Range of copper end feed fittings for use with copper tube to EN 1057. For above and below ground use. Maximum working pressure: 6mm-54mm 16.0bar, 64mm-108mm 10.0bar. Maximum operating temperature 85°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250108002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Manufactures logo & size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

5001: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5002: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm，64mm，67mm，76mm，89mm，108mm 5040: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5041: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5090: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5092: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5085: 12mm，14mm，15mm，16mm，18mm，22mm 5086: 12mm，14mm，15mm，16mm，18mm，22mm 5270: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5301: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，22mm，28mm，35mm，42mm， 45mm, 64mm，67mm，76mm，89mm，108mm 5240: 8mm x 6mm ， 10mm x 6mm ， 10mm x 8mm ， 12mm x 6mm ， 12mm x 8mm ， 12mm x 10mm ， 14mm x 10mm ， 14mm x 12mm ， 15mm x 8mm ， 15mm x 10mm，15mm x 12mm，15mm x 14mm， 16mm x 10mm，16mm x 12mm，16mm x 14mm， 16mm x 15mm，18mm x 10mm，18mm x 12mm， 18mm x 14mm，18mm x 15mm，18mm x 16mm， 20mm x 10mm，20mm x 12mm，20mm x 14mm， 20mm x 15mm，20mm x 16mm，20mm x 18mm， 22mm x 10mm，22mm x 12mm，22mm x 14mm， 22mm x 15mm，22mm x 16mm，22mm x 18mm， 22mm x 20mm，25mm x 22mm，28mm x 10mm， 28mm x 12mm，28mm x 14mm，28mm x 15mm， 28mm x 16mm，28mm x 18mm，28mm x 20mm， 28mm x 22mm，32mm x 16mm，32mm x 18mm， 32mm x 20mm，32mm x 22mm，32mm x 28mm， 35mm x 12mm，35mm x 15mm，35mm x 18mm， 35mm x 22mm，35mm x 28mm，36mm x 22mm， 36mm x 28mm，36mm x 32mm，36mm x 35mm， 40mm x 22mm，40mm x 28mm，40mm x 32mm， 40mm x 36mm，42mm x 15mm，42mm x 18mm， 42mm x 22mm，42mm x 28mm，42mm x 32mm， 42mm x 35mm，42mm x 36mm，52mm x 32mm， 52mm x 36mm，52mm x 40mm，52mm x 42mm， 54mm x 15mm，54mm x 22mm，54mm x 28mm， 54mm x 35mm，54mm x 42mm，54mm x 52mm 64mm x 35mm，64mm x 42mm，64mm x 54mm， 67mm x 28mm，67mm x 35mm，67mm x 42mm， 67mm x 54mm，76mm x 28mm，76mm x 35mm， 76mm x 42mm，76mm x 54mm，76mm x 64mm， 89mm x 54mm，89mm x 64mm，89mm x 76mm， 108mm x 54mm, 108mm x 64mm, 108mm x 76mm，108mm x 89mm 5243: 8mm x 6mm ， 10mm x 6mm ， 10mm x 8mm ， 12mm x 6mm ， 12mm x 8mm ， 12mm x 10mm ， 14mm x 10mm ， 14mm x 12mm ， 15mm x 8mm ， 15mm x 10mm，15mm x 12mm，15mm x 14mm， 16mm x 10mm，16mm x 12mm，16mm x 14mm， 16mm x 15mm，18mm x 10mm，18mm x 12mm， 18mm x 14mm，18mm x 15mm，18mm x 16mm， 20mm x 10mm，20mm x 12mm，20mm x 14mm， 20mm x 16mm，20mm x 18mm，22mm x 10mm， 22mm x 12mm，22mm x 14mm，22mm x 15mm， 22mm x 16mm，22mm x 18mm，22mm x 20mm， 25mm x 12mm，25mm x 14mm，25mm x 16mm， 25mm x 18mm，25mm x 22mm，28mm x 10mm， 28mm x 12mm，28mm x 14mm，28mm x 15mm， 28mm x 16mm，28mm x 18mm，28mm x 20mm， 28mm x 22mm，32mm x 18mm，32mm x 20mm， 32mm x 22mm，32mm x 28mm，35mm x 12mm， 35mm x 15mm，35mm x 18mm，35mm x 22mm， 35mm x 28mm，36mm x 18mm，36mm x 22mm， 36mm x28mm，36mm x 32mm，36mm x 35mm， 40mm x 22mm，40mm x 28mm，40mm x 32mm， 40mm x 35mm，40mm x 36mm，42mm x 15mm， 42mm x 18mm，42mm x 22mm，42mm x 28mm， 42mm x 32mm，42mm x 35mm，42mm x 36mm， 42mm x 40mm，52mm x 28mm，52mm x 32mm， 52mm x 35mm，52mm x 36mm，52mm x 40mm， 52mm x42mm，54mm x 15mm，54mm x 18mm， 54mm x 22mm，54mm x 28mm，54mm x 32mm， 54mm x 35mm，54mm x 36mm，54mm x 40mm， 54mm x 42mm，54mm x 52mm, 64mm x 35mm，64mm x 42mm，64mm x 54mm， 67mm x 28mm，67mm x 35mm，67mm x 42mm， 67mm x 54mm，76mm x 28mm，76mm x 35mm， 76mm x 42mm，76mm x 54mm，76mm x 64mm， 89mm x 54mm，89mm x 64mm，89mm x 76mm， 108mm x 54mm，108mm x 64mm， 108mm x 76mm，108mm x 89mm 5130: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm, 64mm，67mm，76mm，89mm，108mm 5130R: 6mm x 8mm x 6mm，8mm x 6mm x 6mm ， 8mm x 6mm x 8mm，8mm x 10mm x 8mm， 10mm x 8mm x 6mm ， 10mm x 6mm x 10mm ， 10mm x 8mm x 8mm ， 10mm x 8mm x 10mm ，10mm x 10mm x 8mm ， 10mm x 12mm x 10mm ， 10mm x 15mm x 10mm ， 12mm x 8mm x 8mm ， 12mm x 8mm x 10mm ， 12mm x 8mm x 12mm ， 12mm x 10mm x 8mm ， 12mm x 10mm x 10mm ， 12mm x 10mm x 12mm ， 12mm x 12mm x 8mm ， 12mm x 12mm x 10mm，12mm x 14mm x 12mm， 12mm x 15mm x 12mm，12mm x 16mm x 12mm， 12mm x 18mm x 12mm，14mm x 10mm x 10mm， 14mm x 10mm x 12mm，14mm x 10mm x 14mm， 14mm x 12mm x 10mm，14mm x 12mm x 12mm， 14mm x 12mm x 14mm，14mm x 14mm x 10mm， 14mm x 14mm x 12mm，14mm x 16mm x 12mm， 14mm x 16mm x 14mm，14mm x 18mm x 12mm， 14mm x 18mm x 14mm，14mm x 22mm x 14mm， 15mm x 8mm x 10mm ， 15mm x 8mm x 12mm ， 15mm x 10mm x 10mm，15mm x 10mm x 12mm， 15mm x 12mm x 10mm，15mm x 12mm x 12mm， 15mm x 15mm x 10mm，15mm x 15mm x 12mm， 15mm x 18mm x 12mm，15mm x 18mm x 15mm， 15mm x 22mm x 15mm，15mm x 28mm x 15mm， 16mm x 10mm x 16mm，16mm x 12mm x 12mm， 16mm x 12mm x 14mm，16mm x 12mm x 16mm， 16mm x 14mm x 12mm，16mm x 14mm x 14mm， 16mm x 14mm x 16mm，16mm x 16mm x 10mm， 16mm x 16mm x 12mm，16mm x 16mm x 14mm， 16mm x 18mm x 14mm，16mm x 18mm x 16mm， 16mm x 20mm x 16mm，16mm x 22mm x 16mm， 18mm x 10mm x 10mm，18mm x 10mm x 12mm， 18mm x 10mm x 15mm，18mm x 10mm x 18mm， 18mm x 12mm x 12mm，18mm x 12mm x 14mm， 18mm x 12mm x 15mm，18mm x 12mm x 16mm， 18mm x 12mm x 18mm，18mm x 14mm x 12mm， 18mm x 14mm x 14mm，18mm x 14mm x 16mm， 18mm x 14mm x 18mm，18mm x 15mm x 12mm， 18mm x 15mm x 15mm，18mm x 15mm x 18mm， 18mm x 16mm x 12mm，18mm x 16mm x 14mm， 18mm x 16mm x 16mm，18mm x 16mm x 18mm， 18mm x 18mm x 10mm，18mm x 18mm x 12mm， 18mm x 18mm x 14mm，18mm x 18mm x 15mm， 18mm x 18mm x 16mm，18mm x 20mm x 18mm， 18mm x 22mm x 14mm，18mm x 22mm x 15mm， 18mm x 22mm x 18mm，18mm x 28mm x 18mm， 20mm x 12mm x 20mm，20mm x 14mm x 18mm， 20mm x 14mm x 20mm，20mm x 16mm x 16mm， 20mm x 16mm x 18mm，20mm x 16mm x 20mm， 20mm x 18mm x 16mm，20mm x 18mm x 18mm， 20mm x 18mm x 20mm，20mm x 20mm x 12mm， 20mm x 20mm x 14mm，20mm x 20mm x 16mm， 20mm x 20mm x 18mm，20mm x 22mm x 20mm， 22mm x 10mm x 22mm，22mm x 12mm x 12mm， 22mm x 12mm x 14mm，22mm x 12mm x 15mm， 22mm x 12mm x 18mm，22mm x 12mm x 22mm， 22mm x 14mm x 12mm，22mm x 14mm x 14mm， 22mm x 14mm x 15mm，22mm x 14mm x 16mm， 22mm x 14mm x 18mm，22mm x 14mm x 22mm， 22mm x 15mm x 12mm，22mm x 15mm x 15mm， 22mm x 15mm x 18mm，22mm x 15mm x 22mm， 22mm x 16mm x 14mm，22mm x 16mm x 16mm， 22mm x 16mm x 18mm，22mm x 16mm x 22mm， 22mm x 18mm x 12mm，22mm x 18mm x 14mm， 22mm x 18mm x 15mm，22mm x 18mm x 16mm， 22mm x 18mm x 18mm，22mm x 18mm x 22mm， 22mm x 20mm x 22mm ，22mm x 22mm x10mm ， 22mm x 22mm x 12mm，22mm x 22mm x 14mm， 22mm x 22mm x 15mm，22mm x 22mm x 16mm， 22mm x 22mm x 18mm，22mm x 22mm x 20mm， 22mm x 28mm x 15mm，22mm x 28mm x 22mm， 22mm x 35mm x 22mm，28mm x 10mm x 28mm， 28mm x 12mm x 12mm，28mm x 12mm x 15mm， 28mm x 12mm x 18mm ，28mm x 12mm x22mm ， 28mm x 12mm x 28mm，28mm x 14mm x 18mm， 28mm x 14mm x 28mm，28mm x 15mm x 12mm， 28mm x 15mm x 15mm，28mm x 15mm x 18mm， 28mm x 15mm x 22mm，28mm x 15mm x 28mm， 28mm x 16mm x 15mm，28mm x 16mm x 16mm， 28mm x 16mm x 18mm，28mm x 16mm x 22mm， 28mm x 16mm x 28mm，28mm x 18mm x 12mm， 28mm x 18mm x 15mm，28mm x 18mm x 16mm， 28mm x 18mm x 18mm，28mm x 18mm x 22mm， 28mm x 18mm x 28mm，28mm x 20mm x 20mm， 28mm x 20mm x 28mm，28mm x 22mm x 12mm， 28mm x 22mm x 15mm，28mm x 22mm x 16mm， 28mm x 22mm x 18mm，28mm x 22mm x 22mm， 28mm x 22mm x 28mm，28mm x 28mm x 12mm， 28mm x 28mm x 14mm，28mm x 28mm x 15mm， 28mm x 28mm x 16mm，28mm x 28mm x 18mm， 28mm x 28mm x 22mm，28mm x 42mm x 28mm， 35mm x 12mm x 35mm，35mm x 15mm x 15mm， 35mm x 15mm x 22mm，35mm x 15mm x 28mm， 35mm x 15mm x 35mm，35mm x 18mm x 22mm， 35mm x 18mm x 28mm，35mm x 18mm x 35mm， 35mm x 22mm x 15mm，35mm x 22mm x 18mm， 35mm x 22mm x 22mm，35mm x 22mm x 28mm， 35mm x 22mm x 35mm，35mm x 28mm x 15mm， 35mm x 28mm x 18mm，35mm x 28mm x 22mm， 35mm x 28mm x 28mm，35mm x 28mm x 35mm， 35mm x 35mm x 15mm，35mm x 35mm x 18mm， 35mm x 35mm x 22mm，35mm x 35mm x 28mm， 35mm x 42mm x 35mm，42mm x 14mm x 42mm， 42mm x 15mm x 42mm，42mm x 18mm x 42mm， 42mm x 22mm x 35mm，42mm x 22mm x 42mm， 42mm x 28mm x 22mm，42mm x 28mm x 28mm， 42mm x 28mm x 35mm，42mm x 28mm x 42mm， 42mm x 35mm x 28mm，42mm x 35mm x 35mm， 42mm x 35mm x 42mm，42mm x 42mm x 22mm， 42mm x 42mm x 28mm，42mm x 42mm x 35mm， 42mm x 54mm x 42mm，52mm x 28mm x 52mm， 52mm x 32mm x 52mm，54mm x 15mm x 54mm， 54mm x 18mm x 54mm，54mm x 22mm x 42mm， 54mm x 22mm x 54mm，54mm x 28mm x 42mm， 54mm x 28mm x 54mm，54mm x 35mm x 35mm， 54mm x 35mm x 42mm，54mm x 35mm x 54mm， 54mm x 42mm x 42mm ，54mm x42mm x 54mm ， 54mm x 54mm x 22mm，54mm x 54mm x 28mm， 54mm x 54mm x 35mm，54mm x 54mm x 42mm， 64mm x 35mm x 64mm，64mm x 42mm x 64mm， 64mm x 54mm x 64mm，67mm x 28mm x 67mm， 67mm x 35mm x 67mm，67mm x 42mm x 67mm， 67mm x 54mm x 67mm，76mm x 28mm x 76mm， 76mm x 35mm x 76mm，76mm x 42mm x 76mm， 76mm x 54mm x 76mm，76mm x 64mm x 76mm， 89mm x 54mm x 89mm，89mm x 64mm x 89mm， 89mm x 76mm x 89mm，108mm x 35mm x 108mm， 108mm x 54mm x 108mm， 108mm x 64mm x 108mm， 108mm x 76mm x 108mm， 108mm x 89mm x 108mm 5060: 10mm，12mm，14mm，15mm，16mm，18mm， 22mm，28mm，35mm，42mm，54mm 5062: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，18mm x 1/2"，12mm x 3/4''， 14mm x 3/4''，15mm x 3/4''，16mm x 3/4''， 18mm x 3/4''，22mm x 3/4''，18mm x 1''， 22mm x 1''，28mm x 11/4''，54mm x 2'' 5063: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，15mm x 3/4''，16mm x 3/4''， 18mm x 3/4''，22mm x 3/4''，22mm x 1'' 5064: 12mm x 3/8"，10mm x 1/2"，12mm x 1/2"， 14mm x 1/2"，15mm x 1/2"，16mm x 1/2"， 18mm x 1/2"，12mm x 3/4''，14mm x 3/4''， 15mm x 3/4''，16mm x 3/4''，18mm x 3/4''， 22mm x 3/4''，18mm x 1''，22mm x 1''， 22mm x 11/4''，28mm x 11/4''，54mm x 2'' 5065: 12mm x 1/2"，14mm x 1/2"，15mm x 1/2"， 16mm x 1/2"，16mm x 3/4''，18mm x 3/4''， 22mm x 3/4''，22mm x 1'' 5270S: 6mm ， 8mm ， 10mm ， 12mm ， 14mm ， 15mm ， 16mm，18mm，20mm，22mm，25mm，28mm， 32mm，35mm，36mm，40mm，42mm，52mm， 54mm 5090R: 15mm x 12mm，22mm x 12mm，22mm x 15mm， 22mm x 18mm，28mm x 15mm，28mm x 12mm， 5180: 15mm，18mm，22mm 5270M: 15mm x 1/2''，22mm x 3/4"，28mm x 1"， 35mm x 11/4''，42mm x 11/2"

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

Room 902, No.185-1 Wenxue Road, Jiazhi Street, Jiaojiang, Taizhou, Zhejiang

Postcode

31800

Country

China

General Email

info@double‐winners.com

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

General Email

View All Listings by this Company

Shower wastewater heat recovery units with a copper body and twin wall separation. Maximum working pressure 10.0 Bar. Maximum operating temperature 45°C.

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

RECOUP on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

RECOUP heat deck

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of electromagnetic water meters with stainless steel bodies and natural rubber liners. Maximum working pressure 10.0 Bar Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40-DN300 flanged.

Marking:

Shanghai Kent Instrument logo, size, model code, serial number and other technical data on adhesive label. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

KEFD DN40, KEFD DN50, KEFD DN65, KEFD DN80, KEFD DN100, KEFD DN150, KEFD DN200, KEFD DN250, KEFD DN300.

Manufacturer:

Shanghai Kent Instrument Co., Ltd.

Company Name

Shanghai Kent Instrument Co., Ltd.

Address

169 #, Kangfa Rd., Tinglin Town, Jinshan District, Shanghai

View All Listings by this Company

Range of in-line single jet water meters with brass bodies. Products incorporate plastic strainers. Maximum working pressure: 16.0 Bar. Maximum operating temperature: 85.0°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN15 Models: 1/2” BSP (M) DN20 Model: 3/4” BSP (M).

Marking:

Flow arrow on body. BMETERS, serial number and other technical info on meter face.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

HYDRODIGIT-S1 DN15 Length: 80mm, 110mm, 145mm, 165mm. DN20 Length: 130mm, 190mm.

Manufacturer:

B Meters S.r.l

Company Name

B Meters S.r.l

Address

Via Friuli 3 33050 Gonars (UD) Italy

View All Listings by this Company

Range of ultrasonic water meters with brass bodies. The products incorporate a motorised butterfly valve on the outlet. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M)X(M) (DN15), 1” BSP (M)X(M) (DN20) and 1¼”BSP (M)X(M) (DN25).

Marking:

Huizhong Instrumentation Co., Ltd logo, Huizhong Instrumentation Co., Ltd, model (SCL-61HF-100), DN, manufacturing date (YYYYMM) and other technical information on meter face.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

SCL-61HF-100.

Approval Holder:

Huizhong Instrumentation Co., Ltd.

Company Name

Huizhong Instrumentation Co., Ltd.

Address

No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province

Country

China

View All Listings by this Company

Manufacturer:

Huizhong Instrumentation Co., Ltd.

Company Name

Huizhong Instrumentation Co., Ltd.

Address

No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province

Country

China

View All Listings by this Company

Range of in-line water meters with brass or plastic bodies. Models with a minimum length of 130mm and a maximum operating temperature of 50°C are supplied with an optional, non-return valve to be fitted by the installer (not suitable for backflow protection). Maximum working pressure 16.0 bar. The meters can be supplied with a maximum operating temperature of 50°C or 70°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) & 1” BSP (M).

Marking:

Landis+Gyr on water meter cover.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

WM1 ULTRAWATER W370 & WM1 ULTRAWATER W270 ranges.

Approval Holder:

Landis + Gyr Gmbh

Company Name

Landis + Gyr Gmbh

Address

Humboldtstr. 64, D-90459, Nuremberg

Country

Germany.

View All Listings by this Company

Water meter manifold with a gunmetal body. The product incorporates a non-return valve (not suitable for backflow protection) and a spherical valve on the inlet. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1" BSP (F) x 1” BSP (F).

Marking:

WATERFIT, Waterfit logo, flow arrow and size on body. CR on crutch head and cap.

Installation Requirements:

R001

Expiry date:

28/02/2030

Model:

SACAXX004038

Manufacturer:

Waterfit Ltd

Company Name

Waterfit Ltd

Address

PO Box 28 293 Birmingham New Road Dudley

Postcode

DY1 4SJ

Country

West Midlands

Phone

0121 5207987

View All Listings by this Company

Range of flow sensors with plastic bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN6 (½” BSP M), DN8 (½” BSP M), DN10 (¾” BSP M), DN15 (¾” BSP M), DN20, (1” BSP M) & DN25 (1¼” BSP M).

Marking:

Huba control, model code, connection size, date of manufacture (DD/MM/YY) and other technical data on face of body. Flow arrow and DN on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

Vortex Flow Sensor Type 240.

Manufacturer:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Mixing valve incorporating a brass body and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure10.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) captive nut

Marking:

Presto on body

Installation Requirements:

R001 R008 R010

Expiry date:

31/01/2030

Model:

29424 MIXER G1/2

Manufacturer:

Les Robinets Presto S.A

Company Name

Les Robinets Presto S.A

Address

4 Rue Lavoiser St. Georges De Didonne

Postcode

17110

Country

France

Phone

+33 546 053 452

View All Listings by this Company

Range of click type, pop-up wastes with metal bodies. Maximum operating temperature 60.0°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241002704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ¼” BSP (M)

Marking:

Vinzia Fratelli logo, EN274, NF logo and date of manufacturer (DDD/YY)

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

04, 05, 06 family types. Code example: 00 AA 00 00 00 00 AA(A). Made up of the below. TYPE OF WASTE (2 numbers) 04 - Waste Simple-Rapid with waste drains H60 – 75 – 100 05 - Waste Simple-Rapid with waste drains 06 - Waste free flow with all waste drains CAP (2 letters) AA - TA209 AB - TA204 AC - CO032 + TA406 (in this case the first two numbers are”04 or 05”) or TA200 + TA413 in this case the first two numbers are”06”) BA – TA191 BC – TA193 (in this case the first two number as “05”) or TA198 (in this case the first two number are”06”) BD – TA197 BE – TA195 BH – TA201 CA - TA6 + TA217 / TA229 (in this case the first two numbers are”04 or 05”) or TA6 + PA001 in this case the first two numbers are”06”) WASTE DRAIN (2 numbers) 01 - PI096 02 - PI087 03 - PI088 07 - PI096/STP 08 - PI110/STP 09 - PI088/STP 11 - PI082 19 - PI084/1STP 20 - PI084/1 21 - PI082/STP 24 - PI083 25 - PI083/STP 50 - PI099 51 – PI209 52 – PI210 62 – PI207 85 – PI010 BASE (2 numbers) 01 - RA095 02 - RA096 07 - CO110 16 - RA014 17 - RA009 50 - RA094 51 - RA100 54 - RA002 VARIANTS (2 numbers) 00 - STANDARD COMPONENTS PACKAGING (2 numbers) 00 - STANDARD PACKAGING FINISH (2 or 3 letters) CR - CHROME PLATED (these two letters are always compiled) + None - ME235-AB or no mechanism (for free flow ones) CRG - ME238

Approval Holder:

VINZIA Fratelli S.p.A.

Company Name

VINZIA Fratelli S.p.A.

Address

Via Borgomanero, 121 Briga Novarese (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 94847

General Email

gianfranco.calzoni@vinzia.com

View All Listings by this Company

Range of cold-water supply booster sets, incorporating a stainless-steel manifold system and between 1 and 3 pumps. The booster sets also incorporate spherical valves, non-return valves (not suitable for backflow protection), pressure switches/sensors and expansion vessels. Maximum working pressure: 16.0 Bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250702701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Inlet: 1” BSP, 1 ¼” BSP, 1 ½” BSP, 2” BSP, 2 ½” BSP, 3” BSP & DN100 (flanged). Outlet: 1” BSP, 1 ¼” BSP, 1 ½” BSP, 2” BSP, 2 ½” BSP, 3” BSP, DN80 (flanged) & DN100 (flanged).

Marking:

LOWARA, Model name and product information on adhesive label on control panel

Installation Requirements:

R001 R415

Expiry date:

31/07/2030

Model:

SMB / VV / YYYYYYYYYYYY / W / XX / ZZZ SMB - Series of booster - Variable speed Drive SM VV- Number of pumps installed: 10=1 PUMP 20=2 PUMPS 30=3 PUMPS YYYYYYYYYYY -Type of pumps installed: from 1SVE up to 22SVE from 1HME up to 15HME W - Main voltage supply 4=3*400Vac 2=1*230Vac 3=3*230Vac XX - Option CP=free voltage contacts ZZZ - Option PMA=pressure switch on suction

Manufacturer:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 4.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102721

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

ESPH XXS-XX\XX 1.XX:Rated flow(m³/h),range:2、3、4、8、10、12、16、20m³/h 2.XX:Impeller progession (1,2,3,4,5,6,7)*5 3.xx:Small Impeller (1) 4.End connection mode and size Rated flow(2、3m³ /h) :G1"XG1" Rated flow(4m³ /h) :G1¼"XG1" Rated flow(8、10、12m³ /h) :G1½"XG1½" Rated flow(16、20m³ /h) :G2"XG2"

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MULTI VSXXX-XX-(1/2/C/D/2C/2D/C-D) -(F/N) -E 1. XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2. XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4. F/N: the materials of wetted parts --N，material is SUS 316. --F，material is SUS 304. 5. E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

TPF on cover. TPF, model & technical information on data label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

TPVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2 ， On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 THM(-3)XX-XX\XX-SE 1. -3: different phase. -- -3: three phase，none: single phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、 16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Approval Holder:

TADMUR PUMP FACTORY WLL

Company Name

TADMUR PUMP FACTORY WLL

Address

P.O. BOX 212023 DOHA

Country

Qatar

View All Listings by this Company

Range of shower handsets with plastic bodies incorporating an integral filter. The inlet incorporates a combined washer and a strainer, plastic flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250102030

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP male.

Marking:

T Safe A/S logo on face of hand shower.

Installation Requirements:

R001 R040

Expiry date:

31/01/2030

Model:

02-803102, 02-803103, 02-803112, 02-803121, 02-803125, 02-803310, 02-803320, 02-803330, 02-803311, 02-803321, 02-803331, 02-803332, 02-803333.

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of (chrome plated) plastic shower handsets, each supplied with five (optional) plastic flow regulators (x2 blue, light green, dark green and grey). Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250115012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Solex on body.

Installation Requirements:

R001 R040

Expiry date:

31/01/2030

Model:

P91100, P91101, P77600. Models added May 2025: P91200, P91201, P91202, P91203.

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Chrome plated plastic shower handset incorporating a flow regulator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241003025

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½’’ BSP (M)

Marking:

Bristan on Handset

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

HAND21 BLK (black) HAND21 BB (brushed brass

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of overhead showers with plastic body (various finishes). Overhead shower inlets incorporate a stainless steel strainer Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2110398

Note:

Open outlet use only.

Size:

Overhead showers – ½” BSP (F) Shower Handsets – ½” BSP (M)

Marking:

Bristan on handle on shower handsets

Installation Requirements:

R001 R040

Expiry date:

31/10/2026

Model:

HAND201 C HAND201 BLK HAND201 BB

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Shower outlet kit, consisting of chromium plated ABS shower handset and PVC lined shower hose. The kit is also supplied with a riser rail and handset retainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240903017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

BRISTAN on the Handset

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

HAND22 BLK (black) HAND22 BB (brushed brass)

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of In-line ‘Y’ patterned strainer with ductile iron bodies (blue epoxy powder coated) and stainless-steel screens. Maximum working pressure 16.0 bar. Maximum operating temperature 85ºC.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40-DN300 Flanged.

Marking:

GEMAK, size, PN and WRAS on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

IV012

Approval Holder:

GEMAK SOTIRAS ANGELOS

Company Name

GEMAK SOTIRAS ANGELOS

Address

Esperidon str. 57013 Thessaloniki

Postcode

Greece

View All Listings by this Company