Water Regulations Approval Scheme Ltd

Unidelta SpA Approvals

WRAS Approval Number: #1905524

'Unidelta Spigot Fitting'. Black coloured, injection moulded PE100 spigot fitting. For use with water up to 60°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 1905524
Expiry date:: 31/05/2024
Model:
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company

WRAS Approval Number: #1905525

'Unidelta Compression Fitting'. Black coloured, injection moulded polypropylene compression fittings. For use with water up to 60°C.

Section:: 5260 Polypropylene
Section Subtitle:: Components.
WRAS Approval Number:: 1905525
Expiry date:: 31/05/2024
Model:
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company

WRAS Approval Number: #2102521

'Unidelta Flexall'. Extruded, PE-RT/Al/PE-RT pipe comprising of white coloured (translucent) inner layer, aluminum middle later and white coloured (opaque) outer layer. For use with water up to 85°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 2102521
Expiry date:: 28/02/2026
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company

WRAS Approval Number: #2111701

Unidelta range of compression fittings with polypropylene bodies with EPDM ‘O’ rings for use with PE100 polyethylene pipe (manufactured to EN12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2111701
Expiry date:: 30/11/2026
Note:: For above and below ground use
Size:: 20mm, 25mm, 32mm, 40mm, 50mm, 63mm
Marking:: Unidelta, pressure rating & size on the compression nut
Installation Requirements:: R001
Model:: Straight coupler (1001) Reducing coupler (1002) Male adapter (1003) Female adapter (1004) 90° Tee (1005) 90° Elbow (1006) 90° Tee with female threaded take off (1007) 90° Elbow with threaded male take off (1008) 90° Elbow with threaded female take off (1009) 90° Tee with threaded male take off (1010) End plug (1012) 90° reducing tee (1013) Repair slip coupler (1014) Female tee with peg fitting (1012) 90° Elbow with lateral thread take off (1023) 90° Tee with increased take off (1029) Wall plate elbow (1034)
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company

WRAS Approval Number: #2201026

‘Unidelta Deltapress’ range of brass press-fit fittings for use with ‘Unidelta Flexall’ PE-RT/AL/PE-RT pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:: 1105 Multi-Layered Pipe Systems
Section Subtitle:: Compatible fittings and pipe systems for use with hot and cold water. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2201026
Expiry date:: 31/01/2027
Marking:: Unidelta logo and size on crimping sleeve of fitting. Unidelta FLEXALL, size and technical information on pipe.
Installation Requirements:: R001
Model:: ‘Unidelta Deltapress’ fittings for use with ‘Unidelta Flexall’ PE-RT/AL/PE-RT pipe. Fitting crimp profiles: TH, H & U: • Cod.4001 (Coupling): 16x16mm, 18x18mm, 20x20mm, 26x26mm, 32x32mm. • Cod.4002 (Reducing coupling): 18x16mm, 20x16mm, 20x18mm, 26x16mm, 26x20mm, 32x20mm, 32x26mm. • Cod.4003 (BSP Male adaptor): 16mmx3/8”, 16mmx1/2”, 18mmx1/2”, 18mmx3/4”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 26mmx1”, 32mm x1". • Cod.4004 (BSP Female adaptor): 16mmx1/2”, 18mmx1/2”, 18mmx3/4”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 26mmx1”, 32mmx1”. • Cod.4005 (90° Tee): 16x16mm, 18x18mm, 20x20mm, 26x26mm, 32x32mm. • Cod.4006 (90° Elbow): 16x16mm, 18x18mm, 20x20mm, 26x26mm, 32x32mm. • Cod.4007 (90° Tee with threaded BSP Female take off): 16mmx1/2”x16mm, 18mmx1/2”x18mm, 20mmx1/2”x20mm, 20mmx3/4”x20mm, 26mmx3/4”x26mm, 32mmx1”x32mm. • Cod.4008 (90° Elbow with threaded BSP Male take off): 16mm x1/2”, 18mmx1/2”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 32mmx1”. • Cod.4009 (90° Elbow with threaded BSP Female take off): 16mm x1/2”, 18mmx1/2”, 20mmx1/2”, 20mmx3/4”, 26mmx3/4”, 32mmx1”. • Cod.4010 (90° Tee with threaded BSP Male take off): 16mmx1/2”x16mm, 20mmx1/2”x20mm, 20mmx3/4”x20mm, 26mmx3/4”x26mm. • Cod.4011 (45° Elbow): 26x26mm, 32x32mm. • Cod.4013 (90° Reducing tee): 18x16x18mm, 20x16x16mm, 20x16x20mm, 20x18x20mm, 20x20x16mm, 26x16x20mm, 26x16x26mm, 26x20x20mm, 26x20x26mm, 26x26x16mm, 26x26x20mm, 32x20x32mm, 32x26x26mm, 32x26x32mm. • Cod.4029 (90° Tee with increased take off): 16x20x16mm, 20x26x20mm. • Cod.4034 (Wall plate elbow fitting): 16mmx1/2” short version, 16mmx1/2” long version, 18mmx1/2”, 20mmx1/2” short version, 20mmx1/2” long version, 20mmx3/4”. • Cod.4035 (Double wall plate elbow fitting): 16mmx1/2”, 20mmx1/2”.
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company

WRAS Approval Number: #2210023

Range of black coloured, PE100 butt fusion fittings for use with PE100 pipes (manufactured to EN 12201). Maximum working pressure for fittings used with SDR11 pipe is 16.0 bar and for fittings used with SDR17 pipe is 10.0 bar. For above and below ground use. Cold water use only.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2210023
Expiry date:: 31/10/2027
Size:: DN20 – DN315
Marking:: Unidelta & technical information on body.
Installation Requirements:: R001
Model:: Fittings for use with SDR11 pipe: 3140 – Butt fusion reducer. 3141 – Butt fusion 90 elbow. 3142 – Butt fusion 45 Elbow. 3143 – Butt fusion 90 tee. 3144 – Butt fusion end cap. 3145 – Butt fusion stub end. Fittings for use with SDR17 pipe: 3150 – Butt fusion reducer. 3151 – Butt fusion 90 elbow. 3152 – Butt fusion 45 elbow. 3153 – Butt fusion 90 tee. 3154 – Butt fusion end cap. 3155 – Butt fusion stub end.
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company

WRAS Approval Number: #2304510

'UNIDELTA Electrofusion Fitting'. Black coloured, injection moulded PE100 Electrofusion Fitting. For use with water up to 60°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 2304510
Expiry date:: 30/04/2028
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company

WRAS Approval Number: #2304080

‘Unidelta’ brass compression fittings for use with ‘Unidelta UniTerm’ PEX pipe. Maximum working pressure 20.0 bar. Cold water use only.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2304080
Expiry date:: 30/04/2028
Size:: ‘Unidelta UniTerm’ pipe: 933816: PE-Xb SDR 7.4 16mm 933820: PE-Xb SDR 7.4 20mm ‘Unidelta PEX DZR Brass’ Fittings: 6001: Plain Female Elbow 16mm x ½” BSP 6002: Plain Female Elbow 20mm x ½” BSP 6003 Female Elbow with high neck 16mm x ½” BSP 6004 Female Elbow with high neck 20mm x ½” BSP 5006 Female Adaptor 16mm x ½” BSP 5008 Female Adaptor 16mm x ¾” BSP 5014 Female Adaptor 20mm x ½” BSP 5016 Female Adaptor 20mm x ¾” BSP 6560 Male Adaptor 16mm x ½” BSP 6565 Male Adaptor 16mm x ¾” BSP 6580 Male Adaptor 20mm x ½” BSP 6585 Male Adaptor 20mm x ¾” BSP 5120 Coupler 16mm x 16mm 5130 Coupler 20mm x 20mm 140505 Equal Tee 16mm x 16mm x 16mm 140515 Equal Tee 20mm x 20mm x 20mm 7210 Elbow 90 16mm x 16mm 7220 Elbow 90 20mm x 20mm
Marking:: Unidelta UniTerm’, size, date of manufacture (DD/MM/YY) and technical information on pipe. ‘Unidelta’, CR, size and technical information on body of fittings.
Installation Requirements:: R001 R008
Model:: ‘Unidelta UniTerm’ pipe: 933816: PE-Xb SDR 7.4 16mm 933820: PE-Xb SDR 7.4 20mm ‘Unidelta PEX DZR Brass’ Fittings: 6001: Plain Female Elbow 16mm x ½” BSP 6002: Plain Female Elbow 20mm x ½” BSP 6003 Female Elbow with high neck 16mm x ½” BSP 6004 Female Elbow with high neck 20mm x ½” BSP 5006 Female Adaptor 16mm x ½” BSP 5008 Female Adaptor 16mm x ¾” BSP 5014 Female Adaptor 20mm x ½” BSP 5016 Female Adaptor 20mm x ¾” BSP 6560 Male Adaptor 16mm x ½” BSP 6565 Male Adaptor 16mm x ¾” BSP 6580 Male Adaptor 20mm x ½” BSP 6585 Male Adaptor 20mm x ¾” BSP 5120 Coupler 16mm x 16mm 5130 Coupler 20mm x 20mm 140505 Equal Tee 16mm x 16mm x 16mm 140515 Equal Tee 20mm x 20mm x 20mm 7210 Elbow 90 16mm x 16mm 7220 Elbow 90 20mm x 20mm
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company

WRAS Approval Number: #2302566

'Unidelta Uniterm PEX Pipe'. Off-white coloured (opaque), extruded PEX pipe. For use with water up to 85°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 2302566
Expiry date:: 29/02/2028
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company

WRAS Approval Number: #240455027

'Unidelta Spigot Fitting'. Black coloured, injection moulded PE100 spigot fitting. For use with water up to 60°C.

Section:: 5240 Polyethylene
Section Subtitle:: Components. All components listed in this section have been tested for water contact suitability of material only.
WRAS Approval Number:: 240455027
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Expiry date:: 30/04/2029
Manufacturer:: Unidelta SpA

Company Name
Unidelta SpA
Address
Via Capparola Sotto 4, 25078 Vestone (Brescia)

View All Listings by this Company