Range of pressure transmitters with stainless steel bodies. Maximum working pressure 100.0 Bar Maximum operating temperature 80.0°C (Type 540) or 100.0°C (Type 520 & Type 522)
Range of flanged ball type non-return valves with blue epoxy coated ductile iron bodies, EPDM lined ductile iron balls, and EPDM gaskets. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of electromagnetic flow meters with an epoxy coated (grey) carbon steel bodies, EPDM inner liner and stainless-steel electrodes. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.
Range of standpipes for bath/showers with a brass body (various finishes, see model). The standpipes incorporate an approved flexible hose. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.
Range of multistage pumps with stainless steel bodies Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
MBC 12-22WM & MBC 12-28WM models are wall mounted mains supply booster sets. They are supplied with two spherical isolation valves, a spherical bypass valve and two single check valve assemblies (suitable for backflow protection against Fluid Category 2). The check valve assemblies are to be installed in accordance with the manufacturers instructions, one upstream of the pump inlet and one after the bypass valve. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet and is housed within a wall mounted cabinet. MJ3 VM & MJ3 HM models are mains supply booster sets intended to be mounted on an expansion vessel (not supplied as part of the approval). They comprise of a pump, a suction and discharge manifold with bypass arrangement, and a spherical bypass valve which incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The booster pump incorporates a plastic strainer on the inlet and a plastic flow regulator on the outlet. Maximum working pressure: 6.0 bar. Maximum operating temperature: 35oC.
Range of booster pumps with stainless steel inlet manifolds, plastic bodies and impellers. The product incorporates a non-return valve. The ESYBOX MAX single models are also supplied with an optional 2” BSP (M) x 1¼” BSP (F) plastic inlet adaptor. Maximum working pressure 12.0 bar. Cold water use only.
Circulation pumps with either bronze or stainless pump bodies and a plastic impeller. Maximum supply pressure 10.0 bar. Maximum operating temperature 85°C.
Range of inline (301) or angle pattern (302) radiator valves with nickel-plated brass bodies, PTFE seats and EPDM sealing rings. The products are supplied with a dome operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.
Range of overhead shower outlets incorporating plastic bodies with an adjustable brass ball joint. Open outlet Maximum operating temperature 48.0°C
Chrome plated shower handset with ABS body and NBR O-rings. Open outlet use only. Maximum operating temperature 60°C
Range of shower outlets and shower sets, the inlet incorporates a single check valve cartridge (however the complete assembly has not been tested to demonstrate it provides adequate backflow protection). The product incorporates a flow regulator. Open outlet use only. Maximum operating temperature 70°C
Range of wall mounted shower heads with (chrome plated brass finish). The inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The outlet incorporates a plastic aerator. Open outlet use only. Maximum operating temperature PD15251: 65°C and AT89051:70 °C
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SD1044 | Chrome | 1/2" BSP | open outlet bar | 75 °C | Delmei | on board | No | ||||
| SD1061 | Chrome | 1/2" BSP | open outlet bar | 75 °C | Delmei | on board | No | ||||
| SD1062 | Chrome | 1/2" BSP | open outlet bar | 75 °C | Delmei | on board | No | ||||
| SD1064 | Chrome | 1/2" BSP | open outlet bar | 75 °C | Delmei | on board | No |
Range of Y-patterned strainers with blue epoxy coated ductile iron bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of Y-patterned strainers with blue epoxy coated ductile iron bodies and a stainless-steel mesh strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| N BIB C | Chrome 6 | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Indices | No | 1/4 Turn ceramic disc | Not Applicable | Flow Straightener | |
| RP3 N BIB C | Chrome 3 | 1/2" BSP (M) | 5.0 bar | 65 °C | Bristan | Indices | No | 1/4 Turn ceramic disc | Not Applicable | Flow Straightener |
Range of drain taps with brass or DZR brass body (some models chrome plated) and rising spindle headwork. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Pillar taps (brass bodies – various finishes) incorporating a quarter turn ceramic disc headworks with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 Bar, Maximum operating temperature 65°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TPASHBAS3 | Chromed | BSP 1/2" (M) | 10 bar | 65 °C | Lecico | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| TPASHBATH3 | Chromed | BSP 3/4" (M) | 10 bar | 65 °C | Lecico | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Aerator | |
| TPSOUBAS3 | Chromed | BSP 1/2" (M) | 10 bar | 65 °C | Lecico | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | |
| TPSOUBATH3 | Chromed | BSP 3/4" (M) | 10 bar | 65 °C | Lecico | Rear of body | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener |
Page 571 of 590
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
