Directory Search Results

Print List

#2311368

Single hole, single outlet (swivel) combination tap assembly (chromium plated brass bodies), incorporating a ceramic cartridge headwork with a single lever operating member. The outlet is a pull down spray type and incorporates a plastic aerator. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2311368
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating 15mm compression connections.
Marking:
TP on Body
Installation Requirements:
R001 R090
Expiry date:
30/11/2028
Model:
546880 Albi Tight Coil Sink Mixer Chrome

Approval Holder:
Travis Perkins PLC
Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2312017

Range of single hole, single outlet (fixed) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Some products are supplied with a lever type or click-type pop up waste. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2312017
Note:
Click type waste has been verified by test.
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” BSP (F) captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2028
Model:
31 513 xxx (without waste) 31 517 xxx (without waste) 31 915 xxx (without waste) 31 917 xxx (without waste) 31 574 xxx (click type waste) 31 518 xxx (without waste) 31 603 xxx (lever type waste) 31 607 xxx (lever type waste) 31 608 xxx (lever type waste) 31 621 xxx (lever type waste) 31 911 xxx (lever type waste) 31 578 xxx (click type waste) Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as example: 000 = chrome optic finish, PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2312025

Single hole, single outlet (with additional outlets for filtered cold water), fixed, combination tap assembly (various plated brass), incorporating a ceramic cartridge headwork and single lever operating member. The tap body incorporates an additional push type headwork that controls the flow to a second outlet. Both outlets incorporate plastic aerators. The product is supplied with a filter assembly supplied via a brass connecting tee. Models incorporate approved single check valve cartridges; however, the complete assembly has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2312025
Size:
Stainless steel braided PEX lined hose with 3/8" BSP captive nut (tap connection) and Stainless steel braided TPSiV lined hose with 3/8" BSP captive nut (filter connection).
Marking:
Hansgrohe on tap body.
Installation Requirements:
R001 R006 R009 R150 R170
Expiry date:
31/12/2028
Model:
Aqittura M91 - 76 802 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2312911

Range of single-hole, single outlet, fixed, combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. The products are supplied with click-type pop up wastes. Maximum operating pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2312911
Note:
Pop up waste (verified by test)
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 15mm compression end connections.
Marking:
BRISTAN on the body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/12/2028
Model:
HOU ES BAS C HOU ES BAS BB HOU ES BAS BLK

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#2311077

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes) incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Model V7K33YY-XX incorporates an additional outlet for a side spray connection. Maximum working pressure 3.0 Bar Maximum operating temperature 70.0°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2311077
Note:
V7K33YY-XX is not supplied with a hose or a hand spray outlet.
Size:
Stainless steel braided PEX lined flexible hose assemblies with 1/2" BSP captive nut end connections.
Marking:
Samuel Heath on body
Installation Requirements:
R001 R009 R090
Expiry date:
30/11/2028
Model:
V7K32YY-XX V7K33YY-XX Models: Landmark V7K32YY-XX, V7K33YY-XX Controllers V759-LF-XX, V759-LK-XX, V759-LL-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = Chrome Finish, URM = Urban Brass Matt Lacquered. Where the product code suffix ‘YY’ denotes the lever options. It will always be 1, 2 or 3 digits, which can be any combination of letters. As examples: LK = Industrial Lever, or LF = Pure Lever

Approval Holder:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:
Samuel Heath & Sons Plc
Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

Print This Approval


#2311917

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2311917
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Model 263726 Iflo on tap body Model 352755 CPS on tap body
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2028
Model:
263726 IFLO Kisdon Monobloc Sink Mixer Chrome & 352755 Laval Monobloc Sink Mixer Chrome

Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval


#2310394

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge. The inlets incorporate stainless steel strainers. The spout outlets incorporate a plastic aerator or a flow straightener. Maximum working pressure 10 Bar. Maximum operating temperature 65 °C.

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2310394
Size:
Stainless steel braided EPDM lined hose assembly incorporating ½” BSP captive nut end connections
Marking:
TP on body
Installation Requirements:
R001 R006 R010
Expiry date:
31/10/2028
Model:
Ceramic Cartridge 352807 Arras Mono Swan Neck Sink Mixer Chrome

Approval Holder:
Travis Perkins PLC
Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2311918

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies – various finishes), incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator or flow straightener. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2311918
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
T[P on body.
Installation Requirements:
R001 R006 R010
Expiry date:
30/11/2028
Model:
546822 Contemporary Monobloc Sink Mixer Chrome 546825 Contemporary Monobloc 854368 Chantilly Monoblock Sink Mixer Matt 854367 Chantilly Monoblock Sink Mixer Brushed Brass 934960 Traditional Monobloc Sink Mixer Chrome 740892 Traditional Monobloc Mixer Brushed 158715 Talence Monobloc Sink Mixer Chrome 740922 Talence Monobloc Sink Mixer Brushed

Approval Holder:
Travis Perkins PLC
Company Name
Travis Perkins PLC
Address
Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#2402700

Range of single-hole, single outlet (swivel) combination tap assemblies, (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 Bar

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
2402700
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
The 1810 Company Ltd logo on handle
Installation Requirements:
R001 R006 R009 R010
Expiry date:
28/02/2029
Model:
DAV/01/CH (Chrome) DAV/02/BS (Brushed Steel)

Approval Holder:
The 1810 Company limited
Company Name
The 1810 Company limited
Address
Units 14-16, Bromfield Industrial Estate, Queens Lane Mold
Postcode
CH7 1JR
Phone
0044 7772144600

View All Listings by this Company

Print This Approval


#240102077

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate plastic aerators. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
0470 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a swivel spout.
WRAS Approval Number:
240102077
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ⅜” captive nut end connections.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/01/2029
Model:
71 832 xx0 71 833 xx0 71 839 xx0 31 816 xx0 71 860 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 569 of 1011

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.