Range of 2, 3 or 4 way manifolds with brass bodies and stop valves at each of the outlets. Maximum operating pressure 10 bar. Maximum operating temperature 85°C
Range of wall mounted, concealed, manually operated blending valves, (brass bodies - various finish trim kits), incorporating ceramic cartridge headworks with single lever operating members. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.
Wall mounted, manually operated, blending valve (brass body - various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. The inlets incorporate NBR washers with stainless steel mesh strainers. Maximum working pressure 5.0 Bar Maximum operating temperature 60.0°C.
Range of wall mounted bar type thermostatic shower mixing valve with chromium plated brass body incorporating a non-rising spindle headwork with a dome operating member controlling the flow. The temperature is independently controlled via a thermostatic cartridge incorporating a manual over ride button with a dome type operating member. Both inlets incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection and stainless-steel strainer. Maximum working pressure 5.0 Bar, Maximum operating temperature 60 °C
Range of wall mounted, concealed thermostatic shower valves incorporating 2 way or 3 way function with push button headworks controlling the flow to either shower outlets. The temperature is controlled independently via a thermostatic cartridge. The inlets incorporate approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C
Range of wafer or lugged (see models) butterfly valves incorporating blue epoxy coated ductile iron bodies and discs, with Maximum working pressure: 16 Bar. Maximum operating temperature: 100 °C.
Range of float operated valves with bronze bodies and NBR seals. Maximum working pressure 8.0 Bar Cold water use only
Range of piston type float operated inlet valves with bronze bodies. The valves discharge from a downwards atmospheric discharge arrangement on the underside of the body. Maximum working pressure 10.0 Bar Cold water use only
Range of piston type float operated inlet valves with brass bodies and backnuts. Maximum working pressure: size for 1/2”- 3/4” 10 bar, size for 1”- 2” 8 bar, size for 2-1/2”- 4” 6 bar. Cold water use only.
Range of wall mounted concealed flow control valves (brass body with various finishes) incorporating, quarter turn ceramic disc headworks with single lever operating members. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C.
Range of non-return valves with bronze bodies and discs. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Adjustable, in-line pressure reducing valves with DZR brass bodies. Adjustable between 3.0 bar and 5.0 bar outlet pressure. Compression connections for use with copper pipe to EN1057. Maximum inlet supply pressure 16.0 bar. Maximum operating temperature 85°C.
Range of adjustable pressure reducing valves with stainless steel bodies and an EPDM diaphragm. The JXP200X model: ½” - 2” sizes also include a gauge port. Maximum inlet supply pressure 16.0 bar. Outlet pressures are adjustable as follows: XXP150X and J2XP100X models between 1.0 to 16.0 bar, JXP200X models between 0.6 to 16.0 bar. Maximum operating temperature 85°C.
Range of pre-set, spring loaded, angled pressure relief valves (set at various pressure, see models), with plastic bodies. The valves are fitted with either rotary type easing gear or hand operated lifting gear. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.
Range of latching solenoid valves with DZR brass bodies, EPDM diaphragms and ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C
Latching solenoid valve with a black plastic body and an EPDM diaphragm. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Range of spherical valves incorporating bronze bodies, chromium plated brass ball, PTFE seat and lever operating members. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of spherical valves with brass bodies incorporating a chrome plated brass ball and a lockable operating mechanism. Maximum working pressure; 16 Bar Maximum operating temperature; 23°c
Range of in-line spherical valves with brass or nickel-plated brass bodies (see model), chrome plated ball, PTFE seats and EPDM O-rings. The products are supplied with either a lever operating member, magnetic lockable operating member, red or yellow butterfly handle or short lever operating member (see model). Compression and pressfit connections are for use with PEX/AL/PEX multilayer pipes manufactured to EN ISO 21003. The pressfit connection jointing is achieved via a crimping tool using a ‘U’ or ‘TH’ profile. Maximum working pressures: 255, 256 and 257 models: 20.0 bar, All other models: 16.0 bar. Maximum operating temperatures: 201, 207 and 209 models: 90°C, All other models: cold water only.
Range of in-line spherical valves with a nickel-plated brass body, chromium plated brass ball, PTFE seats and EPDM ‘O’-rings. The products are supplied with a lever or a butterfly handle (models with BH suffix). Compression end connections are for use with copper pipe or Irish copper pipe ((IS) models) (manufactured to EN1057). Maximum working pressures: S0231 prefix models: 16.0 bar. S0232 prefix models: 25.0 bar. Maximum operating temperature 85°C.
Page 585 of 590
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
