Directory Search Results

Print List

#240902719

Ranges of sensor operated flow control devices either mains or battery powered, incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
10mm Spigot inlet x 1/2" BSP (M) outlet
Marking:
"D" logo & Dolphin on sensor unit.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
DB6220-aaa-bb/DB6225-aaa-bb DB620-aaa-bb /DB625-aaa-bb DB6210-aaa-bb /DB6215-aaa-bb DB6240-aaa-bb /DB6245-aaa-bb DB6250-aaa-bb /DB6255-aaa-bb DB6280-aaa-bb /DB6285-aaa-bb ‘0’ models (DBxx[x]0-xxx-xx) are 9V mains powered. '5' models (DBxx[x]5-xxx-xx) are 9V battery powered. ‘aaa’ denotes the external surface finish. ‘bb’ denotes the external surface colour.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#250302718

Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The Movitec VME models and VE/VSE models added May 2025 can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: Comeo C models 10.0 bar, Movitec VM models with an oval flange or VME models with integral check valve 16.0 bar, All other Movitec VM models 25.0 bar. Models added May 2025: Movitec V/VS models with an oval flange or VE models with integral check valve 16.0 bar, All other Movitec V/VS models and Movitec HI/HSI models 25.0 bar. Maximum operating temperatures: Existing models: Comeo C and Movitec VME models with integral check valve 60°C, all other model variants 100°C. Models added May 2025: Movitec VE models with integral check valve 60°C, all other model variants 100°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250302718
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Movitec VM (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Comeo C 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. Sizes added May 2025: Movitec V/VS (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Movitec V/VS (-/F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. Movitec V/VS F 25/40/60/90/125 B: Round flange: DN65, DN80, DN100, DN125. Movitec HI/HSI 2/4/6 B: 1¼” BSP or NPT (F). Movitec HI/HSI 10/15 B: 2” BSP or NPT (F).
Marking:
KSB logo, model name, PN, WRAS and technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
31/03/2030
Model:
Movitec VM (-/F/E/V/T) x yy B, Comeo C x yy B. Where: VM = Vertically oriented (AISI 304) with close coupled motor/ pump (pump/ motor shaft combined). No indication (VM only) = oval flange. F (VMF) = round flange. E (VME) = external tread. V (VMV) = Victaulic. T (VMT) = Triclamp. x = flow rate m³/h (2, 4 or 6). yy = no. of stages Movitec VM and Comeo C ranges 1-6 stages. Models added May 2025: Movitec V/VS (-/F/E/V/T) x yy B, Movitec V/VS (-/F/E/V/T) 15 yy C. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages Movitec V/VS……2 B 1-30 stages. Movitec V/VS……4/6 B 1-26 stages. Movitec V/VS……10 B 1-21 stages. Movitec V/VS……15 B/C 1-17 stages. -------------------------------------- Movitec V/VS F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90 or 125). yy = no. of stages Movitec V/VS……25 B 1-12 stages. Movitec V/VS……40/60 B 1-10 stages. Movitec V/VS……90 B 1-6 stages. Movitec V/VS……125 B 1-4 stages. -------------------------------------- Movitec HI/HSI x yy B, Movitec HI/HSI 15 yy C. Where: H = Vertically oriented (AISI 304). HS = Vertically oriented (AISI 316). I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages Movitec HI/HSI 2/4/6 B 1-14 stages. Movitec HI/HSI 10 B/15 B/15 C 1-8 stages.

Approval Holder:
KSB Manufacturing B.V.
Company Name
KSB Manufacturing B.V.
Address
Kalkovenweg 13 2401LI Alphen Aan Den Rijn
Country
Netherlands

View All Listings by this Company

Print This Approval


#250404710

Permanent magnet multi-stage centrifugal pump with a plastic body. The product is supplied with brass adaptors and a copper olive to convert to compression. The compression connections are for use with Irish copper pipe (manufactured to EN1057) (27.4mm size) and copper pipe (manufactured to EN1057) (28mm size). Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250404710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F) (pump body). 27.4mm or 28mm compression (adaptors).
Marking:
SHIMGE on body. ‘Shimge’, model, CE and maximum temperature on adhesive label on body of pump.
Installation Requirements:
R001 R415
Expiry date:
30/04/2030
Model:
CA600

Approval Holder:
Shimge Pump Industry (Zhejiang)Co.,Ltd.
Company Name
Shimge Pump Industry (Zhejiang)Co.,Ltd.
Address
No.3 Bihai Street, Eastern New Area, Wenling City, Taizou City Zhejiang Province.
Country
China
Phone
86 17614582624
General Email
pangxiyuan@shimge.com

View All Listings by this Company

Print This Approval


#250404716

Permanent magnet multi-stage centrifugal pump with a plastic body. The product is supplied with brass adaptors and a copper olive to convert to compression. The compression connections are for use with Irish copper pipe (manufactured to EN1057) (27.4mm size) and copper pipe (manufactured to EN1057) (28mm size). Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250404716
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F) (pump body). 27.4mm or 28mm compresson (adaptors).
Marking:
Stuart Turner logo - Monsoon Professional, temperature, pressure and serial number on data-plate on body.
Installation Requirements:
R001 R415
Expiry date:
30/04/2030
Model:
47729 Monsoon Professional

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#250402015

Range of shower sets incorporating either a wall elbow or wall elbow with hand shower, (chromium plated brass). The shower holder incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250402015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M
Marking:
28490660 & 28490970 - Dornbracht logo on wall cover 27802660, 27802970 & 27803660 - Dornbracht logo on wall cover. Dornbracht logo on shower handset
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
27802660 27802970 27803660 28490660 28490970 Alternative cover plates 2780xYYY – complete shower sets 28490xxx – wall elbows only (part of article 2780xYYY)

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#250408013

Range of overhead shower outlets brass and stainless-steel bodies in various finishes, incorporating stainless steel filter washers and flow regulators. Open outlet use only. Maximum operating temperature 85⁰C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250408013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Coalbrook logo on the upper face
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
XX 4013 YY, XX 4014 YY. XX denotes the name of the product, example CO – Coalbrook. Middle 4 numbers is a numeric code allocated to the model and remains constant. YY denotes the colour finish, examples are but not limited to – BN – Brushed Nickel. CP – Chrome. GM – Gunmetal. BB – Brushed Brass.

Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#250402055

Range of wall and ceiling mounted overhead shower outlets, (plastic bodies – various finishes). Both models incorporate a built-in pressure regulator. Maximum operating temperature 85°C. Open outlet use only

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250402055
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP M.
Marking:
GROHE logo on showerhead.
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
22121xxx - Grohe Rainshower Mono 310. Head shower set 422 mm, 1 spray. 22122xxx - Grohe Rainshower Mono 310. Head shower set ceiling 142 mm, 1 spray. Where xxx denotes finish, and can be replaced by the following: 000 – Chrome KF0 – phantom black

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#250602004

Range of wall mounted (chromium plated brass bodies) spray outlets, incorporating a plastic flow regulator at the inlet and a plastic aerator. Open outlet use only. Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250602004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Dornbracht on face plate
Installation Requirements:
R001 R040
Expiry date:
30/06/2030
Model:
36514979

Manufacturer:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0

View All Listings by this Company

Print This Approval


#250404021

Range of deck mounted pull out kits (various finishes) comprising of a shower handset, shower hose and a stainless steel braided silicone lined connecting hose. The shower handsets incorporate single check valve cartridges, however, the complete product has not been fully tested to demonstrate backflow protection. Maximum operating temperature: 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250404021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
½” BSP (F) Captive nut flexi hose S/S
Marking:
Gessi on mounting plate.
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
47227 EXTRACTABLE SHOWER AND BATH EDGE 47127 EXTRACTABLE SHOWER AND BATH EDGE

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#250404023

Range of shower outlets, (plastic bodies - chrome plated) incorporating a plastic flow regulator. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250404023
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0, 24 523 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set.
Marking:
Hansgrohe on face plate
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
24 520 XX0 24 521 XX0 24 530 XX0 24 531 XX0 24 540 XX0 24 541 XX0 24 550 XX0 24 551 XX0 24 573 180 300190XX 300191XX 300193XX 300194XX 310190XX 310193XX 310194XX 340190XX 340191XX Model added May 2025: 24 523 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 494 of 652

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.