“>B<Press NZ” range of press fittings incorporating copper (EN12165 CW024A) or copper alloy (CC499K-DW) bodies. For use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251108015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

>B< (Conex logo) & size on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Copper alloy bodies: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (F), PIR4090G060600 – ¾” x ¾” BSP (F). PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½”, PIR4092G060600 – ¾” x ¾”. PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M), PIR4243G040600 – ½” x ¾” BSP (M), PIR4243G060400 – ¾” x ½” BSP (M), PIR4243G060600 – ¾” x ¾” BSP (M), PIR4243G080600 – 1” x ¾” BSP (M), PIR4243G080800 – 1” x 1” BSP (M). PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (F), PIR4471G060600 – ¾” – ¾” BSP (F). PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M). PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M), PIR4270G060600 – ¾” x ¾” BSP (M), PIR4270G080800 – 1” x 1” BSP (M). Copper bodies: PIR5040; - 45° Street Elbow PIR5040 040000 – ½”, PIR5040 060000 – ¾”, PIR5040 080000 – 1”. PIR5001; - 90° Street Bend PIR5001 040000 – ½”, PIR5001 060000 – ¾”, PIR5001 080000 – 1”. PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½”, PIR5240 080400 – 1” x ½”, PIR5240 080600 – 1” x ¾”. PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½”. PIR5002; - 90° Bend PIR5002 040000 – ½”, PIR5002 060000 – ¾”, PIR5002 080000 – 1”. PIR5041; - 45° Elbow PIR5041 040000 – ½”, PIR5041 060000 – ¾”, PIR5041 080000 – 1”. PIR5130; - Equal Tee PIR5130 040000 – ½”, PIR5130 060000 – ¾”, PIR5130 080000 – 1”. PIR5270; - Coupler PIR5270 040000 – ½” PIR5270 060000 – ¾” PIR5270 080000 – 1” PIR5301; – Stop End PIR5301 040000 – ½”, PIR5301 060000 – ¾”, PIR5301 080000 – 1”. PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” PIR5130 080408 – 1” x ½” x 1” PIR5130 080608 – 1” x ¾” x 1” PIR5275; - Slip Coupler PIR5275 040000 – ½” PIR5275 060000 – ¾” PIR5275 080000 – 1” PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½”, PIR5243 080400 – 1” x ½”, PIR5243 080600 – 1” x ¾”. PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½”, PIR5130 080806 – 1” X 1” X ¾”, PIR5130 040604 – ½” X ¾” X ½”, PIR5130 060806 – ¾“ X 1” X ¾”, PIR5130 040804 – ½” X 1” X ½”, PIR5130 080404 – 1” X ½” X ½”, PIR5130 080604 – 1” X ¾” X ½”, PIR5130 080406 – 1” X ½” X ¾”.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa S.L & IBP Instalfittings Sp z o.o.,

Company Name

IBP Atcosa S.L & IBP Instalfittings Sp z o.o.,

Address

IBP Atcosa S.L - Polígono Industrial Quintos-Aeropuerto, 14005 Córdoba Spain & IBP Instalfittings Sp z o.o., - ul. Stanisława Zwierzchowskiego 29, 61-249 Poznań, Poland

General Email

View All Listings by this Company

Range of under counter, vented, electric instantaneous (near boiling) water heaters with a stainless steel tank and silicone seals. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

2309388

Note:

Open outlet use only.

Size:

8mm pushfit.

Marking:

Midea on front of body.

Installation Requirements:

R001 R040

Expiry date:

30/09/2028

Model:

DSK15BT (White).

Approval Holder:

Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.

Company Name

Wuhu Midea Kitchen and Bathroom Manufacturing Co., Ltd.

Address

East Road Wanchun, East Area Economic & Technological Development Area Wuhu City P.R.

Country

China

View All Listings by this Company

Range of water meter measuring capsules with brass bodies. Maximum working pressure 16.0 bar. Please refer to model for maximum operating temperature.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2" BSP male & 2¼” BSP male. M62 x 2 male, M64 x 2 male & M65 x 2 male.

Marking:

Zenner, model, year of manufacture (YYYY) and technical information on meter face.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

Maximum operating temperature 30°C: 129285 Minolist Q3-2.5. 166599 – Minomuk Q3-2.5. 166487 – Minotec Q3-2.5. 166489 – Minomoc Q3-2.5. 166489 + 128767 - Minomoc with Konverter Q3-2.5. 166597 – Minomet Q3-2.5. Maximum operating temperature 90°C: 129286 – Minolist Q3-2.5. 166600 – Minomuk Q3-2.5. 166488 – Minotec Q3-2.5. 166490 – Minomoc Q3-2.5. 166490 + 128767 - Minomoc with Konverter Q3-2.5. 166598 – Minomet Q3-2.5.

Approval Holder:

Zenner International Gmbh & Co. KG

Company Name

Zenner International Gmbh & Co. KG

Address

Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany

Country

Germany

View All Listings by this Company

Range of flow measurement devices (DZR brass) bodies incorporating two test ports. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Crane, CR, size, flow arrow and PN on the body.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

D901 - ½”, ¾”, 1”, 1 ¼”, 1 ½”, and 2” BSPT (BS EN 10226) - (M x F). D902 - ½” BSPT (BS EN 10226) - (M x F).

Approval Holder:

Crane Ltd

Company Name

Crane Ltd

Address

Crane House, Epsilon Terrace, West Road, Ipswich

Postcode

IP3 9FJ

Country

United Kingdom

Phone

01473 277 364

General Email

tturner@cranebsu.com

View All Listings by this Company

Range of stainless steel bodied mechanical pump shaft seals. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251106001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For installation into specifically dimensioned pumps.

Size:

Suitable for shaft sizes from 25 mm up to 195 mm.

Marking:

“Chesterton”; “442” on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

442C – Cartridge split mechanical seal (for shaft sizes from 25 mm up to 120 mm), 442C XL– Cartridge split mechanical seal (for shaft sizes from 125 mm up to 195 mm).

Approval Holder:

Chesterton International GmbH

Company Name

Chesterton International GmbH

Address

Am Lenzenfleck 23, DE-85737 Ismaning

Country

Germany

View All Listings by this Company

Range of multistage pumps with stainless steel bodies Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251102713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SPRING 60-X & 90-X: 1” BSP (F) inlet x 1” BSP (F) outlet, SPRING 120-X: 1¼” BSP (F) inlet x 1” BSP (F) outlet.

Marking:

FUJIAN VIKING INDUSTRY CO.,LTD logo (‘VK Flow’), model and other technical information on data plate.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

SPRING 60-X, SPRING 90-X, SPRING 120-X. Where: X denotes the number of stages: 2-5.

Approval Holder:

FUJIAN VIKING INDUSTRY CO.,LTD

Company Name

FUJIAN VIKING INDUSTRY CO.,LTD

Address

No.16，Jincheng road, Tiehu Industrial Zone, Fuan, Fujian,China

View All Listings by this Company

Range of shower handsets with plastic bodies and various finishes. Maximum operating temperature 60 °C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250612005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

“KEEKOE” on inlet connection.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

H01011, H01023, H02013, , H03013, H03021, H04011, H04023, H05014, H05015, H06013, H09015, H11013, H12013, H17015, H20013, H21011, H27015, H28013, H29033, H30043, H31015, H33013, H34013, H34021, H35013, H36011, H34021, H34021, H43014, H46014, H39033, H37013, H39031, H39013, H39043, H49014, H48013, H48021, H46023, H55013, H56013, H41013 & H42013.

Approval Holder:

Xiamen Keekoe Sanitary Ware Co. Ltd.

Company Name

Xiamen Keekoe Sanitary Ware Co. Ltd.

Address

No.275-279 Huanzhu Road North Jimei Industrial Zone Xiamen

Country

China

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Pull out plastic body handset for kitchen tap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Notes & Further Information

** Representative all models are available with the following finish code: CP-Polished Chrome BN-Brushed Nickel MB-Matte Black ORB-Oil Rubber Bronze PB-Polished Brass WP-Weathered Pewter BB-Brushed Brass

Approval Holder:

Kaiping Boyu Hose Technology Co., Ltd.

Company Name

Kaiping Boyu Hose Technology Co., Ltd.

Address

5 Dongcheng Road, Shuinuancheng, Shuikou Town, Kaiping City Guangdong Province

Country

China

View All Listings by this Company

Manufacturers:

Kaiping Boyu Hose Technology Co., Ltd.

Range of overhead shower outlets with (stainless steel bodies - various finishes). The inlet incorporates a combined EPDM washer and an approved check valve cartridge: however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure: Open outlet use only. Maximum operating temperature 65.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

251102026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

81xx8053 model: ABOUTWATER (brand of Fratelli Fantini S.p.A.) on body. 86xx8083 model: FANTINI on body.

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Model:

81xx8053 86xx8083 Where xx denotes finish and can be replaced by: 01 = Gold plus, 02 = Chrome, 13 = Matt Black, 29 = Matt White, 38 = 93 = Brushed Stainless steel, 95 = Nickel PVD, P5 = Matt Gun Metal PVD, P6 = Matt British Gold PVD, P9 = Matt Copper PVD, S1 = Deep Black PVD, Q7 = Pure Brass PVD, Q8 = Raw Metal PVD.

Approval Holder:

Fratelli Fantini Spa

Company Name

Fratelli Fantini Spa

Address

Via Buonarroti 4 28010 Pella Italy

View All Listings by this Company

Range of shower handsets with chromium plated plastic bodies. Maximum operating temperature 65.0°C Open outlet use only

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

251102039

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Grohe on handset

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Model:

27.571.20E 27.597.003 28.422.002

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company