Range of brass fittings with compression connections to be used with copper pipes EN 1057. For above ground use only. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.
Range of brass fittings with compression connections to be used with copper pipes EN 1057. For above ground use only. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.
Range of brass compression fittings for use with copper pipes and Irish copper pipe (both manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperatures: 32612, 32634, 32712 & 32734 models: 65°C. All other models: 85°C.
Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of single and dual flush WC outlet valves. The valves incorporate an internal overflow and are operated with one push button (single flush) or two push buttons (dual flush). Cold water use only.
‘Zip Aquapoint IV’ range of wall mounted directly heated unvented storage vessels (cased and insulated) incorporating an enamel lined cylinder and safety kit. The cylinder is factory fitted with a temperature and pressure relief valve (7.0 bar/90°C) and a drain valve. The product is supplied with an installation kit comprising of an expansion vessel, tundish and an inlet manifold incorporating a 6.0 bar expansion relief valve, an adjustable pressure reducing valve with stainless-steel strainer (adjustable between 2.7 and 3.3 bar, but pre-set at 3.0 bar), and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). The compression connections of the installation kit are for use with copper pipe (Manufactured to EN 1057). Maximum working pressure 5.5 bar. Maximum operating temperature 70°C. Cold supply only.
Ranges of sensor operated flow control devices either mains or battery powered, incorporating a normally closed solenoid valve to control the flow and operated via an infra-red sensor. The inlet incorporates a stainless-steel strainer. Maximum working pressure 8 Bar Maximum operating temperature 65°C
Brass pressure test point. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of ‘Tcontrols’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C
Plastic turbine for insertion into specifically dimensioned flow meters. Maximum operating temperature 85°C. Open outlet use only.
Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C
Permanent magnet multi-stage centrifugal pump with a plastic body. The product is supplied with brass adaptors and a copper olive to convert to compression. The compression connections are for use with Irish copper pipe (manufactured to EN1057) (27.4mm size) and copper pipe (manufactured to EN1057) (28mm size). Maximum working pressure 8.0 bar. Maximum operating temperature 90°C.
Range of single and twin ended shower booster pumps with plastic bodies and plastic impellers. The inlets/outlets incorporate stainless steel braided EPDM lined flexible hose assemblies with isolation valves and stainless-steel strainers. The outlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The Universal Twin models incorporate an expansion vessel. Maximum working pressure 1.5, 1.8, 2.0, 2.5, 2.6, 3.0 Bar (see model for more details). Maximum operating temperature: 60.0°C.
Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.
STORMBOOST range of domestic water pressure booster pumps with brass impellors, brass bodies with accumulators, available from 60 – 300 litres (please refer to model). Models are supplied with reducing bushes, pressure gauges, pressure reducing valves and double check valve assemblies housed in DZR brass bodies with isolation valves and strainers. Maximum working pressure 4.5 bar. Maximum operating temperature 23°C.
Range of wall mounted shower shower heads (chrome plated brass) bodies. Maximum operating temperature 85°C. Open outlet use only.
Range of shower handsets with various plated plastic bodies. The product incorporates a stainless-steel sieve a flow regulator. Maximum working pressure: open outlet use only. Maximum operating temperature: 60.0°C
Range of overhead shower outlets having plastic bodies (various finishes). The inlet incorporates a stainless-steel strainer and plastic flow regulators. Open outlet use only. Maximum operating temperature: 60.0°C.
Overhead shower outlets incorporating chrome plated plastic body. Stainless steel mesh strainer and a flow regulator (see models) in inlet connection. Open outlet use only Maximum operating temperature 75°C.
Range of chrome plated plastic shower handsets. Maximum operating temperature: 65°C Open outlet use only.
Page 350 of 391
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
