"PRESSTITE" range of press fittings with nickel plated brass bodies incorporating EPDM ‘O’-rings and stainless steel crimp sleeves for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved by a TH crimping profile. For above ground use only. Maximum working pressure 10.0 bar. 20 & 26mm pressfit sizes cold water use only. Threaded and pressfit 16mm size maximum operating temperature 95°C. From June 2025: The 20 & 26mm pressfit sizes maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240404724

Size:

Pressfit: 16, 20 & 26mm. Threaded: ½”, ¾” & 1” BSP (M)/(F) or captive nut.

Marking:

IDC logo: E mark (~E~ within circle), profile type (TH), size and PN on fitting body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

Straight PEX x PEX (press x press): 900310002 - 16mm x 16mm 900310003 - 20mm x 20mm 900310004 - 26mm x 26mm Reduce Straight PEX x PEX (press x press): 900310032 - 20mm x 16mm 900310042 - 26mm x 16mm 900310043 - 26mm x 20mm Straight PEX x Female (press x female): 900312003 - 20mm x 1/2"F 900312004 - 26mm x 3/4"F 900312023 - 16mm x 1/2"F 900312034 - 20mm x 3/4"F 900312045 - 26mm x 1"F Stop end (press): 900372002 - 16mm 900372003 - 20mm 900372004 - 26mm Elbow (press): 900315002 - 16mm 900315003 - 20mm 900315004 - 26mm Elbow PEX x Male (press x male): 900316023 - 16mm x 1/2"M 900316003 - 20mm x 1/2"M 900316034 - 20mm x 3/4"M 900316004 - 26mm x 3/4"M Elbow PEX x Female (press x female): 900317023 - 16mm x 1/2"F 900317003 - 20mm x 1/2"F 900317034 - 20mm x 3/4"F 900317004 - 26mm x 3/4"F Wall Plate PEX x Female (press x female): 900307023 - 16 x 1/2"F 900307003 - 20 x 1/2"F 900307034 - 20 x 3/4"F 900307004 - 26 x 3/4"F Equal Tee (press): 900318002 - 16mm 900318003 - 20mm 900318004 - 26mm Reduce Tee PEX(Left) x PEX(Right) x PEX(Middle) (press x press x press): 900318232 - 16 x 20 x 16 900318322 - 20 x 16 x 16 900318323 - 20 x 16 x 20 900318332 - 20 x 20 x 16 900318343 - 20 x 26 x 20 900318422 - 26 x 16 x 16 900318423 - 26 x 16 x 20 900318424 - 26 x 16 x 26 900318432 - 26 x 20 x 16 900318433 - 26 x 20 x 20 900318434 - 26 x 20 x 26 900318442 - 26 x 26 x 16 900318443 - 26 x 26 x 20 900318454 - 26 x 32 x 26 Reduce Tee PEX(Left) x PEX(Right) x Female(Middle) (press x female x press): 900330004 - 26 x 3/4"F x 20 900330023 - 16 x 1/2"F x 16 900330033 - 20 x 1/2"F x 20 900330034 - 20 x 3/4"F x 20 900330043 - 26 x 1/2"F x 26

Approval Holder:

Hevac Ltd

Company Name

Hevac Ltd

Address

Muirfield Drive Naas Road Dublin 12

Postcode

D12 X0A3

Country

Ireland

Phone

0035 314 191924

General Email

dave.grenville@hevac.ie

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Company Name

IDC Plumbing & Heating Technology (Beijing) Co., Ltd.

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Range of stainless-steel press fittings (SUS304 or 316L) with EPDM ‘O’-rings for use with stainless-steel pipe (SUS304 or 316L EN 10312), using an ‘M’ press profile. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

KPress logo, material and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HB-H15XXX - 45 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I15XXX - 45 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H16XXX - 45 Degree Plain End Elbow - SUS304 - 28, 35, 42, 54. HB-I16XXX - 45 Degree Plain End Elbow - SUS316L - 28, 35, 42, 54. HB-H07XXX - 90 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I07XXX - 90 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H08XXX - 90 Degree Female Thread Elbow - SUS304 - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-I08XXX - 90 Degree Female Thread Elbow - SUS316L - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-H09XXX - 90 Degree Male Thread Elbow - SUS304 - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-I09XXX - 90 Degree Male Thread Elbow - SUS316L - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-H14XXX - 90 Degree Plain End Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I14XXX - 90 Degree Plain End Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H18XXX - Cap - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I18XXX - Cap - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H01XXX - Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I01XXX - Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H03XXX - Male Thread Adapter - SUS304 - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-I03XXX - Male Thread Adapter - SUS316L - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-H24XXX - Plain End Coupling - SUS304 - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-I24XXX - Plain end Coupling - SUS316L - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-H02XXX - Reducing Coupling - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I02XXX - Reducing Coupling - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H13XXX - Reducing Cross - SUS304 - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-I13XXX - Reducing Cross - SUS316L - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-H06XXX - Reducing Tee - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I06XXX - Reducing Tee - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H19XXX - Slip Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I19XXX - Slip Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H11XXX - Tee with male Thread - SUS304 - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-I11XXX - Tee with male Thread - SUS316L - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-H20XXX - Union Adapter - SUS304 - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-I20XXX - Union Adapter - SUS316L - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-H05XXX - Equal Tee - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I05XXX - Equal Tee - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H12XXX - Equal Cross - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I12XXX - Equal Cross - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H10XXX - Tee with Female Thread - SUS304 - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-I10XXX - Tee with Female Thread - SUS316L - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-H00XXX - Stainless Steel Pipe - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I00XXX - Stainless Steel Pipe - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108.

Approval Holder:

Kesanitar GmbH

Company Name

Kesanitar GmbH

Address

Märkische Straße 12, 47809 Krefeld, NRW

Country

Germany

Phone

+49 2151 3624071

General Email

info@kesanitar.com

View All Listings by this Company

5000 series of copper end feed fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250708026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Eagle brand logo on fitting.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

5001A 90° Street bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5002G 90° Bent tap Connector 15mm x ½”, 15mm x ¾”, 22mm x ¾” 5002A 90° Bend 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5040 45° Street Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5041 45° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5085 Full Crossover 15mm, 22mm 5086 Partial Crossover 15mm, 22mm 5090 90° Elbow 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5090R 90° Elbow 22mm x 15mm 5092 90° Street Elbow 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5130 Equal Tee 8mm, 10mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm 5301 End Cap 15mm， 22mm， 28mm， 35mm， 42mm， 54mm 5130R Reducing Tee 15mmx22mmx15mm，22mmx15mmx15mm， 22mmx15mmx22mm，22mmx22mmx15mm， 22mmx28mmx22mm，28mmx15mmx15mm， 28mmx15mmx28mm，28mmx22mmx22mm， 28mmx22mmx28mm，28mmx28mmx15mm， 28mmx28mmx22mm，35mmx15mmx35mm， 35mmx22mmx35mm，35mmx28mmx28mm， 35mmx28mmx35mm，42mmx15mmx42mm， 42mmx22mmx42mm，42mmx28mmx42mm， 42mmx35mmx42mm，54mmx15mmx54mm， 54mmx22mmx54mm，54mmx28mmx54mm， 54mmx35mmx54mm，54mmx42mmx54mm 5240 Reducing Coupling 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5421 Metric imperial Coupling 15mm x ½”, 22mm x ¾” 5270 Straight Coupling 15mm， 22mm， 28mm, 35mm, 42mm, 54mm 5243 Fitting reducer 22mm x 15mm，28mm x 15mm，28mm x 22mm， 35mm x 15mm，35mm x 22mm，35mm x 28mm， 42mm x 15mm，42mm x 22mm，42mm x 28mm， 42mm x 35mm，54mm x 22mm，54mm x 28mm 54mm x 35mm, 54mm x 42mm 5359G Straight Tap Connector 15mm x 1/2"，15mm x 3/4"，22mm x 3/4"

Approval Holder:

SCE Technology (Ningbo) Co., Ltd

Company Name

SCE Technology (Ningbo) Co., Ltd

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang

Country

China

View All Listings by this Company

Dual flush, WC outlet valves for either full or reduced flush. Incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

R&T logo & model body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

A2415L, A2415M & A2706

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Dual flush, WC outlet valve operated via a lever operated assembly for either full or reduced flush. Incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

R&T logo & model on body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

A24233

Manufacturer:

Xiamen R&T Plumbing Technology Co.,Ltd

Company Name

Xiamen R&T Plumbing Technology Co.,Ltd

Address

No.18, Houxiang Road Haicang District Xiamen

Postcode

361022

Country

China

Phone

86-0592-3959422

View All Listings by this Company

Range of dual flush WC outlet valves operated via a push button assembly for either full or reduced flush and incorporates an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250902710

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” BSP (M)

Marking:

WDI, model & WRAS on body.

Installation Requirements:

R001 R556 R571

Expiry date:

30/09/2030

Model:

B4900-U B4900-G B4900H-U B4900H-G

Stainless steel plate heat exchangers with copper brazing.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

0.75 to 2”.

Marking:

UK Exchangers and product info on label.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

UKE-BR030 UKE-BR040 UKE-BR060H UKE-BR050 UKE-BR050R UKE-BR095H BR200L UKE-BR200M UKE-BR205 UKE-BRX12B

Approval Holder:

UK Exchangers Ltd

Company Name

UK Exchangers Ltd

Address

Unit 55 Stilebrook Road Olney

Postcode

MK46 5EA

Country

United Kingdom

General Email

alex@ukeltd.com

View All Listings by this Company

Near boiling hot water dispensers with stainless steel tanks and flow is controlled via float switch. Maximum working pressure 3 Bar. Maximum operating temperature 98°C.

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241202719

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

Alfred Victoria "crown" logo on front of body. Model and product info on label on rear of body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

F104M

Approval Holder:

ALFRED VICTORIA LIMITED

Company Name

ALFRED VICTORIA LIMITED

Postcode

B45 9AL

Country

United Kingdom

Phone

00441213592214

General Email

daisy.qin@alfredvictoria.co.uk

View All Listings by this Company

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) or 1” BSP (M)

Marking:

APATOR, date of manufacture (YYYY) and product information on face of water meter. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Maximum operating temperature 50°C: JS 1,6-02 JS 1,6-04 JS 1,6-NK JS 1,6-NKP JS 4-02 JS 4-04 JS 4-NK JS 4-NKP JS 2,5-02 JS 2,5-04 JS 2,5-NK JS 2,5-NKP JS 2,5-G1-02 JS 2,5-G1-04 JS 2,5-G1-NK JS 2,5-G1-NKP Maximum operating temperature 85°C: JS90 1,6-02 JS90 1,6-04 JS90 1,6-NK JS901,6-NKP JS90 2,5-02 JS90 2,5-04 JS90 2,5-NK JS90 2,5-NKP JS90 2,5-G1-02 JS90 2,5-G1-04 JS90 2,5-G1-NK JS90 2,5-G1-NKP JS90 4-02 JS90 4-04 JS90 4-NK JS90 4-NKP

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

Compact wall outlet elbow with brass body (various finishes). Maximum operating temperature 85.0°C Open outlet use only

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2030

Model:

1001359 ** ** Where ** ** denotes the finish and can be replaced with the following: AA = Chrome AD = Matt Black AH = Core Brushed Brass Post 24 (Xenia) AJ = Core Brushed Gunmetal Grey AQ = Aqualisa (Brand)

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company