Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve.
The Movitec VME models and VE/VSE models added May 2025 can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection.
Maximum working pressures:
Existing models:
Comeo C models 10.0 bar,
Movitec VM models with an oval flange or VME models with integral check valve 16.0 bar,
All other Movitec VM models 25.0 bar.
Models added May 2025:
Movitec V/VS models with an oval flange or VE models with integral check valve 16.0 bar,
All other Movitec V/VS models and Movitec HI/HSI models 25.0 bar.
Maximum operating temperatures:
Existing models:
Comeo C and Movitec VME models with integral check valve 60°C, all other model variants 100°C.
Models added May 2025:
Movitec VE models with integral check valve 60°C, all other model variants 100°C.
- Section:
- 1610 Pumps
- Section Subtitle:
- Wholesome water use.
- WRAS Approval Number:
- 250302718
- Basis of Compliance:
- Tested to regulators Specification Test Code Sheets
- Size:
- Movitec VM (-/F/E/V/T) 2/4/6 B:
Oval flange: DN25, DN32.
Round flange: DN25, DN32.
External threaded: 1½” BSP (M),
Victaulic: DN32 and
Tri-clamp: DN32.
Comeo C 2/4/6 B:
1¼” BSP (F) inlet x 1” BSP (F) outlet.
Sizes added May 2025:
Movitec V/VS (-/F/E/V/T) 2/4/6 B:
Oval flange: DN25, DN32.
Round flange: DN25, DN32.
External threaded: 1½” BSP (M),
Victaulic: DN32 and
Tri-clamp: DN32.
Movitec V/VS (-/F/E/V/T) 10 B/15 B/15 C:
Oval flange: DN40, DN50.
Round flange: DN40, DN50.
External threaded: 1½” BSP (M),
Victaulic: DN50 and
Tri-clamp: DN50.
Movitec V/VS F 25/40/60/90/125 B:
Round flange: DN65, DN80, DN100, DN125.
Movitec HI/HSI 2/4/6 B:
1¼” BSP or NPT (F).
Movitec HI/HSI 10/15 B:
2” BSP or NPT (F).
- Marking:
- KSB logo, model name, PN, WRAS and technical information on adhesive label on body.
- Installation Requirements:
- R001 R415
- Expiry date:
- 31/03/2030
- Model:
-
Movitec VM (-/F/E/V/T) x yy B,
Comeo C x yy B.
Where:
VM = Vertically oriented (AISI 304) with close coupled motor/ pump (pump/ motor shaft combined).
No indication (VM only) = oval flange.
F (VMF) = round flange.
E (VME) = external tread.
V (VMV) = Victaulic.
T (VMT) = Triclamp.
x = flow rate m³/h (2, 4 or 6).
yy = no. of stages
Movitec VM and Comeo C ranges 1-6 stages.
Models added May 2025:
Movitec V/VS (-/F/E/V/T) x yy B,
Movitec V/VS (-/F/E/V/T) 15 yy C.
Where:
V = Vertically oriented (AISI 304) with coupling.
VS = Vertically oriented (AISI 316) with coupling.
No indication (V/VS only) = oval flange.
F (VF/VSF) = round flange.
E (VE) = external thread.
V (VV/VSV) = Victaulic.
T (VT/VST) = Triclamp.
x = flow rate m³/h (2, 4, 6, 10, 15).
yy = no. of stages
Movitec V/VS……2 B 1-30 stages.
Movitec V/VS……4/6 B 1-26 stages.
Movitec V/VS……10 B 1-21 stages.
Movitec V/VS……15 B/C 1-17 stages.
--------------------------------------
Movitec V/VS F xx yy B.
Where:
V = Vertically oriented (AISI 304) with coupling.
VS = Vertically oriented (AISI 316) with coupling.
F (VF/VSF) = round flange.
x = flow rate m³/h (25, 40, 60, 90 or 125).
yy = no. of stages
Movitec V/VS……25 B 1-12 stages.
Movitec V/VS……40/60 B 1-10 stages.
Movitec V/VS……90 B 1-6 stages.
Movitec V/VS……125 B 1-4 stages.
--------------------------------------
Movitec HI/HSI x yy B,
Movitec HI/HSI 15 yy C.
Where:
H = Vertically oriented (AISI 304).
HS = Vertically oriented (AISI 316).
I = Inner thread connection.
x = flow rate m³/h (2, 4, 6, 10 or 15).
yy = no. of stages
Movitec HI/HSI 2/4/6 B 1-14 stages.
Movitec HI/HSI 10 B/15 B/15 C 1-8 stages.
Product Images
- Approval Holder:
- KSB Manufacturing B.V.
Company Name
KSB Manufacturing B.V.
Address
Kalkovenweg 13
2401LI
Alphen Aan Den Rijn
View All Listings by this Company
