Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:

1050 Filters and Housings

WRAS Approval Number:

2305081

Note:

IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).

Size:

Refer to models

Marking:

Deva, WRAS, pressure & temp on adhesive label on body.

Installation Requirements:

R001 R008 R150 R170 R290

Expiry date:

31/05/2028

Model:

Carbon Block/Scale Inhibitor models: FILTER 001 10” 1 micron: ¼” push fit

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Stainless steel press fittings for use with 316L & 304 stainless steel tube incorporating EPDM ‘O’ rings. The fittings and tube are assembled using a crimping tool. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2307003

Size:

See models below, note, all sizes in inches are BSP (M) or BSP (F) depending on coupling type (listed in models) and all sizes in mm are crimped.

Marking:

Guanzhou Mayer Corp logo, material, size and pressure on body of fittings.

Installation Requirements:

R001

Expiry date:

31/07/2028

Model:

Stainless steel pipe, 6m rods: E0115 15x1.0mm E0118 18x1.0mm E0122 22x1.2mm E0128 28x1.2mm E0135 35x1.5mm E0142 42x1.5mm E0154 54x1.5mm E0176 76.1x2.0mm E0189 88.9x2.0mm E01108 108x2.0mm Stainless steel pipe, 3m rods: E0215 15x1.0mm E0218 18x1.0mm E0222 22x1.2mm E0228 28x1.2mm E0235 35x1.5mm E0242 42x1.5mm E0254 54x1.5mm E0276 76.1x2.0mm E0289 88.9x2.0mm E02108 108x2.0mm Coupling: E1015 15mm E1018 18mm E1022 22mm E1028 28mm E1035 35mm E1042 42mm E1054 54mm E1076 76.1mm E1089 88.9mm E10108 108mm Reducing Coupling: E111815 18x15mm E112215 22x15mm E112218 22x18mm E112815 28x15mm E112818 28x18mm E112822 28x22mm E113522 35x22mm E113528 35x28mm E114228 42x28mm E114235 42x35mm E115428 54x28mm E115435 54x35mm E115442 54x42mm E117642 76.1 x42mm E117654 76.1 x54mm E118954 88.9 x54mm E118976 88.9 x76.1mm E1110854 108 x54mm E1110876 108 x76.1mm E1110889 108 x88.9mm Reducer with plain end: E121815 18x15mm E122215 22x15mm E122218 22x18mm E122815 28x15mm E122818 28x18mm E122822 28x22mm E123515 35x15mm E123518 35x18mm E123522 35x22mm E123528 35x28mm E124222 42x22mm E124228 42x28mm E124235 42x35mm E125422 54x22mm E125428 54x28mm E125435 54x35mm E125442 54x42mm E127654 76.1x54mm E128954 88.9x54mm E128976 88.9x76.1mm E1210854 108x54mm E1210876 108x76.1mm E1210889 108x88.9mm Coupling: E1315 15mm E1318 18mm E1322 22mm E1328 28mm E1335 35mm E1342 42mm E1354 54mm Female coupling E141512 15mmx1/2” E141534 15mmx3/4” E141812 18mmx1/2” E141834 18mmx3/4” E142212 22mmx1/2” E142234 22mmx3/4” E14221 22mmx1” E142834 28mmx3/4” E14281 28mmx1” E1435114 35mmx11/4” E1442112 42mmx11/2” E14542 54mmx2” Male coupling E161512 15mmx1/2” E161534 15mmx3/4” E161812 18mmx1/2” E161834 18mmx3/4” E162212 22mmx1/2” E162234 22mmx3/4” E16221 22mmx1” E162834 28mmx3/4” E16281 28mmx1” E1635114 35mmx11/4” E1642112 42mmx11/2” E16542 54mmx2” E1676212 76.1mmx2 1/2” E16893 88.9mmx3” E161084 108mmx4” Union E1C15 15mm E1C18 18mm E1C22 22mm E1C28 28mm E1C35 35mm E1C42 42mm E1C54 54mm Union with Male thread E1815012 15mm E1818012 18mm E1822034 22mm E1828100 28mm E1835114 35mm E1842112 42mm E1854200 54mm 90° Bend E2015 15mm E2018 18mm E2022 22mm E2028 28mm E2035 35mm E2042 42mm E2054 54mm E2076 76.1mm E2089 88.9mm E20108 108mm 90°Bend with plain end E2215 15mm E2218 15mm E2222 22mm E2228 28mm E2235 35mm E2242 42mm E2254 54mm E2276 76.1mm E2289 88.9mm E22108 108mm Female 90°Bend E231512 15mmx1/2” E231812 18mmx1/2” E231834 18mmx3/4” E232234 22mmx3/4” E23281 28mmx1” E2335114 35mmx 11/4” E2342112 42mmx 11/2” E23542 54mmx2” Male 90°Bend E251512 15mmx1/2” E251812 18mmx1/2” E251834 18mmx3/4” E252234 22mmx3/4” E25281 28mmx1” E2535114 35mmx11/4” E2542112 42mmx11/2” E25542 54mmx2” 90°Short Elbow E271512 15mmx1/2” E271812 18mmx1/2” E272212 22mmx1/2” E272234 22mmx3/4” E27281 28mmx1” 90°Elbow with wall plate E2D1512 15mmx1/2” E2D2234 22mmx3/4” E2D281 28mmx1” Equal Tee E3015 15mm E3018 18mm E3022 22mm E3028 28mm E3035 35mm E3042 42mm E3054 54mm E3076 76.1mm E3089 88.9mm E30108 108mm Reducing Tee E31181518 18x15mm E31221522 22x15mm E31221822 22x18mm E31281528 28x15mm E31281828 28x18mm E31282228 28x22mm E31351535 35x15mm E31351835 35x18mm E31352235 35x22mm E31352835 35x28mm E31421542 42x15mm E31421842 42x18mm E31422242 42x22mm E31422842 42x28mm E31423542 42x35mm E31541554 54x15mm E31541854 54x18mm E31542254 54x22mm E31542854 54x28mm E31543554 54x35mm E31544254 54x42mm E31764276 76.1x42mm E31765476 76.1x54mm E31895489 88.9x54mm E31897689 88.9x76.1mm E3110854108 108x54mm E3110876108 108x76.1mm E3110889108 108x88.9mm Female Tee E32151215 15mmx1/2” E32181218 18mmx1/2” E32183418 18mmx3/4” E32221222 22mmx1/2” E32223422 22mmx3/4” E32281228 28mmx1/2” E32283428 28mmx3/4” E3228128 28mmx1” E32351235 35mmx1/2” E32353435 35mmx3/4” E323511435 35mmx11/4” E32421242 42mmx1/2” E32423442 42mmx3/4” E324211242 42mmx11/2” E32541254 54mmx1/2” E3254254 54mmx2” E32763476 76.1mmx3/4” E3276276 76.1mmx2” E32893489 88.9mmx3/4” E3289289 88.9mmx2” E3210834108 108mmx3/4” E321082108 108mmx2” Male Tee E33151215 15mmx1/2” E33181218 18mmx1/2” E33221222 22mmx1/2” E33223422 22mmx3/4” E33281228 28mmx1/2” E33283428 28mmx3/4” E3328128 28mmx1” E33351235 35mmx1/2” E33353435 35mmx3/4” E333511435 35mmx11/4” E33421242 42mmx1/2” E33423442 42mmx3/4” E334211242 42mmx11/2” E33541254 54mmx1/2” E33543454 54mmx3/4” E3354254 54mmx2” E33763476 76.1mmx3/4” E3376276 76.1mmx2” E33893489 88.9mmx3/4” E3389289 88.9mmx2” E3310834108 108mmx3/4” E331082108 108mmx2” 45°Bend E4015 15mm E4018 18mm E4022 22mm E4028 28mm E4035 35mm E4042 42mm E4054 54mm E4076 76.1mm E4089 88.9mm E40108 108mm 45°Bend with plain end E4115 15mm E4118 18mm E4122 22mm E4128 28mm E4135 35mm E4142 42mm E4154 54mm E4176 76.1mm E4189 88.9mm E41108 108mm Cap E5015 15mm E5018 18mm E5022 22mm E5028 28mm E5035 35mm E5042 42mm E5054 54mm Crossover E5115 15mm E5118 18mm E5122 22mm E5128 28mm Flange E1828100 54mm E5376 76.1mm E5389 88.9mm E53108 108mm

Approval Holder:

Guangzhou Mayer Corp., Ltd

Company Name

Guangzhou Mayer Corp., Ltd

Address

No.38, Yonghe Avenue, Yonghe Economic Management Area, Guangzhou Economic &Technological Development Zone, Guangdong province

Country

China

View All Listings by this Company

Manufacturer:

Guangzhou Mayer Corp., Ltd

Company Name

Guangzhou Mayer Corp., Ltd

Address

No.38, Yonghe Avenue, Yonghe Economic Management Area, Guangzhou Economic &Technological Development Zone, Guangdong province

Country

China

View All Listings by this Company

alpex Duo XS and alpex L (PPSU & Brass) ranges of press fittings for use with alpex Duo XS (F and TH press profiles) & alpex L pipe (F press profile only). Maximum working pressure 10.0 bar. The maximum operating temperature is 95oC.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2307913

Size:

16mm-63mm.

Marking:

Pipe – FRANKISCHE, Size, PE-Xb/Al/PE-RT, date of production, made in Germany, operation parameters. Fittings – ‘F’, size, PPSU, production date.

Installation Requirements:

R001 R008

Expiry date:

31/07/2028

Model:

alpex duo XS - Multilayer metal PE-Xb/Al/PE-RT pipe (DN16, 20, 26, 32), alpex L - Multilayer metal PE-Xb/Al/PE-RT pipe (DN40, 50,63), alpex duo XS - Press fittings made of brass and PPSU (DN16, 20, 26, 32), alpex L - Press fittings made of brass and PPSU (DN40, 50, 63).

Approval Holder:

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Company Name

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Address

Hellinger Strasse 1, D-97438 Konigsberg, Germany

View All Listings by this Company

Manufacturer:

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Company Name

Frankische Rohrwerke Gebr Kirchner GmbH & C0 KG

Address

Hellinger Strasse 1, D-97438 Konigsberg, Germany

View All Listings by this Company

PLAS-FIT range of polypropolene fittings for use with PE pipe (manufactured to EN 12201). Maximum working pressure 16 bar. Cold water use.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207397

Note:

For above and below ground use

Size:

20mm – 63mm.

Marking:

Plas-Fit, PN & size on nut.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

PLAS-FIT compression fittings 250**T00** TEE REDUCING 25X20X25 250**T00** TEE REDUCING 32X25X32 250**T00** TEE REDUCING 40X32X40 250**T00** TEE REDUCING 50X25X50 250**T00** TEE REDUCING 50X40X50 250**T00** TEE REDUCING 63X25X63 250**T00** TEE REDUCING 63X32X63 250**T00** TEE REDUCING 63X40X63 250**T00** TEE REDUCING 63X50X63 250**M01** A ADAPTOR MALE 20X1/2" 250**M01** A ADAPTOR MALE 20X3/4" 250**M01** A ADAPTOR MALE 20X1" 250**M01** A ADAPTOR MALE 25X1/2" 250**M01** A ADAPTOR MALE 25X3/4" 250**M01** A ADAPTOR MALE 25X1" 250**M01** A ADAPTOR MALE 32X1/2" 250**M01** A ADAPTOR MALE 32X3/4" 250**M01** A ADAPTOR MALE 32X1" 250**M01** A ADAPTOR MALE 32X11/4" 250**M01** A ADAPTOR MALE 32X11/2" 250**M01** A ADAPTOR MALE 40X1" 250**M01** A ADAPTOR MALE 40X11/4" 250**M01** A ADAPTOR MALE 40X11/2" 250**M01** A ADAPTOR MALE 40X2" 250**M01** A ADAPTOR MALE 50X1" 250**M01** A ADAPTOR MALE 50X11/4" 250**M01** A ADAPTOR MALE 50X11/2" 250**M01** A ADAPTOR MALE 50X2" 250**M01** A ADAPTOR MALE 63X11/2" 250**M01** A ADAPTOR MALE 63X2" 250**M01** A ADAPTOR MALE 63X21/2" 250**M02** ADAPTOR FEMALE 20X1/2" 250**M02** ADAPTOR FEMALE 20X3/4" 250**M02** ADAPTOR FEMALE 20X3/8" 250**M02** ADAPTOR FEMALE 25X1/2" 250**M02** ADAPTOR FEMALE 25X3/4" 250**M02** ADAPTOR FEMALE 25X1" 250**M02** ADAPTOR FEMALE 32X1/2" 250**M02** ADAPTOR FEMALE 32X3/4" 250**M02** ADAPTOR FEMALE 32X1" 250**M02** ADAPTOR FEMALE 32X11/4" 250**M02** ADAPTOR FEMALE 32X11/2" 250**M02** ADAPTOR FEMALE 40X1" 250**M02** ADAPTOR FEMALE 40X11/4" 250**M02** ADAPTOR FEMALE 40X11/2" 250**M02** ADAPTOR FEMALE 50X11/4" 250**M02** ADAPTOR FEMALE 50X11/2" 250**M02** ADAPTOR FEMALE 50X2" 250**M02** ADAPTOR FEMALE 63X11/2" 250**M02** ADAPTOR FEMALE 63X2" 250**M02** ADAPTOR FEMALE 63X21/2" 250**S0*** END PLUG 20MM 250**S0*** END PLUG 25MM 250**S0*** END PLUG 32MM 250**S0*** END PLUG 40MM 250**S0*** END PLUG 50MM 250**S0*** END PLUG 63MM 250**M0*** COUPLING 20X20 250**M0*** COUPLING 25X25 250**M0*** COUPLING 32X32 250**M0*** COUPLING 40X40 250**M0*** COUPLING 50X50 250**M0*** COUPLING 63X63 250**D0*** REDUCING COUPLING 25X20 250**D0*** REDUCING COUPLING 32X20 250**D0*** REDUCING COUPLING 32X25 250**D0*** REDUCING COUPLING 40X25 250**D0*** REDUCING COUPLING 40X32 250**D0*** REDUCING COUPLING 50X25 250**D0*** REDUCING COUPLING 50X32 250**D0*** REDUCING COUPLING 50X40 250**D0*** REDUCING COUPLING 63X25 250**D0*** REDUCING COUPLING 63X32 250**D0*** REDUCING COUPLING 63X40 250**D0*** REDUCING COUPLING 63X50 250**Z00** ELBOW 90 20X20 250**Z00** ELBOW 90 25X25 250**Z00** ELBOW 90 32X32 250**Z00** ELBOW 90 40X40 250**Z00** ELBOW 90 50X50 250**Z00** ELBOW 90 63X63 250**Z01** ELBOW THREADED MALE 20X1/2" 250**Z01** ELBOW THREADED MALE 20X3/4" 250**Z01** ELBOW THREADED MALE 25X1/2" 250**Z01** ELBOW THREADED MALE 25X3/4" 250**Z01** ELBOW THREADED MALE 25X1" 250**Z01** ELBOW THREADED MALE 32X3/4" 250**Z01** ELBOW THREADED MALE 32X1" 250**Z01** ELBOW THREADED MALE 40X11/4" 250**Z01** ELBOW THREADED MALE 40X11/2" 250**Z01** ELBOW THREADED MALE 50X11/2" 250**Z01** ELBOW THREADED MALE 50X2" 250**Z01** ELBOW THREADED MALE 63X2" 250**Z01** ELBOW THREADED MALE 63X21/2" 250**Z02** ELBOW THREADED FEMALE 20X1/2" 250**Z02** ELBOW THREADED FEMALE 20X3/4" 250**Z02** ELBOW THREADED FEMALE 25X1/2" 250**Z02** ELBOW THREADED FEMALE 25X3/4" 250**Z02** ELBOW THREADED FEMALE 25X1" 250**Z02** ELBOW THREADED FEMALE 32X1/2" 250**Z02** ELBOW THREADED FEMALE 32X3/4" 250**Z02** ELBOW THREADED FEMALE 32X1" 250**Z02** ELBOW THREADED FEMALE 40X11/4" 250**Z02** ELBOW THREADED FEMALE 40X11/2" 250**Z02** ELBOW THREADED FEMALE 50X11/2" 250**Z02** ELBOW THREADED FEMALE 50X2" 250**Z02** ELBOW THREADED FEMALE 63X2" 250**Z02** ELBOW THREADED FEMALE 63X21/2" 250**W02** WALL ELBOW F 20X1/2 COMPRESSION 250**W02** WALL ELBOW F 25X1/2 COMPRESSION 250**W02** WALL ELBOW F 25X3/4 COMPRESSION 250**T02** TEE THREADED FEMALE 20X1/2"X20 250**T02** TEE THREADED FEMALE 20X3/4"X20 250**T02** TEE THREADED FEMALE 25X1/2"X25 250**T02** TEE THREADED FEMALE 25X3/4"X25 250**T02** TEE THREADED FEMALE 25X1"X25 250**T02** TEE THREADED FEMALE 32X1/2"X32 250**T02** TEE THREADED FEMALE 32X3/4"X32 250**T02** TEE THREADED FEMALE 32X1"X32 250**T02** TEE THREADED FEMALE 40X11/4"X40 250**T02** TEE THREADED FEMALE 40X11/2"X40 250**T02** TEE THREADED FEMALE 50X11/2"X50 250**T02** TEE THREADED FEMALE 50X2"X50 250**T02** TEE THREADED FEMALE 63X2"X63 250**T02** TEE THREADED FEMALE 63X21/2"X63 250**T01** TEE THREADED MALE 20X1/2"X20 250**T01** TEE THREADED MALE 20X3/4"X20 250**T01** TEE THREADED MALE 20X1"X20 250**T01** TEE THREADED MALE 25X1/2"X25 250**T01** TEE THREADED MALE 25X3/4"X25 250**T01** TEE THREADED MALE 25X1"X25 250**T01** TEE THREADED MALE 32X1/2"X32 250**T01** TEE THREADED MALE 32X3/4"X32 250**T01** TEE THREADED MALE 32X1"X32 250**T01** TEE THREADED MALE 40X1"X40 250**T01** TEE THREADED MALE 40X11/4"X40 250**T01** TEE THREADED MALE 40X11/2"X40 250**T01** TEE THREADED MALE 50X11/2"X50 250**T01** TEE THREADED MALE 50X2"X50 250**T01** TEE THREADED MALE 63X2"X63 250**O0*** FLANGED ADAPTOR 50X11/2 250**O0*** FLANGED ADAPTOR 50X2 250**O0*** FLANGED ADAPTOR 63X2 250**O0*** FLANGED ADAPTOR 63X21/2 250**F0*** FLANGED ADAPTOR 50X11/2 (4 B) 250**F0*** FLANGED ADAPTOR 50X2 (4 B) 250**F0*** FLANGED ADAPTOR 63X2 (4 B) 250**F0*** FLANGED ADAPTOR 63X21/2 (4 B) 250**K0*** REPAIR COUPLING 25X25 250**K0*** REPAIR COUPLING 32X32 250**K0*** REPAIR COUPLING 40X40 250**K0*** REPAIR COUPLING 50X50 250**K0*** REPAIR COUPLING 63X63

Approval Holder:

Plas-Fit Ltd.

Company Name

Plas-Fit Ltd.

Address

Bar-Lev Industrial Park Hacharuv 10, Misgav

Country

Israel

View All Listings by this Company

Range of Conex >B< press fittings incorporating copper & brass bodies for use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309059

Size:

See models. Note, all sizes in XXmm are Press fit.

Marking:

Conex (>B<) logo and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

P4001G – 90° Bend with male thread P4001G01503000 – 15mm X 3/8” BSP (M) P4001G01504000 – 15mm X ½” BSP (M) P4001G02206000 – 22mm X ¾” BSP (M) P4001G02808000 – 28mm X 1” BSP (M) P4001G03510000 – 35mm X 1.1/4” BSP (M) P4001G04212000 – 42mm X 1.1/2” BSP (M) P4001G05416000 – 54mm X 2” BSP (M) P4090G – Elbow with female thread P4090G01503000 – 15mm X 3/8” BSP (F) P4090G01504000 – 15mm X ½” BSP (F) P4090G01606000 – 15mm X ¾” BSP (F) P4090G02204000 – 22mm X ½” BSP (F) P4090G02206000 – 22mm X ¾” BSP (F) P4090G02208000 – 22mm X 1” BSP (F) P4090G02808000 – 28mm X 1” BSP (F) P4090G03510000 – 35mm X 1.1/4” BSP (F) P4090G04212000 – 42mm X 1.1/2” BSP (F) P4090G05416000 – 54mm X 2” BSP (F) P4130G – Tee with female threaded branch P4130G01503015 – 15mm X 3/8” BSP (F) X 15mm P4130G01504015 – 15mm X ½” BSP (F) X 15mm P4130G02204022 – 22mm X ½” BSP (F) X 22mm P4130G02206022 – 22mm X ¾” BSP (F) X 22mm P4130G02804028 – 28mm X ½” BSP (F) X 28mm P4130G02806028 – 28mm X ¾” BSP (F) X 28mm P4130G03504035 – 35mm X ½” BSP (F) X 35mm P4130G04204042 – 42mm X ½” BSP (F) X 42mm P4130G05404054 – 54mm X ½” BSP (F) X 54mm P4132G – Tee with male threaded branch P4132G01504015 – 15mm X ½” BSP (M) X 15mm P4132G02204022 – 22mm X ½” BSP (M) X 22mm P4132G02206022 – 22mm X ¾” BSP (M) X 22mm P4132G02804028 – 28mm X ½” BSP (M) X 28mm P4132G02806028 – 28mm X ¾” BSP (M) X 28mm P4132G03504035 – 35mm X ½” BSP (M) X 35mm P4132G04204042 – 42mm X ½” BSP (M) X 42mm P4132G05404054 – 54mm X ½” BSP (M) X 54mm P4243G – Male straight connector body P4243G01503000 – 15mm x 3/8” BSP (M) P4243G01504000 – 15mm x ½” BSP (M) P4243G01506000 – 15mm x ¾” BSP (M) P4243G02204000 – 22mm x ½” BSP (M) P4243G02206000 – 22mm x ¾” BSP (M) P4243G02208000 – 22mm x 1” BSP (M) P4243G02806000 – 28mm x ¾” BSP (M) P4243G02808000 – 28mm x 1” BSP (M) P4243G02810000 – 28mm x 1.1/4” BSP (M) P4243G03508000 – 35mm x 1” BSP (M) P4243G03510000 – 35mm x 1.1/4” BSP (M) P4243G03512000 – 35mm x 1.1/2” BSP (M) P4243G04210000 – 42mm x 1.1/4” BSP (M) P4243G04212000 – 42mm x 1.1/2” BSP (M) P4243G05412000 – 54mm x 1.1/2” BSP (M) P4243G05416000 – 54mm x 2” BSP (M) P4270G – Female straight connector body P4270G01503000 – 15mm X 3/8” BSP (F) P4270G01504000 – 15mm X 1/2” BSP (F) P4270G01506000 – 15mm X 3/4” BSP (F) P4270G02204000 – 22mm X ½” BSP (F) P4270G02206000 – 22mm X ¾” BSP (F) P4270G02208000 – 22mm X 1” BSP (F) P4270G02210000 – 22mm X 1.1/4” BSP (F) P4270G02806000 – 28mm X ¾” BSP (F) P4270G02808000 – 28mm X 1” BSP (F) P4270G02810000 – 28mm X 1.1/4” BSP (F) P4270G03508000 – 35mm X 1” BSP (F) P4270G03510000 – 35mm X 1.1/4” BSP (F) P4270G04210000 – 42mm X 1.1/4” BSP (F) P4270G04212000 – 42mm X 1.1/2” BSP (F) P4270G05416000 – 54mm X 2” BSP (F) P4275 – Slip Couler P4275 015000000 – 15mm P4275 022000000 – 22mm P4275 028000000 – 28mm P4275 035000000 – 35mm P4275 042000000 – 42mm P4275 054000000 – 54mm P4280G – Male Adaptor P4280G01504000 – 15mm X ½” BSP (M) P4280G02204000 – 22mm X ½” BSP (M) P4280G02206000 – 22mm X ¾” BSP (M) P4280G02808000 – 28mm X 1” BSP (M) P4280G03510000 – 35mm X 1.1/4” BSP (M) P4281G – Female Adaptor P4281G01504000 – 15mm X ½” BSP (F) P4281G02204000 – 22mm X ½” BSP (F) P4281G02206000 – 22mm X ¾” BSP (F) P4281G02808000 – 28mm X 1” BSP (F) P4281G03508000 – 35mm X 1” BSP (F) P4355 – Flat Face Connector P4355 01504000 – 15mm X ½” BSP (F) P4355 01506000 – 15mm X ¾” BSP (F) P4355 02206000 – 22mm X ¾” BSP (F) P4355 02208000 – 22mm X 1” BSP (F) P4355 02810000 – 28mm X 1.1/4” BSP (F) P4355 03512000 – 35mm X 1.1/2” BSP (F) P4355 04214000 – 35mm X 1.3/4” BSP (F) P4355 05419000 – 54mm X 2.3/8” BSP (F) P4471G – WallPlate Elbow P4471G01504000 – 15mm X ½” BSP (F) P4471G02206000 – 22mm X ¾” BSP (F) P5001 – 90° Street Bend P5001 015000000 – 15mm P5001 022000000 – 22mm P5001 028000000 – 28mm P5001 035000000 – 35mm P5001 042000000 – 42mm P5001 054000000 – 54mm P5002 – 90° Bend P5002 015000000 – 15mm P5002 022000000 – 22mm P5002 028000000 – 28mm P5002 035000000 – 35mm P5002 042000000 – 42mm P5002 054000000 – 54mm P5002L – 90° Bend Long P5002L015000000 – 15mm P5002L022000000 – 22mm P5002L028000000 – 28mm P5040 – 45° Street Bend P5040 015000000 – 15mm P5040 022000000 – 22mm P5040 028000000 – 28mm P5040 035000000 – 35mm P5040 042000000 – 42mm P5040 054000000 – 54mm P5041 – 45° Obtuse Bend P5041 015000000 – 15mm P5041 022000000 – 22mm P5041 028000000 – 28mm P5041 035000000 – 35mm P5041 042000000 – 42mm P5041 054000000 – 54mm P5060 – Return Bend P5060 022000000 – 22mm P5085 – Crossover Coupler P5085 015000000 – 15mm P5085 022000000 – 22mm P5130 – Equal Tee P5130 01515015 – 15mm P5130 02222022 – 22mm P5130 02828028 – 28mm P5130 03535035 – 35mm P5130 04242042 – 42mm P5130 05454054 – 54mm P5130RB – Reduced Branch Tee P5130 02215022 – 22mm x 15mm x 22mm P5130 02815028 – 28mm x 15mm x 28mm P5130 02822028 – 28mm x 22mm x 28mm P5130 03515035 – 35mm x 15mm x 35mm P5130 03522035 – 35mm x 22mm x 35mm P5130 03528035 – 35mm x 28mm x 35mm P5130 04222042 – 42mm x 22mm x 42mm P5130 04228042 – 42mm x 28mm x 42mm P5130 04235042 – 42mm x 35mm x 42mm P5130 05422054 – 54mm x 22mm x 54mm P5130 05428054 – 54mm x 28mm x 54mm P5130 05435054 – 54mm x 35mm x 54mm P5130 05442054 – 54mm X 42mm X 54mm P5130RBE – Reduced Both End Tee P5130 01522015 – 15mm X 22mm X 15mm P5130 02228022 – 22mm X 28mm X 22mm P5130RE – Reduced End Tee P5130 02222015 – 22mm X 22mm X 15mm P5130 02828015 – 28mm X 28mm X 15mm P5130 02822022 – 28mm X 22mm X 22mm P5130REB – Reduced End & Branch Tee P5130 02215022 – 22mm X 1mm5 X 22mm P5130 02815028 – 28mm X 15mm X 28mm P5130 02822022 – 28mm X 22mm X 22mm P5130 03522028 – 35mm X 22mm X 28mm P5130 03528028 – 35mm X 28mm X 28mm P5130 04235035 – 42mm X 35mm X 35mm P5130 05442042 – 54mm X 42mm X 42mm P5240 – Reduced Straight Coupler P5240 02215000 – 22mm X 15mm P5240 02822000 – 28mm X 22mm P5240 03528000 – 35mm X 28mm P5240 04235000 – 42mm X 35mm P5240 05442000 – 54mm X 42mm P5270 – Straight Coupler P5270 01500000 – 15mm P5270 02200000 – 22mm P5270 02800000 – 28mm P5270 03500000 – 35mm P5270 04200000 – 42mm P5270 05400000 – 54mm P5270S – Slip Coupler P5270S01500000 – 15mm P5270S02200000 – 22mm P5270S02800000 – 28mm P5270S03500000 – 35mm P5270S04200000 – 42mm P5270S05400000 – 54mm P5301 – End Cap P5301 01500000 – 15mm P5301 02200000 – 22mm P5301 02800000 – 28mm P5301 03500000 – 35mm P5301 04200000 – 42mm P5301 05400000 – 54mm P5243 – Fitting Reducer P5243 02215000 – 22mm X 15mm P5243 02815000 – 28mm X 15mm P5243 02822000 – 28mm X 22mm P5243 03522000 – 35mm X 22mm P5243 03528000 – 35mm X 28mm P5243 04222000 – 42mm X 22mm P5243 04228000 – 42mm X 28mm P5243 04235000 – 42mm X 35mm P5243 05435000 – 54mm X 35mm P5243 05442000 – 54mm X 42mm P4093 – Wallplate Elbow Tank Connector P4093 01504025 – 15mm X ½” BSP (M) P4093 01504035 – 15mm X ½” BSP (M) P4096G – Female Bent Union P4096G01504000 – 15mm X ½” BSP (F) P4096G02206000 – 22mm X ¾” BSP (F) P4096G02808000 – 28mm X 1” BSP (F) P4096G03510000 – 35mm X 1.1/4” BSP (F) P4096G04212000 – 42mm X 1.1/2” BSP (F) P4096G05416000 – 54mm X 2” BSP (F) P4244 – Straight Wallplate Elbow Tank Connector P2422G01504025- 15mm X ½” BSP (M) P4330 – Union P4330 01500000 – 15mm P4330 02200000 – 22mm P4330 02800000 – 28mm P4330 03500000 – 35mm P4330 04200000 – 42mm P4330 05400000 – 54mm P4330G – Female Straight Union Connector (BSP) P4330G01504000 – 15mm X ½” BSP (F) P4330G01506000 – 15mm X ¾” BSP (F) P4330G02206000 – 22mm X ¾” BSP (F) P4330G02208000 – 22mm X 1” BSP (F) P4330G02808000 – 28mm X 1” BSP (F) P4330G03510000 – 35mm X 1.1/4” BSP (F) P4330G04212000 – 42mm X 1.1/2” BSP (F) P4330G05416000 – 54mm X 2” BSP (F) P4331G – Male Straight Union Connector (BSP) P4331G01504000 – 15mm X ½” BSP (M) P4331G01506000 – 15mm X ¾” BSP (M) P4331G02204000 – 22mm X ½” BSP (M) P4331G02206000 – 22mm X ¾” BSP (M) P4331G02208000 – 22mm X 1” BSP (M) P4331G02808000 – 28mm X 1” BSP (M) P4331G03510000 – 35mm X 1.1/4” BSP (M) P4331G04212000 – 42mm X 1.1/2” BSP (M) P4331G05416000 – 54mm X 2” BSP (M)

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of copper end feed solder fittings for use with copper tube (EN1057). For above and below ground use. Maximum working pressure for sizes 8mm to 54mm is 25.0 bar. Maximum working pressure for sizes above 54mm is 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309041

Size:

See models

Marking:

Size and Howhi’s logo on fitting body

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Coupling (rolled stop): 100EN08AB - 8mm, 100EN10AB - 10mm, 100EN12AB - 12mm, 100EN15AB - 15mm, 100EN22AB - 22mm, 100EN28AB - 28mm, 100EN35AB - 35mm, 100EN42AB - 42mm, 100EN54AB - 54mm, 100EN67AB - 67mm, 100EN76AB - 76mm 100EN108AB - 108mm. Reducing Coupling: 101EN1008AB - 10 x 8mm, 101EN1210AB - 12 x 10mm, 101EN1508AB - 15 x 8mm, 101EN1510AB - 15 x 10mm, 101EN1512AB - 15 x 12mm, 101EN2215AB - 22 x 15mm, 101EN2815AB - 28 x 15mm, 101EN2822AB - 28 x 22mm, 101EN3522AB - 35 x 22mm, 101EN3528AB - 35 x 28mm, 101EN4222AB - 42 x 22mm, 101EN4235AB - 42 x 35mm, 101EN4228AB - 42 x 28mm, 101EN5428AB - 54 x 28mm, 101EN5435AB - 54 x 35mm, 101EN5442AB - 54 x 42mm, 101WE1512AB - 15mm x ½”, 101WE2221AB - 22mm x ¾” 101WE2825AB - 28mm x 1”. Fitting Reducer (M/F): 102EN1008AB - 10 x 8mm, 102EN1208AB - 12 x 8mm, 102EN1210AB - 12 x 10mm, 102EN1508AB - 15 x 8mm, 102EN1510AB - 15 x 10mm, 102EN1512AB - 15 x 12mm, 102EN2210AB - 22 x 10mm, 102EN2212AB - 22 x 12mm, 102EN2215AB - 22 x 15mm, 102EN2812AB - 28 x 12mm, 102EN2815AB - 28 x 15mm, 102EN2822AB - 28 x 22mm, 102EN3515AB - 35 x 15mm, 102EN3522AB - 35 x 22mm, 102EN3528AB - 35 x 28mm, 102EN4215AB - 42 x 15mm, 102EN4222AB - 42 x 22mm, 102EN4228AB - 42 x 28mm, 102EN4235AB - 42 x 35mm, 102EN5415AB - 54 x 15mm, 102EN5422AB - 54 x 22mm, 102EN5428AB - 54 x 28mm, 102EN5435AB - 54 x 35mm, 102EN5442AB - 54 x 42mm, 102EN6728AB - 67 x 28mm, 102EN6735AB - 67 x 35mm, 102EN6742AB - 67 x 42mm, 102EN6754AB - 67 x 54mm, 102EN7628AB - 76 x 28mm, 102EN7635AB - 76 x 35mm, 102EN7642AB - 76 x 42mm, 102EN7654AB - 76 x 54mm, 102EN7667AB - 76 x 67mm 102EN10854AB - 108 x 54mm. 90° ELBOW: 103EN08AB - 8mm, 103EN10AB - 10mm, 103EN12AB - 12mm, 103EN15AB - 15mm, 103EN22AB - 22mm, 103EN28AB - 28mm, 103EN35AB - 35mm, 103EN42AB - 42mm, 103EN54AB - 54mm, 103EN67AB - 67mm, 103EN76AB - 76mm & 103EN108AB - 108mm. 90° Street Elbow (M/F) 104EN08AB - 8mm, 104EN10AB - 10mm, 104EN12AB - 12mm, 104EN15AB - 15mm, 104EN22AB - 22mm, 104EN28AB - 28mm, 104EN35AB - 35mm, 104EN42AB - 42mm, 104EN54AB - 54mm, 104EN67AB - 67mm, 104EN76AB - 76mm 104EN108AB - 108mm. 90° Elbow (Long Radius): 105EN10AB - 10mm, 105EN12AB - 12mm, 105EN15AB - 15mm, 105EN18AB - 18mm, 105EN22AB - 22mm, 105EN28AB - 28mm, 105EN35AB - 35mm, 105EN42AB - 42mm, 105EN54AB - 54mm. 90° Street Elbow Long Turn (M/F): 106EN06AB - 6mm, 106EN08AB - 8mm, 106EN10AB - 10mm, 106EN12AB - 12mm, 106EN28AB - 28mm, 106EN35AB - 35mm, 106EN42AB - 42mm 106EN54AB - 54mm 45° Elbow: 107EN08AB - 8mm, 107EN10AB - 10mm, 107EN15AB - 15mm, 107EN22AB - 22mm, 107EN28AB - 28mm, 107EN35AB - 35mm, 107EN42AB - 42mm, 107EN54AB - 54mm, 107EN67AB - 67mm, 107EN76AB - 76mm 107EN108AB - 108mm. 45° Elbow (M/F): 108EN08AB - 8mm, 108EN10AB - 10mm, 108EN15AB - 15mm, 108EN22AB - 22mm, 108EN28AB - 28mm, 108EN35AB - 35mm, 108EN42AB - 42mm 108EN54AB - 54mm. Slip Coupling: 111EN15AB - 15mm, 111EN22AB - 22mm, 111EN28AB - 28mm, 111EN35AB - 35mm, 111EN42AB - 42mm 111EN54AB - 54mm. Equal Tee: 112EN08AB - 8mm, 112EN10AB - 10mm, 112EN12AB - 12mm, 112EN15AB - 15mm, 112EN22AB - 22mm, 112EN28AB - 28mm, 112EN35AB - 35mm, 112EN42AB - 42mm, 112EN54AB - 54mm, 112EN67AB - 67mm, 112EN76AB - 76mm & 112EN108AB - 108mm. Reducing Tee: 113EN080806AB - 8 x 8 x 6mm, 113EN101008AB - 10 x 10 x 8mm, 113EN121208AB - 12 x 12 x 8mm, 113EN121210AB - 12 x 12 x 10mm, 113EN151508AB - 15 x 15 x 8mm, 113EN151510AB - 15 x 15 x 10mm, 113EN151512AB - 15 x 15 x 12mm, 113EN222210AB - 22 x 22 x 10mm, 113EN222215AB - 22 x 22 x 15mm, 113EN282815AB - 28 x 28 x 15mm, 113EN282822AB - 28 x 28 x 22mm, 113EN353515AB - 35 x 35 x 15mm, 113EN353522AB - 35 x 35 x 22mm, 113EN353528AB - 35 x 35 x 28mm & 113EN424215AB - 42 x 42 x 15mm. Reducing Tee: 113EN424222AB - 42 x 42 x 22mm, 113EN424228AB - 42 x 42 x 28mm, 113EN424235AB - 42 x 42 x 35mm, 113EN545415AB - 54 x 54 x 15mm, 113EN545422AB - 54 x 54 x 22mm, 113EN545428AB - 54 x 54 x 28mm, 113EN545435AB - 54 x 54 x 35mm, 113EN545442AB - 54 x 54 x 42mm, 113EN676728AB - 67 x 67 x 28mm, 113EN676735AB - 67 x 67 x 35mm, 113EN676742AB - 67 x 67 x 42mm, 113EN676754AB - 67 x 67 x 54mm, 113EN767628AB - 76 x 76 x 28mm, 113EN767635AB - 76 x 76 x 35mm, 113EN767642AB - 76 x 76 x 42mm, 113EN767654AB - 76 x 76 x 54mm, 113EN767667AB - 76 x 76 x 67mm, 113EN10810854AB - 108 x 108 x 54mm, 113EN10810867AB - 108 x 108 x 67mm, 113EN10810876AB - 108 x 108 x 76mm, 114EN151010AB - 15 x 10 x 10mm, 114EN151015AB - 15 x 10 x 15mm, 114EN221515AB - 22 x 15 x 15mm, 114EN221522AB - 22 x 15 x 22mm, 114EN281515AB - 28 x 15 x 15mm, 114EN281522AB - 28 x 15 x 22mm, 114EN281528AB - 28 x 15 x 28mm, 114EN282215AB - 28 x 22 x 15mm, 114EN282222AB - 28 x 22 x 22mm, 114EN282228AB - 28 x 22 x 28mm, 114EN352222AB - 35 x 22 x 22mm, 114EN352235AB - 35 x 22 x 35mm, 114EN352815AB - 35 x 28 x 15mm, 114EN352822AB - 35 x 28 x 22mm, 114EN352828AB - 35 x 28 x 28mm, 114EN352835AB - 35 x 28 x 35mm, 114EN422828AB - 42 x 28 x 28mm, 114EN544242AB - 54 x 42 x 42mm, 114EN675467AB - 67 x 54 x 67mm, 115EN121215AB - 12 x 12 x 15mm, 115EN151522AB - 15 x 15 x 22mm, 115EN222228AB - 22 x 22 x 28mm 115EN282835AB - 28 x 28 x 35mm. Reducing 90° Elbow (short): 121EN2215AB - 22 x 15mm. Stop End: 137EN08AB - 8mm, 137EN10AB - 10mm, 137EN15AB - 15mm, 137EN22AB - 22mm, 137EN28AB - 28mm, 137EN35AB - 35mm, 137EN42AB - 42mm, 137EN54AB - 54mm, 137EN67AB - 67mm, 137EN76AB - 76mm 137EN108AB - 108mm. Full Crossover: 138EN15AB - 15mm 138EN22AB - 22mm. Partial Crossover (M/F): 148EN15AB - 15mm 148EN22AB - 22mm.

Approval Holder:

Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name

Zhuji City Howhi Air Conditioners Made Co Ltd

Address

Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Manufacturer:

Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name

Zhuji City Howhi Air Conditioners Made Co Ltd

Address

Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Dual flush WC drop valve with an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2309005

Size:

2” BSP (M)

Marking:

Fluidmaster and WRAS on body

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/09/2028

Model:

821WB-FEP

Approval Holder:

Fluidmaster, Inc.

Company Name

Fluidmaster, Inc.

Address

30800 Rancho Viejo Road San Juan Capistrano

Postcode

CA 92675

Country

United States

Phone

1-949-796-2653

General Email

jloera@fluidmaster.com

View All Listings by this Company

Dual flush WC outlet valve with ABS body. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Maximum operating temperature – Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2309032

Size:

2” BSP (M)

Marking:

Oceanwell Xiamen industrial company and model on body

Installation Requirements:

R001 R571 R580 R581

Expiry date:

30/09/2028

Model:

D33-J318-01

Approval Holder:

OceanWell (Xiamen) Industrial Co Ltd

Company Name

OceanWell (Xiamen) Industrial Co Ltd

Address

No. 33, Shishan North Road, Dongfu Town Haicang District., Xiamen Province, P.R China

View All Listings by this Company

Manufacturer:

OceanWell (Xiamen) Industrial Co Ltd

Company Name

OceanWell (Xiamen) Industrial Co Ltd

Address

No. 33, Shishan North Road, Dongfu Town Haicang District., Xiamen Province, P.R China

View All Listings by this Company

Range of urinal flushing mechanisms incorporating nylon bodies and a solenoid valve which controls the flow and is actuated via an infra-red sensor. The inlet of the solenoid valve incorporates a stainless-steel strainer. Maximum working pressure 5.0 bar. Cold water use only.

Section:

1307 Flushing Mechanisms

Section Subtitle:

Urinals.

WRAS Approval Number:

2309028

Size:

¾” BSP (F)

Marking:

Delabie on Sensor.

Installation Requirements:

R001 R075 R090

Expiry date:

30/09/2028

Model:

Tempomatic 4 Urinal 430SBOX - Recessed waterproof housing, mains supply 430000 wall plate 430010 wall plate 430020 wall plate 430030 wall plate 430PBOX - Recessed waterproof housing, battery supply 430006 wall plate 430016 wall plate 430026 wall plate 430036 wall plate

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Range of wall mounted combination boilers providing domestic hot water via a heat exchanger and pressurised central heating system. The products can be supplied with a rigid or flexible filling loop or keyless filling link. The flexible and rigid filling loops incorporate a flexible hose or copper pipe, isolation valve, double check valve assembly (suitable for back flow protection against fluid category 3). The keyless filling link incorporates a CAB backflow prevention device (suitable for back flow protection against fluid category 3). The products also incorporate an expansion vessel and pressure relief valve set at 3.0 bar. Maximum working pressure of primary circuit 2.5 bar. Maximum operating temperature of primary circuit 85°C Maximum working pressure of secondary circuit 8.0 bar Maximum operating temperature of secondary circuit 60°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2309044

Note:

When installing the keyless filling link, the discharge from the relief outlet port of this fitting must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.

Size:

¾” BSP (M) (primary circuit). ½” BSP (M) (secondary circuit).

Marking:

Baxi on front cover.

Installation Requirements:

R001 R140 R360

Expiry date:

30/09/2028

Model:

7796586 BAXI 624 COMBI 2 7796587 BAXI 630 COMBI 2 7796588 BAXI 636 COMBI 2 7813609 BAXI 624 COMBI LPG 2 7814304 BAXI 824 COMBI 2 7814305 BAXI 830 COMBI 2 7814306 BAXI 836 COMBI 2 7814307 BAXI 830 COMBI LPG 2 7814308 BAXI 836 COMBI LPG 2 7814309 BAXI ASSURE 524 COMBI 2 7814310 BAXI ASSURE 530 COMBI 2 7814311 BAXI ASSURE 536 COMBI 2 7814312 BAXI ASSURE 530 COMBI LPG 2

Approval Holder:

Baxi Heating UK Limited

Company Name

Baxi Heating UK Limited

Address

Brooks House, Coventry Road, Warwick

Postcode

CV34 3LL

View All Listings by this Company