Range of bib taps incorporating brass bodies. The BTHUCV1/2 and BTHUCV3/4 models incorporate an approved single check valve cartridge on the inlet and the outlet (hose union), however, the complete product has not been fully tested to demonstrate it provides backflow protection. The BTHUCV1/2 and BTHUCV3/4 models also incorporate a drain port. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1750 Taps

Section Subtitle:

Draw off, metal, bib. a. All cold water fittings located outside the thermal envelope, or those outside the building should be protected against damage by freezing. b. A servicing valve shall be fitted to the supply pipe to this fitting and shall be located within the thermal envelope of the building.

WRAS Approval Number:

2109379

Expiry date:

30/09/2026

Size:

BTHU1/2 & BTHUCV1/2 : ½” BSP (M), BTHU3/4 & BTHUCV3/4: ¾” BSP (M).

Marking:

CUB & SIZE ON BODY

Installation Requirements:

R001 R040

Model:

BTHU1/2, BTHU3/4, BTHUCV1/2 & BTHUCV3/4 BIB TAPS

Factor:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster

Postcode

DY11 7QN

View All Listings by this Company

Range of M type press fittings with TP2 copper bodies and EPDM ‘O’-rings, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2110393

Expiry date:

31/10/2026

Size:

See model.

Marking:

Cupro Fit and size on body.

Installation Requirements:

R001

Model:

EKYH0000, Equal coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0002, Straight coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0003, Reducing coupler: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0004, Fitting reducer: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0005, Female adapter: S15*1/2FC‐G S22*3/4FC‐G S28*1FC‐G S35*1 1/4FC‐G S42*1 1/2FC‐G S54*2FC‐G Note: FC‐G is female BSPP EKYH0006, Male adapter: S15*1/2MC‐ZG S15*3/4MC‐ZG S22*3/4MC‐ZG S22*1MC‐ZG S28*1MC‐ZG S35*1 1/4MC‐ZG S42*1 1/2MC‐ZG S54*2MC‐ZG Note: MC‐ZG is male BSPT EKYH0012, Long straight coupling: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0100, 90° Elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0101, 90° Street elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0104, Reducing elbow: 22mm*15mm 28mm*15mm 28mm*22mm EKYH0130, 45° Elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0131, 45° Street elbow: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0166, Crossover:15mm, 22mm, 28mm EKYH0167, Part crossover: 15mm, 22mm, 28mm EKYH0201, Equal Tee: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0202, Reducing tee: 22mm*22mm*15mm 28mm*28mm*15mm 28mm*22mm*15mm 35mm*35mm*15mm 35mm*35mm*22mm 35mm*35mm*28mm 42mm*42mm*15mm 42mm*42mm*22mm 42mm*42mm*28mm 42mm*42mm*35mm 54mm*54mm*15mm 54mm*54mm*22mm 54mm*54mm*28mm 54mm*54mm*35mm 54mm*54mm*42mm 22mm*15mm*15mm 22mm*15mm*22mm 28mm*15mm*15mm 28mm*15mm*22mm 28mm*15mm*28mm 28mm*22mm*15mm 28mm*22mm*22mm 28mm*22mm*28mm 15mm*15mm*22mm 22mm*22mm*28mm EKYH0301, Cap, size: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm

Factor:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster

Postcode

DY11 7QN

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107337

Expiry date:

31/07/2026

Size:

See model

Marking:

CUPRO-FIT & size on body.

Installation Requirements:

R001

Model:

PRESS FIT 90° Elbow: PFEL15, PFEL22, PFEL28, PFEL35, PFEL42, PFEL54 PRESS FIT 90° Street Elbow: PFELS15, PFELS22, PFELS28, PFELS35, PFELS42, PFELS54 PRESS FIT 45° Elbow: PFEL1545, PFEL2245, PFEL2845, PFEL3545, PFEL4245, PFEL5445 PRESS FIT 45° Street Elbow: PFELS1545, PFELS2245, PFELS2845, PFELS3545, PFELS4245, PFELS5445 PRESS FIT Full Crossover PFFCO15, PFFCO22, PFFCO28 PRESS FIT Part Crossover PFPCO15, PFPCO22. PFPCO28 PRESS FIT Coupler&Slip Coupler PFCO15, PFCO22, PFCO28, PFCO35, PFCO42, PFCO54 PFSC15, PFSC22, PFSC28, PFSC35, PFSC42, PFSC54 PRESS FIT Equal Tee PFTE15, PFTE22, PFTE28, PFTE35, PFTE42, PFTE54 PRESS FIT Reducing TEE PFTE151522, PFTE 221515, PFTE 221522 PFTE 222215, PFTE 222228, PFTE 281515 PFTE 281522, PFTE 282215, PFTE 282222 PFTE 282228, PFTE 282815, PFTE 282822 PFTE 282835, PFTE 352222, PFTE 352235 PFTE 352822, PFTE 352828, PFTE 352835 PFTE 353515, PFTE 353522, PFTE 353528 PFTE 402828, PFTE 423535, PFTE 422842 PFTE 423542, PFTE 424215, PFTE 424222 PFTE 424228, PFTE 424235, PFTE 545415 PFTE 545428, PFTE 545435, PFTE 544242 PFTE 545442 PRESS FIT Fitting Reducer FTGXC PFRE2215, PFRE 2815, PFRE 2822, PFRE 3515 PFRE 3522, PFRE 3528, PFRE 4215, PFRE 4222 PFRE 4228, PFRE 4235, PFRE 5415, PFRE 5422 PFRE 5428, PFRE 5435, PFRE 5442 PRESS FIT Reducer Coupler CXC PFRC2215, PFRC 2815, PFRC 2822, PFRC 3515 PFRC 3522, PFRC 3528, PFRC 4215, PFRC 4222 PFRC 4228, PFRC 4235, PFRC 5415, PFRC 5422 PFRC 5428, PFRC 5435, PFRC 5442 PRESS FIT End Cap PFEC15, PFEC22, PFEC28, PFEC35, PFEC42, PFEC54

Factor:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster

Postcode

DY11 7QN

View All Listings by this Company