Re-circulation valve with a plastic body and EPDM O-rings. The product is supplied with a pressure relief valve set at 10.0 bar. Supplied with stainless steel braided EPDM line flexible hoses. Compression connection for use with copper pipe manufactured to BS EN1057. Maximum working pressure 9.5 Bar. Maximum operating temperature 82°C
Range of pull-out spray assemblies with a flexible hose and a self-closing trigger. Maximum working pressure 10.0 bar. Cold water use only.
Range of wall mounted installation kits with brass bodies Maximum working pressure 5.0 bar
Non-metallic materials and components comply with BS6920 at 85°C
Hand shower sets consisting of a wall elbow with brass body (chrome plated), shower hose and handset. The inlet incorporates stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use.
Non-metallic materials and components comply with BS6920 at 60°C
Range of shower heads with brass bodies (various finishes) incorporating EPDM washers with built in strainers. Some models also incorporate flow regulators.
Non-metallic materials and components comply with BS6920 at 85°C
Shower handset with plastic body (with chromium finish), incorporating a trigger mechanism and a plastic flow restrictor at the inlet. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of plastic bodied shower outlets with chromium or titanium plated finish. The inlet of the overhead showers incorporates a combined EPDM washer and stainless steel strainer.
Non-metallic materials and components comply with BS6920 at 60°C
A range of adjustable shower rails (chrome plated brass) with EPDM O-rings.
Non-metallic materials and components comply with BS6920 at 65°C
Drain cock with a plastic body. Maximum working pressure 6.0 bar.
Non-metallic materials and components comply with BS6920 at 75°C
Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic flow straightener (Models 152101, 152102, 179401 &179402) or a plastic aerator (Models 130401 & 130402). The products are supplied with metal backnuts. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C for all models except 179401 & 179402 which are 85°C
Pillar tap (chromium plated brass) incorporating a quarter turn ceramic disc headwork with single lever type headwork. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of pillar taps (chromium plated brass), incorporating quarter turn ceramic disc headworks, available with either cross top (400145 & 400146) or single lever (310802 & 310803) operating members. The spout outlets incorporate a plastic flow straightener and the products are supplied with metal back nuts Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C
Range of metal double interlocked (PVC or PEX lined), PVC spiral or PVC flat shower hoses.
Non-metallic materials and components comply with BS6920 at 85°C
PVC lined flexible hose assembly with corrugated metal outer covers (WR14-01) and a grey nylon braided double-layer hose assembly with PEX inner layer covered with a black PVC outer layer (WR10-01). Open outlet use.
Non-metallic materials and components comply with BS6920 at 65°C
Range of stainless steel braided PEX lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless steel interlocked shower hoses with PVC or PEX inner liner and EPDM washers.
Non-metallic materials and components comply with BS6920 at 65°C
Range of stainless steel braided EPDM lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless-steel braided EPDM lined flexible hose assemblies with a variety of brass end connections (see models). “DN 9.5 ½” compression with ISO valve” model also incorporates a screwdriver operated isolation valve. Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of stainless steel interlocked shower hoses with an EPDM inner liner and EPDM washers.
Non-metallic materials and components comply with BS6920 at 65°C
Range of indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided. Maximum working pressures: Primary: 6.0 bar Secondary: 5.5 bar
Non-metallic materials and components comply with BS6920 at 85°C
Page 212 of 508
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
