Range of copper crimped fittings with EPDM ‘O’-rings for use with copper pipe manufactured to EN1057. For above and below ground use. Maximum working pressure 16 Bar. Maximum operating temperature 99°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240902084

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See Models

Marking:

Brymec and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

27800 15mm Copper-Press 90° M/F Bend 27801 22mm Copper-Press 90° M/F Bend 27802 28mm Copper-Press 90° M/F Bend 27803 35mm Copper-Press 90° M/F Bend 27804 42mm Copper-Press 90° M/F Bend 27805 54mm Copper-Press 90° M/F Bend 27806 67mm Copper-Press 90° M/F Bend 27807 76mm Copper-Press 90° M/F Bend 27809 108mm Copper-Press 90° M/F Bend 27810 15mm Copper-Press 90° F/F Bend 27811 22mm Copper-Press 90° F/F Bend 27812 28mm Copper-Press 90° F/F Bend 27813 35mm Copper-Press 90° F/F Bend 27814 42mm Copper-Press 90° F/F Bend 27815 54mm Copper-Press 90° F/F Bend 27816 67mm Copper-Press 90° F/F Bend 27817 76mm Copper-Press 90° F/F Bend 27819 108mm Copper-Press 90° F/F Bend 27820 15mm Copper-Press 45° M/F Bend 27821 22mm Copper-Press 45° M/F Bend 27822 28mm Copper-Press 45° M/F Bend 27823 35mm Copper-Press 45° M/F Bend 27824 42mm Copper-Press 45° M/F Bend 27825 54mm Copper-Press 45° M/F Bend 27826 67mm Copper-Press 45° M/F Bend 27827 76mm Copper-Press 45° M/F Bend 27829 109mm Copper-Press 45° M/F Bend 27830 15mm Copper-Press 45° F/F Bend 27831 22mm Copper-Press 45° F/F Bend 27832 28mm Copper-Press 45° F/F Bend 27833 65mm Copper-Press 45° F/F Bend 27834 42mm Copper-Press 45° F/F Bend 27835 54mm Copper-Press 45° F/F Bend 27836 67mm Copper-Press 45° F/F Bend 27837 76mm Copper-Press 45° F/F Bend 27839 108mm Copper-Press 45° F/F Bend 27840 15mm Copper-Press Full Crossover 27841 22mm Copper-Press Full Crossover 27845 15mm Copper-Press Partial Crossover 27846 22mm Copper-Press Partial Crossover 27850 15mm Copper-Press Equal Tee 27851 22mm Copper-Press Equal Tee 27852 28mm Copper-Press Equal Tee 27853 35mm Copper-Press Equal Tee 27854 42mm Copper-Press Equal Tee 27855 54mm Copper-Press Equal Tee 27856 67mm Copper-Press Equal Tee 27857 76mm Copper-Press Equal Tee 27859 108mm Copper-Press Equal Tee 27860 15 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27861 22 x 15 x 15mm Copper-Press Reducing Tee ExBxE 27862 22 x 15 x 22 mm Copper-Press Reducing Tee ExBxE 27863 22 x 22 x 15mm Copper-Press Reducing Tee ExBxE 27865 28 x 15 x 22mm Copper-Press Reducing Tee ExBxE 27866 28 x 15 x 28mm Copper-Press Reducing Tee ExBxE 27867 28 x 22 x 22mm Copper-Press Reducing Tee ExBxE 27868 28 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27869 28 x 28 x 15mm Copper-Press Reducing Tee ExBxE 27870 28 x 28 x 22mm Copper-Press Reducing Tee ExBxE 27872 35 x 15 x 35mm Copper-Press Reducing Tee ExBxE 27874 35 x 22 x 28mm Copper-Press Reducing Tee ExBxE 27875 35 x 22 x 35mm Copper-Press Reducing Tee ExBxE 27876 35 x 28 x 28mm Copper-Press Reducing Tee ExBxE 27877 35 x 28 x 35mm Copper-Press Reducing Tee ExBxE 27880 42 x 15 x 42mm Copper-Press Reducing Tee ExBxE 27881 42 x 22 x 42mm Copper-Press Reducing Tee ExBxE 27882 42 x 28 x 42mm Copper-Press Reducing Tee ExBxE 27884 42 x 35 x 42mm Copper-Press Reducing Tee ExBxE 27885 54 x 22 x 54mm Copper-Press Reducing Tee ExBxE 27886 54 x 28 x 54mm Copper-Press Reducing Tee ExBxE 27887 54 x 35 x 54mm Copper-Press Reducing Tee ExBxE 27888 54 x 42 x 54mm Copper-Press Reducing Tee ExBxE 27889 67 x 54 x 67mm Copper-Press Reducing Tee ExBxE 27890 76 x 54 x 76mm Copper-Press Reducing Tee ExBxE 27893 108 x 54 x 108mm Copper-Press Reducing Tee ExBxE 27896 42 x 42 x 35mm Copper-Press Reducing Tee ExBxE 27900 22 x 15mm Copper-Press Reducing Coupling 27901 28 x 15mm Copper-Press Reducing Coupling 27902 28 x 22 mm Copper-Press Reducing Coupling 27903 35 x 22mm Copper-Press Reducing Coupling 27904 35 x 28mm Copper-Press Reducing Coupling 27905 42 x 22mm Copper-Press Reducing Coupling 27906 42 x 28mm Copper-Press Reducing Coupling 27907 42 x 35mm Copper-Press Reducing Coupling 27908 54 x 28mm Copper-Press Reducing Coupling 27909 54 x 35mm Copper-Press Reducing Coupling 27910 54 x 42mm Copper-Press Reducing Coupling 27915 22 x 15mm Copper-Press Reducer 27916 28 x 15mm Copper-Press Reducer 27917 28 x 22mm Copper-Press Reducer 27918 35 x 22mm Copper-Press Reducer 27919 35 x 28mm Copper-Press Reducer 27920 42 x 22mm Copper-Press Reducer 27921 42 x 28mm Copper-Press Reducer 27922 42 x 35mm Copper-Press Reducer 27923 54 x 35mm Copper-Press Reducer 27924 54 x 42mm Copper-Press Reducer 27925 67 x 54mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 27926 76 x 54mm Copper-Press Reducer 27929 108 x54mm Copper-Press Reducer 27930 108 x76mm Copper-Press Reducer 27932 54 x 28mm Copper-Press Reducer 27940 15mm Copper-Press Coupling 27941 22mm Copper-Press Coupling 27942 28mm Copper-Press Coupling 27943 35mm Copper-Press Coupling 27944 42mm Copper-Press Coupling 27945 54mm Copper-Press Coupling 27946 67mm Copper-Press Coupling 27947 76mm Copper-Press Coupling 27949 108mm Copper-Press Coupling 27950 15mm Copper-Press Slip Coupling 27951 22mm Copper-Press Slip Coupling 27952 28mm Copper-Press Slip Coupling 27953 35mm Copper-Press Slip Coupling 27954 42mm Copper-Press Slip Coupling 27955 54mm Copper-Press Slip Coupling 27956 67mm Copper-Press Slip Coupling 27957 76mm Copper-Press Slip Coupling 27960 15mm Copper-Press End Cap 27961 22mm Copper-Press End Cap 27962 28mm Copper-Press End Cap 27963 35mm Copper-Press End Cap 27964 42mm Copper-Press End Cap 27965 54mm Copper-Press End Cap 27966 67mm Copper-Press End Cap 27967 76mm Copper-Press End Cap 28071 15mm x1/2" Copper-Press Female Iron 90° Elbow 28074 22mm x3/4" Copper-Press Female Iron 90° Elbow 28081 15mm x1/2" Copper-Press Male Iron 90° Elbow 28101 15mm x1/2" x 15mm Copper-Press Female Branch Reducing Tee 28102 22mm x1/2" x 22mm Copper-Press Female Branch Reducing Tee 28104 28mm x1/2" x 28mm Copper-Press Female Branch Reducing Tee 28106 35mm x1/2" x 35mm Copper-Press Female Branch Reducing Tee 28108 42mm x1/2" x 42mm Copper-Press Female Branch Reducing Tee 28110 54mm x1/2" x 54mm Copper-Press Female Branch Reducing Tee 28115 15mm x 3/8" Copper-Press Male Iron Adaptor 28116 15mm x 1/2" Copper-Press Male Iron Adaptor 28117 15mm x 3/4" Copper-Press Male Iron Adaptor 28118 22mm x 1/2" Copper-Press Male Iron Adaptor 28119 22mm x 3/4" Copper-Press Male Iron Adaptor 28120 22mm x 1" Copper-Press Male Iron Adaptor 28121 28mm x 3/4" Copper-Press Male Iron Adaptor 28122 28mm x 1" Copper-Press Male Iron Adaptor 28125 35mm x 1 1/4" Copper-Press Male Iron Adaptor 28128 42mm x 1 1/2" Copper-Press Male Iron Adaptor 28130 54mm x 2" Copper-Press Male Iron Adaptor 28131 67mm x 2 1/2" Copper-Press Male Iron Adaptor 28133 76mm x 3" Copper-Press Male Iron Adaptor 28134 108mm x 4" Copper-Press Male Iron Adaptor 28141 15mm x 1/2" Copper-Press Plug-In Female Adapter 28142 22mm x 1/2" Copper-Press Plug-In Female Adapter 28143 22mm x 3/4" Copper-Press Plug-In Female Adapter 28145 28mm x 1" Copper-Press Plug-In Female Adapter 28148 54mm x 2" Copper-Press Plug-In Female Adapter 28149 35mm x 1" Copper-Press Plug-In Female Adapter 28151 15mm x 1/2" Copper-Press Female Iron Adaptor 28153 22mm x 1/2" Copper-Press Female Iron Adaptor 28154 22mm x 3/4" Copper-Press Female Iron Adaptor 28157 28mm x 1" Copper-Press Female Iron Adaptor 28160 35mm x 1 1/4" Copper-Press Female Iron Adaptor 28163 42mm x 1 1/2" Copper-Press Female Iron Adaptor 28165 54mm x 2" Copper-Press Female Iron Adaptor 28166 67mm x 2 1/2" Copper-Press Female Iron Adaptor 28169 76mm x 3" Copper-Press Female Iron Adaptor 28171 15mm x 1/2" Copper-Press Plug-In Male Adapter 28173 22mm x 3/4" Copper-Press Plug-In Male Adapter 28231 67 x 28mm Copper-Press Reducer 28232 67 x 35mm Copper-Press Reducer 28234 76 x 35mm Copper-Press Reducer 28233 67 x 42mm Copper-Press Reducer 28236 76 x 67mm Copper-Press Reducer 28237 108 x42mm Copper-Press Reducer 28238 108 x42mm Copper-Press Reducer 28255 67 x 28 x 67mm Copper-Press Reducing Tee ExBxE 28260 76 x 35 x 76mm Copper-Press Reducing Tee ExBxE 27897 54 x 22 x 54mm Extended Spigot Manifold Tee 27898 54 x 28 x 54mm Extended Spigot Manifold Tee 27911 67mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27912 76mm x 1/2" 2 Port Copper‐Press Multiport Coupler 27913 108mm x 3/4" 4 Port Copper‐Press Multiport Coupler 28190 15mm x 1/2" Copper Press Female Union 28192 22mm x 3/4" Copper Press Female Union 28195 28mm x 1" Copper Press Female Union 28196 35mm x 1 1/4" Copper Press Female Union 28197 42mm x 1 1/2" Copper Press Female Union 28198 54mm x 2" Copper Press Female Union 28200 15mm x 1/2" Copper Press Male Union 28203 22mm x 3/4" Copper Press Male Union 28206 28mm x 1" Copper Press Male Union 28207 35mm x 1 ¼ Copper Press Male Union 28208 42mm x 1 1/2" Copper Press Male Union 28209 54mm x 2" Copper Press Male Union 28225 15mm x1/2"Copper Press Female Backplate Elbow 28241 42mm Copper Press Flange (1 1/2" / DN40) 28242 54mm Copper Press Flange (2" / DN50) 28243 67mm Copper Press Flange (2 1/2" / DN65) 28244 76mm Copper Press Flange (3”/DN 80) 28246 108mm Copper Press Flange (4" / DN100)

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of electromagnetic water meters with stainless steel bodies and natural rubber liners. Maximum working pressure 10.0 Bar Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN40-DN300 flanged.

Marking:

Shanghai Kent Instrument logo, size, model code, serial number and other technical data on adhesive label. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

KEFD DN40, KEFD DN50, KEFD DN65, KEFD DN80, KEFD DN100, KEFD DN150, KEFD DN200, KEFD DN250, KEFD DN300.

Manufacturer:

Shanghai Kent Instrument Co., Ltd.

Company Name

Shanghai Kent Instrument Co., Ltd.

Address

169 #, Kangfa Rd., Tinglin Town, Jinshan District, Shanghai

View All Listings by this Company

Range of water meters with blue epoxy coated cast iron bodies. Maximum working pressure 16.0 Bar Maximum operating temperature 65.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2” - 8” Flange

Marking:

BOSS and product info on meter body. Flow arrow on valve body

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

38410094 - BOSS 35WMCFP 50MM FLGD COLD WATER METER WOLTMANN PULSED 38410102 - BOSS 35WMCFP 65MM FLGD COLD WATER METER WOLTMANN PULSED 38410113 - BOSS 35WMCFP 80MM FLGD COLD WATER METER WOLTMANN PULSED 38410124 - BOSS 35WMCFP 100MM FLGD COLD WATER METER WOLTMANN PULSED 38410135 - BOSS 35WMCFP 125MM FLGD COLD WATER METER WOLTMANN PULSED 38410146 - BOSS 35WMCFP 150MM FLGD COLD WATER METER WOLTMANN PULSED 38410157 - BOSS 35WMCFP 200MM FLGD COLD WATER METER WOLTMANN PULSED 38410242 - BOSS 35WMCFB 50MM FLGD COLD WATER METER WOLTMANN C/W MBUS 38410253 - BOSS 35WMCFB 65MM FLGD COLD WATER METER WOLTMANN C/W MBUS 38410264 - BOSS 35WMCFB 80MM FLGD COLD WATER METER WOLTMANN C/W MBUS 38410275 - BOSS 35WMCFB 100MM FLGD COLD WATER METER WOLTMANN C/W MBUS 38410349 - BOSS 35WMCFW 50MM FLGD COLD WATER METER M/JET MBUS W/LESS 38410360 - BOSS 35WMCFW 65MM FLGD COLD WATER METER W/MANN MBUS W/LESS 38410371 - BOSS 35WMCFW 80MM FLGD COLD WATER METER W/MANN MBUS W/LESS 38410382 - BOSS 35WMCFW 100MM FLGD COLD WATER METER W/MANN MBUS W/LESS 38410456 - BOSS 35WMCFB 50MM FLGD COLD WATER METER WOLTMANN C/W LORA 38410467 - BOSS 35WMCFB 65MM FLGD COLD WATER METER WOLTMANN C/W LORA 38410478 - BOSS 35WMCFB 80MM FLGD COLD WATER METER WOLTMANN C/W LORA 38410489 - BOSS 35WMCFB 100MM FLGD COLD WATER METER WOLTMANN C/W LORA 38410574 - BOSS 35WMHFP 50MM FLANGED HOT WATER METER WOLTMANN PULSED 38410585 - BOSS 35WMHFP 65MM FLANGED HOT WATER METER WOLTMANN PULSED 38410596 - BOSS 35WMHFP 80MM FLANGED HOT WATER METER WOLTMANN PULSED 38410604 - BOSS 35WMHFP 100MM FLANGED HOT WATER METER WOLTMANN PULSED 38410615 - BOSS 35WMHFP 125MM FLANGED HOT WATER METER WOLTMANN PULSED 38410626 - BOSS 35WMHFP 150MM FLANGED HOT WATER METER WOLTMANN PULSED 38410637 - BOSS 35WMHFP 200MM FLANGED HOT WATER METER WOLTMANN PULSED 38410711 - BOSS 35WMHFB 50MM FLANGED HOT WATER METER WOLTMANN C/W MBUS 38410722 - BOSS 35WMHFB 65MM FLANGED HOT WATER METER WOLTMANN C/W MBUS 38410733 - BOSS 35WMHFB 80MM FLANGED HOT WATER METER WOLTMANN C/W MBUS 38410744 - BOSS 35WMHFB 100MM FLANGED HOT WATER METER WOLTMANN C/W MBUS 38410818 - BOSS 35WMHFW 50MM FLGD HOT WATER METER W/MANN MBUS W/LESS 38410829 - BOSS 35WMHFW 65MM FLGD HOT WATER METER W/MANN MBUS W/LESS 38410840 - BOSS 35WMHFW 80MM FLGD HOT WATER METER W/MANN MBUS W/LESS 38410851 - BOSS 35WMHFW 100MM FLGD HOT WATER METER W/MANN MBUS W/LESS 38410456 - BOSS 35WMHFB 50MM FLGD HOT WATER METER WOLTMANN C/W LORA 38410467 - BOSS 35WMHFB 65MM FLGD HOT WATER METER WOLTMANN C/W LORA 38410478 - BOSS 35WMHFB 80MM FLGD HOT WATER METER WOLTMANN C/W LORA 38410489 - BOSS 35WMHFB 100MM FLGD HOT WATER METER WOLTMANN C/W LORA

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Range of pressure transducers with stainless steel bodies. Maximum working pressure 10.0 Bar, 20 Bar or 40 Bar. Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

9mm spigot for insertion into a quick release coupling or 1/4" BSP male.

Marking:

ABB, WRAS, Part number, Pressure range and technical info on adhesive label.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

3KXF004496U0100 - 9mm spigot. 10 bar, 3KXF004496U0200 - 9mm spigot. 10 bar, 3KXF004496U0500 - 9mm spigot. 20 bar, 3KXF004496U0600 - 9mm spigot. 20 bar, 3KXF004496U0700 - 1/4" BSP male. 40 bar, 3KXF004496U0800 - 1/4" BSP male. 40 bar, 3KXF004496U0900 - 9mm spigot. 20 bar.

Approval Holder:

ABB Ltd.

Company Name

ABB Ltd.

Address

Oldends Lane, Stonehouse, Glos.

Postcode

GL10 3TA

View All Listings by this Company

Range of click type, pop-up wastes with metal bodies. Maximum operating temperature 60.0°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

241002704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ¼” BSP (M)

Marking:

Vinzia Fratelli logo, EN274, NF logo and date of manufacturer (DDD/YY)

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

04, 05, 06 family types. Code example: 00 AA 00 00 00 00 AA(A). Made up of the below. TYPE OF WASTE (2 numbers) 04 - Waste Simple-Rapid with waste drains H60 – 75 – 100 05 - Waste Simple-Rapid with waste drains 06 - Waste free flow with all waste drains CAP (2 letters) AA - TA209 AB - TA204 AC - CO032 + TA406 (in this case the first two numbers are”04 or 05”) or TA200 + TA413 in this case the first two numbers are”06”) BA – TA191 BC – TA193 (in this case the first two number as “05”) or TA198 (in this case the first two number are”06”) BD – TA197 BE – TA195 BH – TA201 CA - TA6 + TA217 / TA229 (in this case the first two numbers are”04 or 05”) or TA6 + PA001 in this case the first two numbers are”06”) WASTE DRAIN (2 numbers) 01 - PI096 02 - PI087 03 - PI088 07 - PI096/STP 08 - PI110/STP 09 - PI088/STP 11 - PI082 19 - PI084/1STP 20 - PI084/1 21 - PI082/STP 24 - PI083 25 - PI083/STP 50 - PI099 51 – PI209 52 – PI210 62 – PI207 85 – PI010 BASE (2 numbers) 01 - RA095 02 - RA096 07 - CO110 16 - RA014 17 - RA009 50 - RA094 51 - RA100 54 - RA002 VARIANTS (2 numbers) 00 - STANDARD COMPONENTS PACKAGING (2 numbers) 00 - STANDARD PACKAGING FINISH (2 or 3 letters) CR - CHROME PLATED (these two letters are always compiled) + None - ME235-AB or no mechanism (for free flow ones) CRG - ME238

Approval Holder:

VINZIA Fratelli S.p.A.

Company Name

VINZIA Fratelli S.p.A.

Address

Via Borgomanero, 121 Briga Novarese (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 94847

General Email

gianfranco.calzoni@vinzia.com

View All Listings by this Company

Dutypoint ‘VMV’ range of cold water supply booster sets, incorporating 2 to 8 pumps with a modular stainless steel manifold system. VMV2, VMV3 and VMV4 pump sets are available with DN80 to DN150 manifolds depending on application. VMV5, VMV6, VMV7 and VMV8 pump sets are available with DN150 to DN200 manifolds, depending on application. The products incorporate spherical valves on both the suction and discharge manifolds, with expansion vessels, isolation valves, pressure gauges and transducers on the discharge manifolds only. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241204714

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN80 – DN200 Flanged connection

Marking:

Duty point, model and pressure on data label.

Installation Requirements:

R001 R415

Expiry date:

31/12/2029

Model:

VMV DN80 Versions twin, triple and quadruple pump units: VMV2-05, VMV2-07 and VMV2-10 – All motor sizes VMV3-05, VMV3-07 and VMV3-10 – All motor sizes VMV4-05, VMV4-07 and VMV4-10 – All motor sizes DN100 Versions: Twin, Triple and Quadruple Pump Units: VMV2-05, VMV2-07 and VMV2-10 – All motor sizes VMV3-05, VMV3-07 and VMV3-10 – All motor sizes VMV4-05, VMV4-07 and VMV4-10 – All motor sizes DN150 Versions: Twin, Triple and Quadruple Pump Units: VMV2-05, VMV2-20 and VMV2-25 – All motor sizes VMV3-05, VMV3-20 and VMV3-25 – All motor sizes VMV4-05, VMV4-20 and VMV4-25 – All motor sizes Units incorporating from 5 to 8 pumps (Models VMV5, VMV6, VMV7, VMV8): All units will feature DN150 – DN200 manifolds, size dependent on application. Key to Model Numbers: Example of Model Number: VMV2-15-V110 Range: VMV Number of pumps: 2 Nominal Flow rate (l/sec): 15 Inverter type e.g. ‘V’ for Vasco, or ‘H’ for Hydrovar Motor size (kW x 10)

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of pumps with plastic bodies, pistons and TPE diaphragm. For use with John Guest LLDPE pipe. The products incorporate non-return valves (not suitable for backflow protection). Maximum working pressure: 8.27 Bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002707

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

5/16” push fitting.

Marking:

LEFOO, model number, production batch# and related technical parameters on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

LFP-ABC-D. Model code description:LFP-ABC-D LF means LEFOO, P means Pump A means voltage,0=12V,1=24V,2=36V,5=115V,6=230V B means flow rate,=050,075,100,150,200,300,400,500,600,800,1000 C means function,=W means stabilized;=S means self-priming) D means motor type;=A, B, P or Blank； A - Downgrade Brush motor, B - Brushless motor, Blank - Brush motor, P - Upgraded brush motor

Manufacturer:

Lefoo Industrial Co., Ltd.

Company Name

Lefoo Industrial Co., Ltd.

Address

NO.118 Changda Road, Linping Street, Linping District, Hangzhou City, Zhejiang Province

Country

China

View All Listings by this Company

Range of horizontal multistage pumps with stainless steel bodies, diffuser and impellers and EPDM ‘O’-rings. The products incorporate a graphite-SiC-EPDM shaft seal. The products incorporate a drain plug. Maximum working pressure 8.5 bar. 9Maximum operating temperature 80°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241002722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain plug must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

P 3S & U 5S models: 1” BSP (F) inlet x 1” BSP (F) outlet. P 7S models: 1¼” BSP (F) inlet x 1” BSP (F) outlet. P 9S models: 1½” BSP (F) inlet x 1¼” BSP (F) outlet. P 18S models: 2” BSP (F) inlet x 1½” BSP (F) outlet.

Marking:

Foras (Brand of Pentax), model code and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2029

Model:

P range: P X(S) - XX/Y (T) Where: P = pump model X = Nominal flow-rate m³/h (3, 5, 7, 9, 18 see model list), S = ULTRA S range - stainless steel hydraulic part, XX = nominal power HPx100 (50 - 400 see model list), Y = Number of impellers (2 - 7 see model list), T = 3 phase, [blank] = single phase. P 3S models: P 3S-50/2; P 3S-70/3; P 3S-90/4; P 3S-100/5; P 3S-120/6; P 3S-150/7. P 5S models: P 5S-70/2; P 5S-80/3; P 5S-120/4; P 5S-150/5; P 5S-180/6; P 5S-200/7. P 7S models: P 7S-100/2; P 7S-120/3; P 7S-180/4; P 7S-250/5; P 7S-300/6. P 9S models: P 9S-100/2; P 9S-150/3; P 9S-200/4; P 9S-250/5. P 3S models: P 3S-50/2 T; P 3S-70/3 T; P 3S-90/4 T; P 3S-100/5 T; P 3S-120/6 T; P 3S-150/7 T. P 5S models: P 5S-70/2 T; P 5S-80/3 T; P 5S-120/4 T; P 5S-150/5 T; P 5S-180/6 T; P 5S-200/7 T. P 7S models: P 7S-100/2 T; P 7S-120/3 T; P 7S-180/4 T; P 7S-250/5 T; P 7S-300/6 T; P 7S-350/7 T. P 9S models: P 9S-100/2 T; P 9S-150/3 T; P 9S-200/4 T; P 9S-250/5 T. P 18S models: P 18S-180/2 T; P 18S-250/3 T; P 18S-400/4 T.

Approval Holder:

PENTAX INDUSTRIES SpA

Company Name

PENTAX INDUSTRIES SpA

Address

Viale dell’Industria 1 Veronella

Postcode

37040

Country

Italy

Phone

+39 0442 489567

General Email

g.cengia@pentax-pumps.it

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102722

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

ESPA, model & technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MULTI VSXXX-XX-(1/2/C/D/2C/2D/C-D) -(F/N) -E 1. XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2. XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4. F/N: the materials of wetted parts --N，material is SUS 316. --F，material is SUS 304. 5. E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150

Approval Holder:

ESPA

Company Name

ESPA

Address

PO Box 8156 Warehouse Q4 - 123 Sharjah Airport Free Zone, Sharjah

Country

United Arab Emirates

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102723

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

TPF on cover. TPF, model & technical information on data label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

TPVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2 ， On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 THM(-3)XX-XX\XX-SE 1. -3: different phase. -- -3: three phase，none: single phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、 16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Approval Holder:

TADMUR PUMP FACTORY WLL

Company Name

TADMUR PUMP FACTORY WLL

Address

P.O. BOX 212023 DOHA

Country

Qatar

View All Listings by this Company

Range of shower outlets with brass bodies (various finishes) and NBR ‘O’-rings. Maximum working pressure 5.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2301373

Size:

15mm compression

Marking:

Bagnodesign on body

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

KOY ROUND SHOWER HEAD DIAMETER 200 BDD-KOY-510-A-XX BDD-KOY-510-XX MEZZANINE SHOWER HEAD 250X250 BDD-MEZ-510-A-XX KOY ROUND SHOWER HEAD DIAMETER 300 BDD-ION-113030-A-XX ‘XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C)

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of (chrome plated) plastic shower handsets, each supplied with five (optional) plastic flow regulators (x2 blue, light green, dark green and grey). Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250115012

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Solex on body.

Installation Requirements:

R001 R040

Expiry date:

31/01/2030

Model:

P91100, P91101, P77600. Models added May 2025: P91200, P91201, P91202, P91203.

Approval Holder:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company

Section:

1650 Shower Outlets

Description:

A Range of Shower head(s) and/or shower handset(s).

Conditions of use Type 1 Overhead shower

Basis of Compliance:

Tested to a standard assessed as an appropriate British Standard by WRAS

Installation Requirements:

R001 R040

Expiry date:

31/05/2030

Notes & Further Information

XXX Denotes the following: First, second & third XXX for different finishes: Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD

Range of shower arms, (stainless steel bodies – various finishes). Open outlet use only. Maximum operating temperature - 85°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240988029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Aqualisa on escutcheon

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

ACY1001 Ceiling fixed arm - round - 200mm ACY1002 Wall fixed arm - round - 400mm ACY1003 Wall fixed arm - square - 400mm

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of overhead shower and shower handsets with (brass or plastic bodies – various finishes), incorporating a stainless-steel strainer on the inlets. Open outlet use only Maximum operating temperature – 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241188019

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Shower handsets - ½” BSP (M) Overhead showers – ½” BSP (F)

Marking:

Aqualisa on body

Installation Requirements:

R001 R040

Expiry date:

30/11/2029

Model:

704418 110MM 3 FUNCTION HANDSET AL089 - DARK GREY PLATE 704307 110MM 3 FUNCTION HANDSET AL059 706901 110MM 3 FUNCTION HANDSET MATT BLACK AL242 707540 99MM SHOWER HANDSET CHROME AL255 ROUND ACY1004 100MM FIXED HEAD ROUND CHROME ACY1007 300MM FIXED HEAD ROUND CHROME 704336 200MM FIXED HEAD (CP) AL065 SQUARE 704323 200MM FIXED HEAD (CP) AL070 ROUND 704426 192MM FIXED HEAD (CP) AL088 DARK GREY PLATE 704477 200MM FIXED HEAD (CP) AL087 SQUARE 707543 200MM FIXED HEAD CHROME AL259 ROUND 706906 200MM ROUND FIXED HEAD MATT BLACK AL243 Added Jan 2026: 707344 200MM FIXED HEAD AL191 - SQUARE MB 707335 192MM FIXED HEAD MATT BLACK AL180

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Section:

1750 Taps

Description:

A Range of Draw off bib tap(s)

Wall Mounted

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Notes & Further Information

Model added February 2026: RP3 VAL2 BIB C CD

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Section:

1800 Taps

Description:

A Pillar tap(s).

Deck Mounted Capable of achieving AUK2 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R005

Expiry date:

28/05/2030

Notes & Further Information

X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Cross top type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1.

Product Images

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturers:

PPI XIAMEN INDUSTRY CO LTD

Nylon braided flexible hose with a 'PE-BWG' inner hose. The hose incorporates a brass ball stem connection. Maximum operating temperature 85.0°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

241202008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only

Size:

½” BSP F 12.7mm OD spigot connection

Marking:

Kaiping City logo, WRAS, Production Year YYYY

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

WS13-H001 The length is from 20 to 200CM

Manufacturer:

Kaiping City Hualing Hoses Co Ltd

Company Name

Kaiping City Hualing Hoses Co Ltd

Address

No.18 East Road, Industrial Park Shuikou Town Kaiping City Guangdong Province

Country

CHINA

View All Listings by this Company

Range of nylon braided PEX lined flexible hose assemblies with EPDM washers and ‘O’-rings with a variety of end connections. Maximum operating temperature 65.0°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

241202009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

See Models

Marking:

Finial logo (DJ), WRAS, date of manufacture (YYYY/MM) on ferrule

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

DJ-BZ-NL-04 (1363980) 12.7mm OD quick connection / 11.8mm OD quick connection DJ-BZ-NL-05 (1422129) 11.8mm OD quick connection / 9.9mm OD quick connection DJ-BZ-NL-06 (1304177) 1/2" BSP F captive nut / 12.7mm OD quick connection DJ-BZ-NL-07 (1355634) 1/2" BSP F captive nut / 12.7mm OD quick connection DJ-BZ-NL-08 (1407758) 1/2" BSP F captive nut / 12.7mm OD quick connection DJ-BZ-NL-10 (1522992) 1/2" BSP F captive nut / 12.7mm OD quick connection DJ-BZ-NL-11 (1547778) 1/2" BSP F captive nut / M12 threaded connection female Remark: The length is from 800 to 2000mm.

Manufacturer:

Finial Plumbing Co., Ltd.

Company Name

Finial Plumbing Co., Ltd.

Address

No 36-38, Siqian Development Zone, Shuikou Town, Kaiping City

Country

Guangdong Province,

Phone

86-750-2729525

View All Listings by this Company

Range of PVC flexible shower hoses with a PVC inner hose. Maximum operating temperature 85°C.

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

241202020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

½” BSP (F) captive nut x ½” BSP (F) conical nut.

Marking:

Jetom and WRAS on end connector.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

HAAHG-***101B-ZS11 (DN7) H31FN-***101B-ZS11 (DN8) HABHH-***101B-ZS11 (DN10) Where *** denotes the length of hose, and will be replaced with the length in cm, as examples: 050 = 50cm (Shortest length) 200 = 200cm (Longest length)

Manufacturer:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

View All Listings by this Company