Range of piston type float operated inlet valves with brass bodies and backnuts. Maximum working pressure: size for 1/2”- 3/4” 10 bar, size for 1”- 2” 8 bar, size for 2-1/2”- 4” 6 bar. Cold water use only.
Range of non-return valves with bronze bodies and discs. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.
Adjustable, in-line pressure reducing valves with DZR brass bodies. Adjustable between 3.0 bar and 5.0 bar outlet pressure. Compression connections for use with copper pipe to EN1057. Maximum inlet supply pressure 16.0 bar. Maximum operating temperature 85°C.
Range of in-line adjustable pressure reducing valves, with nickel plated DZR brass bodies and stainless-steel strainer. Various models are supplied with a pressure gauge (see model). Compression models are for use with BS EN1057 copper pipe. Maximum working pressure 16.0 Bar. Outlet pressure range: 0.8-6.0 bar. Maximum operating temperature 80°C.
Range of in-line spherical valves with brass or nickel-plated brass bodies (see model), chrome plated ball, PTFE seats and EPDM O-rings. The products are supplied with either a lever operating member, magnetic lockable operating member, red or yellow butterfly handle or short lever operating member (see model). Compression and pressfit connections are for use with PEX/AL/PEX multilayer pipes manufactured to EN ISO 21003. The pressfit connection jointing is achieved via a crimping tool using a ‘U’ or ‘TH’ profile. Maximum working pressures: 255, 256 and 257 models: 20.0 bar, All other models: 16.0 bar. Maximum operating temperatures: 201, 207 and 209 models: 90°C, All other models: cold water only.
Range of spherical valves with nickel-plated brass bodies, chrome plated brass balls, PTFE seat (SD3009 only) and NBR ‘O’-rings. The SD3009 models are screw-driver operated, the SD6011 model incorporate a short lever operating member. The compression connections are for use with copper pipes (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
'AD-96'. White coloured, compression moulded ceramic material. For use with water up to 85°C.
'PROTEGOL UR Coating 32-69 MB'. Factory applied, two-part, blue coloured, Polyurethane coating. Mix parts A and B in a 1:1 volume ratio and apply as per manufacturer's Application Instructions '06/2025'. Cure for 24 hours@23°C until a shore hardness of 70 D is reached. For use with water up to 65°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Rashmi Blast Furnace Slag Cement Mortar'. Factory applied, grey coloured, blast furnace slag cement mortar. Mix cement, sand & water in a mass ratio of 1:1.5:0.6 and apply as per manufacturer's work instructions 'RML/DI/WI/CMLC-10', 'Rev: 02', dated '12.10.2023'. Cure for 120 minutes@50°C, 98% RH. For use with water up to 65°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the materials are not covered by the scope of the approval.
Grivory GV-2H natural & GV-2H black 9915. GV-2 FWA natural & GV-2 FWA black 9225. GV-4H natural & GV-4H black 9915. GV-4 FWA natural & GV-4 FWA black 9225. GV-5H natural & GV-5H black 9915. GV-5 FWA natural, GV-5 FWA black 9225 & Grivory XE 4275 black 9225. GV-6H natural & GV-6H black 9915. GV-6 FWA natural & GV-6 FWA black 9225. Injection moulded, natural (appears white) or black coloured, glass reinforced nylon materials. For use with water up to 23°C.
'Grivory GV XE 10726 Black 9225'. Black coloured, injection moulded, glass reinforced polyamide material. For use with water up 23°C.
Grilamid L 20 H FWA natural & Grilamid L 20 H FWA black 9225. Grilamid L 25 H FWA natural & Grilamid L 25 H FWA black 9225. Injection moulded, natural (appears white) or black coloured, PA materials. For use with water up to 85°C.
'Avaspire AV-651 BK95'. Black coloured, injection moulded PEEK (part of the PAEK family) material. For use with water up to 85°C.
'DURAFIDE® PPS 1140A1 WN9050'. Black coloured, injection moulded PPS material. For use with water up to 85°C.
'5594903 'O' rings'. Black coloured, compression moulded EPDM 'O' rings. Shore hardness 90. Tested in-radii sizes between 0.4mm and 3.65mm. For use with water up to 85°C.
'5594821'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 85°C.
'5594610'. Black coloured, compression moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 85°C.
'5594710'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.
Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AD’ air gap arrangement (verified by test -suitable for backflow prevention against Fluid Category 5). The inlet incorporates a strainer and flow regulator and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10 bar. Cold water supply only.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| GT6002R-D-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6002R-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6024-** | Various | hot/cold water inlet：M8x1, 1/2 BSP(F) Boiling water inlet:M8x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On handle | No | Ceramic cartridge | Metal Backnuts | Aerator | |
| GT6616-** | Various | hot/cold water inlet：M10x1, 1/2 BSP(F) Boiling water inlet:M10x1 | hot/cold water path: 10bar Boiling water path:5bar bar | hot/cold water path: 65℃ Boiling water path: 99℃ °C | GETTAI | On Body | No | Ceramic cartridge | Metal Backnuts | Aerator |
GT6002R-D-** & GT6002R-** only differ in spout Model code: “**” means different finishes -LC Brushed -LE Polished -MOB Matt Black -BK Steel Black -BS PVD Black -GM Gun Metal -CO Copper -GD Gold -TGD Titanium Gold
Page 222 of 223
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
