Range of press fit fittings incorporating copper (GP5 models) or bronze (GP4 models) bodies and EPDM `O`-rings, for use with copper tube to EN 1057. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2106017

Marking:

Taizhou Double Winner logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2026

Model:

GP5002 Bend 90: 12 - 54mm. GP5001 Bend 90 i/a: 12 - 54mm. GP5041 Bend 45: 12 - 54mm. GP5040 Bend 45 i/a: 12 - 54mm. GP5270 Straight Coupling: 12 - 54mm. GP5271 Straight Coupling: 12 - 54mm. GP5270S Sleeve Coupling: 12 - 54mm. GP5240 Reducing Coupling: 12 - 54mm. GP5243 Fitting Reducer: 12 - 54mm. GP5130 Equal Tee: 12 - 54mm. GP5301 Cap End: 12 - 54mm. GP5130 Reducing Tee: 12 - 54mm. GP5085 Full Crossover: 15 - 22mm. GP5086 Part Crossover: 15 - 22mm. GP4090 Elbow 90 Female: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4471 Wallplate Elbow: 15mm x 1/2” BSP (M) - 22mm x 3/4” BSP (M) GP4092 Elbow 90 Male: 15mm x 1/2” BSP (M) - 54mm x 2” BSP (M). GP4355 Tap Connector: 15mm x 1/2” BSP Captive Nut - 28mm x 1 1/4” BSP Captive Nut. GP4270 Female Adaptor: 15mm x 1/2” BSP (F) - 54mm x 2” BSP (F). GP4243 Male Adaptor: 15mm x 1/2” BSP (M) - 54mm (Crimp Joint) x 2” BSP (M). GP4130 Threaded Tee: 15mm x 1/2” BSP (M) x 15mm - 54mm x 1/2” BSP (M) x 54mm. GP4331 Straight Union: 15mm x 1/2” BSP (M) - 28mm x 1” BSP (M). GP4281 Female Adaptor: 15mm x 1/2” BSP (F) - 22mm x 3/4” BSP (F).

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

Room 902, No.185-1 Wenxue Road, Jiazhi Street, Jiaojiang, Taizhou, Zhejiang

Postcode

31800

Country

China

General Email

info@double‐winners.com

View All Listings by this Company

>B< Press range of stainless-steel SUS316L fittings for use with 316L stainless steel tube manufactured to EN10312. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201312

Size:

Please refer to model.

Marking:

Conex logo (B) and size on body

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

PS4001G – Male Bend PS4001G0150400 – 15 x ½” PS4001G0180400 – 18 x ½” PS4001G0180600 – 18 x ¾” PS4001G0220600 – 22 x ¾” PS4001G0280800 – 28 x 1” PS4001G0351000 – 35 x 1-1/4” PS4001G0421200 – 42 x 1-1/2” PS4001G0541600 – 54 x 2” PS4002G – Female Bend PS4002G0150400 – 15 x ½” PS4002G0180400 – 18 x ½” PS4002G0180600 – 18 X ¾” PS4002G0220600 – 22 x ¾” PS4002G0280800 – 28 x 1” PS4002G0351000 – 35 x 1-1/4” PS4002G0421200 – 42 x 1-1/2” PS4002G0541600 – 54 x 2” PS4090G – Female Street Elbow PS4090G0150400 – 15 x ½” PS4090G0180400 – 18 x ½” PS4090G0220400 – 22 x ½” PS4090G0220600 – 22 x ¾” PS4090G0280800 – 28 x 1” PS4090G0351000 – 35 x 1-1/4” PS4092G – Male Elbow 90° PS4092G0150400 – 15 x ½” PS4092G0180400 – 18 x ½” PS4130G – Female Tee PS4130G0150415 – 15 x 15 x ½” PS4130G0180418 – 18 x 18 x ½” PS4130G0180618 – 18 x 18 x ¾” PS4130G0220422 – 22 x 22 x ½” PS4130G0220622 – 22 x 22 x ¾” PS4130G0280428 – 28 x 28 x ½” PS4130G0280628 – 28 x 28 x ¾” PS4130G0280828 – 28 x 28 x 1” PS4130G0350435 – 35 x 35 x ½” PS4130G0350635 – 35 x 35 x ¾” PS4130G0351035 – 35 x 35 x 1-1/4” PS4130G0420442 – 42 x 42 x ½” PS4130G0420642 – 42 x 42 x ¾” PS4130G0540454 – 54 x 54 x ½” PS4130G0540654 – 54 x 54 x ¾” PS4130G0541654 – 54 x 54 x 2” PS4130G0760676 – 76 x 76 x ¾” PS4130G0761676 – 76 x 76 x 2” PS4130G0890689 – 89 x 89 x ¾” PS4130G0891689 – 89 x 89 x 2” PS4130G10806108 – 108 x 108 x ¾” PS4130G10816108 – 108 x 108 x 2” PS4243G – Male Straight Connector PS4243G0150400 – 15 x ½” PS4243G0180400 – 18 x ½” PS4243G0180600 – 18 x ¾” PS4243G0220400 – 22 x ½” PS4243G0220600 – 22 x ¾” PS4243G0220800 – 22 x 1” PS4243G0280600 – 28 x ¾” PS4243G0280800 – 28 x 1” PS4243G0351000 – 35 x 1-1/4” PS4243G0421200 – 42 x 1-1/2” PS4243G0541600 – 54 x 2” PS4243G0762000 – 76 x 2-1/2” PS4243G0892400 – 89 x 3” PS4243G1083200 – 108 – 4” PS4270G – Female Straight Connector PS4270G0150400 – 15 x ½” PS4270G0180400 – 18 x ½” PS4270G0180600 – 18 x ¾” PS4270G0220400 – 22 x ½” PS4270G0220600 – 22 x ¾” PS4270G0220800 – 22 x 1” PS4270G0280600 – 28 x ¾” PS4270G0280800 – 28 x 1” PS4270G0351000 – 35 x 1-1/4” PS4270G0421200 – 42 x 1-1/2” PS4270G0541600 – 54 x 2” PS4270G0762000 – 76 x 2-1/2” PS4270G0892400 – 89 x 3” PS4275 – Slip Coupler PS4275 0150000 – 15MM PS4275 0180000 – 18MM PS4275 0220000 – 22MM PS4275 0280000 – 28MM PS4275 0350000 – 35MM PS4275 0420000 – 42MM PS4275 0540000 – 54MM PS4275 0760000 – 76MM PS4275 0890000 – 89MM PS4275 1080000 – 108MM PS4330G – Female Straight Adaptor PS4330G0150400 – 15 x ½” PS4330G0150600 – 15 x ¾” PS4330G0180400 – 18 x ½” PS4330G0180600 – 18 x ¾” PS4330G0220600 – 22 x ¾” PS4330G0220800 – 22 x 1” PS4330G0280800 – 28 x 1” PS4330G0351000 – 35 x 1-1/4” PS4330G0421200 – 42 x 1-1/2” PS4330G0541600 – 54 x 2” PS4331G – Male Straight Adaptor PS4331G0150400 – 15 x ½” PS4331G0180400 – 18 x ½” PS4331G0220600 – 22 x ¾” PS4331G0280800 – 28 x 1! PS4331G0351000 – 35 x 1-1/4” PS4331G0421200 – 42 x 1-1/2” PS4331G0541600 – 54 x 2” PS4355 – Flat Face Union PS4355 0150600 – 15 x ¾” PS4355 0180600 – 18 x ¾” PS4355 0220600 – 22 x ¾” PS4355 0220800 – 22 x 1” PS4355 0280800 – 28 x 1” PS4355 0281000 – 28 x 1-1/4” PS4355 0351200 – 35 x 1-1/2” PS4471G – Wallplate Elbow PS4471G0150400 – 15 x ½” PS4471G0180400 – 18 x ½” PS4471G0220600 – 22 x ¾” PS4471G0280800 – 28 x 1” PS5001 – Street Bend PS5001 0150000 – 15MM PS5001 0180000 – 18MM PS5001 0220000 – 22MM PS5001 0280000 – 28MM PS5001 0350000 – 35MM PS5001 0420000 – 42MM PS5001 0540000 – 54MM PS5001 0760000 – 76MM PS5001 0890000 – 89MM PS5002 – Bend PS5002 0150000 – 15MM PS5002 0180000 – 18MM PS5002 0220000 – 22MM PS5002 0280000 – 28MM PS5002 0350000 – 35MM PS5002 0420000 – 42MM PS5002 0540000 – 54MM PS5002 0760000 – 76MM PS5002 0890000 – 89MM PS5002 1080000 – 108MM PS5030 – 90 Street Bend PS5030 0150000 – 15MM PS5030 0180000 – 18MM PS5030 0220000 – 22MM PS5030 0280000 – 28MM PS5030 0350000 – 35MM PS5030 0420000 – 42MM PS5030 0540000 – 54MM PS5040 – 45 Street Bend PS5040 0150000 – 15MM PS5040 0180000 – 18MM PS5040 0220000 – 22MM PS5040 0280000 – 28MM PS5040 0350000 – 35MM PS5040 0420000 – 42MM PS5040 0540000 – 54MM PS5040 0760000 – 76MM PS5040 0890000 – 89MM PS5040 1080000 – 108MM PS5041 – Obtuse Bend PS5041 0150000 – 15MM PS5041 0180000 – 18MM PS5041 0220000 – 22MM PS5041 0280000 – 28MM PS5041 0350000 – 35MM PS5041 0420000 – 42MM PS5041 0540000 – 54MM PS5041 0760000 – 76MM PS5041 0890000 – 89MM PS5041 1080000 – 108MM PS5087 – Cross Short PS5087 0150000 – 15MM PS5087 0180000 – 18MM PS5087 0220000 – 22MM PS5087 0280000 – 28MM PS5130 – Equal Tee PS5130 0151515 – 15MM PS5130 0181818 – 18MM PS5130 0222222 – 22MM PS5130 0282828 – 28MM PS5130 0353535 – 35MM PS5130 0424242 – 42MM PS5130 0545454 – 54MM PS5130 0767676 – 76MM PS5130 0898989 – 89MM PS5130 10800EQ – 108MM PS5130 – Reduced Branch Tee PS5130 0181518 – 18 x 15 x 18 PS5130 0221522 – 22 x 15 x 22 PS5130 0221822 – 22 x 18 x 22 PS5130 0281528 – 28 x 15 x 28 PS5130 0281828 – 28 x 18 x 28 PS5130 0282228 – 28 x 22 x 28 PS5130 0351535 – 35 x 15 x 35 PS5130 0351835 – 35 x 18 x 35 PS5130 0352235 – 35 x 22 x 35 PS5130 0352835 – 35 x 28 x 35 PS5130 0422242 – 42 x 22 x 42 PS5130 0422842 – 42 x 28 x 42 PS5130 0423542 – 42 x 35 x 42 PS5130 0542254 – 54 x 22 x 54 PS5130 0542854 – 54 x 28 x 54 PS5130 0543554 – 54 x 35 x 54 PS5130 0544254 – 54 x 42 x 54 PS5130 0762276 – 76 x 22 x 76 PS5130 0762876 – 76 x 28 x 76 PS5130 0763576 – 76 x 35 x 76 PS5130 0764276 – 76 x 42 x 76 PS5130 0765476 – 76 x 54 x 76 PS5130 0892289 – 89 x 22 x 89 PS5130 0892889 – 89 x 28 x 89 PS5130 0893589 – 89 x 35 x 89 PS5130 0894289 – 89 x 42 x 89 PS5130 0895489 – 89 x 54 x 89 PS5130 0897689 – 89 x 76 x 89 PS5130 10822108 – 108 x 22 x 108 PS5130 10828108 – 108 x 28 x 108 PS5130 10835108 – 108 x 35 x 108 PS5130 10842108 – 108 x 42 x 108 PS5130 10854108 – 108 x 54 x 108 PS5130 10876108 – 108 x 76 x 108 PS5130 10889108 – 108 x 89 x 108 PS5230D – Flange Adapter PS5230D0760000 – 76MM PS5230D0890000 – 89MM PS5230D1080000 – 108MM PS5243 – Fitting Reducer PS5243 0181500 – 18 x 15 PS5243 0221500 – 22 x 15 PS5243 0221800 – 22 x 18 PS5243 0281500 – 28 x 15 PS5243 0281800 – 28 x 18 PS5243 0282200 – 28 x 22 PS5243 0351800 – 35 x 18 PS5243 0352200 – 35 x 22 PS5243 0352800 – 35 x 28 PS5243 0422800 – 42 x 28 PS5243 0423500 – 42 x 35 PS5243 0542800 – 54 x 28 PS5243 0543500 – 54 x 35 PS5243 0544200 – 54 x 42 PS5243 0764200 – 76 x 42 PS5243 0765400 – 76 x 54 PS5243 0894200 – 89 x 42 PS5243 0895400 – 89 x 54 PS5243 0897600 – 89 x 76 PS5243 1085400 – 108 x 54 PS5243 1087600 – 108 x 76 PS5243 1088900 – 108 x 89 PS5270 – Coupler PS5270 0150000 – 15MM PS5270 0180000 – 18MM PS5270 0220000 – 22MM PS5270 0280000 – 28MM PS5270 0350000 – 35MM PS5270 0420000 – 42MM PS5270 0540000 – 54MM PS5270 0760000 – 76MM PS5270 0890000 – 89MM PS5270 1080000 – 108MM PS5301 – Stop End PS5301 0150000 – 15MM PS5301 0180000 – 18MM PS5301 0220000 – 22MM PS5301 0280000 – 28MM PS5301 0350000 – 35MM PS5301 0420000 – 42MM PS5301 0540000 – 54MM PS5301 0760000 – 76MM PS5301 0890000 – 89MM PS5301 1080000 – 108MM

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

ZK International Group

Company Name

ZK International Group

Address

NO.678 Dingxiang Road, Binhai Garden,Economic and Technological Development Zone, Wenzhou, Zhejiang

Country

China

General Email

View All Listings by this Company

Turbo 44R dual flush syphonic flushing apparatus with a polypropylene body and stainless steel link for use with WC flushing cisterns.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2202901

Size:

1½” Outlet, Syphon heights 8” to 12”.

Marking:

TURBO 44-R 2-PART SYPHON on top of valve body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

Turbo 44R Syphon

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Copper brazed micro plate heat exchanger with copper and stainless-steel (316/1.4401) plates. Maximum working pressure 25.0 Bar. Maximum operating temperature 100°C

Section:

1350 Heat Exchangers

Size:

¾” BSP (M)

Marking:

Danfoss company logo, model name, maximum temperature and pressure, date of manufacture (YYYY-MM-DD) and other technical infomation on adhesive label on front of heat exchanger.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

XB06

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Manufacturer:

Danfoss Trata d.o.o.

Company Name

Danfoss Trata d.o.o.

Address

Joezeta Jame 16, SI-1210 Ljubljana Sentvid Slovenia

General Email

View All Listings by this Company

Range of plate heat exchanger with stainless steel bodies. Maximum working pressure10 bar. Maximum operating temperature 100°C.

Section:

1350 Heat Exchangers

Size:

½”BSP(M) secondary x ¾”BSP(M) primary Ø 16mm holes on inlets and outlets

Marking:

G20 Engineering logo, model number, production date WW/YY etched on body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

Plate heat exchanger – Type PEP15440A01 (with insert M5) PEP15440A01-20 PEP15440A01-18 PEP15440A01-16 PEP15440A01-14 PEP15440A01-12 PEP15440A01-10 Plate heat exchanger – Type PEP15440B01 (with 2 G ½’ fitting and 2 G ¾’ fitting) PEP15440B01-20 PEP15440B01-18 PEP15440B01-16 PEP15440B01-14 PEP15440B01-12 PEP15440B01-10

Approval Holder:

G20 ENGINEERING s.r.l.

Company Name

G20 ENGINEERING s.r.l.

Address

Localita Campogrande 13- 29013 Carpaneto P.no (PC)

Country

Italy

View All Listings by this Company

Range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger and pressure relief valve set at 3.0 bar. The supplies to both primary hot water and secondary are controlled via spherical valves. The boilers incorporate a filling loop assembly which incorporates a double check valve assembly (suitable for backflow protection against Fluid Category 3). Primary circuit: Maximum working pressure 2.5 bar. Maximum operating temperature 82°C. Secondary circuit: Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2110320

Size:

22mm compression

Marking:

Worcester (brand of Bosch) on front of boiler. Worcester, address, model, serial No. & other tech info on adhesive label on inside of panel.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

Greenstar Highflow range comprising of model numbers: 7 731 600 098 (model code: 440CDi ErP). 7 731 600 099 (440CDi ErP). 7 731 600 100 (550CDi ErP). 7 731 600 101 (550CDi ERP).

Approval Holder:

Worcester Bosch

Company Name

Worcester Bosch

Address

Cotswold Way Warndon Worcester

Postcode

WR4 9SW

Country

United Kingdom

Phone

+44 1905 752761

General Email

ian.sharp@uk.bosch.com

View All Listings by this Company

Manufacturer:

Worcester Bosch

Company Name

Worcester Bosch

Address

Cotswold Way Warndon Worcester

Postcode

WR4 9SW

Country

United Kingdom

Phone

+44 1905 752761

General Email

ian.sharp@uk.bosch.com

View All Listings by this Company

(Jet) range of water meters with either ductile iron (171259 & 171279 models) or brass (all other models) blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Size:

see model

Marking:

JET & technical info on dial. Flow arrow & size on body.

Installation Requirements:

R001 R120

Expiry date:

31/12/2026

Model:

171243, 171253 & 171273 – ¾” BSP (M). 171244, 171254 & 171274 – 1” BSP (M). 171255, 171275 & 171256 – 1 ¼” BSP (M). 171256 & 171276 – 1 ½” BSP (M). 171257 & 171277 – 2” BSP (M). 171258 & 171278 – 2 ½” BSP (M). 171259 & 171279 – DN50 flange.

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of water meter couplings with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only

Section:

1530 Miscellaneous Fittings

Size:

See model

Marking:

Arad group on nut. Date of manufacture (clock format MM YY) on body.

Installation Requirements:

R001 R001

Expiry date:

31/05/2026

Model:

Polymer Coupling set 1'' BSP - 62525509 Polymer Coupling set 1'' BSP 62525609 Polymer swivel Coupling set 1.5'' BSP 64041009 Polymer swivel Coupling set 1.5'' NPT 64041010 Polymer Coupling set 1.5'' BSP- 64043009 Polymer Coupling set 1.5'' NPT - 64044009 Polymer Coupling set 2'' BSP- 65051009 Polymer Coupling set 2'' NPT- 65051010

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Copper corrugated hose. Maximum working pressure 10.0 bar. Maximum working temperature 90°C.

Section:

1530 Miscellaneous Fittings

Size:

See model.

Marking:

Flomasta, WRAS and year of manufacture (YYYY) on body. Models Added December 2023 Flomasta or Kingfisher, WRAS and date of manufacture (YYYY) on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

COPPER CORRUGATED HOSES: 03890158 15MM TUBE X ½” CAPTIVE NUT, 03890165: 15MM TUBE X 15MM TUBE. Models Added December 2023 3342978024433 15mm tube x ½” captive nut. 5059340261133 15mm tube x 15mm tube.

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of pushfit hose connectors with either plastic (white or black) or chrome plated brass bodies and EPDM ‘O’-rings. SHCV prefix models incorporate screwdriver operated servicing valves. All pushfit connections are for use with PEX pipe (manufactured to BS7291-3) and copper pipe (manufactured to EN1057). Barbed end connections are not approved for use with any hose. Chrome plated brass body models are also for use with PB pipe (manufactured to BS7291-2). Maximum working pressure 10.0 bar (servicing valve models only). Barbed end connections are open outlet use only. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2107114

Note:

R008 does not apply to the black models.

Size:

See model - 15-22mm push fit inlet, 10mm & ⅜”-¾” barbed outlet.

Marking:

Twistloc logo: ‘TLC’ (brand of SNC Corporation) and size on fitting body and collet.

Installation Requirements:

R001 R008

Expiry date:

31/07/2026

Model:

SHC61M: 15mm OD x 10mm Barb (White). SHC63M: 15mm OD x 3/8” Barb (White). SHC64M: 15mm OD x 1/2” Barb (White). SHC41M: 22mm OD x 10mm Barb (White). SHC44M: 22mm OD x 1/2” Barb (White). SHC45M: 22mm OD x 3/4” Barb (White). SHC61MBK: 15mm OD x 10mm Barb (Black). SHC63MBK: 15mm OD x 3/8” Barb (Black). SHC64MBK: 15mm OD x 1/2” Barb (Black). SHC41MBK: 22mm OD x 10mm Barb (Black). SHC44MBK: 22mm OD x 1/2” Barb (Black). SHC45MBK: 22mm OD x 3/4” Barb (Black). Models with servicing valves: SHCV45M: 22mm OD x 3/4” Barb (White). SHCV44M: 22mm OD x 1/2” Barb (White). SHCV64M: 15mm OD x 1/2” Barb (White). SHCV63M: 15mm OD x 3/8” Barb (White). SHCV61M: 15mm OD x 10mm Barb (White). SHCV45MBK: 22mm OD x 3/4” Barb (Black). SHCV44MBK: 22mm OD x 1/2” Barb (Black). SHCV64MBK: 15mm OD x 1/2” Barb (Black). SHCV63MBK: 15mm OD x 3/8” Barb (Black). SHCV61MBK: 15mm OD x 10mm Barb (Black). SHCV64BM: 15mm OD x 1/2” Barb (Chrome plated brass). SHCV45BM: 22mm OD x 3/4” Barb (Chrome plated brass).

Approval Holder:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company