: 8MM STEM OD x 8MM TUBE OD STEM ELBOW, PPM221212W: 12MM STEM OD x 12MM TUBE OD STEM ELBOW. EQUAL TEE: PPM0208W: 8MM OD EQUAL TEE, PPM0212W: 12MM OD EQUAL TEE. STEM REDUCER: PPM061512W: 15MM STEM OD x 12MM TUBE OD STEM REDUCER. PLUG: PPM0808W: 8MM STEM OD PLUG. EQUAL TWO WAY DIVIDER: PPM2312W: 12MM INLET OD x 12MM TUBE OUTLET OD EQUAL TWO WAY DIVIDER. NPT FIXED TEE ADAPTOR: PP641223W: 3/8 x 3/8 x 3/8 NPT FIXED TEE ADAPTOR. FEMALE CONNECTOR: PP6008U9W: 1/4"x 9/16-24 FEMALE CONNECTOR. BRASS FEMALE COUPLER: NC2258: 3/8" x 3/4 hose BRASS FEMALE COUPLER. CONNECTOR: NC2301: 1/2" superseal-15mm CONNECTOR.

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Mingshi stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303363

Size:

see model

Marking:

Mingshi Logo, size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler: S15х1/2"W: 15 x ½” BSP (M), S15х3/4"W: 15 x ¾” BSP (M), S18х1/2"W: 18 x ½” BSP (M), S18х3/4"W: 18 x ¾” BSP (M), S22х1/2"W: 22 x ½” BSP (M), S22х3/4"W: 22 x ¾” BSP (M), S22х1"W: 22 x 1” BSP (M), S28х3/4"W: 28 x ¾” BSP (M), S28x1"W: 28 x 1” BSP (M), S35x1"W: 35 x 1” BSP (M), S35x1 1/4"W: 35 x 1¼” BSP (M), S42х1 1/2"W: 42 x 1½” BSP (M), S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: 15х1/2"W: 15 x ½” BSP (M), 15x3/4"W: 15 x ¾” BSP (M), 18х1/2"W: 18 x ½” BSP (M), 18х3/4"W: 18 x ¾” BSP (M), 18x1"W: 18 x 1” BSP (M), 22х1/2"W: 22 x ½” BSP (M), 22х3/4"W: 22 x ¾” BSP (M), 22x1"W: 22 x 1” BSP (M), 28х3/4"W: 28 x ¾” BSP (M), 28х1"W: 28 x 1” BSP (M), 35х1 1/4"W: 35 x 1¼” BSP (M), 42х1 1/2"W: 42 x 1½” BSP (M), 54х2"W: 54 x 2” BSP (M). Female threaded coupler: S15х1/2"N: 15 x ½” BSP (F), S18х1/2"N: 18 x ½” BSP (F), S18х3/4"N: 18 x ¾” BSP (F), S22х1/2"N: 22 x ½” BSP (F), S22х3/4"N: 22 x ¾” BSP (F), S28х3/4"N: 28 x ¾” BSP (F), S28х1"N: 28 x 1” BSP (F), S35x1"N: 35 x 1” BSP (F), S35x1 1/4"N: 35 x 1¼” BSP (F), S42х1 1/2"N: 42 x 1½” BSP (F), S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: 15х1/2"N: 15 x ½” BSP (F), 15x3/4"N: 15 x ¾” BSP (F), 18х1/2"N: 18 x ½” BSP (F), 18х3/4"N: 18 x ¾” BSP (F), 18x1"N: 18 x 1” BSP (F), 22х1/2"N: 22 x ½” BSP (F), 22х3/4"N: 22 x ¾” BSP (F), 22x1"N: 22 x 1” BSP (F), 28х3/4"N: 28 x ¾” BSP (F), 28х1"N: 28 x 1” BSP (F), 35х1 1/4"N: 35 x 1¼” BSP (F), 42х1 1/2"N: 42 x 1½” BSP (F), 54х2"N: 54 x 2” BSP (F). Coupler: S15: 15 x 15mm, S18х15: 18 x 15mm, S18: 18 x 18mm, S22х18: 22 x 18mm, S22х15: 22 x 15mm, S22: 22 x 22mm, S28х15: 28 x 15mm, S28х22: 28 x 22mm, S28: 28 x 28mm, S35х28: 35 x 28mm, S35: 35 x 35mm, S42х35: 42 x 35mm, S42: 42 x 42mm, S54х42: 54 x 42mm, S54: 54 x 54mm. Coupler with straight pipe: S18х15Ⅱ: 18 x 15mm, S22х15Ⅱ: 22 x 15mm, S22х18Ⅱ: 22 x 18mm, S28х15Ⅱ: 28 x 15mm, S28х18Ⅱ: 28 x 18mm, S28х22Ⅱ: 28 x 22mm, S35х15Ⅱ: 35 x 15mm, S35х18Ⅱ: 35 x 18mm, S35х22Ⅱ: 35 x 22mm, S35х28Ⅱ: 35 x 28mm, S42х22Ⅱ: 42 x 22mm, S42х28Ⅱ: 42 x 28mm, S42х35Ⅱ: 42 x 35mm, S54х28Ⅱ: 54 x 28mm, S54х35Ⅱ: 54 x 35mm, S54х42Ⅱ: 54 x 42mm. Adjustable connector: S15Ⅱ: 15 x 15mm, S18Ⅱ: 18 x 18mm, S22Ⅱ: 22 x 22mm, S28Ⅱ: 28 x 28mm, S35Ⅱ: 35 x 35mm, S42Ⅱ: 42 x 42mm, S54Ⅱ: 54 x 54mm. Union: H15х1/2": 15 x ½” captive nut, H15х3/4": 15 x ¾” captive nut, H18х1/2": 18 x ½” captive nut, H18х3/4": 18 x ¾” captive nut, H22х1/2": 22 x ½” captive nut, H22х3/4": 22 x ¾” captive nut, H28х3/4": 28 x ¾” captive nut, H28х1": 28 x 1” captive nut, H35x1": 35 x 1” captive nut, H35x1 1/4": 35 x 1¼” captive nut, H42х1 1/2": 42 x 1½” captive nut, H54х2": 54 x 2” captive nut. Tee: T15: 15 x 15 x 15mm, T18х15х18: 18 x 15 x 18mm, T18: 18 x 18 x 18mm, T22х18х22: 22 x 18 x 22mm, T22х15х22: 22 x 15 x 22mm, T22: 22 x 22 x 22mm, T28x15x28: 28 x 15 x 28mm, T28х22х22: 28 x 22 x 22mm, T28x22x28: 28 x 22 x 28mm, T28: 28 x 28 x 28mm, T35x15x35: 35 x 15 x 35mm, T35x22x35: 35 x 22 x 35mm, T35x28x35: 35 x 28 x 35mm, T35: 35 x 35 x 35mm, T42х35х42: 42 x 35 x 42mm, T42: 42 x 42 x 42mm, T54х42х54: 54 x 42 x 54mm, T54: 54 x 54 x 54mm. Female threaded Tee: T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm, T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm, T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm, T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm, T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm, T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm, T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm, T28х1"Nx28: 28 x 1” BSP (F) x 28mm, T35х1"Nx35: 35 x 1” BSP (F) x 35mm, T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm, T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm, T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm, T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm, T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm, T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm, T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm, T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm, T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm, T28х1"Wx28: 28 x 1” BSP (M) x 28mm, T35х1"Wx35: 35 x 1” BSP (M) x 35mm, T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm, T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm, T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: L15a: 15 x 15mm, L18а: 18 x 18mm, L22a: 22 x 22mm, L28a: 28 x 28mm, L35a: 35 x 35mm, L42а: 42 x 42mm, L54а: 54 x 54mm. 90°A Elbow: L15: 15 x 15mm, L18: 18 x 18mm, L22: 22 x 22mm, L28: 28 x 28mm, L35: 35 x 35mm, L42: 42 x 42mm, L54: 54 x 54mm. Female threaded elbow: L15х1/2"N: 15 x ½” BSP (F), L18х1/2"N: 18 x ½” BSP (F), L18х3/4"N: 18 x ¾” BSP (F), L22х1/2"N: 22 x ½” BSP (F), L22х3/4"N: 22 x ¾” BSP (F), L28х3/4"N: 28 x ¾” BSP (F), L35х1"N: 35 x 1” BSP (F). Male threaded elbow: L15x1/2"W: 15 x ½” BSP (M), L18х1/2"W: 18 x ½” BSP (M), L18х3/4"W: 18 x ¾” BSP (M), L22x1/2"W: 22 x ½” BSP (M), L22x3/4"W: 22 x ¾” BSP (M), L28x3/4"W: 28 x ¾” BSP (M), L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: L15х1/2"N(a): 15 x ½” BSP (F), L18х1/2"N(a): 18 x ½” BSP (F), L22х1/2"N(a): 22 x ½” BSP (F), L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: 45°L15a: 15 x 15mm, 45°L18а: 18 x 18mm, 45°L22a: 22 x 22mm, 45°L28a: 28 x 28mm, 45°L35a: 35 x 35mm, 45°L42а: 42 x 42mm, 45°L54а: 54 x 54mm. 45°A Elbow: 45°L15: 15 x 15mm, 45°L18: 18 x 18mm, 45°L22: 22 x 22mm, 45°L28: 28 x 28mm, 45°L35: 35 x 35mm, 45°L42: 42 x 42mm, 45°L54: 54 x 54mm. One end pipe bridge: Ω15a: 15 x 15mm, Ω18a: 18 x 18mm, Ω22a: 22 x 22mm. Pipe Bridge: Ω15: 15 x 15mm, Ω18: 18 x 18mm, Ω22: 22 x 22mm, Ω28: 28 x 28mm. Cap: D15: 15 x 15mm, D18: 18 x 18mm, D22: 22 x 22mm, D28: 28 x 28mm, D35: 35 x 35mm, D42: 42 x 42mm, D54: 54 x 54mm. Pipe: Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm.

Approval Holder:

Zhejiang Mingshi Stainless Steel Co.,Ltd.

Company Name

Zhejiang Mingshi Stainless Steel Co.,Ltd.

Address

Huxi Village, Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province

Country

China

View All Listings by this Company

Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057) with EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211828

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

Lawton Tubes Logo & Size on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

LF3015 CORE 15MM X 1/2" STRAIGHT MALE CONN SOLDER RING LF3022 CORE 22MM X 3/4" STRAIGHT MALE CONN SOLDER RING

Approval Holder:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Coventry

Postcode

CV4 9AB

Country

United Kingdom

Phone

+44 24 7646 6203 or 024 7646 6203

General Email

mlis@lawtontubes.co.uk

View All Listings by this Company

Range of press-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with SS316L pipes. Maximum working pressure 16 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303335

Size:

see model

Marking:

YS, size on body

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

STRAIGHT COUPLING SM3270 316L001515 – 15 mm SM3270 316L001818 – 18mm SM3270 316L002222 – 22mm SM3270 316L002828 – 28mm SM3270 316L003535 – 35mm SM3270 316L004242 – 42mm SM3270 316L005454 – 54mm SM3270 316L006666 – 66.7mm SM3270 316L007676 – 76.1mm SM3270 316L008888 – 88.9mm SM3270 316L00X8X8 – 108mm SLIP COUPLING SM3274 316L001515 – 15mm SM3274 316L001818 – 18mm SM3274 316L002222 – 22mm SM3274 316L002828 – 28mm SM3274 316L003535 – 35mm SM3274 316L004242 – 42mm SM3274 316L005454 – 54mm SM3274 316L006666 – 66.7mm SM3274 316L007676 – 76.1mm SM3274 316L008888 – 88.9mm SM3274 316L00X8X8 – 108mm 90 DEGREE EQUAL ELBOW SM3090 316L001515 – 15mm SM3090 316L001818 – 18mm SM3090 316L002222 – 22mm SM3090 316L002828 – 28mm SM3090 316L003535 – 35mm SM3090 316L004242 – 42mm SM3090 316L005454 – 54mm SM3090 316L006666 – 66.7mm SM3090 316L007676 – 76.1mm SM3090 316L008888 – 88.9mm SM3090 316L00X8X8 – 108mm 90 DEGREE STREET ELBOW SM3092 316L001515 – 15mm SM3092 316L001818 – 18mm SM3092 316L002222 – 22mm SM3092 316L002828 – 28mm SM3092 316L003535 – 35mm SM3092 316L004242 – 42mm SM3092 316L005454 – 54mm SM3092 316L006666 – 66.7mm SM3092 316L007676 – 76.1mm SM3092 316L008888 – 88.9mm SM3092 316L00X8X8 – 108mm 45 DEGREE EQUAL ELBOW SM3041 316L001515 – 15mm SM3041 316L001818 – 18mm SM3041 316L002222 – 22mm SM3041 316L002828 – 28mm SM3041 316L003535 – 35mm SM3041 316L004242 – 42mm SM3041 316L005454 – 54mm SM3041 316L006666 – 66.7mm SM3041 316L007676 – 76.1mm SM3041 316L008888 – 88.9mm SM3041 316L00X8X8 – 108mm 45 DEGREE STREET ELBOW SM3040 316L001515 – 15mm SM3040 316L001818 – 18mm SM3040 316L002222 – 22mm SM3040 316L002828 – 28mm SM3040 316L003535 – 35mm SM3040 316L004242 – 42mm SM3040 316L005454 – 54mm SM3040 316L006666 – 66.7mm SM3040 316L007676 – 76.1mm SM3040 316L008888 – 88.9mm SM3040 316L00X8X8 – 108mm EQUAL TEE SM3130 316L151515 – 15mm SM3130 316L181818 – 18mm SM3130 316L222222 – 22mm SM3130 316L282828 – 28mm SM3130 316L353535 – 35mm SM3130 316L424242 – 42mm SM3130 316L545454 – 54mm SM3130 316L666666 – 66.7mm SM3130 316L767676 – 76.1mm SM3130 316L888888 – 88.9mm SM3130 316LX8X8X8 – 108mm REDUCING TEE SM3131 316L181815 – 18 x 18 x 15mm SM3131 316L222215 – 22 x 22 x 15mm SM3131 316L222218 – 22 x 22 x 18mm SM3131 316L282815 – 28 x 28 x 15mm SM3131 316L282818 – 28 x 28 x 18mm SM3131 316L282822 – 28 x 28 x 22mm SM3131 316L353515 – 35 x 35 x 15mm SM3131 316L353518 – 35 x 35 x 18mm SM3131 316L353522 – 35 x 35 x 22mm SM3131 316L353528 – 35 x 35 x 28mm SM3131 316L424215 – 42 x 42 x 15mm SM3131 316L424218 – 42 x 42 x 18mm SM3131 316L424222 – 42 x 42 x 22mm SM3131 316L424228 – 42 x 42 x 28mm SM3131 316L424235 – 42 x 42 x 35mm SM3131 316L545415 – 54 x 54 x 15mm SM3131 316L545418 – 54 x 54 x 18mm SM3131 316L545422 – 54 x 54 x 22mm SM3131 316L545428 – 54 x 54 x 28mm SM3131 316L545435 – 54 x 54 x 35mm SM3131 316L545442 – 54 x 54 x 42mm SM3131 316L666628 – 66.7 x 66.7 x 28mm SM3131 316L666635 – 66.7 x 66.7 x 35mm SM3131 316L666642 – 66.7 x 66.7 x 42mm SM3131 316L666654 – 66.7 x 66.7 x 54mm SM3131 316L767622 – 76.1 x 76.1 x 22mm SM3131 316L767628 – 76.1 x 76.1 x 28mm SM3131 316L767635 – 76.1 x 76.1 x 35mm SM3131 316L767642 – 76.1 x 76.1 x 42mm SM3131 316L767654 – 76.1 x 76.1 x 54mm SM3131 316L888822 – 88.9 x 88.9 x 22mm SM3131 316L888828 – 88.9 x 88.9 x 28mm SM3131 316L888835 – 88.9 x 88.9 x 35mm SM3131 316L888842 – 88.9 x 88.9 x 42mm SM3131 316L888854 – 88.9 x 88.9 x 54mm SM3131 316L888876 – 88.9 x 88.9 x 76.1mm SM3131 316LX8X822 – 108 x 108 x 22mm SM3131 316LX8X828 – 108 x 108 x 28mm SM3131 316LX8X835 – 108 x 108 x 35mm SM3131 316LX8X842 – 108 x 108 x 42mm SM3131 316LX8X854 – 108 x 108 x 54mm SM3131 316LX8X876 – 108 x 108 x 76.1mm SM3131 316LX8X888 – 108 x 108 x 88.9mm STOP END SM3301 316L000015 – 15mm SM3301 316L000018 – 18mm SM3301 316L000022 – 22mm SM3301 316L000028 – 28mm SM3301 316L000035 – 35mm SM3301 316L000042 – 42mm SM3301 316L000054 – 54mm SM3301 316L000066 – 66.7mm SM3301 316L000076 – 76.1mm SM3301 316L000088 – 88.9mm SM3301 316L0000X8 – 108mm FULL CROSSOVER SM3085 316L001515 – 15mm SM3085 316L001818 – 18mm SM3085 316L002222 – 22mm SM3085 316L002828 – 28mm PART CORSSOVER SM3086 316L001515 – 15mm SM3086 316L001818 – 18mm SM3086 316L002222 – 22mm SM3086 316L002828 – 28mm FLANGE SM3325 316L000015 – 15mm SM3325 316L000018 – 18mm SM3325 316L000022 – 22mm SM3325 316L000028 – 28mm SM3325 316L000035 – 35mm SM3325 316L000042 – 42mm SM3325 316L000054 – 54mm SM3325 316L000066 – 66.7mm SM3325 316L000076 – 76.1mm SM3325 316L000088 – 88.9mm SM3325 316L0000X8 – 108mm REDUCED COUPLING SM3240 316L001815 – 18 x 15mm SM3240 316L002215 – 22 x 15mm SM3240 316L002218 – 22 x 18mm SM3240 316L002815 – 28 x 15mm SM3240 316L002818 – 28 x 18mm SM3240 316L002822 – 28 x 22mm SM3240 316L003515 – 35 x 15mm SM3240 316L003518 – 35 x 18mm SM3240 316L003522 – 35 x 22mm SM3240 316L003528 – 35 x 28mm SM3240 316L004215 – 42 x 15mm SM3240 316L004218 – 42 x 18mm SM3240 316L004222 – 42 x 22mm SM3240 316L004228 – 42 x 28mm SM3240 316L004235 – 42 x 35mm SM3240 316L005415 – 54 x 15mm SM3240 316L005418 – 54 x 18mm SM3240 316L005422 – 54 x 22mm SM3240 316L005428 – 54 x 28mm SM3240 316L005435 – 54 x 35mm SM3240 316L005442 – 54 x 42mm SM3240 316L006628 – 66.7 x 28mm SM3240 316L006635 – 66.7 x 35mm SM3240 316L006642 – 66.7 x 42mm SM3240 316L006654 – 66.7 x 54mm SM3240 316L007642 – 76.1 x 42mm SM3240 316L007654 – 76.1 x 54mm SM3240 316L008854 – 88.9 x 54mm SM3240 316L008876 – 88.9 x 76.1mm SM3240 316L00X854 – 108 X 54mm SM3240 316L00X876 – 108 X 76.1mm SM3240 316L00X888 - 108 X 88.9mm FITTING REDUCER SM3243 316L001815 – 18 x 15mm SM3243 316L002215 – 22 x 15mm SM3243 316L002218 – 22 x 18mm SM3243 316L002815 – 28 x 15mm SM3243 316L002818 – 28 x 18mm SM3243 316L002822 – 28 x 22mm SM3243 316L003515 – 35 x 15mm SM3243 316L003518 – 35 x 18mm SM3243 316L003522 – 35 x 22mm SM3243 316L003528 – 35 x 28mm SM3243 316L004215 – 42 x 15mm SM3243 316L004218 – 42 x 18mm SM3243 316L004222 – 42 x 22mm SM3243 316L004228 – 42 x 28mm SM3243 316L004235 – 42 x 35mm SM3243 316L005415 – 54 x 15mm SM3243 316L005418 – 54 x 18mm SM3243 316L005422 – 54 x 22mm SM3243 316L005428 – 54 x 28mm SM3243 316L005435 – 54 x 35mm SM3243 316L005442 – 54 x 42mm SM3243 316L006628 – 66.7 x 28mm SM3243 316L006635 – 66.7 x 35mm SM3243 316L006642 – 66.7 x 42mm SM3243 316L006654 – 66.7 x 54mm SM3243 316L007642 – 76.1 x 42mm SM3243 316L007654 – 76.1 x 54mm SM3243 316L008854 – 88.9 x 54mm SM3243 316L008876 – 88.9 x 76.1mm SM3243 316L00X854 – 108 x 54mm SM3243 316L00X876 – 108 x 76.1mm SM3243 316L00X888 – 108 x 88.9mm C X MI COUPLING SM3253 316L015M12 – 15 x ½” BSP (M) SM3253 316L015M34 – 15 x ¾” BSP (M) SM3253 316L018M12 – 18 x ½” BSP (M) SM3253 316L018M34 – 18 x ¾” BSP (M) SM3253 316L022M12 – 22 x ½” BSP (M) SM3253 316L022M34 – 22 x ¾” BSP (M) SM3253 316L022M10 – 22 x 1” BSP (M) SM3253 316L028M34 – 28 x ¾” BSP (M) SM3253 316L028M10 – 28 x 1” BSP (M) SM3253 316L035M10 – 35 x 1” BSP (M) SM3253 316L035MA4 – 35 x 1 ¼” BSP (M) SM3253 316L042MA4 – 42 x 1 ¼” BSP (M) SM3253 316L042MA2 – 42 x 1 ½” BSP (M) SM3253 316L054MA2 – 54 x 1 ½” BSP (M) SM3253 316L054M20 – 54 x 2” BSP (M) SM3253 316L066M20 – 66.7 x 2” BSP (M) SM3253 316L076MA2 – 76.1 x 2 ½” BSP (M) SM3253 316L088M30 – 88.9 x 3” BSP (M) C X FI COUPLING SM3250 316L015F12 – 15 x ½” BSP (F) SM3250 316L015F34 – 15 x ¾” BSP (F) SM3250 316L018F12 – 18 x ½” BSP (F) SM3250 316L018F34 – 18 x ¾” BSP (F) SM3250 316L022F12 – 22 x ½” BSP (F) SM3250 316L022F34 – 22 x ¾” BSP (F) SM3250 316L022F10 – 22 x 1” BSP (F) SM3250 316L028F34 – 28 x ¾” BSP (F) SM3250 316L028F10 – 28 x 1” BSP (F) SM3250 316L035F10 – 35 x 1” BSP (F) SM3250 316L035FA4 – 35 x 1 ¼” BSP (F) SM3250 316L042FA4 – 42 x 1 ¼” BSP (F) SM3250 316L042FA2 – 42 x 1 ½” BSP (F) SM3250 316L054FA2 – 54 x 1 ½” BSP (F) SM3250 316L054F20 – 54 x 2” BSP (F) SM3250 316L066F20 – 66.7 x 2” BSP (F) SM3250 316L076FA2 – 76.1 x 2 ½” BSP (F) SM3250 316L088F30 – 88.9 x 3” BSP (F) SWIVEL COUPLING SM3260 316L015F12 – 15 x ½” BSP Captive nut SM3260 316L018F12 – 18 x ½” BSP Captive nut SM3260 316L022F34 – 22 x ¾” BSP Captive nut SM3260 316L028F10 – 28 x 1” BSP Captive nut SM3260 316L035FA4 – 35 x 1 ¼” BSP Captive nut SM3260 316L042FA2 – 42 x 1 ½” BSP Captive nut SM3260 316L054F20 – 54 x 2” BSP Captive nut C X C X MI TEE SM3230 316L215M12 – 15 x 15 x ½” BSP (M) SM3230 316L218M12 – 18 x 18 x ½” BSP (M) SM3230 316L218M34 – 18 x 18 x ¾” BSP (M) SM3230 316L222M12 – 22 x 22 x ½” BSP (M) SM3230 316L222M34 – 22 x 22 x ¾” BSP (M) SM3230 316L228M12 – 28 x 28 x ½” BSP (M) SM3230 316L228M34 – 28 x 28 x ¾” BSP (M) SM3230 316L228M10 – 28 x 28 x 1” BSP (M) SM3230 316L235M12 – 35 x 35 x ½” BSP (M) SM3230 316L235M34 – 35 x 35 x ¾” BSP (M) SM3230 316L235MA4 – 35 x 35 x 1 ¼” BSP (M) SM3230 316L242M34 – 42 x 42 x ¾” BSP (M) SM3230 316L242MA4 – 42 x 42 x 1 ¼” BSP (M) SM3230 316L242MA2 – 42 x 42 x 1 ½” BSP (M) SM3230 316L254M34 – 54 x 54 x ¾” BSP (M) SM3230 316L254MA2 – 54 x 54 x 1 ½” SM3230 316L254M20 – 54 x 54 x 2” SM3230 316L266M34 – 66.7 x 66.7 x ¾” SM3230 316L266M20 – 66.7 x 66.7 x 2” C X C X FI TEE SM3231 316L215F12 – 15 x 15 x ½” BSP (F) SM3231 316L218F12 – 18 x 18 x ½” BSP (F) SM3231 316L218F34 – 18 x 18 x ¾” BSP (F) SM3231 316L222F12 – 22 x 22 x ½” BSP (F) SM3231 316L222F34 – 22 x 22 x ¾” BSP (F) SM3231 316L228F12 – 28 x 28 x ½” BSP (F) SM3231 316L228F34 – 28 x 28 x ¾” BSP (F) SM3231 316L228F10 – 28 x 28 x 1” BSP (F) SM3231 316L235F12 – 35 x 35 x ½” BSP (F) SM3231 316L235F34 – 35 x 35 x ¾” BSP (F) SM3231 316L242F12 – 42 x 42 x ½” BSP (F) SM3231 316L242F34 – 42 x 42 x ¾” BSP (F) SM3231 316L254F12 – 54 x 54 x ½” BSP (F) SM3231 316L254F34 – 54 x 54 x ¾” BSP (F) SM3231 316L254F20 – 54 x 54 x 2” BSP (F) SM3231 316L266F34 – 66.7 x 66.7 x ¾” BSP (F) SM3231 316L266F20 – 66.7 x 66.7 x 2” BSP (F) SM3231 316L276F34 – 76.1 x 76.1 x ¾” BSP (F) SM3231 316L276F20 – 76.1 x 76.1 x 2” BSP (F) SM3231 316L288F34 – 88.9 x 88.9 x ¾” BSP (F) SM3231 316L288F20 – 88.9 x 88.9 x 2” BSP (F) SM3231 316L2X8F34 – 108 x 108 x ¾” BSP (F) SM3231 316L2X8F20 – 108 x 108 x 2” BSP (F) C X MI 90D ELBOW SM3190 316L015M12 – 15 x ½” BSP (M) SM3190 316L015M34 – 15 x ¾” BSP (M) SM3190 316L018M12 – 18 x ½” BSP (M) SM3190 316L022M12 – 22 x ½” BSP (M) SM3190 316L022M34 – 22 x ¾” BSP (M) SM3190 316L022M10 – 22 x 1” BSP (M) SM3190 316L028M34 – 28 x ¾” BSP (M) SM3190 316L028M10 – 28 x 1” BSP (M) SM3190 316L035M10 – 35 x 1” BSP (M) SM3190 316L035MA4 – 35 x 1 ¼” BSP (M) SM3190 316L042MA2 – 42 x 1 ½” BSP (M) SM3190 316L054MA2 – 54 x 1 ½” BSP (M) SM3190 316L054M20 – 54 x 2” BSP (M) SM3190 316L066M20 – 66.7 x 2” BSP (M) SM3190 316L076MA2 – 76.1 x 76.1 x 2 ½” BSP (M) SM3190 316L088M30 – 88.9 x 88.9 x 3” BSP (M) C X FI 90D ELBOW SM3191 316L015F12 – 15 x ½” BSP (F) SM3191 316L018F12 – 18 x ½” BSP (F) SM3191 316L022F34 – 22 x ¾” BSP (F) SM3191 316L028F10 – 28 x 1” BSP (F) SM3191 316L035FA4 – 35 x 1 ¼” BSP (F) SM3191 316L042FA2 – 42 x 1 ½” BSP (F) SM3191 316L054F20 – 54 x 2” BSP (F) SM3191 316L066F20 – 66.7 x 2” BSP (F) C X MI 90D SHORT ELBOW SM3290 316L015M12 – 15 x ½” BSP (M) SM3290 316L018M12 – 18 x ½” BSP (M) SM3290 316L022M34 – 22 x ¾” BSP (M) SM3290 316L028M10 – 28 x 1” BSP (M) SM3290 316L035MA4 – 35 x 1 ¼” BSP (M) SM3290 316L042MA2 – 42 x 1 ½” BSP (M) SM3290 316L054M20 – 54 x 2” BSP (M) C X FI 90D SHORT ELBOW SM3291 316L015F12 – 15 x ½” BSP (F) SM3291 316L018F12 – 18 x ½” BSP (F) SM3291 316L022F12 – 22 x ½” BSP (F) SM3291 316L022F34 – 22 x ¾” BSP (F) SM3291 316L028F10 – 28 x 1” BSP (F) SM3291 316L035FA4 – 35 x 1 ¼” BSP (F) CXFI 90D WALLPLATE ELBOW SM3390 316L015F12 – 15 x ½” BSP (F) SM3390 316L018F12 – 18 x ½” BSP (F) SM3390 316L022F34 – 22 x ¾” BSP (F) SM3390 316L028F10 – 28 x 1” BSP (F) SM3390 316L035FA4 – 35 x 1 ¼” BSP (F)

Approval Holder:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Range of plastic push-fit fittings (available in black, white and grey) and a manifold (available in grey only) with EPDM or NBR ‘O’-rings. For use with copper pipe (manufactured to EN1057), PE-X pipe (manufactured to BS7291-3:2010) & PB pipe (BS EN 21003-2:2008). Maximum working pressure: 12.5 bar @ 20°C (Cold water use only). From September 2023 the products are suitable for 8.0 bar @ 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303062

Size:

See models.

Marking:

JG logo and size moulded on the collet or body of fitting.

Installation Requirements:

R001 R008

Expiry date:

31/03/2028

Model:

GREY ACETAL FITTINGS COOLING MANIFOLD: NC2183 15mm x 3/8”. METRIC TO IMPERIAL ADAPTORS STRAIGHT CONNECTOR: NC462 15mm x ½”. UNEQUAL STRAIGHT CONNECTOR: NC2511 15mm x 3/8”. STEM TO TUBE ADAPTOR: NC2164 15mm x 3/8”, NC2173 15mm x ½”. STEM TO HOSE CONNECTOR: NC932 15mm x ½”. TUBE TO HOSE CONNECTOR: NC448 15mm x ½”, NC737 22mm x ½”, NC473 22mm x ¾”. ADAPTOR TEE: NC869 15mm x 15mm x 3/8”. STEM TO STEM ADAPTOR: NC478 15mm x 3/8”. ACETAL CM FITTINGS WITH EPDM O-RINGS FEMALE ADAPTOR WITH BSP THREAD: CM451513FS 15mm x 3/8”. TAP ADAPTOR WITH UNS THREAD: CM3210U7E 10mm x 7/16”. TAP ADAPTOR BSP THREAD: CM321014E 10mm x ½” BSP (F), CM3201S 15mm x ½” BSP (F). TAP ADAPTOR FLAT END BSP THREAD: CM321014FE 10mm x ½” BSP (F). TWO-WAY DIVIDER: CM2315W 15mm. STRAIGHT ADAPTOR BSP THREAD: CM011514S 15mm x ½” (M), CM011216S 22mm x ¾” (M). REDUCING STRAIGHT CONNECTOR: CM201510S 15mm x 10mm, CM201512W 15mm x 12mm. REDUCING ELBOW CONNECTOR: CM211210W 12mm x 10mm. SLIP CONNECTOR: CM-SC-15-S 15mm. STEM ELBOW: CM221515W 15mm x 15mm. BLACK ACETAL FITTINGS (METRIC SIZES) STRAIGHT ADAPTORS BSP THREAD: PM011012E 10mm x ¼” BSP (M), PM011013E 10mm x 3/8” BSP (M), PM011014E 10mm x ½” BSP (M), PM011513E 15mm x 3/8” BSP (M), PM011514E 15mm x ½” BSP (M), PM011516E 15mm x ¾” BSP (M), PM012216E 22mm x ¾” BSP (M). STRAIGHT ADAPTERS BSPT THREAD: PM011002E 10mm x ¼” BSPT (M), PM011003E 10mm x 3/8” BSPT (M), PM011004E 10mm x ½” BSPT (M). EQUAL STRAIGHT CONNECTORS: PM0410E 10mm, PM0415E 15mm, PM0422E 22mm. REDUCING STRAIGHT CONNECTORS: PM201004E 10mm x 4mm, PM201006E 10mm x 6mm, PM201008E 10mm x 8mm, PM201210E 12mm x 10mm. EQUAL ELBOW: PM0310E 10mm, PM0315E 15mm, PM0322E 22mm. REDUCING ELBOW CONNECTOR: PM211004E 10mm x 4mm, PM211006E 10mm x 6mm, PM211008E 10mm x 8mm, PM211210E 12mm x 10mm. STEM ELBOW: PM221010E 10mm x 10mm, PM221515E 15mm x 15mm, PM222222E 22mm x 22mm. SWIVEL ELBOW BSP THREAD: PM091012E 10mm x ¼”, PM091013E 10mm x 3/8”, PM091014E 10mm x ½”. SWIVEL ELBOW BSPT THREAD: PM091002E 10mm x ¼”, PM091003E 10mm x 3/8”, PM091004E 10mm x ½”. EQUAL TEE: PM0210E 10MM, PM0215E 15mm, PM0222E 22mm. REDUCING TEE: PM3022AE 22mm x 22mm x 15mm. SWIVEL TEE CENTRE LEG BSP THREAD: PM101012E 10mm x ¼”, PM101013E 10mm x 3/8”, PM101014E 10mm x ½”. SWIVEL TEE CENTRE LEG BSPT THREAD: PM101002E 10mm x ¼“, PM101003E 10mm x 3/8“, PM101004E 10mm x ½“. SWIVEL MALE RUN TEE BSP THREAD: PM111012E 10mm x ¼”, PM111013E 10mm x 3/8”, PM111014E 10mm x ½”. SWIVEL MALE RUN TEE BSPT THREAD: PM111002E 10mm x ¼“, PM111003E 10mm x 3/8“, PM111004E 10mm x ½“. BULKHEAD CONNECTOR: PM1210E 10mm, REDUCER: PM061210E 12mm x 10mm, PM061510E 15mm x 10mm, PM061512E 15mm x 12mm, PM061815E 18mm x 15mm, PM062215E 22mm x 15mm, PM062218E 22mm x 18mm. STEM ADAPTOR BSP THREAD: PM051012E 10mm x ¼” BSP (M), PM051013E 10mm x 3/8” BSP (M), PM051014E 10mm x ½” BSP (M), PM051513E 15mm x 3/8” BSP (M), PM051514E 15mm x ½” BSP (M), PM052214E 22mm x ½” BSP (M), PM052216E 22mm x ¾ ” BSP (M). STEM ADAPTOR BSPT THREAD: PM051002E 10mm x ¼” BSPT (M), PM051003E 10mm x 3/8” BSPT (M), PM051004E 10mm x ½” BSPT (M). TWO WAY DIVIDER: PM2310E 10mm, PM2315E 15mm. PLUG (RED & BLACK): PM0810R 10MM RED, PM0815E 15MM BLACK, PM0822E 22MM BLACK. END STOP: PM4615E 15mm, PM4622E 22mm. FEMALES ADAPTOR BSP THREAD: PM451015FE 10mm x 5/8”. U-BEND: PMUB15E 15mm. BACK PLATE ELBOW: 15PWB 15mm x ½” BSP. WHITE ACETAL FITTINGS BULKHEAD ELBOW: CM551516W 15mm x ¾” BSP.

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). Incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211827

Size:

End feed: 15mm-54mm

Marking:

Lawton Tubes Logo & Size on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

N3015 CORE 15MM X 1/2" MALE ADAPTOR BRASS N3022 CORE 22MM X 3/4" MALE ADAPTOR BRASS

Approval Holder:

The Lawton Tube Company Ltd.

Company Name

The Lawton Tube Company Ltd.

Address

Torrington Avenue, Coventry

Postcode

CV4 9AB

Country

United Kingdom

Phone

+44 24 7646 6203 or 024 7646 6203

General Email

mlis@lawtontubes.co.uk

View All Listings by this Company

Range of water meters with brass bodies, plastic turbines and EPDM washers. Inlets incorporate a plastic filter. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 50°C

Section:

1505 Water Meters

Size:

DN15 – DN 40 - ¾” – 2” Male BSP, DN 50 – DN50 Flange.

Marking:

NWM, Ningbo Water Meter Co logo and other technical info on meter face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2027

Model:

MJ-SDC DN15 – ¾” BSP (M), MJ-SDC DN 20 – 1” BSP (M), MJ-SDC DN 25 – 1 ¼” BSP (M), MJ-SDC DN 32 - 1 ½” BSP (M), MJ-SDC DN 40 - 2” BSP (M), MJ-SDC DN 50 - FLANGED Addition to range: 2 new dials added to meter and blue coating finish.

Approval Holder:

Ningbo Water Meter (Group) Co., Ltd

Company Name

Ningbo Water Meter (Group) Co., Ltd

Address

No 355 Hongxing Road Jiangbei District Ningbo

Country

China

View All Listings by this Company