Range of end feed copper or gunmetal solder fittings for use with copper pipe. Maximum working pressure 16.0 bar (Sizes 8 - 28mm). Maximum working pressure 10.0 bar (Sizes 35 - 108mm). Maximum operating temperature 100°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207803

Size:

8mm to 108mm

Marking:

Viega on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

Copper models: 95002A - elbow 90°, 95001A - elbow 90°, 95041 - elbow 45°, 95040 - elbow 45°, 95090 - elbow 90°, 95092 - elbow 90°, 95103 - T-piece, 95085 - crossover, 95086 - crossover, 95270 - coupling, 95240 - reducing coupling, 95243 - reducing, 95301 - cap. Gunmetal models: 94130G - T-piece, 94243G - adapter, 94472G - Wall plate, 94090G - adapter elbow 90°, 94280G - adapter, 94270G - adapter, 94246G - plug-in piece, 94092G - adapter elbow 90°, 94340 - screw fitting, 94471G - wall plate elbow, 94096G - adapter union elbow 90°, 94340G - adapter union.

Approval Holder:

Viega GmbH & Co. KG

Company Name

Viega GmbH & Co. KG

Address

Viega Platz 1 Attendorn

Postcode

57439

Country

Germany

Phone

+49 (2722) 61-5280

General Email

andre.quartier@viega.de

View All Listings by this Company

Range of copper end feed fittings for use with copper tube manufactured to EN1057 For above and below ground use. 5mm to 54mm = Maximum working pressure 25.0 bar. 67mm to 159mm = Maximum working pressure 16.0 bar. Maximum operating temperature 100°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2207337

Size:

see model

Marking:

K logo, standard & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

EENS – 90° Elbow 15mm code EENS015 22mm code EENS022 28mm code EENS028 35mm code EENS035 42mm code EENS042 54mm code EENS054 67mm code EENS067 76mm code EENS076 108mm code EENS108 159mm code EENS159 EEFS – 45° Elbow 15mm code EEFS015 22mm code EEFS022 28mm code EEFS028 35mm code EEFS035 42mm code EEFS042 54mm code EEFS054 67mm code EEFS067 76mm code EEFS076 108mm code EEFS108 159mm code EEFS159 REN – 90° Elbow-Reduction 22x15mm code REN02215 ECC – Straight Coupler 15mm code ECC015 22mm code ECC022 28mm code ECC028 35mm code ECC035 42mm code ECC042 54mm code ECC054 67mm code ECC067 76mm code ECC076 108mm code ECC108 159mm code ECC159 ENN – Fitting Reducer 22x15mm code ENN02215 28x15mm code ENN02815 28x22mm code ENN02822 35x15mm code ENN03515 35x22mm code ENN03522 35x28mm code ENN03528 42x22mm code ENN04222 42x28mm code ENN04228 42x35mm code ENN04235 54x22mm code ENN05422 54x28mm code ENN05428 54x35mm code ENN05435 54x42mm code ENN05442 67x28mm code ENN06728 67x35mm code ENN06735 67x42mm code ENN06742 67x54mm code ENN06754 76x42mm code ENN07642 76x54mm code ENN07654 76x67mm code ENN07667 108x54mm code ENN10854 108x67mm code ENN10867 108x76mm code ENN10876 159x76mm code ENN15976 159x108mm code ENN159108 EKK – Stop End 15mm code EKK015 22mm code EKK022 28mm code EKK028 35mm code EKK035 42mm code EKK042 54mm code EKK054 ERR – Reducer Coupler 22x15mm code ERR02215 28x15mm code ERR02815 28x22mm code ERR02822 35x15mm code ERR03515 35x22mm code ERR03522 35x28mm code ERR03528 42x22mm code ERR04222 42x28mm code ERR04228 42x35mm code ERR04235 54x22mm code ERR05422 54x28mm code ERR05428 54x35mm code ERR05435 54x42mm code ERR05442 67x28mm code ERR06728 67x35mm code ERR06735 67x42mm code ERR06742 67x54mm code ERR06754 76x35mm code ERR07635 76x42mm code ERR07642 76x54mm code ERR07654 76x67mm code ERR07667 108x42mm code ERR10842 108x54mm code ERR10854 108x67mm code ERR10867 108x76mm code ERR10876 159x76mm code ERR15976 159x108mm code ERR159108 ETE – Equal Tee 15mm code ETE015 22mm code ETE022 28mm code ETE028 35mm code ETE035 42mm code ETE042 54mm code ETE054 67mm code ETE067 76mm code ETE076 108mm code ETE108 159mm code ETE159 ETR-REB – Reduced End Tee 22x15x15mm code ETR0221515 28x22x22mm code ETR0282222 35x28x28mm code ETR0352828 ETR-RB – Reduced Branch Tee 22x22x15mm code ETR0222215 28x28x15mm code ETR0282815 28x28x22mm code ETR0282822 35x35x15mm code ETR0353515 35x35x22mm code ETR0353522 35x35x28mm code ETR0353528 42x42x15mm code ETR0424215 42x42x22mm code ETR0424222 42x42x28mm code ETR0424228 42x42x35mm code ETR0424235 54x54x15mm code ETR0545415 54x54x22mm code ETR0545422 54x54x28mm code ETR0545428 54x54x35mm code ETR0545435 54x54x42mm code ETR0545442 67x67x22mm code ETR0676722 67x67x28mm code ETR0676728 67x67x35mm code ETR0676735 67x67x42mm code ETR0676742 67x67x54mm code ETR0676754 76x76x22mm code ETR0767622 76x76x28mm code ETR0767628 76x76x35mm code ETR0767635 76x76x42mm code ETR0767642 76x76x54mm code ETR0767654 76x76x67mm code ETR0767667 108x108x28mm code ETR10810828 108x108x35mm code ETR10810835 108x108x42mm code ETR10810842 108x108x54mm code ETR10810854 108x108x67mm code ETR10810867 108x108x76mm code ETR10810876 159x159x54mm code ETR159159054 159x159x67mm code ETR159159067 159x159x76mm code ETR159159076 159x159x108mm code ETR159159108 ETR-RE – Reduced End Tee 22x15x22mm code ETR0221522 28x22x28mm code ETR0282228 ETR-BER – Reduced End Tee 15x15x22mm code ETR0151522 22x22x28mm code ETR0222228

Approval Holder:

Kembla (HK) Limited

Company Name

Kembla (HK) Limited

Country

China

Phone

+852 2833 9308

General Email

charles.tam@kembla.com.hk

View All Listings by this Company

Range of pressure limiter with stainless steel spring, plastic or chrome plated brass bodies. A5.0022.0 and A5.0027.0 incorporate with a stainless-steel mesh filter. Maximum working pressure 10.0 Bar. Maximum operating temperature 65˚C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2207328

Note:

Pressure limiting claims made by the manufacturer have not been verified by test.

Size:

see model

Marking:

A5.0006.0, A5.0014.0, A5.0022.0, A5.00229.0, A5.0027.0: Neoperl moulded on body of insert, Neoperl & direction flow arrow etched on body A5.0004.0, A5.0010.0, A5.0020.0, A5.0025.0: Neoperl moulded on body of insert

Installation Requirements:

R001

Expiry date:

31/07/2027

Model:

A5.0004.0 Pressure Limiter D 1bar insert - 18.57mm OD A5.0006.0 Pressure Limiter G1/2 1 bar - ½”BSP(F) x ½”BSP(M) A5.0010.0 Pressure Limiter 2 bar insert - 18.57mm OD A5.0014.0 Pressure Limiter D G1/2 2 bar - ½”BSP(F) x ½”BSP(M) A5.0020.0 Pressure Limiter DS 1 bar insert - 18.57mm OD A5.0022.0 Pressure Limiter DS G1/2 1 bar - ½”BSP(F) x ½”BSP(M) A5.0025.0 Pressure Limiter DS 2 bar insert - 18.57mm OD A5.0027.0 Pressure Limiter DS G1/2 2 bar - ½”BSP(F) x ½”BSP(M) A5.0029.0 Pressure Limiter DS G1/2 2 bar - OF - ½”BSP(F) x ½”BSP(M)

Approval Holder:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Manufacturer:

Neoperl GmbH

Company Name

Neoperl GmbH

Address

Klosterrunstrasse 9-11, Müllheim

Postcode

D-79379

Country

Germany

Phone

+49 7631 188 374

General Email

DE.Approvals@neoperl.com

View All Listings by this Company

Range of horizontal self-priming multistage pumps with stainless steel bodies, stainless steel impellers, shaft and outer sleeve. Maximum working pressure 10.0 Bar Maximum operating temperatures: EH Three phase models 85°C, EH Single phase models 55.0°C and EHsp models 35°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2104076

Size:

1 ¼” BSP (F) – 2” BSP (F)

Marking:

Stuart Turner, model number and other technical info on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/04/2026

Model:

HM 0302 230 M 50 HM 0303 230 M 50 HM 0304 230 M 50 HM 0305 230 M 50 HM 0306 230 M 50 HM 0307 230 M 50 HM 0308 230 M 50 HM 0309 230 M 50 HM 0302 230-400 T 50 HM 0303 230-400 T 50 HM 0304 230-400 T 50 HM 0305 230-400 T 50 HM 0306 230-400 T 50 HM 0307 230-400 T 50 HM 0308 230-400 T 50 HM 0309 23 0-400 T 50 HM 0502 230 M 50 HM 0503 230 M 50 HM 0504 230 M 50 HM 0505 230 M 50 HM 0506 230 M 50 HM 0507 230 M 50 HM 0508 230 M 50 HM 0509 230 M 50 HM 0502 230-400 T 50 HM 0503 230-400 T 50 HM 0504 230-400 T 50 HM 0505 230-400 T 50 HM 0506 230-400 T 50 HM 0507 230-400 T 50 HM 0508 230-400 T 50 HM 0509 23 0-400 T 50 HM 0902 230 M 50 HM 0903 230 M 50 HM 0904 230 M 50 HM 0905 230 M 50 HM 0906 230 M 50 HM 0907 230 M 50 HM 0902 230-400 T 50 HM 0903 230-400 T 50 HM 0904 230-400 T 50 HM 0905 230-400 T 50 HM 0906 230-400 T 50 HM 0907 230-400 T 50 HM 0908 23 0-400 T 50 HM 1502 230 M 50 HM 1503 230 M 50 HM 1502 230-400 T 50 HM 1503 230-400 T 50 HM 1504 230-400 T 50 HM 1505 230-400 T 50 HM 1506 230-400 T 50 HM 1507 23 0-400 T 50 HM 2002 230 M 50 HM 2002 230-400 T 50 HM 2003 230-400 T 50 HM 2004 230-400 T 50 HM 2005 230-400 T 50 Type code: HM XY Z L 50 HM: product name X: flow rate Y: number of impellers Z: motor voltage L: motor phase M=single phase; T=three phase 50: frequency

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

‘3ME’ Range of horizontal pumps with stainless steel bodies and impellers, and EPDM ‘O’-rings. The products are supplied with a carbon/ceramic/EPDM shaft seal. Maximum working pressure 10.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2206044

Size:

SUCTION FLANGE (TO DIN 2532): 32-125/160/200 models: DN50, 40-125/160/200 models: DN65, 50-125/160/200 models: DN65, 65-125/160/200 models: DN80. DISCHARGE FLANGE (TO DIN 2532): 32-125/160/200 models: DN32, 40-125/160/200 models: DN40, 50-125/160/200 models: DN50, 65-125/160/200 models: DN65.

Marking:

Ebara, model, CE and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

30/06/2027

Model:

3ME 32-125/1,1 M (Product code: 1300206600), 3ME 32-160/1,5 M (Product code: 1300206700), 3ME 32-160/2,2 M (Product code: 1300306600), 3ME 40-125/1,5 M (Product code: 1320376600), 3ME 40-125/2,2 M (Product code: 1320276600), 3ME 50-125/2,2 M (Product code: 1330506600), 3ME/I 32-125/1,1 IE3 (Product code: 1300206604I), 3ME/I 32-125/1,1 SCA IE3 (Product code: 1300206504I), 3ME/I 32-125/1,5 SCA IE3 (Product code: 1300206704I), 3ME/I 32-160/1,5 IE3 (Product code: 1300206804I), 3ME/I 32-160/1,5 IE3 SCA (Product code: 1300206904I), 3ME/I 32-160/2,2 IE3 (Product code: 1300306604I), 3ME/I 32-160/2,2 SCA IE3 (Product code: 1300306704I), 3ME/I 32-200/1,1 CARTER IE3 (Product code: 1300206104I), 3ME/I 32-200/1,5 CARTER IE3 (Product code: 1300206114I), 3ME/I 32-200/2,2 CARTER IE3 (Product code: 1300302604I), 3ME/I 32-200/3 IE3 (Product code: 1310406604I), 3ME/I 32-200/3 IE3 SCA (Product code: 1310409604I), 3ME/I 32-200/4 CARTER IE3 (Product code: 1310558704I), 3ME/I 32-200/4 IE3 (Product code: 1310556604I), 3ME/I 32-200/4 SCA (Product code: 1310556704I), 3ME/I 32-200/5,5 IE3 (Product code: 1310756606I), 3ME/I 32-200/5,5 SCA IE3 (Product code: 1310756706I), 3ME/I 32-200/7.5 IE3 (Product code: 1310906604I), 3ME/I 32-200/7.5 IE3 SCA (Product code: 1310906704I), 3ME/I 40-125/1,5 IE3 (Product code: 1320376604I), 3ME/I 40-125/1,5 SCA IE3 (Product code: 1320376704I), 3ME/I 40-125/2,2 IE3 (Product code: 1320276604I), 3ME/I 40-125/2,2 SCA IE3 (Product code: 1320276704I), 3ME/I 40-160/3 IE3 (Product code: 1320406604I), 3ME/I 40-160/3 SCA IE3 (Product code: 1320406704I), 3ME/I 40-160/4 IE3 (Product code: 1320556604I), 3ME/I 40-160/4 SCA IE3 (Product code: 1320556704I), 3ME/I 40-200/11 IE3 EN (Product code: 1330916606I), 3ME/I 40-200/11 SCA IE3 (Product code: 1330916706I), 3ME/I 40-200/3 CARTER IE3 (Product code: 1320402704I), 3ME/I 40-200/4 CARTER IE3 (Product code: 1320556504I), 3ME/I 40-200/5,5 IE3 EN (Product code: 1330756604I), 3ME/I 40-200/5,5 SCA IE3 (Product code: 1330756904I), 3ME/I 40-200/7,5 IE3 (Product code: 1330906604I), 3ME/I 40-200/7,5 SCA IE3 (Product code: 1330906704I), 3ME/I 50-125/2,2 IE3 (Product code: 1330506604I), 3ME/I 50-125/2,2 SCA IE3 (Product code: 1330506704I), ME/I 50-125/3 (126) (Product code: 6130002990:), 3ME/I 50-125/3 IE3 (Product code: 1330556604I), 3ME/I 50-125/3 SCA IE3(Product code: 1330556704I), 3ME/I 50-125/3R (D126) (Product code: 1330556404I), 3ME/I 50-125/4 IE3 (Product code: 1330406604I), 3ME/I 50-125/4 SCA IE3 (Product code: 1330406704I), 3ME/I 50-160/5,5 230/400_50 IE3 (Product code: 1330902504I), 3ME/I 50-160/5,5 IE3 EN (Product code: 1330906606I), 3ME/I 50-160/5,5 SCA IE3 (Product code: 1330906706I), 3ME/I 50-160/7,5 IE3 (Product code: 1330896606I), 3ME/I 50-160/7,5 R154 IE3 (Product code: 1330896806I), 3ME/I 50-160/7,5 SCA IE3 (Product code: 1330896706I), 3ME/I 50-200/11 IE3 (Product code: 1330966606I), 3ME/I 50-200/11 IE3 STAC (Product code: 1330964006I), 3ME/I 50-200/11 SCA IE3 (Product code: 1330966706I), 3ME/I 50-200/116 380-460/660SCA (Product code: 1330966716I), 3ME/I 50-200/15 IE3 (Product code: 1330986606I), 3ME/I 50-200/15 SCA IE3 (Product code: 1330986706I), 3ME/I 50-200/5,5 CARTER IE3 (Product code: 1330906106I), 3ME/I 50-200/7,5 CARTER IE3 (Product code: 1330890206I), 3ME/I 50-200/9,2 IE3 (Product code: 1330976606I), 3ME/I 50-200/9,2 SCA IE3 (Product code: 1330976706I), 3ME/I 65-125/4 IE3 (Product code: 1344126604I), 3ME/I 65-125/4 SCA IE3 (Product code: 1344126804I), 3ME/I 65-125/5,5 IE3 (Product code: 1344136604I), 3ME/I 65-125/5,5 SCA IE3 (Product code: 1344136704I), 3ME/I 65-125/5.5R (D128) (Product code: 1344136404I), 3ME/I 65-125/7,5 230/400_50 IE3 (Product code: 1344146606I), 3ME/I 65-125/7,5 IE3 (Product code: 1344146604I), 3ME/I 65-125/7,5 SCA IE3 (Product code: 1344146804I), 3ME/I 65-125/7.5R (D138) (Product code: 1344146404I), 3ME/I 65-160/11 IE3 (Product code: 1345166604I), 3ME/I 65-160/11 SCA (Product code: 1345166704I), 3ME/I 65-160/15 IE3 (Product code: 1345176604I), 3ME/I 65-160/15 IE3 (Product code: 1345176704I), 3ME/I 65-160/7,5 IE3 (Product code: 1345146604I), 3ME/I 65-160/7,5 SCA IE3 (Product code: 1345146704I), 3ME/I 65-160/9,2 IE3 (Product code: 1345156604I), 3ME/I 65-160/9,2 SCA IE3 (Product code: 1345156704I), 3ME/I 65-200/15 IE3 (Product code: 1346176604I), 3ME/I 65-200/15 SCA IE3 (Product code: 1346176704I), 3ME/I 65-200/18,5 IE3 (Product code: 1346186604I), 3ME/I 65-200/18,5 IE3 SCA (Product code: 1346186704I), 3ME/I 65-200/22 IE3 (Product code: 1346196604I), 3ME/I 65-200/22 IE3 STAC (Product code: 1346193904I), 3ME/I 65-200/22 SCA IE3 (Product code: 1346196704I).

Approval Holder:

Ebara Pumps Europe S.p.A.

Company Name

Ebara Pumps Europe S.p.A.

Address

Via Campo Sportivo, 30 – 38023 Cles (TN)

Country

Italy

Phone

0039 444 706 811

View All Listings by this Company

Range of shower arms, ceiling arms, water intakes and wall mounted outlet brackets with either chrome plated brass or stainless steel). Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2204087

Note:

Open outlet use only.

Marking:

CP HART on base plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2027

Model:

Wall mounted shower arms: CPHSP2138, ZCPHSP2138, CPHSP213830, ZCPHSP213830, CPHSP213845 , ZCPHSP213845, CPHSP2584, ZCPHSP2584, CPHSP2585, ZCPHSP2585, CPHSP2538, ZCPHSP2538, CPHSP2945, ZCPHSP2945, CPHSP2946, ZCPHSP2946, CPHSP2587 & ZCPHSP2587 Ceiling mounted shower arms: CPHSP2586 & ZCPHSP2586 Water Intakes: CPHSP2013, ZCPHSP2013, CPHSP2954 & ZCPHSP2954 Wall outlet CPHSP2172, ZCPHSP2172, CPHSP2287, ZCPHSP2287, CPHSP2951, ZCPHSP2951, CPHSP2438, ZCPHSP2438, CPHSP2690 & ZCPHSP2690

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

A range of shower kits and hand showers incorporating metal bodies (chrome plated). Some models are supplied with sliding rails, wall elbows and shower hoses (see models). Maximum working temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2112065

Note:

For open outlet use only

Size:

½” BSP (M)

Marking:

CP HART on handset.

Installation Requirements:

R001 R040

Expiry date:

31/12/2026

Model:

ZCPHSP2150 & CPHSP2150 - Sliding rail with double braided hose and brass hand shower ZCPHSP2953SS & CPHSP2953SS - Sliding metal hose and inox hand shower ZCPHSP22874 & CPHSP22874- Shower kit with wall outlet, PVC hose and abs hand shower ZCPHSP22874OT & CPHSP22874OT - Shower kit with water elbow, double braided hose and brass hand shower ZCPHSP29514SS & CPHSP29514SS - Shower kit with metal hose and inox hand shower ZCPHSP2956SS & CPHSP2956SS - Hand shower

Approval Holder:

C.P.Hart

Company Name

C.P.Hart

Address

Unit 40 Charles Park Claire Causeways Crossways Business Park Dartford

Postcode

DA2 6QA

Country

United Kingdom

General Email

roy.davis@cphart.co.uk

View All Listings by this Company

Range of overhead shower outlets with brass bodies (various finishes - see model). Model 27 390 xxx is ceiling mounted. Model 27 437 xxx is wall mounted. The inlet incorporates stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207709

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

27 390 xxx model: Hansgrohe on shower head body. 27 437 xxx model: Hansgrohe on rosette.

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

27 390 xxx Hansgrohe PuraVida (Overhead shower 400 1jet with ceiling connector), 27 437 xxx Hansgrohe PuraVida (Overhead shower 400 1jet with shower arm). Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of handshower holders with brass bodies (various finishes). The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2206319

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Kohler on body

Installation Requirements:

R001 R040

Expiry date:

30/06/2027

Model:

14791W-** LOURE® Where ** denotes finish and can be replaced with: 2BZ - Oil Rubbed Bronze, BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, FBG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, 2MB - Modern Brass.

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Beijing Kohler Ltd

Company Name

Beijing Kohler Ltd

Address

General Email

View All Listings by this Company

Range of shower heads with brass bodies (various finishes), incorporating EPDM ‘O’-rings and plastic flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2206348

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Kohler on face.

Installation Requirements:

R001 R040

Expiry date:

30/06/2027

Model:

Katalyst range: 13689W-** 13690W-** 13691W-** 14536W-** 13696W-** 13695W-** 13693W-** 13694W-** 13692W-** Where ‘**” denotes the surface finish and is replaced by: 2BZ - Oil Rubbed Bronze, BZ - Antique Bronze, SA - Antique Silver, 96 - Biscuit, 7 - Black, W7 - Black Nickel, LB - Bronze, G - Brushed Chrome, AG - Brushed Nickel, BS - Brushed Stainless, FGN - Chartreuse, FRD - Cherry Red, GN - Gunmetal, 2BL - Matte Black, YG - Matte Gold, FNY - Navy Blue, AD - Nickel Silver, R2B - Oil Rubbed Bronze-Gold, CP - Polished Chrome, 1CP - Polished Chrome, ABS PGD - Polished Gold, 24K - Polished Gold, S - Polished Stainless, AGP PVD - Brushed Nickel, 24P PVD - Polished Gold, ADP PVD - Silver Nickel, FBG - Retro Blue, RGD - Rose Gold, TB - Satin Black, SSL - Sterling Silver, TT - Titanium, ULB - Un-lacquered Brass, BV - Vibrant Brushed Bronze, BN - Vibrant Brushed Nickel, AF - Vibrant French Gold, BGD - Vibrant Modern Brushed Gold, PB - Vibrant Polished Brass, SN - Vibrant Polished Nickel, VS - Vibrant Stainless, VNT - Vintage Nickel, W6 - Weathered Bronze, 0 - White, 2MB - Modern Brass.

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of shower outlets with matte black finishes, consisting of a shower hose, handset, riser rail and a brass wall mounted inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205900

Note:

Open outlet use only.

Size:

1/2" BSP (M)

Marking:

Bristan on shower handset.

Installation Requirements:

R040

Expiry date:

31/05/2027

Model:

233687 & 233698

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of shower handsets (various finishes) incorporating stainless steel strainers. Model 28 588 xxx incorporates flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207710

Note:

Open outlet use only.

Size:

Stainless steel braided thermoplastic silicone rubber lined flexible hose assembly incorporating 3/8” BSP captive nut end connection.

Marking:

Hansgrohe on front base of shower handset.

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

28 587 xxx- Hansgrohe Raindance Select S Hand shower 150 3jet 28 588 xxx- Hansgrohe Raindance Select S Hand shower 150 3jet EcoSmart 9 l/min Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of showers handsets incorporating plastic bodies (chrome plated) Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205090

Note:

Open outlet use only

Size:

½” BSP (M)

Marking:

Methven or Deva on handle.

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

HANM09 showers handsets

Approval Holder:

Methven UK Limited

Company Name

Methven UK Limited

Address

Methven Experience Centre 3-3A Stone Cross Court Yew Tree Way Golborne Warrington

Postcode

WA3 3JE

Country

United Kingdom

Phone

0800 195 1602

General Email

raluca.olariu@uk.methven.com

View All Listings by this Company

Range of hand shower sets comprising of a wall mounted elbow, shower hose, shower handset and shower holder. The shower handset has a chrome plated plastic body and the inlet incorporates a stainless steel strainer and approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. The elbow incorporates a quarter turn ceramic disc headwork with dome type operating member and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207026

Size:

½” BSP (M)

Marking:

Dornbracht on shower handset

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

27809980 & 27809985

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of disposable shower kits, consisting of shower handset and shower hose with EPDM ‘O’-rings. Maximum operating temperature 65.0°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207910

Note:

Open outlet use only.

Size:

½” BSP (F) conical nuts

Marking:

DELABIE on shower handset

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

808B 808Y 809B 809Y Models added February 2026 809P 809G

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Wall mounted shower outlet with chrome plated body. The inlet incorporates a flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow prevention. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207320

Note:

Open outlet use only.

Size:

½” BSP (M)

Marking:

Schell on body

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

01.821 06 99

Approval Holder:

Schell GmbH & Co KG Armaturentechnologie

Company Name

Schell GmbH & Co KG Armaturentechnologie

Address

Raiffeisenstrasse 31 Olpe

Postcode

D-57462

Country

Germany

Phone

+492761892294

General Email

info@schell.eu

View All Listings by this Company

Range of shower outlets and shower arms (brass bodies - various finishes - see model). The wall mounted and ceiling mounted shower heads incorporate integral plastic flow regulators and also include stainless steel strainers on the inlets. The shower handset has a plastic flow regulator and a stainless steel strainer on the inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2207323

Note:

Open outlet use only. The 48 495 xxx & 48 496 xxx Ceiling arm extensions are not approved in their own right.

Size:

48 490 xxx, 48 491 xxx, 48 493 xxx, 48 495 xxx & 48 651 xxx models: ½” BSP (M). 48 492 xxx, 48 494 xxx & 48 496 xxx models: 13mm OD.

Marking:

AXOR (brand of Hansgrohe SE) on shower face.

Installation Requirements:

R001 R040

Expiry date:

31/07/2027

Model:

Wall mounted: 48 490 xxx Spot Shower 75, 1jet, wall arm, 48 491 xxx Overhead shower 280, 1jet, wall arm, 48 492 xxx Overhead shower 280, 2jet, wall arm. Ceiling mounted: 48 493 xxx Overhead shower 280, 1jet, ceiling arm, 48 494 xxx Overhead shower 280, 2 jet, ceiling arm, Ceiling arm extensions (which must be installed with one of the overhead showers): 48 495 xxx Ceiling arm extension, 48 496 xxx Ceiling arm extension. Shower handset: 48 651 xxx Hand shower,1jet. Models added June 2025: 30 357 4xx - AXOR One - Overhead shower 280 1jet for showerpipe, 33 357 4xx - AXOR One - Overhead shower 280 1jet EcoSmart for showerpipe. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2112066

Size:

See Model

Marking:

B&Q (brand of Kingfisher), size and PN10 on body

Installation Requirements:

R001 R511

Expiry date:

31/12/2026

Model:

EPH_VAL20_0049a Drain-Off Cock - (15mm Capillary), EPH_VAL20_0052a Drain-Off Cock - (1/2” BSP (M)),

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of drain taps incorporating brass bodies, EPDM seats and washers and a non-rising spindle headwork. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1770 Taps

Section Subtitle:

Draining, for above ground use only.

WRAS Approval Number:

2112067

Size:

See Model

Marking:

SF (Brand of Kingfisher), size and PN10 on body

Installation Requirements:

R001 R511

Expiry date:

31/12/2026

Model:

EPH_VAL20_0049b Drain-Off Cock - Type A (15mm Capillary), EPH_VAL20_0051 Drain-Off Cock - Type A, (22mm Capillary), EPH_VAL20_0052b Drain-Off Cock - Type A, (1/2” BSP (M)), EPH_VAL20_0054b Drain-Off Cock - Type A (15mm Spigot).

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of pillar taps (chrome plated brass) with quarter turn ceramic disc headworks and single lever operating members. The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2206908

Size:

½” BSP (M)

Marking:

Bristan on the indice

Installation Requirements:

R001 R006

Expiry date:

30/06/2027

Model:

RS2 1/2 C RS2 VAN C 225913 225917

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company