Directory Search Results

Print List

#2301072

Concealed WC dual flushing cistern with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two push button assembly for a 6 or 3 litre flush volume. Maximum working pressure - 10 Bar Maximum operating temperature – Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301072
Size:
½” BSP (M)
Marking:
Roper Rhodes Group and model number on sticker on front of cistern. 6 Litre line inside of cistern
Installation Requirements:
R001 R280 R556 R571 R581
Expiry date:
31/01/2028
Model:
TR9001 / VOR790/ INST13001
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2301334

Concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301334
Size:
½” BSP (M
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
OLI74 Plus Electronic
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2301335

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301335
Size:
½” BSP (M)
Marking:
OLI etched on flush panel; OLI, OLI120 Plus Elect, Date of manufacturer DD.MM.YY on adhesive label, 6L & waterline mould on plastic support for flush valve
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
OLI 120 Plus Electronic
Product Images

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2303359

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2303359
Size:
½” BSP (M)
Marking:
R&T on moulded on fixed plate. Model number on adhesive label on front of lid. 6L waterline printed within cistern
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2028
Model:
G3005C MODELS ADDED IN JULY 2024 G3005CA-1 G3005CA-2 G3005CB
Product Images

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company

Print This Approval


#2212097

Concealed WC dual flushing cistern with a bottom entry BS 1212 - 4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly for a 6 or 3 litre flush volume. Maximum working pressure 10.0 bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2212097
Size:
½” BSP (M)
Marking:
VADO, WRAS & Model name on bottom of cistern, 6 Litre inside of cistern.
Installation Requirements:
R001 R280 R556 R560 R571 R581
Expiry date:
31/12/2027
Model:
WG-095-F/C (500MM) WITH FRAME & WG-095-C (500MM) WITHOUT FRAME CISTERNS.

Approval Holder:
VADO
Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company

Print This Approval


#2305327

Concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by an electronically controlled flush valve. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2305327
Size:
1/2” BSP (M).
Marking:
Cistermiser on IR sensor, Adhesive label on cistern stating Cistermiser, address, model and other tech info.
Installation Requirements:
R001 R280 R556 R581 R560
Expiry date:
31/05/2028
Model:
EasyflushEVO Cistern.
Product Images

Approval Holder:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley
Postcode
RG5 3AN
Country
United Kingdom
General Email
jake.felstead@cistermiser.co.uk

View All Listings by this Company
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley
Postcode
RG5 3AN
Country
United Kingdom
General Email
jake.felstead@cistermiser.co.uk

View All Listings by this Company

Print This Approval


#2306301

WC flushing cistern incorporating a side entry BS 1212-4 compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by electronic or manual actuation. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306301
Size:
½” BSP (M)
Marking:
TOTO on adhesive label on body
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2028
Model:
Neorest range: WH183EAT MB175M#SS (actuation plate) MODEL ADDED OCTOBER 2024: WH183ETNF MODEL ADDED JANUARY 2025: WH183ET HM184 (auto flush motor)
Product Images

Approval Holder:
TOTO Europe GmbH
Company Name
TOTO Europe GmbH
Address
Zollhof 2 40211 Düsseldorf Germany
Phone
+49 211 273080

View All Listings by this Company

Print This Approval


#2306040

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306040
Size:
½” BSP (M)
Marking:
Bestter, Model number and Wras on Front of support bracket inside of cistern. 6 litre mark inside cistern
Installation Requirements:
R001 R556 R581
Expiry date:
30/06/2028
Model:
T1910 T1911
Product Images

Approval Holder:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company
Manufacturer:
Bestter(Xiamen) Technology lnc.
Company Name
Bestter(Xiamen) Technology lnc.
Address
No.601, Tonghong Road, Tong'an Park Tong'an Industrial Zone, Xiamen City , China

View All Listings by this Company

Print This Approval


#2306078

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2306078
Size:
½” BSP (M)
Marking:
VADO, WRAS & Model number on Front cover. 6 litre mark inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
30/06/2028
Model:
WG-095S-F/C/VADO & WG-095S-C/VADO

Approval Holder:
VADO
Company Name
VADO
Address
Cheddar Business Park Wedmore Road Cheddar
Postcode
BS27 3EB
Country
United Kingdom
Phone
01934 745895
General Email
tom.ross@vado.com

View All Listings by this Company

Print This Approval


#2311060

WC flushing cistern incorporating a side entry BS 1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2311060
Size:
1/2” BSP (M)
Marking:
Roper Rhodes logo, Model and other information on adhesive label on body, 6 Litre line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
30/11/2028
Model:
TR9006 / INST13006
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company
Manufacturer:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2301369

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3.5 litres. The cistern is operated by an electronically controlled flush valve. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2301369
Size:
½” BSP (M)
Marking:
Dolphin logo on flush panel Dolphin logo, Date of manufacturer DD.MM.YY on adhesive label, 6L & waterline mould on plastic support for flush valve
Installation Requirements:
R001 R556 R581
Expiry date:
31/01/2028
Model:
DB551x.E Dolphin Blue 126mm Electronic Cistern

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2111390

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111390
Size:
½” BSP (M)
Marking:
Ideal Standard on Adhesive below insert within cistern: 6L waterline within cistern.
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
R031767 Prosys 120 WC cistern Mech CL2 6L & R031867 Prosys 120 WC cistern Pneu CL2 6L

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#2312362

Range of concealed WC dual flushing cisterns with a vertical BS 1212-4(2016) float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a two-push button assembly. The product also incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10 Bar, cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2312362
Size:
½” BSP (M).
Marking:
OLI on cistern. 6l line inside cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/12/2028
Model:
AI103 PLUS MEC AI103 PLUS PNEU

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company
Manufacturer:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#2011082

Range of concealed cisterns incorporating a side entry float operated inlet valve providing a type AC air gap arrangement and a dual flush outlet valve. Maximum working pressure 10.0 Bar. Cold water use only.

Section:
2036 Cistern - flushing
Section Subtitle:
Incorporating Type AC air gap, providing fluid category 3 backflow protection. May require additional backflow protection if used in a WC. Please consult your local water company for advice. Please refer to the clarification of the requirements of the Water Supply (Water Fittings) Regulations, Byelaws in Scotland, as they apply to Type AUK1 air gaps in WC suites and the interim agreement.
WRAS Approval Number:
2011082
Size:
½” BSP (M)
Marking:
Tece Logo on front of cistern.
Installation Requirements:
R001 R555
Expiry date:
30/11/2025
Model:
Product Code FF9041035 and 9041035 - TECE Concealed dual flushing cistern (Uni), with front and top actuation Product Code FF9300078 and 9300078 - TECEprofil frame with concealed dual flushing cistern (Uni), with front and top actuation
Product Images

Approval Holder:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company
Manufacturer:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company

Print This Approval


#2010909

BS EN 14055: 2018 concealed WC cistern incorporating a side entry compact type float operated inlet valve providing a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5) with a pneumatic or cable operated drop valve capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. The cistern is operated by manual push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2034 Cistern - Flushing
Section Subtitle:
Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:
2010909
Size:
½” BSP Inlet connection.
Marking:
Top of cistern lid marked ‘DUDLEY OSMO T1’. Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R574
Expiry date:
31/10/2025
Model:
OSMO T1 Concealed Cistern (Category 5).

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2012904

BS EN 14055 (2018) concealed WC cistern incorporating a side entry compact type float operated inlet valve discharging via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5) and a dual or single flush pneumatic or dual flush cable operated drop valve capable of full flush volumes of up to 6 litres with a reduced flush of up to 4 litres. The cistern is operated by manual push button/push plate. One of the side entry inlet valves is mounted internally and is supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2034 Cistern - Flushing
Section Subtitle:
Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:
2012904
Size:
½” BSP Male or 15mm Push-fit Inlet connection
Marking:
Top of outlet drop valve marked ‘TD’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R574
Expiry date:
31/12/2025
Model:
OBC Concealed Cistern (Category 5)
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2101907

BS EN 14055: 2018 concealed WC flushing cistern incorporating a side entry compact type float operated inlet valve providing a Type AB air gap and lever operated syphon capable of full flush volumes of up to 6 litres and reduced flush of up to 4 litres. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2034 Cistern - Flushing
Section Subtitle:
Incorporating Type AB air gap, providing fluid category 5 backflow protection. Suitable for use in a WC suite.
WRAS Approval Number:
2101907
Size:
½” BSP Inlet connection.
Marking:
Top syphon marked ‘DUDLEY TURBO EDGE’. Front cover marked ‘Dudley’, Inlet valve discharge cap marked ‘HYDROFLO’. Front nut of inlet valve marked ‘DUDLEY BS 1212/4’.
Installation Requirements:
R001 R280 R574
Expiry date:
31/01/2026
Model:
OSMO F1 Concealed Cistern (Category 5).
Product Images

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2012908

BS EN 997:2018 Roca Wall Hung W.C. pan (Ceramic), Thomas Dudley ‘A’ frame incorporating a Thomas Dudley Vantage Concealed cistern. The cistern incorporates a side entry compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern can be operated by a manual push button / push plate options. The inlet valve is mounted internally and supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2012908
Size:
15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Corner of wall hung pan marked ‘Roca’
Installation Requirements:
R001 R559
Expiry date:
31/12/2025
Model:
Roca The Gap A346477/8 Wall Hung W.C. Suite
Product Images

Approval Holder:
Neville Lumb
Company Name
Neville Lumb
Address
General Email
JCresswell@tyde.co.uk

View All Listings by this Company

Print This Approval


#2012907

BS EN 997:2018 Vitra wall hung W.C. pan (Ceramic), Thomas Dudley ‘A’ frame incorporating a Thomas Dudley Vantage Concealed cistern. The cistern incorporates a side entry compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of 3 litres. The cistern can be operated by manual a push button / push plate options. The inlet valve is mounted internally and supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve Maximum working pressure 10.0 bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2012907
Size:
15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Corner of wall hung pan marked ‘Vitra’
Installation Requirements:
R001 R559
Expiry date:
31/12/2025
Model:
Vitra 7041B003-0075 Wall Hung W.C. Suite
Product Images

Approval Holder:
Neville Lumb
Company Name
Neville Lumb
Address
General Email
JCresswell@tyde.co.uk

View All Listings by this Company
Manufacturer:
Neville Lumb
Company Name
Neville Lumb
Address
General Email
JCresswell@tyde.co.uk

View All Listings by this Company

Print This Approval


#2012906

BS EN 997:2018 Vitra wall hung W.C. pan (Ceramic), Thomas Dudley ‘A’ or Illusion Compact Universal frame incorporating a Thomas Dudley Vantage Concealed cistern. The cistern incorporates a side entry compact type float operated inlet valve providing a Type AG air gap with a dual or single flush pneumatic drop valve capable of full flush volumes of up to 6 litres and a reduced flush of 3 litres. The cistern can be operated by manual a push button / push plate options. The inlet valve is mounted internally and supplied via a stainless steel braided EPDM lined flexible hose assembly which incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2012906
Size:
15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Corner of wall hung pan marked ‘Vitra’
Installation Requirements:
R001 R559
Expiry date:
31/12/2025
Model:
Vitra 7040B003-0075 Wall Hung W.C. Suite
Product Images

Approval Holder:
Neville Lumb
Company Name
Neville Lumb
Address
General Email
JCresswell@tyde.co.uk

View All Listings by this Company
Manufacturer:
Neville Lumb
Company Name
Neville Lumb
Address
General Email
JCresswell@tyde.co.uk

View All Listings by this Company

Print This Approval


#2104902

BS EN 997:2018 RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan (Ceramic), Thomas Dudley ‘A’ frame incorporating a Thomas Dudley Vantage Concealed cistern with a side entry compact type float operated inlet valve which discharges via a Type AG airgap and a dual flush pneumatic drop valve capable of full flush volumes of 4.5 litres and a reduced flush of 3 litres. The inlet connection hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2104902
Size:
15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Corner of wall hung pan marked ‘RAK CERAMICS’
Installation Requirements:
R001 R559
Expiry date:
30/04/2026
Model:
RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan and Thomas Dudley Illusion A or Illusion Compact Universal Frame

Approval Holder:
Ruddy Joinery & Fit-Out Specialists
Company Name
Ruddy Joinery & Fit-Out Specialists
Postcode
MK45 5BS

View All Listings by this Company

Print This Approval


#2304107

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2304107
Size:
Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.
Marking:
Caple and product info on adhesive label on body. Caple on cover plate
Installation Requirements:
R001 R009 R170 R040
Expiry date:
30/04/2028
Model:
BOILER2

Approval Holder:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval


#2304108

Undercounter boiling water cistern with a stainless steel body, stainless steel element and silicone ‘O’-rings and gaskets. Maximum working pressure 8.0 bar. Maximum operating temperature 95°C.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2304108
Size:
Stainless steel braided PEX lined flexible hose assembly with ½" captive nut end connection.
Marking:
CAPLE (Brand of Maurice Lay Distributors Ltd) , WRAS and product info on adhesive label on body.
Installation Requirements:
R001 R009 R170 R040
Expiry date:
30/04/2028
Model:
BOILER3

Approval Holder:
Maurice Lay Distributors Ltd
Company Name
Maurice Lay Distributors Ltd
Address
Fourth Way Avonmouth Bristol
Postcode
BS11 8DW
Phone
0117 938 1900
General Email
info@caple.co.uk

View All Listings by this Company

Print This Approval


#240704726

`PW` range of one-piece and two-piece GRP water storage cisterns and covers fitted with screened breather and supplied with a screened overflow. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704726
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
90 – 12,000 litres.
Marking:
Purewater storage logo, contact info, nominal capacity, product info on adhesive label on body
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
Purewater PW range
Product Images

Approval Holder:
Purewater Storage Ltd
Company Name
Purewater Storage Ltd
Address
40-46 Mariner Lichfield Road Industrial Estate Tamworth
Postcode
B79 7UL
Country
United Kingdom
Phone
01213234000
General Email
stephen@purewaterstorage.co.uk

View All Listings by this Company
Manufacturer:
Purewater Storage Ltd
Company Name
Purewater Storage Ltd
Address
40-46 Mariner Lichfield Road Industrial Estate Tamworth
Postcode
B79 7UL
Country
United Kingdom
Phone
01213234000
General Email
stephen@purewaterstorage.co.uk

View All Listings by this Company

Print This Approval


#240704727

Purewater ‘PW’ range of GRP sectional storage cisterns and covers fitted with screened breather and supplied with a screened overflow. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704727
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
500 - 1,000,000 litres
Marking:
Purewater storage logo, contact info, nominal capacity, product info on adhesive label on body
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
Purewater PW range
Product Images

Approval Holder:
Purewater Storage Ltd
Company Name
Purewater Storage Ltd
Address
40-46 Mariner Lichfield Road Industrial Estate Tamworth
Postcode
B79 7UL
Country
United Kingdom
Phone
01213234000
General Email
stephen@purewaterstorage.co.uk

View All Listings by this Company

Print This Approval


#240704732

Range of one-piece and two-piece GRP water storage cisterns and covers fitted with screened breather and supplied with a screened overflow. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704732
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
90 – 12,000 litres.
Marking:
Stuart Turner logo, contact info, nominal capacity, product info on adhesive label on body
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
Aquaboost range

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#240704729

Range of one-piece and two-piece GRP water storage cisterns and covers fitted with screened breather and supplied with a screened overflow. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704729
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
90 – 12,000 litres.
Marking:
DPT logo, contact info, nominal capacity, product info on adhesive label on body.
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
DPT range

Approval Holder:
Direct Pumps and Tanks Limited
Company Name
Direct Pumps and Tanks Limited
Address
Unit 12 Cossall Industrial Estate Ilkeston Derbyshire
Postcode
DE7 5UA
Phone
0115 9444474

View All Listings by this Company

Print This Approval


#240704730

Range of one-piece and two-piece GRP water storage cisterns and covers fitted with screened breather and supplied with a screened overflow. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704730
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
90 – 12,000 litres.
Marking:
Flowmech logo, contact info, nominal capacity, product info on adhesive label on body.
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
Flowmech range

Approval Holder:
FLOWMECH PRODUCTS LTD
Company Name
FLOWMECH PRODUCTS LTD
Address
ABBEY HOUSE CHARTER STREET LEICESTER
Postcode
LE1 3UD

View All Listings by this Company

Print This Approval


#240704731

Range of one-piece and two-piece GRP water storage cisterns and covers fitted with screened breather and supplied with a screened overflow. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704731
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
90 – 12,000 litres.
Marking:
Flowtech Water Solutions, contact info, nominal capacity, product info on adhesive label on body.
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
Flowtech range

Approval Holder:
Flowtech Water Solutions Ltd
Company Name
Flowtech Water Solutions Ltd
Postcode
WN3 6xp

View All Listings by this Company

Print This Approval


#240704733

DAB range of one-piece and two-piece GRP water storage cisterns and covers fitted with screened breather and supplied with a screened overflow. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704733
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
90 – 12,000 litres.
Marking:
DAB logo, contact info, nominal capacity, product info on adhesive label on body
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
DAB range

Approval Holder:
DAB PUMPS SPA
Company Name
DAB PUMPS SPA
Address
Via Marco Polo 14 Mestrino (PD)
Postcode
35035
Country
Italy
General Email
certifications@dwtgroup.com

View All Listings by this Company

Print This Approval


#240704736

Tanks Direct range of one-piece and two-piece GRP water storage cisterns and covers fitted with screened breather and supplied with a screened overflow. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704736
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
90 – 12,000 litres.
Marking:
Tanks Direct logo, contact info, nominal capacity, product info on adhesive label on body
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
Tanks Direct range

Approval Holder:
Tanks Direct
Company Name
Tanks Direct
Address
Channel House Mart Rd Minehead
Country
Somerset
General Email
stephen@purewaterstorage.co.uk

View All Listings by this Company

Print This Approval


#241004045

‘Precolor’ range of one piece, pre-insulated cold water storage cisterns and covers for domestic water storage, supplied with a wholesome water kit. The cisterns walls are available in grey, blue, green, white, red and anthracite grey (external) colours and the cistern base is straw coloured. For cold water use only. From November 2024 the water contact layer of the cistern base and walls is available in grey or straw colours. The outer layer of the cistern base is available in blue, green, white, red and anthracite grey colours.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
241004045
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
20 litres – 42,000 litres.
Marking:
Precolor on adhesive label on body.
Installation Requirements:
R001 R270 R280
Expiry date:
31/10/2029
Model:
Precolor 20 - 50,000. Precolor Excell 40,001 – 42,000.

Manufacturer:
Precolor Sales Limited
Company Name
Precolor Sales Limited
Address
Newport Road, Market Drayton, Shropshire
Postcode
TF9 2AA
Phone
01630 657281

View All Listings by this Company

Print This Approval


#241004047

Drayton GRP range of one piece, pre-insulated cold water storage cisterns and covers for domestic water storage, supplied with a wholesome water kit. The cisterns walls are available in grey, blue, green, white, red and anthracite grey (external) colours and the cistern base is straw coloured. For cold water use only. From November 2024 the water contact layer of the cistern base and walls is available in grey or straw colours. The outer layer of the cistern base is available in blue, green, white, red and anthracite grey colours.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
241004047
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
20 litres – 42,000 litres.
Marking:
Drayton Tank and product info on adhesive label.
Installation Requirements:
R001 R270 R280
Expiry date:
31/10/2029
Model:
Drayton GRP Water Tanks

Approval Holder:
Drayton Tank & Accessories Ltd
Company Name
Drayton Tank & Accessories Ltd
Address
Unit 21 Oakwell Business Centre Barnsley
Postcode
S71 1HX
Country
South Yorkshire.
Phone
0871 288 4213
General Email
info@draytontank.co.uk

View All Listings by this Company

Print This Approval


#240704741

Flowtech FS Range of GRP sectional storage cisterns and covers fitted with screened breather and supplied with a screened overflow. Cold water use only.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704741
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
500 - 1,000,000 litres
Marking:
Flowtech logo, contact info, nominal capacity, product info on adhesive label on body
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
Flowtech FS range

Approval Holder:
Flowtech Water Solutions Ltd
Company Name
Flowtech Water Solutions Ltd
Postcode
WN3 6xp

View All Listings by this Company

Print This Approval


#241004048

GRPBP range of one piece, pre-insulated cold water storage cisterns and covers for domestic water storage, supplied with a wholesome water kit. The cisterns walls are available in grey, blue, green, white, red and anthracite grey (external) colours and the cistern base is straw coloured. For cold water use only. From November 2024 the water contact layer of the cistern base and walls is available in grey or straw colours. The outer layer of the cistern base is available in blue, green, white, red and anthracite grey colours.

Section:
0120 Cisterns Storing Water for Domestic Purposes
Section Subtitle:
Drinking, washing, cooking and sanitary. Cisterns in this section comprise units, which, where detailed, include all the essential items identified in Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999. Where these items are not detailed in the directory entry, these will need to be included at point of installation, in order to fully comply with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
241004048
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
20 litres – 42,000 litres.
Marking:
GRPBP & capacity on adhesive label on body.
Installation Requirements:
R001 R270 R280
Expiry date:
31/10/2029
Model:
GRPBP tank 20-50000 GRPBP Excell 40001 - 42000

Approval Holder:
GRP BUILDING PRODUCT
Company Name
GRP BUILDING PRODUCT
Address
UNIT 2A HAM LANE KINGSWINFORD
Postcode
DY6 7JU

View All Listings by this Company

Print This Approval


#240702049

Range of GRP sectional cisterns with butyl seals, stainless steel bolts and an optional PVC-U flange connection. Cold water use only.

Section:
0135 Cisterns
Section Subtitle:
Cold-water storage with cover or roof - plastic, sectional. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240702049
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1m3 to 3000m3
Marking:
Stalwart Engineering UK Ltd. logo, size, nominal capacity and actual capacity on label on body
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
ST-GRP Stalwart Tanks
Product Images

Manufacturer:
Stalwart Engineering UK LTD
Company Name
Stalwart Engineering UK LTD
Address
29A, 3/F., 23 Wharf Street London
Postcode
SE8 3GG
Country
United Kingdom

View All Listings by this Company

Print This Approval


#240704715

Sekisui F range of un-insulated GRP sectional cisterns. The larger cisterns have stainless steel internal bracing and UPVC pole supports. Insulated cisterns were added to the approval in March 2025. All cisterns are for cold water use only.

Section:
0135 Cisterns
Section Subtitle:
Cold-water storage with cover or roof - plastic, sectional. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
240704715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1000 Litres to 3,600,000 Litres
Marking:
Sekisui, model and product information on label.
Installation Requirements:
R001 R270 R280 R350
Expiry date:
31/07/2029
Model:
Sekisui F range: FS (1m high). FH, FHX (1.5m high), FW, FWX, FJX (2m high). FT, FTX (2.5m high). FZ, FZX (3m high). FK, FKX (3.5m high). FQ, FQX - (4m high).
Product Images

Approval Holder:
Sekisui Aqua Systems Co., Ltd.
Company Name
Sekisui Aqua Systems Co., Ltd.
Address
21st Floor, Tower West, Umeda Sky Building, 1-30 1-chome, Oyodonaka, Kita-ku, Osaka
Country
Japan

View All Listings by this Company
Manufacturer:
Sekisui Aqua Systems Co., Ltd.
Company Name
Sekisui Aqua Systems Co., Ltd.
Address
21st Floor, Tower West, Umeda Sky Building, 1-30 1-chome, Oyodonaka, Kita-ku, Osaka
Country
Japan

View All Listings by this Company

Print This Approval


#240504021

Press (TH press profile) and screw/compression fittings with brass bodies for use with Comisa Evo Pipe (PE-RT/AL/PE), for above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240504021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
Comisa logo, date of manufacture, made in italy, size stamped on crimp of fittings. Comisa logo, EVO PE-RT, date of production DD/MMYYY and other technical information printed on pipes.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
Press fittings MU0830005160 Tee Diss 16X2-1/2"Fe-16X2 MU0830005200 Tee Diss 20X2-1/2"Fe-20X2 MU0831005160 Racc Diss 16 x 2-1/2"Fe MU0831005200 Racc Diss 20 x 2-1/2"Fe MU0832005160 Wallplate elbow assembled in set 1/2" - 16 x 2 MU0832005200 Wallplate elbow assembled in set 1/2" - 20 x 2 MU0832007200 Wallplate elbow assembled in set 3/4" - 20 x 2 MU0833005160 Wallplate elbow with soundproof elements assembled in set 16 x 2 - 1/2” MU0834005160 Sanitary mounting plate assembled with 2 wallplate elbows, distance 76 mm 1/2” - 16 x 2 MU0834005200 Sanitary mounting plate assembled with 2 wallplate elbows, distance 76 mm 1/2” - 20 x 2 MU0835005160 Sanitary mounting plate assembled with 2 wallplate elbows, distance152 mm 1/2” - 16 x 2 MU0835005200 Sanitary mounting plate assembled with 2 wallplate elbows, distance152 mm 1/2” - 20 x 2 MU0850000160 Tee 16 x 2 MU0850000200 Tee 20 x 2 MU0850000260 Tee 26 x 3 MU0851005160 Male Tee 16 x 2 - 1/2” - 16 x 2 MU0851005200 Male Tee 20 x 2 - 1/2” - 20 x 2 MU0851005260 Male Tee 20 x 2 - 3/4” - 20 x 2 MU0851007200 Male Tee 20 x 2 - 3/4” - 20 x 2 MU0851007260 Male Tee 26 x 3 - 3/4” - 26 x 3 MU0851010260 Male Tee 26 x 3 - 1” - 26 x 3 MU0852005160 Female Tee 16 x 2 - 1/2” - 16 x 2 MU0852005200 Female Tee 20 x 2 - 1/2” - 20 x 2 MU0852005260 Female Tee 26 x 3 - 1/2” - 26 x 3 MU0852007200 Female Tee 20 x 2 - 3/4” - 20 x 2 MU0852007260 Female Tee 26 x 3 - 3/4” - 26 x 3 MU085300ABA0 Reducing Tee 16 x 2 - 20 x 2 - 16 x 2 MU085300BAA0 Reducing Tee 20 x 2 - 16 x 2 - 16 x 2 MU085300BAB0 Reducing Tee 20 x 2 - 16 x 2 - 20 x 2 MU085300BBA0 Reducing Tee 20 x 2 - 20 x 2 - 16 x 2 MU085300BDB0 Reducing Tee 20 x 2 - 26 x 3 - 20 x 2 MU085300DAA0 Reducing Tee 26 x 3 - 16 x 2 - 16 x 2 MU085300DAB0 Reducing Tee 26 x 3 - 16 x 2 - 20 x 2 MU085300DAD0 Reducing Tee 26 x 3 - 16 x 2 - 26 x 3 MU085300DBA0 Reducing Tee 26 x 3 - 20 x 2 - 16 x 2 MU085300DBB0 Reducing Tee 26 x 3 - 20 x 2 - 20 x 2 MU085300DBD0 Reducing Tee 26 x 3 - 20 x 2 - 26 x 3 MU085300DDA0 Reducing Tee 26 x 3 - 26 x 3 - 16 x 2 MU085300DDB0 Reducing Tee 26 x 3 - 26 x 3 - 20 x 2 MU0856005160 WC Cistern Elbow 16 x 2 - 1/2” MU0856005200 WC Cistern Elbow 20 x 2 - 1/2” MU0857005160 WC Cistern T-Piece 16 x 2 - 1/2" - 16 x 2 MU0857005200 WC Cistern T-Piece 20 x 2 - 1/2" - 20 x 2 MU0858016150 WC Cistern T-Piece 16 x 2 - 15 mm MU08590KT010 Kit plaster fittings 90 ° - 1/2 "female 1/2" female 16x2 MU08590KT020 Kit plaster fittings 90 ° - 1/2 "female 1/2" female 20x2 MU0860000160 Elbow 90°16 x 2 MU0860000200 Elbow 90°20 x 2 MU0860000260 Elbow 90°26 x 3 MU0861003160 Male Elbow 90° MU0861005160 Male Elbow 90° MU0861005200 Male Elbow 90° MU0861007160 Male Elbow 90° MU0861007200 Male Elbow 90° MU0861007260 Male Elbow 90° MU0861010260 Male Elbow 90° MU08620H5160 Female Elbow 90° 16 x 2 - 1/2” h33 mm MU0862005160 Female Elbow 90° 16 x 2 - 1/2” h25 mm MU0862005200 Female Elbow 90° 1/2" - 20 x 2 MU0862007160 Female Elbow 90° 3/4" - 16 x 2 MU0862007200 Female Elbow 90° 3/4" - 20 x 2 MU0862007260 Female Elbow 90° 3/4" - 26 x 3 MU0862010260 Female Elbow 90° 1" - 26 x 3 MU0863L05160 Wallplate elbow 90° 16 x 2 - 1/2” h. 78mm MU0863L05200 Wallplate elbow 90° 20 x 2 - 1/2” h. 78mm MU0863003160 Reducing Tee 16 x 2 - 3/8” h. 39mm MU0863005160 Reducing Tee 16 x 2 - 1/2” h. 39mm MU08630H5160 Reducing Tee 16 x 2 - 1/2” h. 52mm MU0863005200 Reducing Tee 20 x 2 - 1/2” h. 52mm MU0863007200 Reducing Tee 20 x 2 - 3/4” h. 52 mm MU0863007260 Reducing Tee 26 x 3 - 3/4” h. 52mm MU0864005160 Wallplate elbow-double short 90° 16 x 2 - 1/2” - 16 x 2 h. 52mm MU0864005200 Wallplate elbow-double short 90° 20 x 2 - 1/2” - 20 x 2 h. 52mm MU0865005160 Wallplate elbow for series connections 16 x 2 - 1/2” F - 16 x 2 - h 52 mm MU0865005200 Wallplate elbow for series connections 20 x 2 - 1/2” F - 20 x 2 - h 52 mm MU0866000260 Elbow 45° 26 x 3 MU0867005160 Elbow Male/Female Long 16 x 2 - h 78 mm MU0867005200 Elbow Male/Female Long 20 x 2 - h 78 mm MU0868005160 Male angle screw connector 90° 1/2" - 16 x 2 MU0868005200 Male angle screw connector 90° 1/2" - 20 x 2 MU0868007200 Male angle screw connector 90° 3/4" - 20 X 2 MU0869005160 Female angle screw connector 90° 1/2" - 16 x 2 MU0869005200 Female angle screw connector 90° 1/2" - 20 x 2 MU0869007200 Female angle screw connector 90° 3/4" - 20 X 2 MU0870000160 Straight coupler 16 x 2 MU0870000200 Straight coupler 20 x 2 MU0870000260 Straight coupler 26 x 3 MU0870R20160 Reducing coupling double 20 x 2 - 16 x 2 MU0870R26160 Reducing coupling double 26 x 3 - 16 x 2 MU0870R26200 Reducing coupling double 26 x 3 - 20 x 2 MU0871003160 Male Coupling MU0871005160 Male Coupling MU0871005200 Male Coupling MU0871005260 Male Coupling MU0871007160 Male Coupling MU0871007200 Male Coupling MU0871007260 Male Coupling MU0871010260 Male Coupling MU0873005160 Male screw fittings, tapered 1/2" - 16 x 2 MU0873005200 Male screw fittings, tapered 1/2" - 20 x 2 MU0873007160 Male screw fittings, tapered 3/4" - 16 x 2 MU0873007200 Male screw fittings, tapered 3/4" - 20 x 2 MU0873007260 Male screw fittings, tapered 3/4" - 26 x 3 MU0873010260 Male screw fittings, tapered 1" - 26 x 3 MU087500716L Connecting screw fittings with Eurocone raw 3/4" - 16 x 2 MU087500720L Connecting screw fittings with Eurocone raw 3/4" - 20 x 2 MU087500726L Connecting screw fittings with Eurocone raw 3/4" - 26 x 3 MU087501026L Connecting screw fittings with Eurocone raw 1" - 26 x 3 MU087600316L Screw connector , flat seal 3/8" - 16 x 2 MU087600516L Screw connector , flat seal 1/2" - 16 x 2 MU087600520L Screw connector , flat seal 1/2" - 20 x 2 MU087600716L Screw connector , flat seal 3/4" - 16 x 2 MU087600720L Screw connector , flat seal 3/4" - 20 x 2 MU087600726L Screw connector , flat seal 3/4" - 26 x 3 MU087601026L Screw connector , flat seal 1" - 26 x 3 MU0877016150 Nipples press x compression 16 x 2 - 15 mm MU0877020220 Nipples press x compression 20 x 2 - 22 mm MU0877026220 Nipples press x compression 26 x 3 - 22 mm MU0877026280 Nipples press x compression 26 x 3 - 28 mm MU0880005160 Female Coupling 1/2" - 16 x 2 MU0880005200 Female Coupling 1/2" - 20 x 2 MU0880005260 Female Coupling 1/2" - 26 x 2 MU0880007160 Female Coupling 3/4" - 16 x 2 MU0880007200 Female Coupling 3/4" - 20 x 2 MU0880007260 Female Coupling 3/4" - 26 x 3 MU0880010260 Female Coupling 1" - 26 x 3 MU0881000160 Stop end 16 x 2 MU0881000200 Stop end 20 x 2 MU0881000260 Stop end 26 x 3 MU0883005160 Female screw fitting, flat seal 1/2" - 16 x 2 MU0883005200 Female screw fitting, flat seal 1/2" - 20 x 2 MU0883007160 Female screw fitting, flat seal 3/4" - 16 X 2 MU0883007200 Female screw fitting, flat seal 3/4" - 20 x 2 MU0883007260 Female screw fitting, flat seal 3/4" - 26 x 3 MU0883010260 Female screw fitting, flat seal 1" - 26 x 3 MU0884005160 Wallplate elbow U-shaped 180°16 x 2 - 1/2” MU0884005200 Wallplate elbow U-shaped 180°20 x 2 - 1/2” MU0886I20220 Nipples press + insert x compression 20 x 2 - 22 mm MU0886I26220 Nipples press + insert x compression 26 x 3 - 22 mm MU0886026220 Nipples press + insert x compression 26 x 3 - 22 mm MU0886016120 Nipples press + insert x compression 16x2 - 12 mm MU0886016150 Nipples press + insert x compression 16 x 2 - 15 mm MU0886020220 Nipples press + insert x compression 20 x 2 - 22 mm MU0887005160 Wallplate elbow U-shaped 16 x 2 - 1/2” - 16 x 2 MU0887005200 Wallplate elbow U-shaped 20 x 2 - 1/2” - 20 x 2 MU0888000160 Tee By-pass 16 x 16 x 16 MU088800BAA0 Tee By-pass 20 x 16 x 16 MU088800BAB0 Tee By-pass 20 x 16 x 20 MU0888000200 Tee By-pass 20 x 20 x 20 MU0891005160 Disaligned fittings 16 x 2 - 1/2” F 16 x 2 MU0891005200 Disaligned fittings 20 x 2 - 1/2” F 20 x 2 MU0892003160 Press elbow swivel nut MU0892005160 Press elbow swivel nut MU0892005200 Press elbow swivel nut MU0892007160 Press elbow swivel nut MU0892007200 Press elbow swivel nut MU0892007260 Press elbow swivel nut MU0892010260 Press elbow swivel nut VA0844000160 Quick press connection (2 pieces) 16 x 2 VA0844000200 Quick press connection (2 pieces) 20 x 2 Screw fittings RM055000016N Tee 16 x 2 RM055000X16N Tee 16 x 2 RM055000020N Tee 20 x 2 RM055000026N Tee 26 x 3 RM055100516N Male Tee 16 x 2 - 1/2” - 16 x 2 RM055100716N Male Tee 16 x 2 - 3/4” - 16 x 2 RM055100720N Male Tee 20 x 2 - 3/4” - 20 x 2 RM055100726N Male Tee 26 x 3 - 3/4” - 26 x 3 RM055101026N Male Tee 26 x 3 - 1” - 26 x 3 RM055200516N Female Tee 16 x 2 - 1/2” - 16 x 2 RM05520X516N Female Tee 16 x 2 - 1/2” - 16 x 2 RM055200520N Female Tee 20 x 2 - 1/2” - 20 x 2 RM055200716N Female Tee 16 x 2 - 3/4” - 16 x 2 RM055200720N Female Tee 20 x 2 - 3/4” - 20 x 2 RM055200726N Female Tee 26 x 3 - 3/4” - 26 x 3 RM055201026N Female Tee 26 x 3 - 1” - 26 x 3 RM055300ABAN Reducing Tee 16 x 2 - 20 x 2 - 16 x 2 RM055300BAAN Reducing Tee 20 x 2 - 16 x 2 - 16 x 2 RM055300BABN Reducing Tee 20 x 2 - 16 x 2 - 20 x 2 RM055300BBAN Reducing Tee 20 x 2 - 20 x 2 - 16 x 2 RM055300DADN Reducing Tee 26 x 3 - 16 x 2 - 26 x 3 RM055300DBDN Reducing Tee 26 x 3 - 20 x 2 - 26 x 3 RM056000016N Elbow 90° 16 x 2 RM056000X16N Elbow 90° 16 x 2 RM056000020N Elbow 90° 20 x 2 RM056000026N Elbow 90° 26 x 3 RM0560R2016N Elbow 90° reduction 20 x 2 - 16 x 2 RM056100516N Male elbow 90° 1/2" 16x2 RM05610X516N Male elbow 90° 1/2" 16x2 RM056100520N Male elbow 90° 1/2" 20x2 RM056100716N Male elbow 90° 3/4" 16 x 2 RM056100720N Male elbow 90° 3/4" 20 x 2 RM056100726N Male elbow 90° 3/4" 26 x 3 RM056101026N Male elbow 90° 1" 26 x 3 RM056200516N Female elbow 90° 1/2" - 16 x 2 RM05620X516N Female elbow 90° 1/2" - 16 x 2 RM056200520N Female elbow 90° 1/2" - 20 x 2 RM056200716N Female elbow 90° 3/4" - 16 x 2 RM056200720N Female elbow 90° 3/4" - 20 x 2 RM056200726N Female elbow 90° 3/4" - 26 x 3 RM056201026N Female elbow 90° 1" - 26 x 3 RM056300516N Elbow with wallplate 90° 1/2" - 16 x 2 RM05630X516N Elbow with wallplate 90° 1/2" - 16 x 2 RM056300520N Elbow with wallplate 90° 1/2" - 20 x 2 RM056300716N Elbow with wallplate 90° 3/4" - 16 x 2 RM056300720N Elbow with wallplate 90° 3/4" - 20 x 2 RM057000016N Straight coupling 16 x 2 RM057000X16N Straight coupling 16 x 2 RM057000020N Straight coupling 20 x 2 RM057000026N Straight coupling 26 x 3 RM0570R2016N Straight reduction 20 x 2 - 16 x 2 RM057100516N Male straight coupling ISO 7/2 1/2" - 16 x 2 RM05710X516N Male straight coupling ISO 7/2 1/2" - 16 x 2 RM057100520N Male straight coupling ISO 7/2 1/2" - 20 x 2 RM057100716N Male straight coupling ISO 7/2 3/4" - 16 x 2 RM057100720N Male straight coupling ISO 7/2 3/4" - 20 x 2 RM057100726N Male straight coupling ISO 7/2 3/4" - 26 x 3 RM057101026N Male straight coupling ISO 7/2 1" - 26 x 3 RM057200516N Male straight coupling with O-Ring seal 1/2" - 16 x 2 RM05720X516N Male straight coupling with O-Ring seal 1/2" - 16 x 2 RM057200520N Male straight coupling with O-Ring seal 1/2" - 20 x 2 RM058000516N Female straight coupling 1/2" - 16 x 2 RM05800X516N Female straight coupling 1/2" - 16 x 2 RM058000520N Female straight coupling 1/2" - 20 x 2 RM058000716N Female straight coupling 3/4" - 16 x 2 RM058000720N Female straight coupling 3/4" - 20 x 2 RM058000726N Female straight coupling 3/4" - 26 x 3 RM058001026N Female straight coupling 1" - 26 x 3 RM058100016N Pressure test plugs 16 x 2 RM058100020N Pressure test plugs 20 x 2 RM058100026N Pressure test plugs 26 x 3 Pipes 8780201 PIPE EVO 16X2 100M 16 X 2 Naked pipe DN16, 100m 8780202 PIPE EVO 16X2 200M 16 X 2 Same above, 200m 8780205 PIPE EVO 16X2 500M 16 X 2 Same above, 500m 8780199 PIPE EVO 20X2 100M 20 X 2 Naked pipe DN20, 100m TU0MX202000B PIPE EVO 6MM BLUE 20X2 50M 20 X 2 In blue protection, DN20, 50m 8780207 PIPE EVO 6MM BLUE 16X2 50M 16 X 2 In blue protection, DN16, 50m 8780226 PIPE EVO 6MM BLUE 16X2 100M 16 X 2 In blue protection, DN16, 100m TU0MX202000R PIPE EVO 6MM RED 20X2 50M 20 X 2 In red protection, DN20, 50m 8780208 PIPE EVO 6MM RED 16X2 50M 16 X 2 In red protection, DN16, 50m 8780225 PIPE EVO 6MM RED 16X2 100M 16 X 2 In red protection, DN16, 100m 8780200 PIPE EVO 6MM GREEN 20X2 50M 20 X 2 In green protection, DN20, 50m 8780206 PIPE EVO 6MM GREEN 16X2 50M 16 X 2 In green protection, DN16, 50m TU0MX2630000 PIPE EVO 26X3 50M 26 X 3 Naked pipe DN20, 50m TU0MX263000V PIPE EVO 6MM GREEN 26X3 50M 26 X 3 In green protection, DN26, 50m TU0MX263000B PIPE EVO 6MM BLUE 26X3 50M 26 X 3 In blue protection, DN26, 50m TU0MX263000R PIPE EVO 6MM RED 26X3 50M 26 X 3 In red protection, DN26, 50m Pipe EVO = name of the pipes 6MM RED (or Green or BLUE) = if present in the code it means that there is an external sheath for the pipes. If not present it’s naked pipes 50 (or 100, 200, 500) M = is the length of the coil 16x2 (or 20x2, 26x3) = is the dimension and thickness of pipe
Product Images

Approval Holder:
Comisa S.p.A
Company Name
Comisa S.p.A
Address
Via Neziole,27 Pisogne (BS)
Postcode
25055
Country
Italy
Phone
+39 0364 896861
General Email
info@comisa.it

View All Listings by this Company
Manufacturer:
Comisa S.p.A
Company Name
Comisa S.p.A
Address
Via Neziole,27 Pisogne (BS)
Postcode
25055
Country
Italy
Phone
+39 0364 896861
General Email
info@comisa.it

View All Listings by this Company

Print This Approval


#241101701

Dudley Quantum single flush push button WC syphon. The syphon is operated via a top mounted cistern push button. For cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
241101701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
2” BSP (M) Outlet
Marking:
Dudley and Quantum moulded on syphon body.
Installation Requirements:
R001 R571
Expiry date:
30/11/2029
Model:
Dudley Quantum Single Flush Syphon

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250201701

Dudley Cascade Plus dual flush WC syphon flushing apparatus with a plastic body and stainless-steel link for use with WC flushing cisterns.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
250201701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½” Outlet, Syphon heights 7” to 11”
Marking:
Cascade + and Thomas Dudley Ltd or Cronex (Cronex is a brand name of Cronexrabo which is a subsidiary company of Thomas Dudley Limited) on cap.
Installation Requirements:
R001 R556
Expiry date:
28/02/2030
Model:
Dudley Cascade Plus

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#250304702

Dual flush WC syphon, with a polypropylene body and stainless-steel link for use with WC flushing cisterns. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not be verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
250304702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½” BSP (M)
Marking:
ING & AS01 on body
Installation Requirements:
R001 R571 R582
Expiry date:
31/03/2030
Model:
AS01 syphon flush valve
Product Images

Manufacturer:
Xiamen Ing Sanitary Fittings Ltd
Company Name
Xiamen Ing Sanitary Fittings Ltd
Address
3/F, No.397, West Jinyuan 2nd Road, Jimei District, Xiamen , China
Country
China

View All Listings by this Company

Print This Approval


#250304718

Range of combined storage and booster sets, incorporating a cold-water storage cistern, submersible pump, solenoid valve or alternative actuated ball valve, non-return valve (not suitable for backflow protection), isolation valves and expansion vessel. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250304718
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1” BSP (F)
Marking:
Dutypoint, model & product info on label.
Installation Requirements:
R001 R415
Expiry date:
31/03/2030
Model:
Dutypoint Systems ScubaTANK range comprising of models: ‘ WX A BBBB CCC’ – where: ‘A’ denotes number of pumps and is replaced with 1 or 2. ‘BBBB’ denotes pump size and is replaced with 3040, 3060, 3080, 3100, 5040, 5060, 5080, 5100, 9040, 9060 or 9090. ‘CCC’ denotes size of storage cistern in litres and is replaced with 175, 300, 375, 440, 490, 490, 575, 650, 750, 800, 1050, 1250, 1650 or 2250.
Product Images

Manufacturer:
Dutypoint Ltd.
Company Name
Dutypoint Ltd.
Address
Unit A, Quedgeley West Business Park, Hardwicke, Gloucester
Postcode
GL2 4PA
Country
United Kingdom
Phone
01452313334

View All Listings by this Company

Print This Approval


#240202718

Range of side or bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow regulator. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240202718
Size:
1/2” BSP (M)
Marking:
Flomasta, BS1212-4 & model on body
Installation Requirements:
R001 R550 R560
Expiry date:
28/02/2029
Model:
C10042207 – Side entry fill valve C10042206 – Bottom entry fill valve

Approval Holder:
Kingfisher International Products B.V
Company Name
Kingfisher International Products B.V
Address
Rapenburgerstraat 175E, 1011 VM Amsterdam
Country
Netherlands

View All Listings by this Company

Print This Approval


#240202719

Range of side or bottom entry BS1212-4 (2016) compact type float operated valve for WC flushing cisterns. The inlet incorporates a flow regulator. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240202719
Size:
1/2” BSP (M)
Marking:
Flomasta & Model on body.
Installation Requirements:
R001 R550 R560
Expiry date:
28/02/2029
Model:
C10042206 – Bottom entry fill valve C10042207 – Side entry fill valve

Approval Holder:
Kingfisher International Products Ltd.
Company Name
Kingfisher International Products Ltd.
Address
3 Sheldon Square Paddington, London
Postcode
W2 6PX

View All Listings by this Company

Print This Approval


#240402705

Range of bottom and side entry BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, delayed or non-delayed fill. The inlet incorporates a strainer. Maximum working pressure - 10 Bar Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240402705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” & ½” BSP (M)
Marking:
BS1212-4, Anboly logo and datum level on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/04/2029
Model:
ABL-2053 ABL-2145
Product Images

Approval Holder:
GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD
Company Name
GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD
Address
Weichi Park, Huangcuowei Village, Dongfeng Town, Chao’an District, Chaozhou City, Guangdong Province
Country
China
Phone
+86 0768-5388845
General Email
annie_lu0515@163.com

View All Listings by this Company
Manufacturer:
GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD
Company Name
GUANGDONG ANBOLY SANITARY TECHNOLOGY CO ., LTD
Address
Weichi Park, Huangcuowei Village, Dongfeng Town, Chao’an District, Chaozhou City, Guangdong Province
Country
China
Phone
+86 0768-5388845
General Email
annie_lu0515@163.com

View All Listings by this Company

Print This Approval


#240502717

Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, bottom or side entry type with brass ½’’ or ¾” BSP inlet. The inlet incorporates a strainer, models incorporate a delay fill function. The bottom entry valves are height adjustable. Maximum working pressure - 10 Bar, Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240502717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models.
Marking:
Viva, BS1212-4 and Datum level on body
Installation Requirements:
R001 R550 R560 R562
Expiry date:
31/05/2029
Model:
SKYAIR01 with ½” BSP (M) SKYAIR02 with ½” BSP (M) SKYAIR03 with ¾” BSP (M) SKYAIR04 with ¾” BSP (M)
Product Images

Approval Holder:
Mercantile Ventures Ltd ta Viva Sanitary
Company Name
Mercantile Ventures Ltd ta Viva Sanitary
Address
Units 1-3 Capitol Trading Park Liverpool
Postcode
L33 7SY
Country
United Kingdom
General Email
allan.hanson@vivasanitary.co.uk

View All Listings by this Company

Print This Approval


#240704722

Side entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240704722
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
BSP1/2” (M) Plastic, BSP1/2” (M) Brass, BSP3/8” (M) Brass
Marking:
R&T, model & BS1212-4 on body
Installation Requirements:
R001 R550 R560
Expiry date:
31/07/2029
Model:
A1423
Product Images

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company

Print This Approval


#2109073

BS1212-4 (2016) compact type float operated valve for WC flushing cisterns, side entry type. The inlet incorporates a plastic flow restrictor. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
2109073
Size:
½” BSP (M) 3/8” BSP (M)
Marking:
UNISANI, BS1212-4 & model on body
Installation Requirements:
R001 R550
Expiry date:
30/09/2026
Model:
BWA1200

Approval Holder:
UNISANI (XIAMEN) TECHNOLOGY CO., LTD
Company Name
UNISANI (XIAMEN) TECHNOLOGY CO., LTD
Address
Unit 1204, No.496, Xinglinwan Road, Jimei District, Xiamen
Country
China

View All Listings by this Company

Print This Approval


#240904722

Bottom entry A1370A and side entry A1423B BS1212-4 (2016) compact type float operated valves for WC flushing cisterns. The inlet incorporates a strainer. A1270A - plastic or brass connector. A1423B - plastic connector only. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
240904722
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
R&T, model & BS1212-4 & datum level on body.
Installation Requirements:
R001 R550 R560
Expiry date:
30/09/2029
Model:
A1370A 13½” A1370A 11½” A1423B
Product Images

Approval Holder:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company
Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422
General Email
rt025@rtplumbing.com

View All Listings by this Company

Print This Approval


#250104701

Bottom entry BS1212-4 (2016) compact type float operated valves for use with WC flushing cisterns. The inlet incorporates a strainer. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250104701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (M) Plastic 1/2” BSP (M) Brass 3/8” BSP (M) Brass
Marking:
R&T, model & BS1212-4 on body
Installation Requirements:
R001 R550 R560
Expiry date:
31/01/2030
Model:
A1370 13½” A1370 11½” A1370 10”

Manufacturer:
Xiamen R&T Plumbing Technology Co.,Ltd
Company Name
Xiamen R&T Plumbing Technology Co.,Ltd
Address
No.18, Houxiang Road Haicang District Xiamen
Postcode
361022
Country
China
Phone
86-0592-3959422

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 4 of 5

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.