Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #251203302

Section:: 0470 Combination Tap Assemblies
Description:: A Single hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Capable of achieving AUK3 Tap Gap. Stainless Steel EPDM lined flexible inlet hoses. The product is supplied with 15x15mm compression isolation valves that incorporate single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate it provides backflow protection.
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
CNN EFSNK FL6 C	Chrome	1/2" BSP (M)	5 bar	60 °C	Bristan	Operating member	No	Ceramic cartridge	C-plate	Aerator

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #251215304

Section:: 0490 Combination Tap Assemblies
Description:: A Range of Single hole tap(s) with a double outlet and a swivel spout.
Deck Mounted. Stainless steel braided, EPDM lined, inlet hoses. Capable of achieving AUK3 Tap Gap.
Installation Requirements:: R001 R006
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet
2720055	Chromed	½" captive nut	10 bar	85 °C	MVI	Rear of body	No	1/4 Turn ceramic disk	C-plate	Flow Straightener
2720060	Chromed	½" captive nut	10 bar	85 °C	MVI	Rear of body	No	1/4 Turn ceramic disk	C-plate	Open Outlet
2720062	Chromed	½" captive nut	10 bar	85 °C	MVI	Rear of body	No	1/4 Turn ceramic disk	C-plate	Open Outlet

Approval Holder:: MVI Hazel Ltd.

Company Name
MVI Hazel Ltd.
Address
1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

WRAS Approval Number: #251208301

Section:: 0510 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a fixed spout.
Wall Mounted Undefinable Air Gap – See IRN’s
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
2437	Chrome plated	1/2"	5 bar	60 °C	DELABIE	Handle	Yes	Single sequential	Not Applicable	Flow Straightener	Flow Regulator Fitted,
2437S	Chrome plated	1/2"	5 bar	60 °C	DELABIE	Handle	Yes	Single sequential	Not Applicable	Flow Straightener	Flow Regulator Fitted,

Product Images

Approval Holder:: Delabie UK Ltd.

Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company
Manufacturers:: Delabie SAS

WRAS Approval Number: #251203303

Section:: 0510 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a fixed spout.
Deck Mounted Capable of Achieving AUK2 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R005 R010
Expiry date:: 31/12/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
K BF C	Chrome 6	3/4" BSP (M)	5 bar	65 °C	Bristan	Indice	No	1/4 Turn ceramic disc	Metal Backnuts	Open Outlet
RP3 K BF C	Chrome 3	3/4" BSP (M)	5 bar	65 °C	Bristan	Indice	No	1/4 Turn ceramic disc	Metal Backnuts	Open Outlet

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #260403302

Section:: 0550 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a single outlet and a swivel spout.
Wall Mounted Undefinable air gap please see IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R010 R040
Expiry date:: 30/04/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
VAL2 WMSNK C CD	Crome	1/2" BSP (M)	5 bar	60 °C	Bristan	Handle	No	1/4 Turn ceramic disk	Metal Backnuts	Open Outlet

Notes & Further Information: Note - Both Products are the same, one is wall mount, one is deck mounted.

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #260403304

Section:: 0570 Combination Tap Assemblies
Description:: A Range of Two hole tap(s) with a double outlet and a swivel spout.
Deck Mounted Capable of achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006
Expiry date:: 30/04/2031

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
VAL2 BRDSM C CD	Chrome	1/2" BSP (M)	5.0 bar	60 °C	Bristan	Handle	No	1/4 Turn ceramic disc	Metal Backnuts	Open Outlet
VAL2 BRDSM C 6 CD	Chrome	1/2" BSP (M)	5.0 bar	60 °C	Bristan	Handle	No	1/4 Turn ceramic disc	Metal Backnuts	Open Outlet

Notes & Further Information: VAL2 BRDSM C 6 CD - has a 6 inch lever

Product Images

Approval Holder:: Bristan Group Ltd.

Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

WRAS Approval Number: #251115318

Section:: 0660 Combination Tap Assemblies
Description:: A Range of Three hole tap(s) with a single outlet and a swivel spout.
Deck Mounted Stainless-steel or nylon braided PEX lined inlet hoses Stainless-steel or nylon braided PEX lined connection hoses Capable of Achieving AUK3 Tap Gap
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R006 R007 R009 R010
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
K007*	Various	½" captive nut	10 bar	65 °C	WINSDRUM	On base of spout	No	1/4 Turn ceramic disc	Metal Backnuts	Aerator	Interconnecting Hoses,
B008*	Various	½" captive nut	10 bar	65 °C	WINSDRUM	On base of spout	No	1/4 Turn ceramic disc	Metal Backnuts	Aerator	Interconnecting Hoses,

Notes & Further Information: * denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black

Approval Holder:: WINSDRUM Technology (Foshan) Co., Ltd

Company Name
WINSDRUM Technology (Foshan) Co., Ltd
Address
Room 804-805, Flat 2, Jiabang Guojin Center, No.1 Shilong South Road, Guicheng Street, Nanhai District, Foshan City, Guangdong Province
Country
China
Phone
0086-19527590441
General Email
carina07@126.com

View All Listings by this Company

WRAS Approval Number: #251115320

Section:: 0682 Combination Tap Assemblies
Description:: A Range of Spout outlet(s).
Wall mounted Undefinable air gap see IRN's
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Installation Requirements:: R001 R040
Expiry date:: 30/11/2030

Product Identification	Surface finish	Inlet Dimension	Max Wrk. Pressure	Max Op. Temp.	Marking	Marking Location	All metals in the water pathway are on the 4msi positive list	Headwork	Fixing Type	Spout Outlet	Includes
TS231**	Various	BSP 1/2" (M)	Open outlet use only bar	60 °C	Kind	Spout and handle	No	Not applicable	Not Applicable	Aerator
TS232**	Various	BSP 1/2" (M)	Open outlet use only bar	60 °C	Kind	Spout and handle	No	Not applicable	Not Applicable	Aerator

Notes & Further Information: ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:: Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name
Guangzhou KIND Architecture Material Technology Co., Ltd.
Address
Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province
Postcode
510700
Country
China
Phone
+86-20-23371404
General Email
sale@watersino.com

View All Listings by this Company

WRAS Approval Number: #251202721

Expansion vessel with a carbon steel body, polypropylene cover and a butyl membrane. Maximum working pressure: 10 Bar. Maximum operating temperature: 99°C.

Section:: 1000 Expansion Vessels
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: ½” BSP (M).
Marking:: Taizhou Tianyang Electrical Co Ltd, model, max pressure, max temp, product info on body
Installation Requirements:: R001 R530
Expiry date:: 31/12/2030
Model:: TY-01-2L-P.

Approval Holder:: Taizhou Tianyang Electrical Co., Ltd.

Company Name
Taizhou Tianyang Electrical Co., Ltd.
Address
Shangma Industrial Zone, Wenling City, Taizhou
Country
Zhejiang,
Phone
86?576?89956882

View All Listings by this Company

WRAS Approval Number: #251202030

Expansion vessels incorporating a stainless-steel body and SEFA membrane. Maximum working pressure: 10 bar, except A2C2R27 WR000 (DP 24/16X) 1” BSPP (M) which is 16 bar. Maximum operating temperature 85˚C.

Section:: 1000 Expansion Vessels
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: ELBI, Model name, Serial, Production number, Nominal capacity, Max pressure and other technical information on lable on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: A2C2L11 WR000 (DP-5X) ¾” BSPP (M), A2C2L16 WR000 (DP-8X) ¾” BSPP (M), A2C2L19 WR000 (DP11X) ¾” BSPP (M), A2C2L24 WR000 (DP-18X) ¾” BSPP (M), A2C2L27 WR000 (DP-24X) 1” BSPP (M), A2C2L31 WR000 (DP-35X) 1” BSPP (M). A2C2L34 WR000 (DP-50X) 1” BSPP (M), A2C2L35 WR000 (DPV-60X) 1” BSPP (M), A2C2L37 WR000 (DPV-80X) 1” BSPP (M), A2C2L38 WR000 (DPV-100X) 1 ¼”” BSPP (M), A2C2L43 WR000 (DPV-150X) 1 ¼”” BSPP (M), A2C2L47 WR000 (DPV-200X) 1 ¼”” BSPP (M), A2C2L51 WR000 (DPV-300X) 1 ¼”” BSPP (M), A2C2L55 WR000 (DPV-500X) 1” BSPP (M). A2E2L25 WR000 (DPH-20X) 1” BSPP (M), A2E2L27 WR000 (DPH 24X) 1” BSPP (M), A2E2L35 WR000 (DPH 60X) 1” BSPP (M), A2F2L25 WR000 (DPH-20X G3/4”) 3/4” BSPP (M), A2F2L27 WR000 (DPH-24X G3/4”) 3/4” BSPP (M). A2C2R27 WR000 (DP 24/16X) 1” BSPP (M).

Approval Holder:: Elbi SPA

Company Name
Elbi SPA
Address
Via Buccia 9 35010 Limena PD Italy

View All Listings by this Company

WRAS Approval Number: #251004016

Range of ‘PPS/GF BFS (black)’ shrink back fittings for use with ‘Uponor Combi pipe’ (PEX/EVOH/PEX). Maximum operating pressures 12 bar & 6 bar, with maximum operating temperatures 20°C & 95°C respectively.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251004016
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models.
Marking:: U or UPONOR on fittngs. Uponor and product info on pipe.
Installation Requirements:: R001
Expiry date:: 31/10/2030
Model:: 1144509 ELBOW PPS 16-16 ELBOW, 1144510 ELBOW PPS 20-20 ELBOW, 1144511 ELBOW PPS 25-25 ELBOW, 1144512 TEE PPS 16-16-16 TEE, 1144513 TEE PPS 20-20-20 TEE, 1144523 TEE PPS 25-25-25 TEE, 1144515 TEE REDUCER PPS 20-16-20, 1144517 TEE REDUCER PPS 20-16-16, 1144516 COUPLING PPS 16-16, 1144518 COUPLING PPS 20-20, 1144519 COUPLING PPS 25-25, 1144522 REDUCER PPS 20-16, 1162269 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 2X16 C/C 50MM, 1162270 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 3X16 C/C 50MM, 1162271 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 4X16 C/C 50MM, 1162272 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 1XG1/2” MT C/C 50MM, 1162273 AQUA PLUS MANIFOLD Q&E PPM PPS 1” 1XG3/4” MT C/C 50MM, 1162276 AQUA PLUS MANIFOLD PPM 1X C/C50MM, 1162275 AQUA PLUS MANIFOLD PPM 2X C/C50MM, 1162274 AQUA PLUS MANIFOLD PPM 3X C/C50MM, 1162277 AQUA PLUS MANIFOLD PPM 1+1X C/C50MM, 1162282 AQUA PLUS Q&E ADAPTER PPS PPM 16, 1162283 AQUA PLUS Q&E ADAPTER PPM 18, 1162284 AQUA PLUS Q&E ADAPTER PPM 20, 1162290 AQUA PLUS ADAPTER MALE THREAD PPM 1" G3/4"MT, 1162294 AQUA PLUS ELBOW MALE FEMALE PPM 1"MT-1"FT, 1162293 AQUA PLUS ELBOW ADAPTER MALE PPM 1" G3/4"MT, 1162291 AQUA PLUS ADAPTER BRASS NUT PPM 1"MT-G3/4"SN, 1162292 AQUA PLUS ADAPTER BRASS NUT PPM 1"FT-3/4"SN, 1162288 AQUA PLUS OUTLET PLUG PPS PPM, 1162297 AQUA PLUS MANIFOLD PLUG PPM MT, 1162286 AQUA PLUS PPM OUTLET NUT, 1162295 AQUA PLUS NIFOLD END CAP PPM 1"FT END CAP.

Approval Holder:: Uponor GmbH

Company Name
Uponor GmbH
Address
Industriestrasse 56, Hassfurt
Postcode
97437,
Country
Germany
Phone
0034916853600
General Email
mariaisabel.fernandez@uponor.com

View All Listings by this Company

WRAS Approval Number: #251202007

'Instantor’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Instantor’ stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251202007
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.
Marking:: Instantor, model and size on fitting body. Instantor, size and product info on pipe.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: Coupling from 15 to 168.3mm Material 1.4401/1.4404 & 1.4301/1.4307 SP410001 SP410002 SP410003 SP410004 SP410005 SP410006 SP410007 SP410008 SP410009 SP410010 SP410011 Slip Coupling from 15 to 108mm Material 1.4401/1.4404 & 1.4301/1.4307 SP4100S1 SP4100S2 SP4100S3 SP4100S4 SP4100S5 SP4100S6 SP4100S7 SP4100S8 SP4100S9 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP415001 SP415002 SP415003 SP415004 SP415005 SP415006 SP415007 SP415008 SP415009 SP415010 SP415011 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP435001 SP435002 SP435003 SP435004 SP435005 SP435006 SP435007 SP435008 SP435009 SP435010 SP435011 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP445001 SP445002 SP445003 SP445004 SP445005 SP445006 SP445007 SP445008 SP445009 SP445010 SP445011 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP425001 SP425002 SP425003 SP425004 SP425005 SP425006 SP425007 SP425008 SP425009 SP425010 SP425011 Female Angle Adapter from 15 1/2" to 1 1/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP417001 SP417002 SP417003 SP417004 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP416001 SP416002 SP416003 SP416004 SP416005 SP416006 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP421001 SP421002 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SPP15001 SPP15002 SPP15003 SPP15004 SPP15005 SPP15006 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 SPS12001 SPS12002 SPS12003 SPS12004 SPS12005 SPS12006 SPS12007 SPS12008 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP430001 SP430221 SP430002 SP430331 SP430332 SP430003 SP430441 SP430442 SP430443 SP430004 SP430551 SP430552 SP430553 SP430005 SP430661 SP430662 SP430663 SP430006 SP430772 SP430776 SP430882 SP430883 SP430886 SP430992 SP430993 SP420996 Reducer from 22-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 SP419021 SP419031 SP419032 SP419041 SP419042 SP419043 SP419051 SP419052 SP419053 SP419054 SP419061 SP419062 SP419063 SP419064 SP419065 SP419072 SP419073 SP419074 SP419075 SP419076 SP419082 SP419083 SP419084 SP419085 SP419086 SP419087 SP419092 SP419093 SP419094 SP419095 SP419096 SP419097 SP419098 SP419099 SP419100 SP419101 SP419102 SP419103 SP419104 SP419105 Reducing tee from 22-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 SP418221 SP418331 SP418332 SP418441 SP418442 SP418443 SP418551 SP418552 SP418553 SP418554 SP418661 SP418662 SP418663 SP418664 SP418665 SP418772 SP418773 SP418774 SP418775 SP418776 SP418882 SP418883 SP418884 SP418885 SP418886 SP418887 SP418992 SP418993 SP418994 SP418995 SP418996 SP418997 SP418998 SP418999 SP418101 SP418102 SP418103 SP418104 SP418105 SP418106 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP418001 SP418002 SP418003 SP418004 SP418005 SP418006 SP418007 SP418008 SP418009 SP418010 SP418011 Female adaptor from 15 1/ 2" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 SP412001 SP412012 SP412021 SP412002 SP412023 SP412032 SP412003 SP412034 SP412043 SP412004 SP412045 SP412054 SP412005 SP412065 SP412006 SP412070 SP412087 Male adaptor from 15 1/2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 SP411001 SP411012 SP411021 SP411002 SP411023 SP411032 SP411003 SP411034 SP411043 SP411004 SP411045 SP411054 SP411005 SP411065 SP411006 SP411070 SP411087 SP411099 Flanges adaptor PN16 from 15 DN16 to 108 DN16 Material 1.4401/1.4404 & 1.4301/1.4307 SP440001 SP440002 SP440003 SP440004 SP440005 SP440006 SP440007 SP440008 SP440009 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400011 SP400012 SP400013 Stop End/Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP451001 SP451002 SP451003 SP451004 SP451005 SP451006 SP451007 SP451007 SP451008 Air tube Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP422001 SP422002 SP422003 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400014 SP400015 SP400016 3 Pieces adaptor from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP424001 SP424002 SP424003 SP424004 SP424005 SP424006 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400017 SP400018 SP400019 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP426001 SP426021 SP426002 SP426032 SP426003 SP426004 SP426005 SP426006 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP427001 SP427021 SP427002 SP427032 SP427003 SP427004 SP427005 SP427006 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 SP428006 SP428007 SP428008 SP428009 SP428010 SP428011 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 SP433001 SP433002 SP433003 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 SP434001 SP434002 SP434003 SP434004 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP480001 SP480002 SP480003 SP480004 SP480005 SP480006 Male Tee threaded adaptor from 15 1/2" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP436001 SP436002 SP436003 SP436004 90Q Male angle adaptor from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP439001 SP439002 SP439003 SP439004 SP439005 SP439006 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP U11001 SP U11012 SP U11023 SP U11002 SP U11003 SP U11034 SP U11004 SP U11005 SP U11006 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP U12001 SP U12012 SP U12023 SP U12002 SP U12003 SP U12034 SP U12004 SP U12005 SP U12006 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 SP481012 SP481002 SP481023 SP481003 SP481034 SP481004 SP481045 SP481005 SP481056 SP481006 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP460001 SP460002 SP460003 SP460004 SP460005 SP460006 Half coupling from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP470001 SP470002 SP470003 SP470004 SP470005 SP470006 SP470007 SP470008 SP470009 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP483001 SP483002 SP483003 SP483004 SP483005 SP483006 SP483007 SP483008 SP483009 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP490001 SP490002 SP490003 SP490004 SP490005 SP490006 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP450001 SP450002 SP450003 SP450004 SP450005 SP450006 SP450007 SP450008 SP450009 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP482001 SP482002 SP482003 SP482004 SP482005 SP482006 SP482007 SP482008 SP482009 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 SP452001 SP452002 SP452003 SP452004 SP452005 SP452006 SP452007 SP452008 SP452009 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP453001 SP453002 SP453003 SP453004 SP453005 SP453006 SP453007 SP453008 SP453009 Male plug from 16 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP454001 SP454002 SP454003 SP454004 SP454005 SP454006 SP454007 SP454008 SP454009 Weld Adaptor from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP455001 SP455002 SP455003 SP455004 SP455005 SP455006 60Q Elbow with plain ends from 15 to 54 Material (316L)1.4404 SP458001 SP458002 SP458003 SP458004 SP458005 SP458006 PIPE: ISSP 111 = 15 x 0.6 mm Material (316L) 1.4404 ISSP 112 = 22 x 0.7 mm Material (316L) 1.4404 ISSP 113 = 28 x 0.8 mm Material (316L) 1.4404 ISSP 114 = 35 x 1 mm Material (316L) 1.4404 ISSP 115 = 42 x 1.1mm Material (316L) 1.4404 ISSP 116 = 54 x 1.2 mm Material (316L) 1.4404 ISSP 117 = 76.1 x 1.5 mm Material (316L) 1.4404 ISSP118 = 88.9 x 2 mm Material (316L) 1.4404 ISSP120 139.7 x 2 mm Material (316L) 1.4404 ISSP121 168.3 x 2 mm Material (316L) 1.4404

Approval Holder:: Sanbra Fyffe Ltd.

Company Name
Sanbra Fyffe Ltd.
Address
Instantor Works Santry Avenue Dublin
Postcode
D09 K160
Country
Ireland
Phone
+353(0)1 842 6255
General Email
Ryan.Charleson@Instantor.ie

View All Listings by this Company

WRAS Approval Number: #250702046

Range of plastic pushfit fittings, for use with ALTOPOLY EVOH PEX pipe, manufactured to BS7291-3:2010 (15 to 22mm), PEX pipe manufactured to BS 7291-3 (28mm only) and ALTOPOLY PB pipe (white and grey) manufactured to BS7291-2:2010 (15 to 28mm). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:: 1100 Fittings and Pipe - Compatible Systems
Section Subtitle:: Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 250702046
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: R008 applies to the ALTOPOLY PB (white) pipe only.
Size:: All models available in 15, 22 or 28mm pushfit.
Marking:: Material and size on fitting body. Altopoly, size, WRAS, manufacturing standard, temp, pressure and batch no. on pipe.
Installation Requirements:: R001 R008
Expiry date:: 31/07/2030
Proviso:: The supplied pipe inserts must be used.
Model:: SC (Straight Connector) RED (Reducer) ELB (Elbow) SE (Stop Ends) TEE (Equal Tee) BRT (Unequal Tee)

Approval Holder:: Navigator MSL Ltd.

Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234
General Email
sales@navigatormsl.com

View All Listings by this Company

WRAS Approval Number: #251212020

Range of ZL brass compression fittings. Compression connection is to be used with copper pipe EN1057. Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:: 1150 Fittings for use with Tube and Pipe
Section Subtitle:: Compression, metal, for use with copper tube - above ground use only.
WRAS Approval Number:: 251212020
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: Please refer to models
Marking:: Company name(zhongliang), Model, size on body.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: ZL-9822-15,15mm ZL-9822-22, 22mm ZL-9822-28, 28mm ZL-9801-15*1/2M-00,15mm ZL-9801-15*3/4M-00, 15mm ZL-9801-22*3/4M-00, 22mm ZL-9801-22*1M-00, 22mm ZL-9801-28*1M-00, 28mm ZL-9801-28*3/4M-00, 28mm ZL-9801-22*15-00, 22mm ZL-9801-28*22-00, 28mm ZL-9801-15*15-00, 15mm ZL-9801-22*22-00, 22mm ZL-9801-28*28-00, 28mm ZL-9802-15*1/2F-00, 15mm ZL-9802-15*3/4F-00, 15mm ZL-9802-22*3/4F-00, 22mm ZL-9802-22*1F-00, 22mm ZL-9802-28*1F-00, 28mm ZL-9802-28*3/4F-00, 28mm ZL-9811-15*1/2M-00, 15mm ZL-9811-15*3/4M-00, 15mm ZL-9811-22*3/4M-00, 22mm ZL-9811-22*1M-00, 22mm ZL-9811-28*1M-00, 28mm ZL-9811-28*3/4M-00, 28mm ZL-9811-15*16-00, 15mm ZL-9811-15*15-00, 15mm ZL-9811-22*22-00, 22mm ZL-9811-28*28-00, 28mm ZL-9811-15*1/2F-00, 15mm ZL-9811-15*3/4F-00, 15mm ZL-9811-22*3/4F-00, 22mm ZL-9811-22*1F-00, 22mm ZL-9811-28*1F-00, 28mm ZL-9811-28*3/4F-00, 28mm ZL-9814-1/2*15-00, 15mm ZL-9816-15-00, 15mm ZL-9817-15-00, 15mm ZL-9831-1/2*15-00, 15mm

Approval Holder:: Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Company Name
Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.
Address
122 Qiutao West Road, Qinggang Town, Yuhuan Country, Taizhou City
Country
China

View All Listings by this Company
Manufacturer:: Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.

Company Name
Yuhuan Zhongliang Fluid Intelligent Control Co. Ltd.
Address
122 Qiutao West Road, Qinggang Town, Yuhuan Country, Taizhou City
Country
China

View All Listings by this Company

WRAS Approval Number: #240904040

Range of copper press fittings (‘M’ type crimp profile) and brass threaded adaptor fittings, for use with copper pipe (manufactured to EN1057). Maximum working pressure and operating temperatures: 16.0 bar @ 30°C and 10.0 bar @ 95°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 240904040
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: 15mm - 54mm, ½” - 2” BSP. Sizes added December 2024: 66.7mm - 108mm. 2½” - 4” BSP.
Marking:: "CORE" and size, EN1253 & batch number on fitting.
Installation Requirements:: R001
Expiry date:: 30/09/2029
Model:: Copper Coupler: CCP1015 - 15mm x 15mm, CCP1022 - 22mm x 22mm, CCP1028 - 28mm x 28mm, CCP1035 - 35mm x 35mm, CCP1042 - 42mm x 42mm, CCP1054 - 54mm x 54mm, CCP1067 - 66.7mm x 66.7mm, CCP1076 - 76.1mm x 76.1mm, CCP1108 - 108mm x 108mm. Copper Elbow: CCP12015 - 15mm x 15mm, CCP12022 - 22mm x 22mm, CCP12028 - 28mm x 28mm, CCP12035 - 35mm x 35mm, CCP12042 - 42mm x 42mm, CCP12054 - 54mm x 54mm, CCP12067 - 66.7mm x 66.7mm, CCP12076 - 76.1mm x 76.1mm, CCP12108 - 108mm x 108mm. Copper 90 Degree Street Elbow: CCP12S015 - 15mm x 15mm, CCP12S022 - 22mm x 22mm, CCP12S028 - 28mm x 28mm, CCP12S035 - 35mm x 35mm, CCP12S042 - 42mm x 42mm, CCP12S054 - 54mm x 54mm, CCP12S067 - 66.7mm x 66.7mm, CCP12S076 - 76.1mm x 76.1mm, CCP12S108 - 108mm x 108mm. Copper 45 Degree Elbow: CCP21015 - 15mm x 15mm, CCP21022 - 22mm x 22mm, CCP21028 - 28mm x 28mm, CCP21035 - 35mm x 35mm, CCP21042 - 42mm x 42mm, CCP21054 - 54mm x 54mm, CCP21067 - 66.7mm x 66.7mm, CCP21076 - 76.1mm x 76.1mm, CCP21108 - 108mm x 108mm. Copper 45 Degree Street Elbow: CCP21S015 - 15mm x 15mm, CCP21S022 - 22mm x 22mm, CCP21S028 - 28mm x 28mm, CCP21S035 - 35mm x 35mm, CCP21S042 - 42mm x 42mm, CCP21S054 - 54mm x 54mm, CCP21S067 - 66.7mm x 66.7mm, CCP21S076 - 76.1mm x 76.1mm, CCP21S108 - 108mm x 108mm. Copper Fitting Reducer: CCP6022015 - 22mm x 15mm, CCP6028015 - 28mm x 15mm, CCP6028022 - 28mm x 22mm, CCP6035022 - 35mm x 22mm, CCP6035028 - 35mm x 28mm, CCP60042022 - 42mm x 22mm, CCP6042028 - 42mm x 28mm, CCP6042035 - 42mm x 35mm, CCP6054028 - 54mm x 28mm, CCP6054035 - 54mm x 35mm, CCP6054042 - 54mm x 42mm, CCP6067028 - 66.7mm x 28mm, CCP6067035 - 66.7mm x 35mm, CCP6067042 - 66.7mm x 42mm, CCP6067054 - 66.7mm x 54mm, CCP6076035 - 76.1mm x 35mm, CCP6076042 - 76.1mm x 42mm, CCP6076054 - 76.1mm x 54mm, CCP6076067 - 76.1mm x 66.7mm, CCP6108042 - 108mm x 42mm, CCP6108054 - 108mm x 54mm, CCP6108067- 108mm x 66.7mm, CCP6108076 - 108mm x 76.1mm. Copper Equal Tee: CCP24015 - 15mm x 15mm x 15mm, CCP24022 - 22mm x 22mm x 22mm, CCP24028 - 28mm x 28mm x 28mm, CCP24035 - 35mm x 35mm x 35mm, CCP24042 - 42mm x 42mm x 42mm, CCP24054 - 54mm x 54mm x 54mm, CCP24067 - 66.7mm x 66.7mm x 66.7mm, CCP24076 - 76.1mm x 76.1mm x 76.1mm, CCP24108 - 108mm x 108mm x 108mm. Copper Reducer Tee: CCP28015015022 - 15mm x 15mm x 22mm, CCP27022015015 - 22mm x 15mm x 15mm, CCP26022015022 - 22mm x 15mm x 22mm, CCP25022015 - 22mm x 22mm x 15mm, CCP28022022028 - 22mm x 22mm x 28mm, CCP26028015028 - 28mm x 15mm x 28mm, CCP27028022015- 28mm x 22mm x 15mm, CCP27028022022 - 28mm x 22mm x 22mm, CCP26028022028 - 28mm x 22mm x 28mm, CCP25028015- 28mm x 28mm x 15mm, CCP25028022 - 28mm x 28mm x 22mm, CCP28028028035 - 28mm x 28mm x 35mm, CCP27035022022 - 35mm x 22mm x 22mm, CCP26035022035 - 35mm x 22mm x 35mm, CCP27035028022 - 35mm x 28mm x 22mm, CCP27035028028 - 35mm x 28mm x 28mm, CCP26035028035 - 35mm x 28mm x 35mm, CCP25035015 - 35mm x 35mm x 15mm, CCP25035022 - 35mm x 35mm x 22mm, CCP25035028 - 35mm x 35mm x 28mm, CCP27042035035 - 42mm x 35mm x 35mm, CCP25042015 - 42mm x 42mm x 15mm, CCP25042022- 42mm x 42mm x 22mm, CCP25042028 - 42mm x 42mm x 28mm, CCP25042035 - 42mm x 42mm x 35mm, CCP25054022 - 54mm x 54mm x 22mm, CCP25054028 - 54mm x 54mm x 28mm, CCP25054035 - 54mm x 54mm x 35mm, CCP25054042 - 54mm x 54mm x 42mm. Reducer Tee: CCP25067028- 66.7mm x 66.7mm x 28mm, CCP25067035 - 66.7mm x 66.7mm x 35mm, CCP25067042 - 66.7mm x 66.7mm x 42mm, CCP25067054 - 66.7mm x 66.7mm x 54mm, CCP25076022 - 76.1mm x 76.1mm x 22mm, CCP25076028 - 76.1mm x 76.1mm x 28mm, CCP25076035 - 76.1mm x 76.1mm x 35mm, CCP25076042 - 76.1mm x 76.1mm x 42mm, CCP25076054 - 76.1mm x 76.1mm x 54mm, CCP250108054 - 108mm x 108mm x 54mm, CCP250108067 - 108mm x 108mm x 66.7mm, CCP250108076 - 108mm x 108mm x 76.1mm. Copper End Cap: CCP61015 - 15mm, CCP61022 - 22mm, CCP61028 - 28mm, CCP61035 - 35mm, CCP61042 - 42mm, CCP61054 - 54mm, CCP61067 - 66.7mm, CCP61076 - 76.1mm, CCP61108 - 108mm. Copper Slip Coupler: CCP1S015 - 15mm x 15mm, CCP1S022 - 22mm x 22mm, CCP1S028 - 28mm x 28mm, CCP1S035 - 35mm x 35mm, CCP1S042 - 42mm x 42mm, CCP1S054 - 54mm x 54mm, CCP1S067 - 66.7mm x 66.7mm, CCP1S076 - 76.1mm x 76.1mm, CCP1S108 - 108mm x 108mm. Brass Male Adaptor: CCP3015 - 15mm x 1/2", CCP3015020 - 15mm x 3/4", CCP3022- 22mm x 1/2", CCP3022015 - 22mm x 3/4", CCP3022025 - 22mm x 1", CCP3028 - 28mm x 1", CCP3035 - 35mm x 1.1/4", CCP3042 - 42mm x 1.1/2", CCP3054- 54mm x 2", CCP3067 - 66.7mm x 2.1/2", CCP3076065 - 76.1mm x 2.1/2", CCP3076 - 76.1mm x 3", CCP3108 - 108mm x 4". Brass Female Adaptor: CCP2015 - 15mm x 1/2", CCP2022015 - 22mm x 1/2", CCP2022 - 22mm x 3/4", CCP2028 - 28mm x 1", CCP2035 - 35mm x 1.1/4", CCP2042 - 42mm x 1.1/2", CCP2054 - 54mm x 2", CCP2076065 - 76.1mm x 2.1/2", Brass Female Tee: CCP30015 - 15mm x 15mm x 1/2", CCP30022015 - 22mm x 22mm x 1/2", CCP30022020 - 22mm x 22mm x 3/4", CCP30028015 - 28mm x 28mm x 1/2", CCP30028020 - 28mm x 28mm x 3/4", CCP30035015 - 35mm x 35mm x 1/2", CCP30042015 - 42mm x 42mm x 1/2", CCP30054015- 54mm x 54mm x 1/2", CCP30076015 - 76.1mm x 76.1mm x 1/2", CCP30076020 - 76.1mm x 76.1mm x 3/4". Brass Straight Swivel Connector: CCP68015 - 15mm x 3/4", CCP68022025 - 22mm x 1", CCP68022 - 22mm x 3/4", Brass Male Elbow: CCP13015- 15mm x 1/2", CCP13022 - 22mm x 3/4", CCP13028 - 28mm x 1", CCP13035 - 35mm x 1.1/4", CCP13042 - 42mm x 1.1/2", CCP13054 - 54mm x 2", CCP14015- 15mm x 1/2", CCP14022 - 22mm x 3/4", CCP14028 - 28mm x 1", CCP14035 - 35mm x 1.1/4", CCP14042 - 42mm x 1.1/2", CCP14054 - 54mm x 2", CCP15015 - 15mm x 1/2", Brass Union Coupler: CCP11015 - 15mm, CCP11022 - 22mm, CCP11028 - 28mm, CCP11035 - 35mm, CCP11042 - 42mm, CCP11054 - 54mm. Male Insert Adaptor: CCP8015 - 15mm x 1/2", CCP022- 22mm x 3/4", CCP028 - 28mm x 1", CCP035 - 35mm x 1.1/4", CCP8042 - 42mm x 1.1/2", CCP8054 - 54mm x 2". Female Insert Adaptor: CCP7015- 15mm x 1/2", CCP7022 - 22mm x 1/2", CCP7022015 - 22mm x 3/4", CCP7028 - 28mm x 1", CCP7035 - 35mm x 1.1/4", CCP7042 - 42mm x 1.1/2", CCP7054 - 54mm x 2". Brass Male Union: CCP69015 - 15mm x 1/2", CCP69022 - 22mm x 3/4", CCP69028 - 28mm x 1", CCP69035 - 35mm x 1.1/4", CCP69042 - 42mm x 1.1/2", CCP69054 - 54mm x 2". Brass Female Union: CCP69F015 - 15mm x 1/2", CCP69F022 - 22mm x 3/4", CCP69F028 - 28mm x 1", CCP69F035- 35mm x 1.1/4", CCP69F042 - 42mm x 1.1/2", CCP69F054 - 54mm x 2". Dual Port Tee: CCP32067015 - 66.7mm x 66.7mm x 1/2", CCP32076015- 76.1mm x 76.1mm x 1/2", CCP32108020 - 108mm x 108mm x 1/2".

Approval Holder:: Smith Brothers Stores Limited

Company Name
Smith Brothers Stores Limited
Address
Unit V2 Winchester Avenue, Blaby, Leicester
Postcode
LE8 4GZ
Phone
0116 222 7330
General Email
kel.phillips@sbs.co.uk

View All Listings by this Company

WRAS Approval Number: #251115007

Range of brass press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251115007
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See model.
Marking:: RAPID PRESS logo 'RP' WRAS, batch & size.
Installation Requirements:: R001
Expiry date:: 30/11/2030
Model:: 6243G Coupler Male: MACP015021 15x1/2", MACP01507 15x3/4", MACP022021 22x1/2", MACP022027 22x3/4", MACP022034 22x1", MACP028027 28x3/4", MACP028034 28x1", MACP035034 35x1", MACP035042 35x11/4", MACP042048 42x11/2", MACP054060 54x2". 6270G Coupler Female: FACP015021 15x1/2", FACP015027 15x3/4", FACP022021 22x1/2", FACP022027 22x3/4", FACP022034 22x1", FACP028027 28x3/4", FACP028034 28x1", FACP035034 35x1", FACP035042 35x11/4", FACP042048 42x11/2", FACP054060 54x2". 6359G Straight Swivel: TCCP015021 15x1/2", TCCP015027 15x3/4", TCCP022021 22x1/2", TCCP022027 22x3/4", TCCP022034 22x1", TCCP028034 28x1", TCCP028042 28x11/4". 6092G Male Elbow: MECP015021 15x1/2", MECP015027 15x3/4", MECP022027 22x3/4", MECP220340 22x1", MECP028034 28x1". 6090G Female Elbow: FECP015021 15x1/2", FECP015027 15X3/4", FECP022027 22x3/4", FECP022034 22x1", FECP028034 28x1". 6472G Female Wallplate Elbow: FWCP015021 15x1/2", FWCP022027 22x3/4". 6130G Branch Tee (left x right x middle): FTCP015 15x15x1/2", FTCP022 22x22x1/2", FTCP022027 22x22x3/4", FTCP028 28x28x1/2", FTCP028027 28x28x3/4", FTCP028034 28x28x1", FTCP035 35x35x1/2", FTCP035027 35x35x3/4", FTCP025024 35x35x1", FTCP042 42x42x1/2", FTCP054027 54x54x1/2". 6246G Female Adaptor: FCCP015021 1/2"x15, FCCP022027 3/4"x22. 6361G Male Union: MUCP025021 15x1/2", MUCP022027 22x3/4", MUCP028034 28x1". 6330G Female Union: FUCP015021 15x1/2", FUCP022027 22x3/4", FUCP028034 28x1".

Approval Holder:: Rapid Press Fittings Ltd

Company Name
Rapid Press Fittings Ltd
Address
2 Penrod Way Heysham Lancashire
Postcode
LA3 2UZ
Phone
(01524) 965100
General Email
jacobrelph@phd.ltd

View All Listings by this Company

WRAS Approval Number: #251202035

‘SLD’ range of copper press fittings with ‘V’ and ‘M’ press profiles and EPDM ‘O’ rings. Fittings to be used with copper pipe manufactured to EN1057. Maximum working pressure: 16 Bar. Maximum operating temperature: 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251202035
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Solerad & size on body
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: SLD Equal Coupler V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Reducing Coupler V Press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD Fitting Reducer V Press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD 90° Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 90° Street Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Street Elbow V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Equal Tee V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Reduced Tee(Middle) V Press profile 22×15×22 mm 28×15×28 mm 28×22×28 mm 35×15×35 mm 35×22×35 mm 35×28×35 mm 42×15×42 mm 42×22×42 mm 42×28×42 mm 42×35×42 mm 54×22×54 mm 54×28×54 mm 54×35×54 mm 54×42×54 mm SLD Reduced Tee(End) V Press profile 22 x 15 x 15 mm 28 x 22 x 22 mm 35 x 22 x 22 mm 22 x 22 x 15 mm 28 x 28 x 15 mm 28 x 28 x 22 mm 35 x 35 x 22 mm 35 x 35 x 28 mm 42 x 35 x 35 mm SLD End Stop V Press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Crossover V Press profile 15 mm 22 mm SLD Part Crossover V Press profile 15 mm 22 mm
SLD Equal Coupler M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Slip Long Coupler M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 SLD Reducing Coupler M press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD Fitting Reducer M press profile 22×15 mm 28×15 mm 28×22 mm 35×15 mm 35×22 mm 35×28 mm 42×15 mm 42×22 mm 42×28 mm 42×35 mm 54×15 mm 54×22 mm 54×28 mm 54×35 mm 54×42 mm SLD 90° Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 90° Street Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD 45° Street Elbow M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Equal Tee M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Reduced Tee(Middle) M press profile 22×15×22 mm 28×15×28 mm 28×22×28 mm 35×15×35 mm 35×22×35 mm 35×28×35 mm 42×15×42 mm 42×22×42 mm 42×28×42 mm 42×35×42 mm 54×22×54 mm 54×28×54 mm 54×35×54 mm 54×42×54 mm SLD Reduced Tee(End) M press profile 22 x 15 x 15 mm 28 x 22 x 22 mm 35 x 22 x 22 mm 22 x 22 x 15 mm 28 x 28 x 15 mm 28 x 28 x 22 mm 35 x 35 x 22 mm 35 x 35 x 28 mm 42 x 35 x 35 mm SLD End Stop M press profile 15 mm 22 mm 28 mm 35 mm 42 mm 54 mm SLD Crossover M press profile 15 mm 22 mm SLD Part Crossover M press profile 15 mm 22 mm

Approval Holder:: Zhejiang Solerad Environment Technology Co., Ltd.

Company Name
Zhejiang Solerad Environment Technology Co., Ltd.
Address
Diankou Industry Zone, Zhuji City, Zhejiang Province
Country
China

View All Listings by this Company

WRAS Approval Number: #251204011

Stainless steel M-profile press-fit fittings (316L) and pipes (316L - EN 10312 and 304 – EN 10312). Maximum operating pressure 16 bar. Maximum operating temperature 100°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 251204011
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Size:: See models
Marking:: Lawton and size on fitting body. Lawton logo, CE UKCA, WRAS, DVGW, EN10312, other tech info on pipe.
Installation Requirements:: R001
Expiry date:: 31/12/2030
Model:: 45° Elbow 7707000015 15mm 45° Elbow SS 316L Press 7707000018 18mm 45° Elbow SS 316L Press 7707000022 22mm 45° Elbow SS 316L Press 7707000028 28mm 45° Elbow SS 316L Press 7707000035 35mm 45° Elbow SS 316L Press 7707000042 42mm 45° Elbow SS 316L Press 7707000054 54mm 45° Elbow SS 316L Press 7707000067 66.7mm 45° Elbow SS 316L Press 7707000076 76.1mm 45° Elbow SS 316L Press 7707000089 88.9mm 45° Elbow SS 316L Press 7707000108 108mm 45° Elbow SS 316L Press 7707000139 139.7mm 45° Elbow SS 316L Press 7707000169 168.3mm 45° Elbow SS 316L Press 45° Street Elbow 7708000015 15mm 45° Street Elbow SS 316L Press 7708000018 18mm 45° Street Elbow SS 316L Press 7708000022 22mm 45° Street Elbow SS 316L Press 7708000028 28mm 45° Street Elbow SS 316L Press 7708000035 35mm 45° Street Elbow SS 316L Press 7708000042 42mm 45° Street Elbow SS 316L Press 7708000054 54mm 45° Street Elbow SS 316L Press 7708000067 66.7mm 45° Street Elbow SS 316L Press 7708000076 76.1mm 45° Street Elbow SS 316L Press 7708000089 88.9mm 45° Street Elbow SS 316L Press 7708000108 108mm 45° Street Elbow SS 316L Press 7708000139 139.7mm 45° Street Elbow SS 316L Press 7708000168 168.3mm 45° Street Elbow SS 316L Press 90° Elbow 7701000015 15mm 90° Elbow SS 316L Press 7701000018 18mm 90° Elbow SS 316L Press 7701000022 22mm 90° Elbow SS 316L Press 7701000028 28mm 90° Elbow SS 316L Press 7701000035 35mm 90° Elbow SS 316L Press 7701000042 42mm 90° Elbow SS 316L Press 7701000054 54mm 90° Elbow SS 316L Press 7701000067 66.7mm 90° Elbow SS 316L Press 7701000076 76.1mm 90° Elbow SS 316L Press 7701000089 88.9mm 90° Elbow SS 316L Press 7701000108 108mm 90° Elbow SS 316L Press 7701000139 139.7mm 90° Elbow SS 316L Press 7701000168 168.3mm 90° Elbow SS 316L Press 90° Female Elbow 7702001512 15mm X 1/2" 90° Female Elbow SS 316L Press 7702001812 18mm X 1/2" 90° Female Elbow SS 316L Press 7702001834 18mm X 3/4"90° Female Elbow SS 316L Press 7702002234 22mm X 3/4"90° Female Elbow SS 316L Press 7702002801 28mm X 1" 90° Female Elbow SS 316L Press 7702005402 54mm X 2" 90° Female Elbow SS 316L Press 7702035114 35mm X 1.1/4" 90° Female Elbow SS 316L Press 7702042112 42mm X 1.1/2" 90° Female Elbow SS 316L Press 90° Male Elbow 7703001512 15mm X 1/2" 90° Male Elbow SS 316L Press 7703001812 18mm X 1/2" 90° Male Elbow SS 316L Press 7703001834 18mm X 3/4"90° Male Elbow SS 316L Press 7703002234 22mm X 3/4"90° Male Elbow SS 316L Press 7703002801 28mm X 1" 90° Male Elbow SS 316L Press 7703005402 54mm X 2" 90° Male Elbow SS 316L Press 7703035114 35mm X 1.1/4" 90° Male Elbow SS 316L Press 7703042112 42mm X 1.1/2" 90° Male Elbow SS 316L Press 90° Plain Bend 7705000015 15mm 90° Plain Bend SS 316L Press 7705000022 22mm 90° Plain Bend SS 316L Press 7705000028 28mm 90° Plain Bend SS 316L Press 7705000035 35mm 90° Plain Bend SS 316L Press 7705000042 42mm 90° Plain Bend SS 316L Press 7705000054 54mm 90° Plain Bend SS 316L Press 7705000067 66.7mm 90° Plain Bend SS 316L Press 7705000076 76.1mm 90° Plain Bend SS 316L Press 7705000089 88.9mm 90° Plain Bend SS 316L Press 7705000108 108mm 90° Plain Bend SS 316L Press 90° Street Elbow 7704000015 15mm 90° Street Elbow SS 316L Press 7704000018 18mm 90° Street Elbow SS 316L Press 7704000022 22mm 90° Street Elbow SS 316L Press 7704000028 28mm 90° Street Elbow SS 316L Press 7704000035 35mm 90° Street Elbow SS 316L Press 7704000042 42mm 90° Street Elbow SS 316L Press 7704000054 54mm 90° Street Elbow SS 316L Press 7704000067 66.7mm 90° Street Elbow SS 316L Press 7704000076 76.1mm 90° Street Elbow SS 316L Press 7704000089 88.9mm 90° Street Elbow SS 316L Press 7704000108 108mm 90° Street Elbow SS 316L Press 7704000139 139.7mm 90° Street Elbow SS 316L Press 7704000168 168.3mm 90° Street Elbow SS 316L Press Coupler 7715000015 15mm Coupler SS 316L Press 7715000018 18mm Coupler SS 316L Press 7715000022 22mm Coupler SS 316L Press 7715000028 28mm Coupler SS 316L Press 7715000035 35mm Coupler SS 316L Press 7715000042 42mm Coupler SS 316L Press 7715000054 54mm Coupler SS 316L Press 7715000067 66.7mm Coupler SS 316L Press 7715000076 76.1mm Coupler SS 316L Press 7715000089 88.9mm Coupler SS 316L Press 7715000108 108mm Coupler SS 316L Press 7715000139 139.7mm Coupler SS 316L Press 7715000168 168.3mm Coupler SS 316L Press End Cap 7724000015 15mm End Cap SS 316L Press 7724000018 18mm End Cap SS 316L Press 7724000022 22mm End Cap SS 316L Press 7724000028 28mm End Cap SS 316L Press 7724000035 35mm End Cap SS 316L Press 7724000042 42mm End Cap SS 316L Press 7724000054 54mm End Cap SS 316L Press 7724000067 66.7mm End Cap SS 316L Press 7724000076 76.1mm End Cap SS 316L Press 7724000089 88.9mm End Cap SS 316L Press 7724000108 108mm End Cap SS 316L Press Equal Tee 7709000015 15mm Equal Tee SS 316L Press 7709000018 18mm Equal Tee SS 316L Press 7709000022 22mm Equal Tee SS 316L Press 7709000028 28mm Equal Tee SS 316L Press 7709000035 35mm Equal Tee SS 316L Press 7709000042 42mm Equal Tee SS 316L Press 7709000054 54mm Equal Tee SS 316L Press 7709000067 66.7mm Equal Tee SS 316L Press 7709000076 76.1mm Equal Tee SS 316L Press 7709000089 88.9mm Equal Tee SS 316L Press 7709000108 108mm Equal Tee SS 316L Press 7709000139 139.7mm Equal Tee SS 316L Press 7709000168 168.3mm Equal Tee SS 316L Press Female Adaptor 7717001512 15mm X 1/2" Female Adaptor SS 316L Press 7717001534 15mm X 3/4" Female Adaptor SS 316L Press 7717001812 18mm X 1/2" Female Adaptor SS 316L Press 7717001834 18mm X 3/4" Female Adaptor SS 316L Press 7717002201 22mm X 1" Female Adaptor SS 316L Press 7717002212 22mm X 1/2" Female Adaptor SS 316L Press 7717002234 22mm X 3/4" Female Adaptor SS 316L Press 7717002801 28mm X 1" Female Adaptor SS 316L Press 7717002812 28mm X 1/2" Female Adaptor SS 316L Press 7717002834 28mm X 3/4" Female Adaptor SS 316L Press 7717003501 35mm X 1" Female Adaptor SS 316L Press 7717005402 54mm X 2" Female Adaptor SS 316L Press 7717006702 66.7mm X 2" Female Adaptor SS 316L Press 7717007602 76.1mm X 2" Female Adaptor SS 316L Press 7717008903 88.9mm X 3" Female Adaptor SS 316L Press 7717010804 108mm X 4" Female Adaptor SS 316L Press 7717028114 28mm X 1.1/4" Female Adaptor SS 316L Press 7717035114 35mm X 1.1/4" Female Adaptor SS 316L Press 7717042112 42mm X 1.1/2" Female Adaptor SS 316L Press 7717076212 76.1mm X 21/2 Female Adaptor SS 316L Press Female Insert Adaptor 7728001512 15mm X 1/2" Female Insert Adaptor SS 316L Press 7728001834 18mm X 3/4" Female Insert Adaptor SS 316L Press 7728002234 22mm X 3/4" Female Insert Adaptor SS 316L Press 7728002801 28mm X 1" Female Insert Adaptor SS 316L Press 7728005402 54mm X 2" Female Insert Adaptor SS 316L Press 7728006702 67mm X 2" Female Insert Adaptor SS 316L Press 7728008903 89mm X 3" Female Insert Adaptor SS 316L Press 7728010804 108mm X 4" Female Insert Adaptor SS 316L Press 7728035114 35mm X 1.1/4" Female Insert Adaptor SS 316L Press 7728042112 42mm X 1.1/2" Female Insert Adaptor SS 316L Press 7728076212 76mm X 2½ Female Insert Adaptor SS 316L Press Female Reducer Tee 7712001512 15mm X 1/2" Female Reducer Tee SS 316L Press 7712001534 15mm X 3/4" Female Reducer Tee SS 316L Press 7712001812 18mm X 1/2" Female Reducer Tee SS 316L Press 7712002201 22mm X 1" Female Reducer Tee SS 316L Press 7712002212 22mm X 1/2" Female Reducer Tee SS 316L Press 7712002234 22mm X 3/4" Female Reducer Tee SS 316L Press 7712002801 28mm X 1" Female Reducer Tee SS 316L Press 7712002812 28mm X 1/2" Female Reducer Tee SS 316L Press 7712002834 28mm X 3/4" Female Reducer Tee SS 316L Press 7712003501 35mm X 1" Female Reducer Tee SS 316L Press 7712003512 35mm X 1/2" Female Reducer Tee SS 316L Press 7712003534 35mm X 3/4" Female Reducer Tee SS 316L Press 7712004201 42mm X 1" Female Reducer Tee SS 316L Press 7712004212 42mm X 1/2" Female Reducer Tee SS 316L Press 7712004234 42mm X 3/4" Female Reducer Tee SS 316L Press 7712005401 54mm X 1" Female Reducer Tee SS 316L Press 7712005412 54mm X 1/2" Female Reducer Tee SS 316L Press 7712005434 54mm X 3/4" Female Reducer Tee SS 316L Press 7712007601 76.1mm X 1" Female Reducer Tee SS 316L Press 7712007602 76.1mm X 2" Female Reducer Tee SS 316L Press 7712007634 76.1mm X 3/4" Female Reducer Tee SS 316L Press 7712008901 88.9mm X 1" Female Reducer Tee SS 316L Press 7712008902 88.9mm X 2" Female Reducer Tee SS 316L Press 7712008934 88.9mm X 3/4" Female Reducer Tee SS 316L Press 7712010801 108mm X 1" Female Reducer Tee SS 316L Press 7712010802 108mm X 2" Female Reducer Tee SS 316L Press 7712010834 108mm X 3/4" Female Reducer Tee SS 316L Press 7712042112 42mm X 1.1/2" Female Reducer Tee SS 316L Press Fitting Reducer 7723001815 18mm X 15mm Fitting Reducer SS 316L Press 7723002215 22mm X 15mm Fitting Reducer SS 316L Press 7723002218 22mm X 18mm Fitting Reducer SS 316L Press 7723002815 28mm X 15mm Fitting Reducer SS 316L Press 7723002818 28mm X 18mm Fitting Reducer SS 316L Press 7723002822 28mm X 22mm Fitting Reducer SS 316L Press 7723003515 35mm X 15mm Fitting Reducer SS 316L Press 7723003518 35mm X 18mm Fitting Reducer SS 316L Press 7723003522 35mm X 22mm Fitting Reducer SS 316L Press 7723003528 35mm X 28mm Fitting Reducer SS 316L Press 7723004215 42mm X 15mm Fitting Reducer SS 316L Press 7723004222 42mm X 22mm Fitting Reducer SS 316L Press 7723004228 42mm X 28mm Fitting Reducer SS 316L Press 7723004235 42mm X 35mm Fitting Reducer SS 316L Press 7723005415 54mm X 15mm Fitting Reducer SS 316L Press 7723005422 54mm X 22mm Fitting Reducer SS 316L Press 7723005428 54mm X 28mm Fitting Reducer SS 316L Press 7723005435 54mm X 35mm Fitting Reducer SS 316L Press 7723005442 54mm X 42mm Fitting Reducer SS 316L Press 7723007622 76.1mm X 22mm Fitting Reducer SS 316L Press 7723007628 76.1mm X 28mm Fitting Reducer SS 316L Press 7723007635 76.1mm X 35mm Fitting Reducer SS 316L Press 7723007642 76.1mm X 42mm Fitting Reducer SS 316L Press 7723007654 76.1mm X 54mm Fitting Reducer SS 316L Press 7723008922 88.9mm X 22mm Fitting Reducer SS 316L Press 7723008928 88.9mm X 28mm Fitting Reducer SS 316L Press 7723008935 88.9mm X 35mm Fitting Reducer SS 316L Press 7723008942 88.9mm X 42mm Fitting Reducer SS 316L Press 7723008954 88.9mm X 54mm Fitting Reducer SS 316L Press 7723008976 88.9mm X 76.1mm Fitting Reducer SS 316L Press 7723010822 108mm X 22mm Fitting Reducer SS 316L Press 7723010828 108mm X 28mm Fitting Reducer SS 316L Press 7723010835 108mm X 35mm Fitting Reducer SS 316L Press 7723010842 108mm X 42mm Fitting Reducer SS 316L Press 7723010854 108mm X 54mm Fitting Reducer SS 316L Press 7723010876 108mm X 76.1mm Fitting Reducer SS 316L Press 7723010889 108mm X 88.9mm Fitting Reducer SS 316L Press Flange Adaptor 7725000168 168.3mm Flange Adaptor SS 316L Press Full Crossover 7714000015 15mm Full Crossover SS 316L Press 7714000018 18mm Full Crossover SS 316L Press 7714000022 22mm Full Crossover SS 316L Press 7714000028 28mm Full Crossover SS 316L Press Male Adaptor 7719000893 88.9mm X 3" Male Adaptor SS 316L Press 7719001512 15mm X 1/2" Male Adaptor SS 316L Press 7719001834 18mm X 3/4" Male Adaptor SS 316L Press 7719002234 22mm X 3/4" Male Adaptor SS 316L Press 7719002801 28mm X 1" Male Adaptor SS 316L Press 7719003501 35mm X 1" Male Adaptor SS 316L Press 7719005402 54mm X 2" Male Adaptor SS 316L Press 7719006702 66.7mm X 2" Male Adaptor SS 316L Press 7719007602 76.1mm X 2" Male Adaptor SS 316L Press 7719010804 108mm X 4" Male Adaptor SS 316L Press 7719035114 35mm X 1.1/4" Male Adaptor SS 316L Press 7719042112 42mm X 1.1/2" Male Adaptor SS 316L Press 7719076212 76.1mm X 21/2 Male Adaptor SS 316L Press Male Insert Adaptor 7729001512 15mm X 1/2" Male Insert Adaptor SS 316L Press 7729001812 18mm X 1/2" Male Insert Adaptor SS 316L Press 7729001834 18mm X 3/4" Male Insert Adaptor SS 316L Press 7729002201 22mm X 1" Male Insert Adaptor SS 316L Press 7729002212 22mm X 1/2" Male Insert Adaptor SS 316L Press 7729002234 22mm X 3/4" Male Insert Adaptor SS 316L Press 7729002801 28mm X 1" Male Insert Adaptor SS 316L Press 7729002812 28mm X 1/2" Male Insert Adaptor SS 316L Press 7729002834 28mm X 3/4" Male Insert Adaptor SS 316L Press 7729003501 35mm X 1" Male Insert Adaptor SS 316L Press 7729005402 54mm X 2" Male Insert Adaptor SS 316L Press 7729006702 66.7mm X 2" Male Insert Adaptor SS 316L Press 7729008903 88.9mm X 3" Male Insert Adaptor SS 316L Press 7729010804 108mm X 4" Male Insert Adaptor SS 316L Press 7729028114 28mm X 1.1/4" Male Insert Adaptor SS 316L Press 7729035112 35mm X 1.1/2" Male Insert Adaptor SS 316L Press 7729035114 35mm X 1.1/4" Male Insert Adaptor SS 316L Press 7729042112 42mm X 1.1/2" Male Insert Adaptor SS 316L Press 7729042114 42mm X 1.1/4" Male Insert Adaptor SS 316L Press 7729054112 54mm X 1.1/2" Male Insert Adaptor SS 316L Press 7729076212 76.1mm X 2½ Male Insert Adaptor SS 316L Press Part Crossover 7713000015 15mm Part Crossover SS 316L Press 7713000018 18mm Part Crossover SS 316L Press 7713000022 22mm Part Crossover SS 316L Press 7713000028 28mm Part Crossover SS 316L Press Reducer Tee 7710010822 108 X 108 X 22mm Reducer Tee SS 316L Press 7710010828 108 X 108 X 28mm Reducer Tee SS 316L Press 7710010835 108 X 108 X 35mm Reducer Tee SS 316L Press 7710010842 108 X 108 X 42mm Reducer Tee SS 316L Press 7710010854 108 X 108 X 54mm Reducer Tee SS 316L Press 7710010876 108 X 108 X 76.1mm Reducer Tee SS 316L Press 7710010889 108 X 108 X 88.9mm Reducer Tee SS 316L Press 7710181815 18 X 18 X 15mm Reducer Tee SS 316L Press 7710222215 22 X 22 X 15mm Reducer Tee SS 316L Press 7710222218 22 X 22 X 18mm Reducer Tee SS 316L Press 7710282815 28 X 28 X 15mm Reducer Tee SS 316L Press 7710282818 28 X 28 X 18mm Reducer Tee SS 316L Press 7710282822 28 X 28 X 22mm Reducer Tee SS 316L Press 7710353515 35 X 35 X 15mm Reducer Tee SS 316L Press 7710353518 35 X 35 X 18mm Reducer Tee SS 316L Press 7710353522 35 X 35 X 22mm Reducer Tee SS 316L Press 7710353528 35 X 35 X 28mm Reducer Tee SS 316L Press 7710424215 42 X 42 X 15mm Reducer Tee SS 316L Press 7710424218 42 X 42 X 18mm Reducer Tee SS 316L Press 7710424222 42 X 42 X 22mm Reducer Tee SS 316L Press 7710424228 42 X 42 X 28mm Reducer Tee SS 316L Press 7710424235 42 X 42 X 35mm Reducer Tee SS 316L Press 7710545415 54 X 54 X 15mm Reducer Tee SS 316L Press 7710545418 54 X 54 X 18mm Reducer Tee SS 316L Press 7710545422 54 X 54 X 22mm Reducer Tee SS 316L Press 7710545428 54 X 54 X 28mm Reducer Tee SS 316L Press 7710545435 54 X 54 X 35mm Reducer Tee SS 316L Press 7710545442 54 X 54 X 42mm Reducer Tee SS 316L Press 7710676722 66.7 X 66.7 X 22mm Reducer Tee SS 316L Press 7710676728 66.7 X 66.7 X 28mm Reducer Tee SS 316L Press 7710676735 66.7 X 66.7 X 35mm Reducer Tee SS 316L Press 7710676742 66.7 X 66.7 X 42mm Reducer Tee SS 316L Press 7710676754 66.7 X 66.7 X 54mm Reducer Tee SS 316L Press 7710767622 76.1 X 76.1 X 22mm Reducer Tee SS 316L Press 7710767628 76.1 X 76.1 X 28mm Reducer Tee SS 316L Press 7710767635 76.1 X 76.1 X 35mm Reducer Tee SS 316L Press 7710767642 76.1 X 76.1 X 42mm Reducer Tee SS 316L Press 7710767654 76.1 X 76.1 X 54mm Reducer Tee SS 316L Press 7710898922 88.9 X 88.9 X 22mm Reducer Tee SS 316L Press 7710898928 88.9 X 88.9 X 28mm Reducer Tee SS 316L Press 7710898935 88.9 X 88.9 X 35mm Reducer Tee SS 316L Press 7710898942 88.9 X 88.9 X 42mm Reducer Tee SS 316L Press 7710898954 88.9 X 88.9 X 54mm Reducer Tee SS 316L Press 7710898976 88.9 X 88.9 X 76.1mm Reducer Tee SS 316L Press Slip Coupler 7716000015 15mm Slip Coupler SS 316L Press 7716000018 18mm Slip Coupler SS 316L Press 7716000022 22mm Slip Coupler SS 316L Press 7716000028 28mm Slip Coupler SS 316L Press 7716000035 35mm Slip Coupler SS 316L Press 7716000042 42mm Slip Coupler SS 316L Press 7716000054 54mm Slip Coupler SS 316L Press 7716000067 66.7mm Slip Coupler SS 316L Press 7716000076 76.1mm Slip Coupler SS 316L Press 7716000089 88.9mm Slip Coupler SS 316L Press 7716000108 108mm Slip Coupler SS 316L Press 7716000139 139.7mm Slip Coupler SS 316L Press 7716000168 168.3mm Slip Coupler SS 316L Press Straight Union 7727000015 15mm Straight Union SS 316L Press 7727000022 22mm Straight Union SS 316L Press 7727000028 28mm Straight Union SS 316L Press 7727000035 35mm Straight Union SS 316L Press 7727000042 42mm Straight Union SS 316L Press 7727000054 54mm Straight Union SS 316L Press Wallplate Elbow 7726001512 15mm X 1/2" Wallplate Elbow SS 316L Press 7726001534 15mm X 3/4" Wallplate Elbow SS 316L Press 7726001801 18mm X 1" Wallplate Elbow SS 316L Press 7726001812 18mm X 1/2" Wallplate Elbow SS 316L Press 7726001834 18mm X 3/4" Wallplate Elbow SS 316L Press 7726002201 22mm X 1" Wallplate Elbow SS 316L Press 7726002212 22mm X 1/2" Wallplate Elbow SS 316L Press 7726002234 22mm X 3/4" Wallplate Elbow SS 316L Press

Approval Holder:: The Lawton Tube Company Ltd.

Company Name
The Lawton Tube Company Ltd.
Address
Torrington Avenue, Coventry
Postcode
CV4 9AB
Country
United Kingdom
Phone
+44 24 7646 6203 or 024 7646 6203
General Email
mlis@lawtontubes.co.uk

View All Listings by this Company

WRAS Approval Number: #251004715

Electric instantaneous, vented, mains water heater. Maximum operating temperature 98°C.

Section:: 1365 Heaters
Section Subtitle:: Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:: 251004715
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet use only.
Size:: 6.35mm pushfit.
Marking:: Hanstrom printed on front cover.
Installation Requirements:: R001 R008 R040
Expiry date:: 31/10/2030
Model:: S3-H010, S3-H020, NX00B01, S3-H070, S3-H110.

Approval Holder:: Hanstrom Ltd

Company Name
Hanstrom Ltd
Address
1205 Aster House North Wharf Road London
Phone
07950 919161
General Email
accounts@theflipstock.com

View All Listings by this Company

WRAS Approval Number: #251004716

Electric instantaneous, vented, mains water heater. Maximum operating temperature 98°C.

Section:: 1365 Heaters
Section Subtitle:: Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:: 251004716
Basis of Compliance:: Tested to regulators Specification Test Code Sheets
Note:: Open outlet use only.
Size:: 6.35mm pushfit.
Marking:: Wodar on front cover.
Installation Requirements:: R001 R008 R040
Expiry date:: 31/10/2030
Model:: S2-H010, BN-H0110, S2-H030, S2-H070, S2-H110.

Approval Holder:: Wodar Ltd

Company Name
Wodar Ltd
Address
11C Stephenson Road Clacton on Sea Essex
Postcode
CO15 4XA
Country
United Kingdom
Phone
07894 606234
General Email
michael@wodar.com

View All Listings by this Company