Hyddro Range of stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with Hyddro stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303406

Size:

see model

Marking:

Hyddro by GFS, size & material on pipe and fitting body.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Male threaded coupler: HYD-SS-MC-01 S15х1/2"W: 15 x ½” BSP (M) HYD-SS-MC-02 S15х3/4"W: 15 x ¾” BSP (M) HYD-SS-MC-03 S18х1/2"W: 18 x ½” BSP (M) HYD-SS-MC-04 S18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MC-05 S22х1/2"W: 22 x ½” BSP (M) HYD-SS-MC-06 S22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MC-07 S22х1"W: 22 x 1” BSP (M) HYD-SS-MC-08 S28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MC-09 S28x1"W: 28 x 1” BSP (M) HYD-SS-MC-10 S35x1"W: 35 x 1” BSP (M) HYD-SS-MC-11 S35x1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MC-12 S42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MC-13 S54х2"W: 54 x 2” BSP (M). Male threaded coupler with straight pipe: HYD-SS-MP-01 15х1/2"W: 15 x ½” BSP (M) HYD-SS-MP-02 15x3/4"W: 15 x ¾” BSP (M) HYD-SS-MP-03 18х1/2"W: 18 x ½” BSP (M) HYD-SS-MP-04 18х3/4"W: 18 x ¾” BSP (M) HYD-SS-MP-05 18x1"W: 18 x 1” BSP (M) HYD-SS-MP-06 22х1/2"W: 22 x ½” BSP (M) HYD-SS-MP-07 22х3/4"W: 22 x ¾” BSP (M) HYD-SS-MP-08 22x1"W: 22 x 1” BSP (M) HYD-SS-MP-09 28х3/4"W: 28 x ¾” BSP (M) HYD-SS-MP-10 28х1"W: 28 x 1” BSP (M) HYD-SS-MP-11 35х1 1/4"W: 35 x 1¼” BSP (M) HYD-SS-MP-12 42х1 1/2"W: 42 x 1½” BSP (M) HYD-SS-MP-13 54х2"W: 54 x 2” BSP (M). Female threaded coupler: HYD-SS-FC-01 S15х1/2"N: 15 x ½” BSP (F) HYD-SS-FC-02 S18х1/2"N: 18 x ½” BSP (F) HYD-SS-FC-03 S18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FC-04 S22х1/2"N: 22 x ½” BSP (F) HYD-SS-FC-05 S22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FC-06 S28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FC-07 S28х1"N: 28 x 1” BSP (F) HYD-SS-FC-08 S35x1"N: 35 x 1” BSP (F) HYD-SS-FC-09 S35x1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FC-10 S42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FC-11 S54х2"N: 54 x 2” BSP (F). Female threaded coupler with straight pipe: HYD-SS-FP-01 15х1/2"N: 15 x ½” BSP (F) HYD-SS-FP-02 15x3/4"N: 15 x ¾” BSP (F) HYD-SS-FP-03 18х1/2"N: 18 x ½” BSP (F) HYD-SS-FP-04 18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FP-05 18x1"N: 18 x 1” BSP (F) HYD-SS-FP-06 22х1/2"N: 22 x ½” BSP (F) HYD-SS-FP-07 22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FP-08 22x1"N: 22 x 1” BSP (F) HYD-SS-FP-09 28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FP-10 28х1"N: 28 x 1” BSP (F) HYD-SS-FP-11 35х1 1/4"N: 35 x 1¼” BSP (F) HYD-SS-FP-12 42х1 1/2"N: 42 x 1½” BSP (F) HYD-SS-FP-13 54х2"N: 54 x 2” BSP (F). Coupler: HYD-SS-CP-01 S15: 15 x 15mm HYD-SS-CP-02 S18х15: 18 x 15mm HYD-SS-CP-03 S18: 18 x 18mm HYD-SS-CP-04 S22х18: 22 x 18mm HYD-SS-CP-05 S22х15: 22 x 15mm HYD-SS-CP-06 S22: 22 x 22mm HYD-SS-CP-07 S28х15: 28 x 15mm HYD-SS-CP-08 S28х22: 28 x 22mm HYD-SS-CP-09 S28: 28 x 28mm HYD-SS-CP-10 S35х28: 35 x 28mm HYD-SS-CP-11 S35: 35 x 35mm HYD-SS-CP-12 S42х35: 42 x 35mm HYD-SS-CP-13 S42: 42 x 42mm HYD-SS-CP-14 S54х42: 54 x 42mm HYD-SS-CP-15 S54: 54 x 54mm. Coupler with straight pipe: HYD-SS-SP-01 S18х15Ⅱ: 18 x 15mm HYD-SS-SP-02 S22х15Ⅱ: 22 x 15mm HYD-SS-SP-03 S22х18Ⅱ: 22 x 18mm HYD-SS-SP-04 S28х15Ⅱ: 28 x 15mm HYD-SS-SP-05 S28х18Ⅱ: 28 x 18mm HYD-SS-SP-06 S28х22Ⅱ: 28 x 22mm HYD-SS-SP-07 S35х15Ⅱ: 35 x 15mm HYD-SS-SP-08 S35х18Ⅱ: 35 x 18mm HYD-SS-SP-09 S35х22Ⅱ: 35 x 22mm HYD-SS-SP-10 S35х28Ⅱ: 35 x 28mm HYD-SS-SP-11 S42х22Ⅱ: 42 x 22mm HYD-SS-SP-12 S42х28Ⅱ: 42 x 28mm HYD-SS-SP-13 S42х35Ⅱ: 42 x 35mm HYD-SS-SP-14 S54х28Ⅱ: 54 x 28mm HYD-SS-SP-15 S54х35Ⅱ: 54 x 35mm HYD-SS-SP-16 S54х42Ⅱ: 54 x 42mm. Adjustable connector: HYD-SS-AC-01 S15Ⅱ: 15 x 15mm HYD-SS-AC-02 S18Ⅱ: 18 x 18mm HYD-SS-AC-03 S22Ⅱ: 22 x 22mm HYD-SS-AC-04 S28Ⅱ: 28 x 28mm HYD-SS-AC-05 S35Ⅱ: 35 x 35mm HYD-SS-AC-06 S42Ⅱ: 42 x 42mm HYD-SS-AC-07 S54Ⅱ: 54 x 54mm. Union: HYD-SS-UN-01 H15х1/2": 15 x ½” captive nut HYD-SS-UN-02 H15х3/4": 15 x ¾” captive nut HYD-SS-UN-03 H18х1/2": 18 x ½” captive nut HYD-SS-UN-04 H18х3/4": 18 x ¾” captive nut HYD-SS-UN-05 H22х1/2": 22 x ½” captive nut HYD-SS-UN-06 H22х3/4": 22 x ¾” captive nut HYD-SS-UN-07 H28х3/4": 28 x ¾” captive nut HYD-SS-UN-08 H28х1": 28 x 1” captive nut HYD-SS-UN-09 H35x1": 35 x 1” captive nut HYD-SS-UN-10 H35x1 1/4": 35 x 1¼” captive nut HYD-SS-UN-11 H42х1 1/2": 42 x 1½” captive nut HYD-SS-UN-12 H54х2": 54 x 2” captive nut Tee: HYD-SS-TE-01 T15: 15 x 15 x 15mm HYD-SS-TE-02 T18х15х18: 18 x 15 x 18mm HYD-SS-TE-03 T18: 18 x 18 x 18mm HYD-SS-TE-04 T22х18х22: 22 x 18 x 22mm HYD-SS-TE-05 T22х15х22: 22 x 15 x 22mm HYD-SS-TE-06 T22: 22 x 22 x 22mm HYD-SS-TE-07 T28x15x28: 28 x 15 x 28mm HYD-SS-TE-08 T28х22х22: 28 x 22 x 22mm HYD-SS-TE-09 T28x22x28: 28 x 22 x 28mm HYD-SS-TE-10 T28: 28 x 28 x 28mm HYD-SS-TE-11 T35x15x35: 35 x 15 x 35mm HYD-SS-TE-12 T35x22x35: 35 x 22 x 35mm HYD-SS-TE-13 T35x28x35: 35 x 28 x 35mm HYD-SS-TE-14 T35: 35 x 35 x 35mm HYD-SS-TE-15 T42х35х42: 42 x 35 x 42mm HYD-SS-TE-16 T42: 42 x 42 x 42mm HYD-SS-TE-17 T54х42х54: 54 x 42 x 54mm HYD-SS-TE-18 T54: 54 x 54 x 54mm. Female threaded Tee: HYD-SS-FT-01 T15х1/2"Nx15: 15 x ½” BSP (F) x 15mm HYD-SS-FT-02 T18х1/2"Nx18: 18 x ½” BSP (F) x 18mm HYD-SS-FT-03 T18х3/4"Nx18: 18 x ¾” BSP (F) x 18mm HYD-SS-FT-04 T22х1/2"Nx22: 22 x ½” BSP (F) x 22mm HYD-SS-FT-05 T22х3/4"Nx22: 22 x ¾” BSP (F) x 22mm HYD-SS-FT-06 T28х1/2"Nx28: 28 x ½” BSP (F) x 28mm HYD-SS-FT-07 T28х3/4"Nx28: 28 x ¾” BSP (F) x 28mm HYD-SS-FT-08 T28х1"Nx28: 28 x 1” BSP (F) x 28mm HYD-SS-FT-09 T35х1"Nx35: 35 x 1” BSP (F) x 35mm HYD-SS-FT-10 T35х1 1/4"Nx35: 35 x 1¼” BSP (F) x 35mm HYD-SS-FT-11 T42х1 1/2"Nх42: 42 x 1½” BSP (F) x 42mm HYD-SS-FT-12 T54х2"Nх54: 54 x 2” BSP (F) x 54mm. Male threaded Tee: HYD-SS-MT-01 T15х1/2"Wx15: 15 x ½” BSP (M) x 15mm HYD-SS-MT-02 T18х1/2"Wx18: 18 x ½” BSP (M) x 18mm HYD-SS-MT-03 T18х3/4"Wx18: 18 x ¾” BSP (M) x 18mm HYD-SS-MT-04 T22х1/2"Wx22: 22 x ½” BSP (M) x 22mm HYD-SS-MT-05 T22х3/4"Wx22: 22 x ¾” BSP (M) x 22mm HYD-SS-MT-06 T28х1/2"Wx28: 28 x ½” BSP (M) x 28mm HYD-SS-MT-07 T28х3/4"Wx28: 28 x ¾” BSP (M) x 28mm HYD-SS-MT-08 T28х1"Wx28: 28 x 1” BSP (M) x 28mm HYD-SS-MT-09 T35х1"Wx35: 35 x 1” BSP (M) x 35mm HYD-SS-MT-10 T35х1 1/4"Wx35: 35 x 1¼” BSP (M) x 35mm HYD-SS-MT-11 T42х1 1/2"Wх42: 35 x 1½” BSP (M) x 35mm HYD-SS-MT-12 T54х2"Wх54: 54 x 2” BSP (M) x 54mm. 90°B Elbow: HYD-SS-BE-01 L15a: 15 x 15mm HYD-SS-BE-02 L18а: 18 x 18mm HYD-SS-BE-03 L22a: 22 x 22mm HYD-SS-BE-04 L28a: 28 x 28mm HYD-SS-BE-05 L35a: 35 x 35mm HYD-SS-BE-06 L42а: 42 x 42mm HYD-SS-BE-07 L54а: 54 x 54mm. 90°A Elbow: HYD-SS-AE-01 L15: 15 x 15mm, HYD-SS-AE-02 L18: 18 x 18mm HYD-SS-AE-03 L22: 22 x 22mm HYD-SS-AE-04 L28: 28 x 28mm HYD-SS-AE-05 L35: 35 x 35mm HYD-SS-AE-06 L42: 42 x 42mm HYD-SS-AE-07 L54: 54 x 54mm. Female threaded elbow: HYD-SS-FE-01 L15х1/2"N: 15 x ½” BSP (F) HYD-SS-FE-02 L18х1/2"N: 18 x ½” BSP (F) HYD-SS-FE-03 L18х3/4"N: 18 x ¾” BSP (F) HYD-SS-FE-04 L22х1/2"N: 22 x ½” BSP (F) HYD-SS-FE-05 L22х3/4"N: 22 x ¾” BSP (F) HYD-SS-FE-06 L28х3/4"N: 28 x ¾” BSP (F) HYD-SS-FE-07 L35х1"N: 35 x 1” BSP (F). Male threaded elbow: HYD-SS-ME-01 L15x1/2"W: 15 x ½” BSP (M) HYD-SS-ME-02 L18х1/2"W: 18 x ½” BSP (M) HYD-SS-ME-03 L18х3/4"W: 18 x ¾” BSP (M) HYD-SS-ME-04 L22x1/2"W: 22 x ½” BSP (M) HYD-SS-ME-05 L22x3/4"W: 22 x ¾” BSP (M) HYD-SS-ME-06 L28x3/4"W: 28 x ¾” BSP (M) HYD-SS-ME-07 L35x1"W: 35 x 1” BSP (M). Female threaded elbow with base: HYD-SS-FB-01 L15х1/2"N(a): 15 x ½” BSP (F) HYD-SS-FB-02 L18х1/2"N(a): 18 x ½” BSP (F) HYD-SS-FB-03 L22х1/2"N(a): 22 x ½” BSP (F) HYD-SS-FB-04 L22х3/4"N(a): 22 x ¾” BSP (F). 45°B Elbow: HYD-SS-OBE-01 45°L15a: 15 x 15mm HYD-SS-OBE-02 45°L18а: 18 x 18mm HYD-SS-OBE-03 45°L22a: 22 x 22mm HYD-SS-OBE-04 45°L28a: 28 x 28mm HYD-SS-OBE-05 45°L35a: 35 x 35mm HYD-SS-OBE-06 45°L42а: 42 x 42mm HYD-SS-OBE-07 45°L54а: 54 x 54mm. 45°A Elbow: HYD-SS-OAE-01 45°L15: 15 x 15mm HYD-SS-OAE-02 45°L18: 18 x 18mm HYD-SS-OAE-03 45°L22: 22 x 22mm HYD-SS-OAE-04 45°L28: 28 x 28mm HYD-SS-OAE-05 45°L35: 35 x 35mm HYD-SS-OAE-06 45°L42: 42 x 42mm HYD-SS-OAE-07 45°L54: 54 x 54mm One end pipe bridge: HYD-SS-PCO-01 Ω15a: 15 x 15mm HYD-SS-PCO-02 Ω18a: 18 x 18mm HYD-SS-PCO-03 Ω22a: 22 x 22mm Pipe Bridge: HYD-SS-FCO-01 Ω15: 15 x 15mm HYD-SS-FCO-02 Ω18: 18 x 18mm HYD-SS-FCO-03 Ω22: 22 x 22mm HYD-SS-FCO-04 Ω28: 28 x 28mm. Cap: HYD-SS-CAP-01 D15: 15 x 15mm HYD-SS-CAP-02 D18: 18 x 18mm HYD-SS-CAP-03 D22: 22 x 22mm HYD-SS-CAP-04 D28: 28 x 28mm HYD-SS-CAP-05 D35: 35 x 35mm HYD-SS-CAP-06 D42: 42 x 42mm HYD-SS-CAP-07 D54: 54 x 54mm Pipe: HYD-SS-PI-15 15mm HYD-SS-PI-22 22mm HYD-SS-PI-28 28mm HYD-SS-PI-35 35mm HYD-SS-PI-42 42mm HYD-SS-PI-54 54mm

Approval Holder:

Merchant Supplies Distribution Ltd

Company Name

Merchant Supplies Distribution Ltd

Address

Unit 2 Merlin Centre Acrewood Way St. Albans

Postcode

AL4 OJY

Phone

0203 915 2557

General Email

murat@gfsflex.com

View All Listings by this Company

Range of Hyddro press fittings incorporating EPDM ‘O’-rings. For use with Hyddro (S-1-0509/10/11/12/17/13) PEX-AL-PEX pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2304382

Size:

16-32mm. BSP threaded connections: ½” - 1½” (M) or (F).

Marking:

Hyddro by GFS and WRAS on fitting. Hyddro by GFS, WRAS, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

Straight: HYD-ST-0101 U (S1216) - 16mm HYD-ST-0102 U (S1418) - 18mm HYD-ST-0103 U (S1620) - 20mm HYD-ST-0104 U (S2025) - 25mm HYD-ST-0109 U (S2026) - 26mm HYD-ST-0105 U (S2632) - 32mm Reduced straight: HYD-RS-0202U (S20*16) 20x16mm HYD-RS-0203 U (S20*18) 20x18mm HYD-RS-0204 U (S25*16) 25x16mm HYD-RS-0205 U (S25*18) 25x18mm HYD-RS-0206 U (S25*20) 25x20mm HYD-RS-0223 U (S26*16) 26x16mm HYD-RS-0224 U (S26*18) 26x18mm HYD-RS-0225 U (S26*20) 26x20mm HYD-RS-0222 U (S32*16) 32x16mm HYD-RS-0226 U (S32*18) 32x18mm HYD-RS-0207 U (S32*20) 32x20mm HYD-RS-0208 U (S32*25) 32x25mm HYD-RS-0227 U (S32*26) 32x26mm. Male straight: HYD-MS-0301 U (S16*1/2"M) 16mmx1/2"Mr HYD-MS-0302 U (S16*3/4"M) 16mmx3/4"Mr HYD-MS-0303 U (S18*1/2"M) 18mmx1/2"Mr HYD-MS-0304 U (S18*3/4"M) 18mmx3/4"Mr HYD-MS-0305 U (S20*1/2"M) 20mmx1/2"Mr HYD-MS-0306 U (S20*3/4"M) 20mmx3/4"Mr HYD-MS-0307 U (S20*1"M) 20mmx1"M HYD-MS-0308 U (S25*1/2"M) 25mmx1/2"Mr HYD-MS-0309 U (S25*3/4"M) 25mmx3/4"Mr HYD-MS-0310 U (S25*1"M) 25mmx1"M HYD-MS-0326 U (S26*1/2"M) 26mmx1/2"Mr HYD-MS-0327 U (S26*3/4"M) 26mmx3/4"Mr HYD-MS-0328 U (S26*1"M) 26mmx1"M HYD-MS-0311 U (S32*1/2"M) 32mmx1/2"M HYD-MS-0312 U (S32*3/4"M) 32mmx3/4"M HYD-MS-0313 U (S32*1"M) 32mmx1"M HYD-MS-0314 U (S32*11/4"M) 32mmx11/4"M HYD-MS-0315 U (S32*11/2"M) 32mmx11/2"M Female straight: HYD-FS-0401 U (S16*1/2"F) 16mmx1/2"F HYD-FS-0402 U (S16*3/4"F) 16mmx3/4"F HYD-FS-0403 U (S16*1"F) 16mmx1"F HYD-FS-0404 U (S18*1/2"F) 18mmx1/2"F HYD-FS-0405 U (S18*3/4"F) 18mmx3/4"F HYD-FS-0407 U (S20*1/2"F) 20mmx1/2"F HYD-FS-0408 U (S20*3/4"F) 20mmx3/4"F HYD-FS-0409 U (S20*1"F) 20mmx1"F HYD-FS-0410 U (S25*1/2"F) 25mmx1/2"F HYD-FS-0411 U (S25*3/4"F) 25mmx3/4"F HYD-FS-0412 U (S25*1"F) 25mmx1"F HYD-FS-0422 U (S26*1/2"F) 26mmx1/2"F HYD-FS-0423 U (S26*3/4"F) 26mmx3/4"F HYD-FS-0424 U (S26*1"F) 26mmx1"F HYD-FS-0413 U (S32*1/2"F) 32mmx1/2"F HYD-FS-0414 U (S32*3/4"F) 32mmx3/4"F HYD-FS-0415 U (S32*1"F) 32mmx1"F HYD-FS-0416 U (S32*11/4"F) 32mmx11/4"F HYD-FS-0417 U (S32*11/2"F) 32mmx11/2"F. Elbow: HYD-EL-0501 U (L1216) 16mm HYD-EL-0502 U (L1418) 18mm HYD-EL-0503 U (L1620) 20mm HYD-EL-0504 U (L2025) 25mm HYD-EL-0509 U (L2026) 26mm HYD-EL-0505 U (L2632) 32mm. Male elbow: HYD-ME-0801 U (L16*1/2"M) 16mmx1/2"M HYD-ME-0802 U (L16*3/4"M) 16mmx3/4"M HYD-ME-0803 U (L18*1/2"M) 18mmx1/2"M HYD-ME-0804 U (L18*3/4"M) 18mmx3/4"M HYD-ME-0805 U (L20*1/2"M) 20mmx1/2"M HYD-ME-0806 U (L20*3/4"M) 20mmx3/4"M HYD-ME-0813 U (L20*1"M) 20mmx1"M HYD-ME-0807 U (L25*1/2"M) 25mmx1/2"M HYD-ME-0808 U (L25*3/4"M) 25mmx3/4"M HYD-ME-0809 U (L25*1"M) 25mmx1"M HYD-ME-0815 U (L26*1/2"M) 26mmx1/2"M HYD-ME-0816 U (L26*3/4"M) 26mmx3/4"M HYD-ME-0817 U (L26*1"M) 26mmx1"M HYD-ME-0810 U (L32*1/2"M) 32mmx1/2"M HYD-ME-0811 U (L32*3/4"M) 32mmx3/4"M HYD-ME-0812 U (L32*1"M) 32mmx1"M HYD-ME-0814 U (L32*1 1/4"M) 32mmx11/4"M Female elbow: HYD-FE-0901 U (L16*1/2"F) 16mmx1/2"F HYD-FE-0902 U (L16*3/4"F) 16mmx3/4"F HYD-FE-0903 U (L18*1/2"F) 18mmx1/2"F HYD-FE-0904 U (L18*3/4"F) 18mmx3/4"F HYD-FE-0905 U (L20*1/2"F) 20mmx1/2"F HYD-FE-0906 U (L20*3/4"F) 20mmx3/4"F HYD-FE-0913 U (L20*1"F) 20mmx1"F HYD-FE-0907 U (L25*1/2"F) 25mmx1/2"F HYD-FE-0908 U (L25*3/4"F) 25mmx3/4"F HYD-FE-0909 U (L25*1"F) 25mmx1"F HYD-FE-0914 U (L26*1/2"F) 26mmx1/2"F HYD-FE-0915 U (L26*3/4"F) 26mmx3/4"F HYD-FE-0916 U (L26*1"F) 26mmx1"F HYD-FE-0910 U (L32*1/2"F) 32mmx1/2"F HYD-FE-0911 U (L32*3/4"F) 32mmx3/4"F HYD-FE-0912 U (L32*1"F) 32mmx1"F HYD-FE-0917 U (L32*1 1/4"F) 32mmx11/4"F Wall plated elbow: HYD-WE-1001 U (L16*1/2"F(A)) 16mmx1/2"F HYD-WE-1002 U (L16*3/4"F(A)) 16mmx3/4"F HYD-WE-1003 U (L18*1/2"F(A)) 18mmx1/2"F HYD-WE-1004 U (L20*1/2"F(A)) 20mmx1/2"F HYD-WE-1006 U (L20*3/4"F(A)) 20mmx3/4"F. Tee: HYD-TE-1101 U (T1216) 16mm HYD-TE-1102 U (T1418) 18mm HYD-TE-1103 U (T1620) 20mm HYD-TE-1104 U (T2025) 25mm HYD-TE-1109 U (T2026) 26mm HYD-TE-1105 U (T2632) 32mm. Reduced tee: HYD-RT-1202 U (T16*20*16) 16x20x16mm HYD-RT-1203 U (T16*25*16) 16x25x16 mm HYD-RT-1255 U (T16*26*16) 16x26x16mm HYD-RT-1204 U (T18*16*18) 18x16x18mm HYD-RT-1205 U (T18*20*18) 18x20x18mm HYD-RT-1206 U (T18*25*18) 18x25x18mm HYD-RT-1256 U (T18*26*18) 18x26x18mm HYD-RT-1207 U (T20*16*20) 20x16x20mm HYD-RT-1208 U (T20*18*20) 20x18x20mm HYD-RT-1209 U (T20*25*20) 20x25x20mm HYD-RT-1211 U (T25*16*25) 25x16x25mm HYD-RT-1259 U (T25*16*16) 25x16x16mm HYD-RT-1260 U (T26*16*16) 26x16x16mm HYD-RT-1212 U (T25*18*25) 25x18x25mm HYD-RT-1213 U (T25*20*25) 25x20x25mm HYD-RT-1214 U (T25*32*25) 25x32x25mm HYD-RT-1240 U (T20*26*20) 20x26x20mm HYD-RT-1241 U (T26*16*26) 26x16x26mm HYD-RT-1242 U (T26*18*26) 26x18x26mm HYD-RT-1243 U (T26*20*26) 26x20x26mm HYD-RT-1244 U (T26*32*26) 26x32x26mm HYD-RT-1215 U (T32*16*32) 32x16x32mm HYD-RT-1216 U (T32*18*32) 32x18x32mm HYD-RT-1217 U (T32*20*32) 32x20x32mm HYD-RT-1263 U (T32*25*32) 32x25x32mm HYD-RT-1225 U (T25*16*20) 25x16x20mm HYD-RT-1226 U (T32*20*25) 32x20x25mm HYD-RT-1246 U (T26*16*20) 26x16x20mm HYD-RT-1247 U (T32*20*25) 32x20x26mm HYD-RT-1218 U (T20*16*16) 20x16x16mm HYD-RT-1219 U (T20*20*16) 20x20x16mm HYD-RT-1220 U (T25*25*18) 25x25x18mm HYD-RT-1221 U (T25*25*20) 25x25x20mm HYD-RT-1222 U (T25*18*18) 25x18x18mm HYD-RT-1223 U (T25*20*20) 25x20x20mm HYD-RT-1224 U (T25*16*20) 25x16x20mm HYD-RT-1227 U (T32*20*25) 32x20x25mm HYD-RT-1261 U (T26*26*16) 26x26x16mm HYD-RT-1248 U (T26*26*18) 26x26x18mm HYD-RT-1249 U (T26*26*20) 26x26x20mm HYD-RT-1250 U (T26*18*18) 26x18x18mm HYD-RT-1251 U (T26*20*20) 26x20x20mm HYD-RT-1252 U (T26*20*16) 26x20x16mm HYD-RT-1253 U (T32*20*26) 32x20x26mm HYD-RT-1254 U (T32*32*16) 32x32x16mm HYD-RT-1264 U (T32*32*20) 32x32x20mm HYD-RT-1257 U (T32*32*26) 32x32x26mm HYD-RT-1262 U (T32*25*25) 32x25x25mm HYD-RT-1258 U (T32*26*26) 32x26x26mm HYD-RT-1245 U (T32*26*32) 32x26x32mm. Male tee: HYD-MT-2801 U (T16*1/2"M*16) 16mmx1/2"Mx16mm HYD-MT-2802 U (T16*3/4"M*16) 16mmx3/4"Mx16mm HYD-MT-2803 U (T20*1/2"M*20) 20mmx1/2"Mx20mm HYD-MT-2804 U (T20*3/4"M*20) 20mmx3/4"Mx20mm. Female tee: HYD-FT-1301 U (T16*1/2"F*16) 16mmx1/2"Fx16mm HYD-FT-1302 U (T16*3/4"F*16) 16mmx3/4"Fx16mm HYD-FT-1303 U (T18*1/2"F*18) 18mmx1/2"Fx18mm HYD-FT-1304 U (T18*3/4"F*18) 18mmx3/4"Fx18mm HYD-FT-1305 U (T20*1/2"F*20) 20mmx1/2"Fx20mm HYD-FT-1306 U (T20*3/4"F*20) 20mmx3/4"Fx20mm HYD-FT-1307 U (T20*1"F*20) 20mmx1"Fx20mm HYD-FT-1308 U (T25*1/2"F*25) 25mmx1/2"Fx25mm HYD-FT-1309 U (T25*3/4"F*25) 25mmx3/4"Fx25mm HYD-FT-1310 U (T25*1"F*25) 25mmx1"Fx25mm HYD-FT-1329 U (T26*1/2"F*26) 26mmx1/2"Fx26mm HYD-FT-1330 U (T26*3/4"F*26) 26mmx3/4"Fx26mm HYD-FT-1331 U (T26*1"F*26) 26mmx1"Fx26mm HYD-FT-1311 U (T32*1/2"F*32) 32mmx1/2"Fx32mm HYD-FT-1312 U (T32*3/4"F*32) 32mmx3/4"Fx32mm HYD-FT-1313 U (T32*1"F*32) 32mmx1"Fx32mm HYD-FT-1314 U (T32*11/4"F*32) 32mmx11/4"Fx32mm Cap: HYD-CP-2601 U (D1216) 16mm HYD-CP-2602 U (D1418) 18mm HYD-CP-2603 U (D1620) 20mm HYD-CP-2604 U (D2025) 25mm HYD-CP-2606 U (D2026) 26mm HYD-CP-2605 U (D2632) 32mm. Female union: YD-FU-2901 U (H16*1/2F) 16mmx1/2"F HYD-FU-2902 U (H16*3/4F) 16mmx3/4"F HYD-FU-2903 U (H20*1/2F) 20mmx1/2"F HYD-FU-2904 U (H20*3/4F) 20mmx3/4"F HYD-FU-2907 U (H25*1/2F) 25mmx1/2"F HYD-FU-2905 U (H25*3/4F) 25mmx3/4"F HYD-FU-2908 U (H25*1F) 25mmx1"F HYD-FU-2909 U (H26*1/2F) 26mmx1/2"F HYD-FU-2910 U (H26*3/4F) 26mmx3/4"F HYD-FU-2911 U (H26*1F) 26mmx1"F HYD-FU-2906 U (H32*1F) 32mmx1"F. Pipe: HYD-PXAX-1620 (PEXALPEX pipe) 16x2.0mm, HYD-PXAX-1820 (PEXALPEX pipe) 18x2.0mm, HYD-PXAX-2020 (PEXALPEX pipe) 20x2.0mm, HYD-PXAX-2525 (PEXALPEX pipe) 25x2.5mm, HYD-PXAX-2630 (PEXALPEX pipe) 26x3.0mm, HYD-PXAX-3230 (PEXALPEX pipe) 32x3.0mm.

Approval Holder:

Merchant Supplies Distribution Ltd

Company Name

Merchant Supplies Distribution Ltd

Address

Unit 2 Merlin Centre Acrewood Way St. Albans

Postcode

AL4 OJY

Phone

0203 915 2557

General Email

murat@gfsflex.com

View All Listings by this Company

Range of compression fittings with brass, chrome plated brass bodies. COM RANGE OF COM For use with copper pipe (EN 1057) Maximum operating pressure 16 bar. Maximum operating temperature 85°C

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250604024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

8MM – 54MM & ¼” – 2”

Marking:

Lawton & size on compression nut.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Bent Tap Connector Compression COMBTC0151/2 – 15mm x ½” Coupling Compression Chrome COMCP015CP – 15mm COMCP022CP – 22mm COMCP028CP – 28mm COMCP035CP – 35mm COMCP042CP – 42mm COMCP054CP – 54mm Coupling Compression COMCP008 – 08mm COMCP010 – 10mm COMCP015 – 15mm COMCP022 – 22mm COMCP028 – 28mm COMCP035 – 35mm COMCP042 – 42mm COMCP054 – 54mm Reducer Coupler COMCP01008 – 10mm x 08mm COMCP01508 – 15mm x 08mm COMCP01510 – 15mm x 10mm COMCP01512 – 15mm x 12mm COMCP02215 – 22mm x 15mm COMCP02815 – 28mm x 15mm COMCP02822 – 28mm x 22mm COMCP03522 – 35mm x 22mm COMCP03528 – 35mm x 28mm 90 Degree Elbow Compression COMEL008 – 08mm COMEL010 – 10mm COMEL015 – 15mm COMEL022 – 22mm COMEL028 – 28mm COMEL035 – 35mm COMEL042 – 42mm COMEL054 – 54mm 45 Degree Elbow Compression COMEL01545 – 15mm COMEL02245 – 22mm COMEL02845 – 28mm 90 Degree Elbow Compression Chrome COMEL015CP – 15mm COMEL022CP – 22mm COMEL028CP – 28mm COMEL035CP – 35mm COMEL042CP – 42mm COMEL054CP – 54mm Equal Tee Compression COMTE008 – 08mm COMTE010 – 10mm COMTE015 – 15mm COMTE022 – 22mm COMTE028 – 28mm COMTE035 – 35mm COMTE042 – 42mm COMTE054 – 54mm Equal Tee Compression Chrome COMTE015CP – 15mm COMTE022CP – 22mm COMTE028CP – 28mm COMTE035CP – 35mm COMTE042CP – 42mm COMTE054CP – 54mm Cross Tee Compression COMCR015 – 15mm COMCR022 – 22mm COMCR028 – 28mm Male Iron Coupling Compression COMCPMI0081/4 – 08mm x ¼” COMCPMI0101/4 – 10mm x ¼” COMCPMI0103/8 – 10mm x 3/8” COMCPMI0151/4 – 15mm x ¼” COMCPMI0153/8 – 15mm x 3/8” COMCPMI0151/2 – 15mm x ½” COMCPMI0153/4 – 15mm x ¾” COMCPMI0221/2 – 22mm x ½” COMCPMI0223/4 – 22mm x ¾” COMCPMI0221 – 22mm x 1 “ COMCPMI0283/4 – 28mm x ¾” COMCPMI0281 – 28mm x 1” COMCPMI03511/4 – 35mm x 1 ¼” COMCPMI04211/2 – 42mm x 1 ½” COMCPMI0542 – 54mm x 2” Male Iron Coupling Chrome Compression COMCPMI0151/2CP – 15mm x ½” COMCPMI0223/4CP – 22mm x ¾” Female Iron Coupling Compression COMCPFI0101/4 – 10mm x ¼” COMCPFI0151/4 – 15mm x ¼” COMCPFI051/2 – 15mm x ½” COMCPFI0153/4 – 15mm x ¾” COMCPFI0221/2 – 22mm x ½” COMCPFI0223/4 – 22mm x ¾” COMCPFI0221 – 22mm x 1 “ COMCPFI0281 – 28mm x 1” COMCPFI03511/4 – 35mm x 1 ¼” COMCPFI04211/2 – 42mm x 1 ½” COMCPFI0542 – 54mm x 2” Female Iron Coupling Chrome Compression COMCPFI0151/2CP – 15mm x ½” COMCPFI0223/4CP – 22mm x ¾” Female Iron Elbow Chrome Compression COMELFI0151/2CP – 15mm x ½” COMELFI0223/4CP – 22mm ¾” COMELFI0221CP – 22mm x 1” Male Iron Elbow Compression COMELMI0151/2 – 15mm x ½” COMELMI0153/4 – 15mm x ¾” COMELMI0223/4 – 22mm x ¾” COMELMI0281 – 28mm x 1” COMELMI03511/4 – 35mm x 1 ¼” Female Iron Elbow Compression COMELFI0151/2 – 15mm x ½” COMELFI0153/4 – 15mm x ¾” COMELFI0221/2 – 22mm x ½” COMELFI0223/4 – 22mm x ¾” COMELFI0221 – 22mm 1 “ COMELFI0281 – 28mm x 1” COMELFI03511/4 – 35mm x 1 ¼” COMELFI04211/2 – 42mm x 1 ½” COMELFI0542 – 54mm x 2” Male Iron Elbow Chrome Compression COMELMI0151/2CP – 15mm x ½” COMELMI0223/4CP – 22mm x ¾” Wallplate Elbow Compression COMELWL0151/2 – 15mm x ½” COMELWL0223/4 – 22mm x ¾” Wallplate Elbow Chrome Compression COMELWL0151/2CP – 15mm x ½” Male Iron Coupler Taper Thread COMTTCPMI0151/2 – 15mm x ½” COMTTCPMI0223/4 – 22mm x ¾” COMTTCPMI0281 – 28mm x 1” Male Coupler Ext Taper Thread COMETTCPMI0223/4 – 22mm x ¾” Crossover Compression COMC022 – 22mm End Cap Compression COMEC008 – 08mm COMEC010 – 10mm COMEC015 – 15mm COMEC022 – 22mm COMEC028 – 28mm COMEC035 – 35mm COMEC042 – 42mm COMEC054 – 54mm End Cap Compression Chrome Plated COMEC015CP – 15mm COMEC022CP – 22mm COMEC028CP – 28mm COMEC035CP – 35mm COMEC042CP – 42mm COMEC054CP – 54mm Red Tee Compression COMTE0151522 – 15mm x 15mm x 22mm COMTE0221515 – 22mm x 15mm x 15mm COMTE0221522 – 22mm x 15mm x 22mm COMTE0222215 – 22mm x 22mm x 15mm COMTE0281528 – 28mm x 15mm x 28mm COMTE0282228 – 28mm x 22mm x 28mm COMTE0282815 – 28mm x 28mm x 15mm COMTE0282822 – 28mm x 28mm x 22mm Female Tee Compression COMTEFI015151/2 – 15mm x 15mm x ½” COMTEFI022221/2 – 22mm x 22mm x ½” COMTEFI022223/4 – 22mm x 22mm x ¾” COMTEFI028281 – 28mm x 28mm x 1” Red Tee Chrome Compression COMTE0151522CP – 15mm x 15mm x 22mm COMTE0221515CP – 22mm x 15mm x 15mm COMTE0222215CP – 22mm x 22mm x 15mm COMTE0222228CP – 22mm x 22mm x 28mm Reducing Sets Compression COMRS0108 – 10mm x 08mm COMRS0158 – 15mm x 08mm COMRS01510 – 15mm x 10mm COMRS02215 – 22mm x 15mm COMRS02822 – 28mm x 22mm COMRS03515 – 35mm x 15mm COMRS03522 – 35mm x 22mm COMRS03528 – 35mm x 28mm COMRS04215 – 42mm x 15mm COMRS04222 – 42mm x 22mm COMRS04228 – 42mm x 28mm COMRS04235 – 42mm x 35mm COMRS05422 – 54mm x 22mm COMRS05428 – 54mm x 28mm COMRS05435 – 54mm x 35mm COMRS05442 – 54mm x 42mm Tank Connector Compression COMTC015 – 15mm COMTC022 – 22mm COMTC028 – 28mm COMTC035 – 35mm COMTC042 – 42mm COMTC054 – 54mm Repair Coupling Compression COMRCP015 – 15mm COMRCP022 – 22mm Straight Tap Connect Compression COMSTC0151/2 – 15mm x ½” COMSTC0153/4 – 15mm x ¾” Red Elbow Compression COMREL02215 – 22mm x 15mm

Approval Holder:

Lawton Tube Company Limited.

Company Name

Lawton Tube Company Limited.

Address

Torrington Avenue Tile Hill Coventry

Postcode

CV4 9AB

View All Listings by this Company

Range of brass press fittings for use with copper pipe (manufactured to EN1057:2006 and +A1:2010 Seamless round copper tube, R250 half hard). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250804708

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Flowflex logo and size on body.

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

Male Adaptor: 572210 - 15X1/2B 572211 - 22X3/4B 572212 - 28X1B 572213 - 35X1.1/4B 572214 - 42X1.1/2B 572215 - 54X2B Female Adaptor: 572216 - 15X1/2B 572217 - 22X3/4B 572218 - 28X1B 572219 - 35X1.1/4B 572220 - 42X1.1/2B 572221 - 54X2B Wallplate Elbow: 572222 - 15x½B.

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Manufacturer:

Flowflex Components Ltd.

Company Name

Flowflex Components Ltd.

Address

Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton

Postcode

SK17 7LR

Country

United Kingdom

Phone

+44 1298 77211 Fax: 01298 72362 Telex: 666482

General Email

daniel.jones@fowflex.com

View All Listings by this Company

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204110

Size:

see model

Marking:

Plumb Bliss logo (PB), Size & month/year of manufacture on fitting body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

10.1272 Plumb Bliss Compression Coupler Male 15mm x 1/2" 10.1273 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1274 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1275 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1276 Plumb Bliss Compression Coupler Female 15mm x 1/2" 10.1277 Plumb Bliss Compression Coupler Male 15mm x 3/4" 10.1278 Plumb Bliss Compression Coupler Male 22mm x 1/2" 10.1279 Plumb Bliss Compression Coupler Male 22mm x 3/4" 10.1280 Plumb Bliss Brass Compression Tee 15mm x 15mm x 1/2" 10.1281 Plumb Bliss Wall Plate Compression Elbow 15mm x 1/2"

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of WC dual flush drop valves with an ABS body and silicon seal. The valves are operated via a push button assembly for either full or reduced flush and incorporate an internal adjustable height overflow. Cold water use only. Open outlet use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

250804704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ½” and 2” BSP (M) outlet.

Marking:

Macdee Wirquin and model on body.

Installation Requirements:

R001 R556 R571

Expiry date:

31/08/2030

Model:

Afv50200 Afv50100 Afv50400 Dva0100

Approval Holder:

Wirquin Ltd

Company Name

Wirquin Ltd

Address

Unit 3 Alpha Court Thorne Doncaster

Postcode

DN8 5TZ

Country

United Kingdom

Phone

01302 312252

General Email

mick.kirby@wirquin.co.uk

View All Listings by this Company

Range of WC dual flush drop valves with ABS bodies and silicone seals. The valves are operated via a two push button assembly for either full or reduced flush and incorporate an internal overflow. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2311107

Size:

2” BSP (M)

Marking:

Plumb Bliss, logo & company website on bottom. WRAS & technical data on side.

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/11/2028

Model:

10.1260

Approval Holder:

Bliss UK Group Ltd

Company Name

Bliss UK Group Ltd

Address

Unit 4A Kinsbourne Farm Wick End Stagsden Bedfordshire

Postcode

MK43 8TS

Country

United Kingdom

Phone

01234 860230

General Email

accounts@blissukgroup.co.uk

View All Listings by this Company

Range of urinal autosyphons with plastic body and supplied with plastic backnuts.

Section:

1307 Flushing Mechanisms

Section Subtitle:

Urinals.

WRAS Approval Number:

250801701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

B.B.S Auto Syphon, BS 1876 tested & Masefield Beta Ltd. on outer body

Installation Requirements:

R001

Expiry date:

31/08/2030

Model:

BBS Auto Syphon range consisting of; Size 1 - 4.5 litre (1 Gallon): 5½’’ X 1” BSP outlet. 5½’’ X 1¼” BSP outlet. Size 2 - 9 litre (2 Gallon): 6¼’’ X 1” BSP outlet. 6¼’’ X 1¼” BSP outlet. Size 3 - 13.5 litre (3 Gallon): 7½’’ X 1” BSP outlet. 7½’’ X 1¼” BSP outlet. Size 4 - 18 litre (4 Gallon): 8¼’’ X 1” BSP outlet. 8¼’’ X 1¼” BSP outlet. Size 5 - 22.5 litre (5 gallon): 9¼’’ X 1” BSP outlet. 9¼’’ X 1¼” BSP outlet.

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Range of under counter electric instantaneous water heaters with stainless steel tank and heating element. Open outlet use only. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

250604712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

DAOMENG logo printed on front panel. DAOMENG logo; Pressure, Capacity, Model No and product info on data label.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

DM001, 241450, S2, S5.

Approval Holder:

GUANGDONG DM INTELLIGENT TECHNOLOGY CO.LTD

Company Name

GUANGDONG DM INTELLIGENT TECHNOLOGY CO.LTD

Address

17, B Building He Sui Industrial Avenue Dongheping Village Dongfeng Town Zhongshan City. Guangdong Province.

Country

China

Phone

18676009191

General Email

18666151668@163.com

View All Listings by this Company

Qmpress Instaboil Range of under counter electric instantaneous water heaters with stainless steel tank and heating element. Open outlet use only. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

250604718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

QMPRESS logo printed on front panel. logo; Pressure, Capacity, Model No, WRAS and product info on data label.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Qmpress Instaboil 4in1 Boiler Water Heater Tanks.

Approval Holder:

QMPRESS LTD

Company Name

QMPRESS LTD

Address

Qmpress Ltd Cools, Headford, Killarney

Country

Ireland

View All Listings by this Company

Range of SSM-AQUO ultrasonic water meters with brass bodies, the inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4” BSP (M) 7/8” BSP (M) 1” BSP (M) 1-1/4” BSP (M) 1-1/2” BSP (M) 2” BSP (M)

Marking:

Pietro Fiorentini logo moulded on cap. Pietro Fiorentini logo, pressure, flow, year of manufacture (YYYY) and other technical information printed on meter face. Flow arrow and DN moulded on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

SSM-AQUO DN15 - DN40

Approval Holder:

Pietro Fiorentini S.p.A.

Company Name

Pietro Fiorentini S.p.A.

Address

Via E. Fermi, n. 8/10-36057 Arcugnano (VI).

Country

Italy

General Email

mario.petti@fiorentini.com

View All Listings by this Company

Range of pilot operated base valves, main body only, with epoxy coated ductile iron bodies and stainless-steel plugs. Maximum working pressure IDROMEMBRANA 16.0 & HYDROMODUL 25.0 Bar Maximum operating temperature IDROMEMBRANA 50.0°C and HYDROMODUL 80.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250 & DN300 Flanged

Marking:

Technidro, DN, PN and model name on adhesive label on body. Flow arrow on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

IDROMEMBRANA HYDROMODUL

Manufacturer:

Techidro S.R.L

Company Name

Techidro S.R.L

Address

VIA G GASTALDI 26F 16165 GENOVA ITALY

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002724

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

CWMA3 & CWMA5 : 1” BSP (F) inlet x 1” BSP (F) outlet. CWMA7 : 1¼” BSP (F) inlet x 1” BSP (F) outlet. CWMA9 : 1½” BSP (F) inlet x 1¼” BSP (F) outlet. CWMA18 : 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Winflo logo, model code and product technical information on data-plate.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

CMWA range model code: CMWAXX-Y(T) CMWA = Pump type. XX = Nominal flow rate m/3 per hour (3, 5, 7, 9 or 18). Y = Number of impellers. T = 3 phase or (blank) = single phase. CMWA3-2, CMWA3-3, CMWA3-4, CMWA3-5, CMWA3-6 & CMWA3-7. CMWA5-2, CMWA5-3, CMWA5-4, CMWA5-5, CMWA5-6 & CMWA5-7. CMWA7-2, CMWA7-3, CMWA7-4, CMWA7-5 & CMWA7-6. CMWA9-2, CMWA9-3, CMWA9-4 & CMWA9-5. CMWA3-2T, CMWA3-3T, CMWA3-4T, CMWA3-5T, CMWA3-6T & CMWA3-7T. CMWA5-2T, CMWA5-3T, CMWA5-4T, CMWA5-5T, CMWA5-6T & CMWA5-7T. CMWA7-2T, CMWA7-3T, CMWA7-4T, CMWA7-5T, CMWA7-6T & CMWA7-7T. CMWA9-2T, CMWA9-3T, CMWA9-4T & CMWA9-5T. CMWA18-2T, CMWA18-3T & CMWA18-4T.

Approval Holder:

Eautechnik GmbH

Company Name

Eautechnik GmbH

Country

Germany

View All Listings by this Company

Range of shower booster pumps (either single or double) with acetal bodies and impellers and EPDM seals and NBR `O` rings. Supplied with stainless-steel braided EPDM lined flexible hoses incorporating isolation valves Maximum operating pressure 3.8 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250304731

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm pushfit

Marking:

Bristan and product info on label

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Maximum working pressure 3.8 bar: ST PUMP15TN / 232650 ST PUMP20TN / 232653 ST PUMP20SG / 232651

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250612005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Keekoe on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

H01011, H01023, H02013, H03013, H03021, H04011, H04023, H05014, H05015, H06013, H09015, H11013, H12013, H17015, H20013, H21011, H27015, H28013, H29033, H30043, H31015, H33013, H34013, H34021, H35013, H36011, H34021, H34021, H43014, H46014, H39033, H37013, H39031, H39013, H39043, H49014, H48013, H48021, H46023, H55013, H56013, H41013 & H42013.

Approval Holder:

Xiamen Keekoe Sanitary Ware Co. Ltd.

Company Name

Xiamen Keekoe Sanitary Ware Co. Ltd.

Address

No.275-279 Huanzhu Road North Jimei Industrial Zone Xiamen

Country

China

View All Listings by this Company

Range of overhead shower outlets with stainless steel bodies (various finishes). The inlet incorporates a stainless-steel filter and a plastic flow regulator. Maximum working temperature 45°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250608015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Dolphin Solutions Ltd logo on the body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

DB3001.a.bbb Dolphin blue round shower head DB3002.a.bbb Dolphin blue square shower head Where: The suffix .a in the above codes will be a number 1 - 9 to denote the finish: .1 to denote brushed/satin polished. .2 to denote mirror polished. .3 to denote brushed/satin polished with PVD coating. .4 to denote mirror polished with PVD coating. .5 to denote powder coated. .6 - 9 to denote other material and finish options. The suffix .bbb in the above code indicates the colour of the PVD or powder coat. It can be either two or three digits from 01-999.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

General Email

Ralph.Mumford@dolphinsolutions.com

View All Listings by this Company

Shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250612009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

PPI on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

H11013 & H12013.

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Shower handset with a plastic body and Chrome finish Maximum operating temperature 60 °C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250612010

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Deva on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

HANM13

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of ‘Y’-pattern strainers with blue epoxy coated ductile iron bodies and a stainless-steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Size:

DN50 - DN 300 flanged

Marking:

AEON logo DN, PN, year of manufacture and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/04/2029

Model:

AW32 - Aeon Y-Strainers DN50 – DN300 Flanged

Approval Holder:

Radius Systems Limited

Company Name

Radius Systems Limited

Address

Radius House, Berristow Lane, South Normanton, Alfreton, Derbyshire

Postcode

DE55 2JJ

Country

United Kingdom

Phone

01773582303

General Email

richard.marks@radius-systems.com

View All Listings by this Company

Range of in-line bronze bodied ‘Y’-pattern strainers with stainless steel mesh. Maximum working pressure 25.0 bar, Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

HC-06181-15 ½” BSP (F)x(F) (DN15), HC-06181-20 ¾” BSP (F)x(F) (DN20), HC-06181-25 1” BSP (F)x(F) (DN25), HC-06181-32 1¼” BSP (F)x(F) (DN32), HC-06181-40 1½” BSP (F)x(F) (DN40), HC-06181-50 2” BSP (F)x(F) (DN50).

Marking:

Home Creator Group Ltd. logo flow arrow & size on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

HC-06181-15 HC-06181-20 HC-06181-25 HC-06181-32 HC-06181-40 HC-06181-50

Approval Holder:

Home Creator Group Ltd

Company Name

Home Creator Group Ltd

Address

167 - 169 Great Portland Street London

Postcode

W1W 5PF

View All Listings by this Company