“Yonos PARA Z15 and Yonos PARA Z25 ” range of circulation pumps incorporating brass bodies, plastic impellers and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2010368

Size:

1” BSP (M) & 1½” BSP (M).

Marking:

Wilo, model, date of manufacture (YY)W(WW) and other technical information on adhesive label on motor head.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Yonos PARA Z AA BB CCCC DDD EEE FF AA denotes: connection size (15 for 1” or 25 for 1½”). BB denotes; maximum height of flow. CCCC denotes: customer control interface. DDD denotes: pump housing length. EEE denotes: electrical connection FF denotes: box orientation

Product Images

Approval Holder:

WILO INTEC

Company Name

WILO INTEC

Address

50 Avenue Eugene Casella, Aubigny sur nere

Postcode

18700

Country

France

Phone

+332 48 81 62 62

General Email

franck.guillaume@wilo.com

View All Listings by this Company

Manufacturer:

WILO INTEC

Company Name

WILO INTEC

Address

50 Avenue Eugene Casella, Aubigny sur nere

Postcode

18700

Country

France

Phone

+332 48 81 62 62

General Email

franck.guillaume@wilo.com

View All Listings by this Company

Range of single and twin ended shower booster pumps with plastic bodies and plastic impellers. The inlets/outlets incorporate stainless steel braided EPDM lined flexible hose assemblies with isolation valves and stainless steel strainers. The outlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The Universal Twin models incorporate an expansion vessel. Maximum working pressure (See model). Maximum operating temperature 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2007056

Size:

15mm push fit: CT50+XTRA, CT50XTRA, CT54XTRA, CT55+XTRA, CT55XTRA, CT59XTRA, CT75+XTRA, CT75XTRA, CT79XTRA, CT85+XTRA, CT85XTRA, CT89XTRA, CT60B, CT60BU, CT64HUXTRA, CT64HXTRA 21mm push fit: CTFORCE30IPS, CTFORCE30IPT, CTFORCE30ISU, CTFORCE30ITU, CTFORCE15IPT, CTFORCE15ITU, CTFORCE20IPS, CTFORCE20IPT, CTFORCE20ISU, CTFORCE20ITU, CT84HUXTRA, CT84HXTRA 22mm push fit: CTFORCE30PS, CTFORCE30PT, CTFORCE30SU, CTFORCE30TU, ACTFORCE30SU, ACCUFORCE, CTFORCE15PT, CTFORCE15TU, CTFORCE20PT, CTFORCE20PS, CTFORCE20SU, CTFORCE20TU, CT80B, CT80BU

Marking:

Salamander logo (graphical image of a Salamander) at each end of the pump housing. Salamander ID badge at the edge of the junction box. Pump ratings label sticker on top of junction box. Motor ratings label sticker on motor body.

Installation Requirements:

R001 R150 R415

Expiry date:

31/07/2025

Model:

CT50+XTRA, CT50XTRA, CT54XTRA, CT55+XTRA, CT55XTRA, CT59XTRA, CT75+XTRA, CT75XTRA, CT79XTRA, CT85+XTRA, CT85XTRA, CT89XTRA, CT60B, CT60BU, CT64HUXTRA, CT64HXTRA, CT80B, CT80BU, CT84HUXTRA, CT84HXTRA, CTFORCE15IPT, CTFORCE15ITU, CTFORCE15PT, CTFORCE15TU, CTFORCE20IPS, CTFORCE20IPT, CTFORCE20ISU, CTFORCE20ITU, CTFORCE20PT, CTFORCE20PS, CTFORCE20SU, CTFORCE20TU, CTFORCE30IPS, CTFORCE30IPT, CTFORCE30ISU, CTFORCE30ITU, CTFORCE30PS, CTFORCE30PT, CTFORCE30SU, CTFORCE30TU, ACTFORCE30SU, ACCUFORCE. Key: XTRA = Plastic Ended, B = Plastic Ended with Plastic Bypass, H = Plastic Ended with Plastic Bypass (Ireland) FORCE = Brass Ended, A = Manufactured for a separate company, ACCU = Accumulator pump, U = Includes expansion vessel, P = No expansion vessel, T= Twin ended pump, S = Single ended pump, I = sold in Ireland, + = supplied with couplers with isolating valves, The XTRA models without a + come with couplers without isolating valves. The rest of the product ranges include isolating valves as standard. Pressures: 50/54/55/59/15 = 1.5 Bar, 60/64 = 1.8 Bar, 75/79/20 = 2.0 Bar, 85/89 = 2.5 Bar, 80/84 = 2.6 Bar, 30 = 3.0 Bar, ACCUFORCE = 4.0 Bar.

Product Images

Approval Holder:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Manufacturer:

Salamander Pumps

Company Name

Salamander Pumps

Postcode

SR5 3XE

Country

United Kingdom

Phone

0191 535 4528

General Email

lewisw@salamanderpumps.co.uk

View All Listings by this Company

Range of vertical submersible multistage pumps. Cold water use only. Open outlet use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011021

Size:

Suction manifold inlet x 1 ¼” BSP (F) outlet

Marking:

DAB, model and other technical information on body.

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

ESYBOX DIVER 55/120. DTRON3 35/90. DTRON3 45/90. DTRON3 35/120. DTRON2 35/90. DTRON2 45/90. DTRON2 35/120.

Product Images

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Manufacturer:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Range of central heating pumps incorporating polyether sulphone impellers, copper-tin alloy body, carbon graphite axial bearings and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011073

Size:

DN32, DN40, DN50, DN65

Marking:

DAB PUMP S.p.A, model number, date of manufacture and other technical info on adhesive label on body

Installation Requirements:

R001 R415

Expiry date:

30/11/2025

Model:

EVOPLUS B XXX/YYY.ZZ SAN M Where: XXX = Hmax (m); either 40, 60, 80, 100, 120, 150, or 180. YYY = (Centre distance); either 220, 250, 280, or 340. ZZ = Size of flange connection (DN); either 32, 40, 50, or 65. EVOPLUS B 120/220.32 SAN M EVOPLUS B 120/250.40 SAN M EVOPLUS B 150/250.40 SAN M EVOPLUS B 180/250.40 SAN M EVOPLUS B 100/280.50 SAN M EVOPLUS B 120/280.50 SAN M EVOPLUS B 150/280.50 SAN M EVOPLUS B 180/280.50 SAN M EVOPLUS B 40/340.65 SAN M EVOPLUS B 60/340.65 SAN M EVOPLUS B 80/340.65 SAN M EVOPLUS B 100/340.65 SAN M EVOPLUS B 120/340.65 SAN M EVOPLUS B 150/340.65 SAN M

Product Images

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Manufacturer:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Range of vertical multistage booster pumps, with stainless steel bodies and impellors (AISI304 or 316 see model). Maximum working pressure (model dependent): 4.0 bar models: BMVET(I) 32-10-1 to BMVET(I) 32-40. BMVET(I) 42-10-1 to BMVET(I) 42-20. BMVET(I) 65-10-1 to BMVET(I) 65-20-2. BMVET(I) 85-10-1 to BMVET(I) 85-10. 10.0 bar models: BMVET(I) 1-2 to BMVET(I)1-36. BMVET(I) 2-2 to BMVET(I) 2-11. BMVET(I) 3-2 to BMVET(I) 3-29. BMVET(I) 4-2 to BMVET(I) 4-10. BMVET(I) 8-2 to BMVET(I) 8-20. BMVET(I) 12-2 to BMVET(I) 12-18. BMVET(I) 16-2 t BMVET(I) 16-16. BMVET(I) 20-1 to BMVET(I) 20-17. BMVET(I) 32-50-2 to BMVET(I) 32-100. BMVET(I) 42-30-2 to BMVET(I) 42-50. BMVET(I) 65-20-1 to BMVET(I) 65-30. BMVET(I) 85-20-2 to BMVET(I) 85-30-2. 15.0 bar models: BMVET(I) 2-13 to BMVET(I) 2-26. BMVET(I) 3-31 to BMVET(I) 3-36. BMVET(I) 4-12 to BMVET(I) 4-22. BMVET(I) 32-110-2 to BMVET(I) 32-140. BMVET(I) 42-60-2 to BMVET(I) 42-130-2. BMVET(I) 65-40-2 to BMVET(I) 65-80-1. BMVET(I) 85-30-1 to BMVET(I) 85-60. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2009028

Note:

Claims for flow rate are made by the manufacturer and not considered part of the listing.

Size:

DN25 (Pumps with 1, 2 or 3 m³/h rated flow rates). DN32 (Pumps with 4 m³/h rated flow rates). DN40 (Pumps with 8 m³/h rated flow rates). DN50 (Pumps with 12, 16 or 20 m³/h rated flow rates). DN65 (Pumps with 32 m³/h rated flow rates). DN80 (Pumps with 42 m³/h rated flow rates). DN100 (Pumps with 65 or 85 m³/h rated flow rates).

Marking:

EFAFLU and other technical information on data plate. Flow arrow, PN and DN on body.

Installation Requirements:

R001 R415

Expiry date:

30/09/2025

Model:

BMVE T X - Y - Z. BMVE TI X - Y - Z. Model key: BMVE = Pump series name. T = Stainless Steel AISI304. TI = Stainless Steel AISI316. X = rated flow rate in m³/h (1, 2, 3, 4, 8, 12, 16, 20, 32, 42, 65, 85). Y = number of stages (2-140). Z = number of small impellors (blank, 1 or 2).

Product Images

Approval Holder:

EFAFLU BOMBAS E VENTILADORES S.A

Company Name

EFAFLU BOMBAS E VENTILADORES S.A

Phone

+351 252 298 700

General Email

geral@efaflu.pt

View All Listings by this Company

CM(E)(C) range of electronically operated pumps available in stainless steel, (‘EN 1.4301/AISI304’ or ‘EN 1.4401 /AISI316’) and cast iron. (CMEC models were added October 2023). The pumps are supplied with Sic-Sic mechanical shaft seals and FKM or EPDM seals. Cast iron models: Maximum working pressure 10.0 bar. Cold water use only. Stainless steel models: Maximum working pressure 16.0 bar. Maximum operating temperature 60°C for self-priming models, 99°C for all other models.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2011907

Size:

1” - 2” BSP (F) or NPT inlet and outlet.

Marking:

Grundfos and Grundfos logo, type, model and technical information on adhesive label either on the terminal box or fan cover.

Installation Requirements:

R001 R415

Expiry date:

30/11/2025

Model:

CM(E)(C)1, CM(E)(C)3 and CM(E)(C)5: CM(E)(C)1, cast iron / AISI304 2 – 8 stages. CM(E)(C)3, cast iron / AISI304 2 – 8 stages. CM(E)(C)5, cast iron / AISI304 2 – 8 stages. CM(E)(C)1, AISI316 2 - 14 stages. CM(E)(C)3, AISI316 2 - 14 stages. CM(E)(C)5, AISI316 2 - 13 stages. CM(E)(C)10 CM(E)(C)15 and CM(E)(C)25: CM(E)(C)10, cast iron / AISI304 1 – 5 stages. CM(E)(C)15, cast iron / AISI304 1 – 4 stages. CM(E)(C)25, cast iron / AISI304 1 – 4 stages. CM(E)(C)10, AISI316 1 – 8 stages. CM(E)(C)15, AISI316 1 – 4 stages. CM(E)(C)25, AISI316 1 – 4 stages. Self-priming models: CM(E)1, AISI316 3 – 6 stages (S or O) CM(E)3, AISI316 3 – 6 stages (S or O) CM(E)5, AISI316 3 – 7 stages (S or O) Model key: CM/CME/CMEC X1-X2 X3 X4-X5-X6-X7-X8 X9 X10 X11 X11-X12-X13-X14 Where: CM = Centrifugal Modular. CME = Centrifugal Modular with integrated frequency converter. CMEC = Centrifugal Modular with integrated frequency converter and only core functions of the motor unit. (NOTE: CMEC models were added October 2023). X1 = Rated flow rate at 50 Hz (m³/h): 1-25. X2 = Number of impellers: 1-14. X3 = Pump Versions: A - Basic Version. E: Pumps with certificates/approvals. O: Self-priming version (maximum suction lift 8 metres). S: Self-priming version (maximum suction lift 4 metres). X4 = Pipe connection: R: Rp (ISO 7/1). S: Internal Npt thread. X5 = Material in contact with pump media: A: inlets and outlets parts EN-GJL-200, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. G: Sleeve, Pump shaft + Impellers and chambers EN 1.4401/AISI 316. I: Sleeve, Pump shaft + Impellers and chambers EN 1.4301/AISI 304. X6 = Rubber parts in pump (excluding neck ring and shaft seal): E: EPDM. V: FKM. X7 = Shaft seal: A: O-ring seal with fixed driver. X8 = Material of rotating seal face: Q: Silicon Carbide (SIC). X9 = Material of stationary seal face: Q: Silicon Carbide (SIC). X10 =Material of secondary seal: E: EPDM. V: FKM. X11 = Supply voltage: B/B1/C/D/E/E1/F/G/H/I/J/O/S/T/U/V/X. X12 = Motor information: A/B/C/D/EF/G/H/I/J. X13 = Mains plug: A/B/C/D. X14 = Sensor: N: No sensor. Example: CM 10-3 A-R-I-E-A Q Q E C-A-A-N

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Overhead, ceiling mounted shower outlet with chromium plated brass body (various finishes). Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2010330

Note:

Open outlet use only

Size:

½ BSP (M)

Marking:

Kohler on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2025

Model:

98275T-CL-** Katalyst air square shower outlet Where xxx denotes finish and can be replaced with: 2BZ - Oil Rubbed Bronze. BZ - Antique Bronze. SA - Antique Silver. 96 - Biscuit, 7 – Black. W7 - Black Nickel. LB - Bronze. G - Brushed Chrome. AG - Brushed Nickel. BS - Brushed Stainless. FGN - Chartreuse. FRD - Cherry Red. GN - Gunmetal. 2BL - Matte Black. YG - Matte Gold. FNY - Navy Blue. AD - Nickel Silver. R2B - Oil Rubbed Bronze-Gold. CP - Polished Chrome. 1CP - Polished Chrome. ABS PGD - Polished Gold. 24K - Polished Gold. S - Polished Stainless. AGP PVD - Brushed Nickel. 24P PVD - Polished Gold. ADP PVD - Silver Nickel. FBG - Retro Blue. RGD - Rose Gold. TB - Satin Black. SSL - Sterling Silver. TT - Titanium. ULB - Un-lacquered Brass. BV - Vibrant Brushed Bronze. BN - Vibrant Brushed Nickel. AF - Vibrant French Gold. BGD - Vibrant Modern Brushed Gold. PB - Vibrant Polished Brass. SN - Vibrant Polished Nickel. VS - Vibrant Stainless. VNT - Vintage Nickel. W6 - Weathered Bronze. 0 - White. 2MB - Modern Brass.

Product Images

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of over head shower outlets incorporating brass bodies and an adjustable ball joint. The inlet incorporates a combined NBR washer and stainless-steel filter. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2010361

Note:

Open outlet use only.

Size:

½” BSP (F)

Marking:

Moon shower on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2025

Model:

AS-TRB097CP (round). AS-TSB085CP (square).

Product Images

Approval Holder:

Jiangmen Moon Shower Sanitaryware Co., Ltd.

Company Name

Jiangmen Moon Shower Sanitaryware Co., Ltd.

Country

China

View All Listings by this Company

Manufacturer:

Jiangmen Moon Shower Sanitaryware Co., Ltd.

Company Name

Jiangmen Moon Shower Sanitaryware Co., Ltd.

Country

China

View All Listings by this Company

Range of shower outlets with brass bodies (various finishes) and NBR ‘O’ rings. The inlets incorporate a flow regulator. Maximum operating temperature 60°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2012702

Size:

½” BSP (F)

Marking:

SHS on body

Installation Requirements:

R001 R040

Expiry date:

31/12/2025

Model:

V909W-XX 200mm Skirted Shower Head Where the product code suffix ‘XX’ denotes the surface finish. It will always be 2 or 3 digits, which can be any combination of numbers and/or letters. As examples: CP = chrome finish, URM = urban brass matt lacquered.

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of shower handsets with a chromium plated plastic body. The inlets incorporate a flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2011074

Note:

Open outlet use only

Size:

1/2" BSP (M)

Marking:

Bristan on shower handset.

Installation Requirements:

R001 R040

Expiry date:

30/11/2025

Model:

HAND129 HAND128

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Manufacturer:

Xiamen Solex High-Tech Industries Co., Ltd.

Company Name

Xiamen Solex High-Tech Industries Co., Ltd.

Address

No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022

Country

China

General Email

brian_lin@mysolex.com

View All Listings by this Company