`Prox’ and ‘Wave` ranges of sensor operated flow control devices incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm Spigot inlet x 1/2" BSP (M) outlet

Marking:

Y Stern logo on sensor unit

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Prox Sensor Range: 620200 620000 620700 Wave Sensor Range: 620420 620500 620810

Product Images

Approval Holder:

Y. Stern Engineering (1989) Ltd

Company Name

Y. Stern Engineering (1989) Ltd

Address

15 Gan Rave Blvd. Yavne

Postcode

8122217

Country

Israel

Phone

+972 8 9326007

General Email

leah@sternfaucets.com

View All Listings by this Company

‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only. ‘Hydro MPC’ range of booster sets incorporating vertical multistage centrifugal pumps, butterfly valves, non-return valves (not suitable for backflow protection), pressure transmitters, pressure gauges, lever operated spherical valves, stainless steel blanking flanges and fibre/NBR gaskets. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240707001

Note:

Approval doesn’t include pressure vessels.

Size:

Small Booster Sets Systems with 2 to 3 Pumps = 2” BSP (M), Systems with 4 to 6 pumps = 2½” BSP (M). Medium Booster Sets Systems with CRI(E)10 pumps: Systems with 2 to 3 pumps = 2½” BSP (M), Systems with 4 to 5 pumps = DN80 flanges, Systems with 6 pumps = DN100 flanges. Systems with CRI(E)15 and CRI(E)20 pumps: Systems with 2 pumps = DN80 flanges, Systems with 3 to 4 pumps = DN100 flanges, Systems with 5 to 6 pumps = DN150 flanges. Sizes added November 2024: Large Booster Sets Systems with CR(E)32 pumps: Systems with 2 pumps = DN100 flanges, Systems with 3 to 6 pumps = DN150 flanges. Systems with CR(E)45 and CR(E)64 pumps: Systems with 2 pumps = DN150 flanges, Systems with 3 to 6 pumps = DN200 flanges.

Marking:

Grundfos logo, model, serial number, P/N, manufacturing country and technical information on adhesive label on base frame.

Installation Requirements:

R001 R008 R415

Expiry date:

31/07/2029

Model:

Small Booster Sets (PN16): HYDRO MPC-E “X” CRIE3, HYDRO MPC-E “X” CRIE5, HYDRO MPC-F “X” CRI3, HYDRO MPC-F “X” CRI5, HYDRO MPC-S “X” CRI3, HYDRO MPC-S “X” CRI5. Medium Booster Sets (PN16): HYDRO MPC-E “X” CRIE10, HYDRO MPC-E “X” CRIE15, HYDRO MPC-E “X” CRIE20, HYDRO MPC-F “X” CRI10, HYDRO MPC-F “X” CRI15, HYDRO MPC-F “X” CRI20, HYDRO MPC-S “X” CRI10, HYDRO MPC-S “X” CRI15, HYDRO MPC-S “X” CRI20. Models added November 2024: Large Booster Sets (PN16): HYDRO MPC-E “X” CRE32, HYDRO MPC-E “X” CRE45, HYDRO MPC-E “X” CRE64, HYDRO MPC-F “X” CR32, HYDRO MPC-F “X” CR45, HYDRO MPC-F “X” CR64, HYDRO MPC-S “X” CR32, HYDRO MPC-S “X” CR45, HYDRO MPC-S “X” CR64. The “X” preceding CR indicates the number of pumps in the booster set, between 2 and 6 pumps. The number following the pump type designation (e.g.: 32, 45 and 64) indicates the flow rate of the pump in m³/h. Full code example: Hydro MPC-E 2 CRE32-2-U2D-A-A-GHJ Where: Hydro MPC = Product name. -E = System type; All pumps with E-motor or CUE, and can also be -F for Fixed-speed pumps, 1 CUE or -S for Fixed-speed pumps. 2 = Number of pumps, this can be any number between 2 and 6. CRE = Pump type, can also be pumps beginning CR, CRI or CRIE. 3, 5, 10, 15, 20, 32, 45, 64 = flow rate of the pump in m³/h. U2 = Voltage, can also be U1, U3, U4, U5, U6, U7, U8, U9, UA, UB, UC, UD or UX. D = Design, can also be A, B, C, E, F, G, H, I or W. -A = Starting method; E (speed control). -A = Material combination; Stainless steel manifold, base frame and standard valves. -HJ = Options;, H - Dry-running protection, J - Redundant sensor.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of positive displacement diaphragm pumps with plastic bodies, EPDM ‘O’-rings and TPE diaphragm. The product incorporates an integral bypass relief valve. For use with John Guest LLDPE Pipe. Maximum working pressure 12.0 Bar. Maximum operating temperature 40.0°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

240702045

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

5/16" Push fit, 3/8" Push fit.

Marking:

Aquatec name and logo, model number, serial number and date of manufacture (DD/MM/YY) on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

535X-2XXW-XXXX, 537X-2XXW-XXXX. Model Code Denotes: 1st & 2nd designators = 53 - Series Demand Delivery Pumps. 3rd designator is port size for pumphead housing, where ‘5’ = 3/8” or ‘7’ = 5/16” . 4th designator is cam angle for flow performance variation only. X can be 0 to 9. 5th designator ‘2’ indicates that pump has bypass relief control. 6th designator is for pressure setting of relief valve. X can be A to Z depending on pressure setting. 7th designator ‘X’ is a code for the specific materials in this model, e.g. Nylon pumphead housing. 8th designator ‘W’ = WRAS Compliant 9th - 12th designators XXXX can be any alphanumeric characters to denote electrical motor and motor mounting base plate combination.

Product Images

Approval Holder:

Aquatec International Inc

Company Name

Aquatec International Inc

Address

17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company

Manufacturer:

Aquatec International Inc

Company Name

Aquatec International Inc

Address

17422 Pullman Street, Irvine, CA 92614, U.S.A.

View All Listings by this Company

Overhead ceiling or wall mounted (depending on shower arm) shower outlet with chrome plated plastic body, EPDM o-rings and a plastic flow restrictor at the ball joint. Maximum working pressure: Open outlet. Maximum operating temperature: 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

23113748

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) – inlet to shower arm. ½” BSP (M) – inlet to showerhead.

Marking:

Grohe logo on shower outlet.

Installation Requirements:

R001 R010

Expiry date:

30/11/2028

Model:

26.054 Rainshower Allure 230. The showerhead can be installed together with either of the following shower arms: 27.709 Rainshower Grohe shower arm (wall), 27.711 Rainshower Grohe shower arm (ceiling).

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of overhead shower outlets, (brass bodies - various finishes. The inlets incorporate combined EPDM washers and stainless-steel strainers. Open outlet use only Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240902003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Model 27 607 xx0 is supplied with a shower arm Model 27 620 xx0 is supplied with a ceiling connector

Size:

1/2" BSP (M)

Marking:

Hansgrohe on body

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

27 607 xx0 27 620 xx0 27 623 xx0 Models added February 2025: 27 624 xx0 & 28 821 xx0. Models added September 2025: 33 291 7xx & 32 291 7xx. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of shower handsets with brass bodies (various finishes). The inlets incorporate a plastic flow regulator and an approved single check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240902035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

SHS on handset

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

V654W-XX V654WB-XX V254W-YY-XX V255W-YY-XX V256W-YY-XX Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Product Images

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

EASO range of shower head and hand showers, with ABS bodies and chromium plated finish. Open outlet use. Maximum operating temperature - 65 °C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240902064

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M). 1/2" BSP (F) - (models 11102315 and 11102275 only).

Marking:

EASO and WRAS on Face of shower head – models 11102315 and 11102275 only. EASO and WRAS on base of hand shower – All Other.

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

11102315 – Overhead shower, 11102275 – Overhead shower, 11101050 – Hand shower, 1110104901 – Hand shower, 1110104902 – Hand shower, 11101208 – Hand shower, 11101253 – Hand shower, 11101301 – Hand shower, 11101191 – Hand shower, 1110110501 – Hand shower, 1110110502 – Hand shower, 11101346 – Hand shower, 11101276 – Hand shower, 11101328 – Hand shower, 11101192 – Hand shower, 11101355 – Hand shower, 11101324 – Hand shower, 11101368 – Hand shower.

Product Images

Approval Holder:

Xiamen EASO Co., Ltd.

Company Name

Xiamen EASO Co., Ltd.

Address

4-5th Floor, No. 1020, Guankou Middle Road, Jimei District, Xiamen City, Fujian Province, 361023

Country

China

View All Listings by this Company

Shower handset with plastic body. Maximum operating temperature 85C Open outlet use only

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2301103

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

704314 65MM SINGLE MODE HANDSET AL064 - SQUARE

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Manufacturer:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of in-line `Y` patterned strainers with brass bodies and stainless steel filters. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

1715 Strainers

Size:

BSP (F) - 1/2", 3/4", 1", 1-1/4", 1-1/2", 2", 2-1/2", 3", 4".

Marking:

Double-Lin logo, PN & flow arrow moulded on body.

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

BYTS015 BYTSW020 BYTSW025 BYTSW032 BYTSW040 BYTSW050

Approval Holder:

Plumbing & Heating Distribution Ltd. (PHD Ltd.)

Company Name

Plumbing & Heating Distribution Ltd. (PHD Ltd.)

Address

Piksa House, 2 Penrod Way, Heysham, Lancashire

Postcode

LA3 2UZ

View All Listings by this Company

Manufacturer:

Zhejiang Double-Lin Valves Co. Ltd.

Company Name

Zhejiang Double-Lin Valves Co. Ltd.

Address

Yanpan Hardware Industrial Area, Ganjiang Town, Yuhuan

Country

China

Phone

+86-576-89915157

View All Listings by this Company

Self-closing, wall mounted bib tap (chromium plated brass) with spring loaded headwork and dome type operating members. The spout outlet incorporates a plastic aerator with integral flow regulator or optional flow straightener. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1820 Taps

Section Subtitle:

Self closing tap(s).

WRAS Approval Number:

240902016

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP M

Marking:

Armitage Shanks on operating member

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

S7241AA Avon 21

Product Images

Approval Holder:

Armitage Shanks

Company Name

Armitage Shanks

Address

Old Road (Lodge 1), Armitage, Rugeley

Postcode

WS15 4BT

Country

Staffordshire,

Phone

+44 800 866 966 Fax: 01543 491677 Telex: 339781

View All Listings by this Company