Directory Search Results

Print List

#2309366

Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2309366
Size:
See model.
Marking:
Lawton tubes logo, EN1254 and size on body.
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
EFBTC0151/2: 15MM X 1/2" Bent Tap Connector EF, EFBTC0223/4: 22MM X 3/4" Bent Tap Connector EF, EFCOFI0151/2: 15MM X 1/2" Female Adaptor Brass EF, EFCOFI0153/4: 15MM X 3/4" Female Adaptor Brass EF, EFCOFI0221/2: 22MM X 1/2" Female Adaptor Brass EF, EFCOFI0223/4: 22MM X 3/4" Female Adaptor Brass EF, EFCOFI0281: 28MM X 1" Female Adaptor Brass EF, EFCOFI0283/4: 28MM X 3/4" Female Adaptor Brass EF, EFCOFI03511/4: 35MM X 1.1/4" Female Adaptor Brass EF, EFCOFI04211/2: 42MM X 1.1/2" Female Adaptor Brass EF, EFCOFI0542: 54MM X 2" Female Adaptor Brass EF, EFCOFI06721/2: 66.7MM X 2.1/2" Female Adaptor Brass EF, EFCOFI0763: 76MM X 3" Female Adaptor Brass EF, EFCOFI1084: 108MM X 4" Female Adaptor Brass EF, EFCOMI0151/2: 15MM X 1/2" Male Adaptor Brass EF, EFCOMI0223/4: 22MM X 3/4" Male Adaptor Brass EF, EFCOMI0281: 28MM X 1" Male Adaptor Brass EF, EFCOMI03511/4: 35MM X 1.1/4" Male Adaptor Brass EF, EFCOMI04211/2: 42MM X 1.1/2" Male Adaptor Brass EF, EFCOMI0542: 54MM X 2" Male Adaptor Brass EF, EFCOMI06721/2: 66.7MM X 2.1/2" Male Adaptor Brass EF, EFCOMI0763: 76MM X 3" Male Adaptor Brass EF, EFCOMI1084: 108MM X 4" Male Adaptor Brass EF, EFCP008: 8MM Coupler EF, EFCP010: 10MM Coupler EF, EFCP015: 15MM Coupler EF, EFCP022: 22MM Coupler EF, EFCP028: 28MM Coupler EF, EFCP035: 35MM Coupler EF, EFCP042: 42MM Coupler EF, EFCP054: 54MM Coupler EF, EFCP067: 66.7MM Coupler EF, EFCP076: 76.1MM Coupler EF, EFCP108: 108MM Coupler EF, EFCP133: 133MM Coupler EF, EFCP159: 159MM Coupler EF, EFCP219: 219MM Coupler EF, EFCP0108: 10MM X 8MM Reducer Coupler EF, EFCP01510: 15MM X 10MM Reducer Coupler EF, EFCP01512: 15MM X 12MM Reducer Coupler EF, EFCP0158: 15MM X 8MM Reducer Coupler EF, EFCP02215: 22MM X 15MM Reducer Coupler EF, EFCP02815: 28MM X 15MM Reducer Coupler EF, EFCP02822: 28MM X 22MM Reducer Coupler EF, EFCP03528: 35MM X 28MM Reducer Coupler EF, EFCP04235: 42MM X 35MM Reducer Coupler EF, EFCP05422: 54MM X 22MM Reducer Coupler EF, EFCP05442: 54MM X 42MM Reducer Coupler EF, EFCP06728: 66.7MM X 28MM Reducer Coupler EF, EFCP06754: 66.7MM X 54MM Reducer Coupler EF, EFCP07635: 76.1MM X 35MM Reducer Coupler EF, EFCP07642: 76.1MM X 42MM Reducer Coupler EF, EFCP07654: 76.1MM X 54MM Reducer Coupler EF, EFCP07667: 76.1MM X 66.7MM Reducer Coupler EF, EFCP10854: 108MM X 54MM Reducer Coupler EF, EFCP10867: 108MM X 66.7MM Reducer Coupler EF, EFCP10876: 108MM X 76.1MM Reducer Coupler EF, EFCP0151/2: 15MM X 1/2" Adaptor Coupler (Metric/Imperial) EF, EFCP0223/4: 22MM X 3/4" Adaptor Coupler (Metric/Imperial) EF, EFCP0281: 28MM X 1" Adaptor Coupler (Metric/Imperial) EF, EFCP03511/4: 35MM X 1.1/4" Adaptor Coupler (Metric/Imperial) EF, EFCU0221: 22MM X 1" Straight Cylinder Union EF, EFCU0281: 28MM X 1" Straight Cylinder Union EF, EFEC008: 8MM End Cap EF, EFEC010: 10MM End Cap EF, EFEC012: 12MM End Cap EF, EFEC015: 15MM End Cap EF, EFEC022: 22MM End Cap EF, EFEC028: 28MM End Cap EF, EFEC035: 35MM End Cap EF, EFEC042: 42MM End Cap EF, EFEC054: 54MM End Cap EF, EFEC067: 66.7MM End Cap EF, EFEC076: 76.1MM End Cap EF, EFEC108: 108MM End Cap EF, EFEC133: 133MM End Cap EF, EFEC159: 159MM End Cap EF, EFEL008: 8MM 90° Elbow EF, EFEL010: 10MM 90° Elbow EF, EFEL015: 15MM 90° Elbow EF, EFEL022: 22MM 90° Elbow EF, EFEL028: 28MM 90° Elbow EF, EFEL035: 35MM 90° Elbow EF, EFEL042: 42MM 90° Elbow EF, EFEL054: 54MM 90° Elbow EF, EFEL067: 66.7MM 90° Elbow EF, EFEL076: 76.1MM 90° Elbow EF, EFEL108: 108MM 90° Elbow EF, EFEL133: 133MM 90° Elbow EF, EFEL159: 159MM 90° Elbow EF, EFEL219: 219MM 90° Elbow EF, EFELFI0151/2: 15MM X 1/2" Female Elbow Brass EF, EFELFI0221/2: 22MM X 1/2" Female Elbow Brass EF, EFELFI0223/4: 22MM X 3/4" Female Elbow Brass EF, EFELFI0281: 28MM X 1" Female Elbow Brass EF, EFELLR015: 15MM Long Radius 90° Elbow EF, EFELLR022: 22MM Long Radius 90° Elbow EF, EFELLR028: 28MM Long Radius 90° Elbow EF, EFELLR067: 66.7MM Long Radius 90° Elbow EF, EFELLR076: 76.1MM Long Radius 90° Elbow EF, EFELLR108: 108MM Long Radius 90° Elbow EF, EFELMI0151/2: 15MM X 1/2" Male Elbow Brass EF, EFELMI0223/4: 22MM X 3/4" Male Elbow Brass EF, EFELMI0281: 28MM X 1" Male Elbow Brass EF, EFELS015: 15MM 90° Street Elbow EF, EFELS022: 22MM 90° Street Elbow EF, EFELS028: 28MM 90° Street Elbow EF, EFELS035: 35MM 90° Street Elbow EF, EFELS042: 42M 90° Street Elbow EF, EFELS054: 54MM 90° Street Elbow EF, EFELSLT015: 15MM 90° Long Tail Street Elbow EF, EFELSLT022: 22MM 90° Long Tail Street Elbow EF, EFELWC0151/2: 15MM X 1/2" Gas Connector Elbow Brass EF, EFELWL0151/2: 15MM X 1/2" Wallplate Elbow Brass EF, EFELWL0223/4: 22MM X 3/4" Wallplate Elbow Brass EF, EFEL00845: 8MM X 45° Elbow EF, EFEL01045: 10MM X 45° Elbow EF, EFEL01545: 15MM X 45° Elbow EF, EFEL02245: 22MM X 45° Elbow EF, EFEL02845: 28MM X 45° Elbow EF, EFEL03545: 35MM X 45° Elbow EF, EFEL04245: 42MM X 45° Elbow EF, EFEL05445: 54MM X 45° Elbow EF, EFEL06745: 66.7MM X 45° Elbow EF, EFEL07645: 76.1MM X 45° Elbow EF, EFEL10845: 108MM X 45° Elbow EF, EFEL13345: 133MM X 45° Elbow EF, EFEL15945: 159MM X 45° Elbow EF, EFEL21945: 219MM X 45° Elbow EF, EFELS01545: 15MM X 45° Street Elbow EF, EFELS02245: 22MM X 45° Street Elbow EF, EFELS02845: 28MM X 45° Street Elbow EF, EFELS03545: 35MM X 45° Street Elbow EF, EFELS04245: 42MM X 45° Street Elbow EF, EFELS05445: 54MM X 45° Street Elbow EF, EFELS06745: 66.7MM X 45° Street Elbow EF, EFELS07645: 76.1MM X 45° Street Elbow EF, EFFCO015: 15MM Full Crossover EF, EFFCO022: 22MM Full Crossover EF, EFFCO028: 28MM Full Crossover EF, EFPCO015: 15MM Part Crossover EF, EFPCO022: 22MM Part Crossover EF, EFRED0108: 10MM X 8MM Fitting Reducer EF, EFRED01510: 15MM X 10MM Fitting Reducer EF, EFRED0158: 15MM X 8MM Fitting Reducer EF, EFRED02215: 22MM X 15MM Fitting Reducer EF, EFRED02815: 28MM X 15MM Fitting Reducer EF, EFRED02822: 28MM X 22MM Fitting Reducer EF, EFRED03515: 35MM X 15MM Fitting Reducer EF, EFRED03522: 35MM X 22MM Fitting Reducer EF, EFRED03528: 35MM X 28MM Fitting Reducer EF, EFRED04215: 42MM X 15MM Fitting Reducer EF, EFRED04222: 42MM X 22MM Fitting Reducer EF, EFRED04228: 42MM X 28MM Fitting Reducer EF, EFRED04235: 42MM X 35MM Fitting Reducer EF, EFRED05415: 54MM X 15MM Fitting Reducer EF, EFRED05422: 54MM X 22MM Fitting Reducer EF, EFRED05428: 54MM X 28MM Fitting Reducer EF, EFRED05435: 54MM X 35MM Fitting Reducer EF, EFRED05442: 54MM X 42MM Fitting Reducer EF, EFRED06728: 66.7MM X 28MM Fitting Reducer EF, EFRED06735: 66.7MM X 35MM Fitting Reducer EF, EFRED06742: 66.7MM X 42MM Fitting Reducer EF, EFRED06754: 66.7MM X 54MM Fitting Reducer EF, EFRED07635: 76.1MM X 35MM Fitting Reducer EF, EFRED07642: 76.1MM X 42MM Fitting Reducer EF, EFRED07654: 76.1MM X 54MM Fitting Reducer EF, EFRED07667: 76.1MM X 66.7MM Fitting Reducer EF, EFRED10842: 108MM X 42MM Fitting Reducer EF, EFRED10854: 108MM X 54MM Fitting Reducer EF, EFRED10867: 108MM X 66.7MM Fitting Reducer EF, EFRED10876: 108MM X 76.1MM Fitting Reducer EF, EFRED133108: 133MM X 108MM Fitting Reducer EF, EFRED13367: 133MM X 66.7MM Fitting Reducer EF, EFRED13376: 133 X 76.1MM Fitting Reducer EF, EFRED159108: 159MM X 108MM Fitting Reducer EF, EFRED159133: 159MM X 133MM Fitting Reducer EF, EFRED15976: 159MM X 76.1MM Fitting Reducer EF, EFRED219159: 219MM X 159MM Fitting Reducer EF, EFREDLT01510: 15MM X 10MM Long Tail Fitting Reducer EF, EFREDLT0158: 15MM X 8MM Long Tail Fitting Reducer EF, EFSC015: 15MM Slip Coupler EF, EFSC022: 22MM Slip Coupler EF, EFSC028: 28MM Slip Coupler EF, EFSC035: 35MM Slip Coupler EF, EFSC042: 42MM Slip Coupler EF, EFSC054: 54MM Slip Coupler EF, EFSTC0151/2: 15MM X 1/2" Straight Tap Connector EF, EFSTC0153/4: 15MM X 3/4" Straight Tap Connector EF, EFSTC0223/4: 22MM X 3/4" Straight Tap Connector EF, EFTE008: 8MM Equal Tee EF, EFTE010: 10MM Equal Tee EF, EFTE015: 15MM Equal Tee EF, EFTE022: 22MM Equal Tee EF, EFTE028: 28MM Equal Tee EF, EFTE035: 35MM Equal Tee EF, EFTE042: 42MM Equal Tee EF, EFTE054: 54MM Equal Tee EF, EFTE067: 66.7MM Equal Tee EF, EFTE076: 76.1MM Equal Tee EF, EFTE108: 108MM Equal Tee EF, EFTE133: 133MM Equal Tee EF, EFTE159: 159MM Equal Tee EF, EFTE219: 219MM Equal Tee EF, EFTE0151508: 15MM X 15MM X 8MM Reducer Tee EF, EFTE0151510: 15MM X 15MM X 10MM Reducer Tee EF, EFTE0151522: 15MM X 15MM X 22MM Reducer Tee EF, EFTE0221515: 22MM X 15MM X 15MM Reducer Tee EF, EFTE0221522: 22MM X 15MM X 22MM Reducer Tee EF, EFTE0222215: 22MM X 22MM X 15MM Reducer Tee EF, EFTE0222228: 22MM X 22MM X 28MM Reducer Tee EF, EFTE0281515: 28MM X 15MM X 15MM Reducer Tee EF, EFTE0281528: 28MM X 15MM X 28MM Reducer Tee EF, EFTE0282215: 28MM X 22MM X 15MM Reducer Tee EF, EFTE0282222: 28MM X 22MM X 22MM Reducer Tee EF, EFTE0282228: 28MM X 22MM X 28MM Reducer Tee EF, EFTE0282815: 28MM X 28MM X 15MM Reducer Tee EF, EFTE0282822: 28MM X 28MM X 22MM Reducer Tee EF, EFTE0282835: 28MM X 28MM X 35MM Reducer Tee EF, EFTE0351535: 35MM X 15MM X 35MM Reducer Tee EF, EFTE0352222: 35MM X 22MM X 22MM Reducer Tee EF, EFTE0352235: 35MM X 22MM X 35MM Reducer Tee EF, EFTE0352822: 35MM X 28MM X 22MM Reducer Tee EF, EFTE0352828: 35MM X 28MM X 28MM Reducer Tee EF, EFTE0352835: 35MM X 28MM X 35MM Reducer Tee EF, EFTE0353515: 35MM X 35MM X 15MM Reducer Tee EF, EFTE0353522: 35MM X 35MM X 22MM Reducer Tee EF, EFTE0353528: 35MM X 35MM X 28MM Reducer Tee EF, EFTE0421542: 42MM X 15MM X 42MM Reducer Tee EF, EFTE0422242: 42MM X 22MM X 42MM Reducer Tee EF, EFTE0422828: 42MM X 28MM X 28MM Reducer Tee EF, EFTE0422842: 42MM X 28MM X 42MM Reducer Tee EF, EFTE0423528: 42MM X 35MM X 28MM Reducer Tee EF, EFTE0423535: 42MM X 35MM X 35MM Reducer Tee EF, EFTE0423542: 42MM X 35MM X 42MM Reducer Tee EF, EFTE0424215: 42MM X 42MM X 15MM Reducer Tee EF, EFTE0424222: 42MM X 42MM X 22MM Reducer Tee EF, EFTE0424228: 42MM X 42MM X 28MM Reducer Tee EF, EFTE0424235: 42MM X 42MM X 35MM Reducer Tee EF, EFTE0544242: 54MM X 42MM X 42MM Reducer Tee EF, EFTE0544254: 54MM X 42MM X 54MM Reducer Tee EF, EFTE0545415: 54MM X 54MM X 15MM Reducer Tee EF, EFTE0545422: 54MM X 54MM X 22MM Reducer Tee EF, EFTE0545428: 54MM X 54MM X 28MM Reducer Tee EF, EFTE0545435: 54MM X 54MM X 35MM Reducer Tee EF, EFTE0545442: 54MM X 54MM X 42MM Reducer Tee EF, EFTE0676728: 66.7MM X 66.7MM X 28MM Reducer Tee EF, EFTE0676735: 66.7MM X 66.7MM X 35MM Reducer Tee EF, EFTE0676742: 66.7MM X 66.7MM X 42MM Reducer Tee EF, EFTE0676754: 66.7MM X 66.7MM X 54MM Reducer Tee EF, EFTE0767628: 76.1MM X 76.1MM X 28MM Reducer Tee EF, EFTE0767635: 76.1MM X 76.1MM X 35MM Reducer Tee EF, EFTE0767642: 76.1MM X 76.1MM X 42MM Reducer Tee EF, EFTE0767654: 76.1MM X 76.1MM X 54MM Reducer Tee EF, EFTE0767667: 76.1MM X 76.1MM X 66.7MM Reducer Tee EF, EFTE10810835: 108MM X 108MM X 35MM Reducer Tee EF, EFTE10810842: 108MM X 108MM X 42MM Reducer Tee EF, EFTE10810854: 108MM X 108MM X 54MM Reducer Tee EF, EFTE10810867: 108MM X 108MM X 66.7MM Reducer Tee EF, EFTE10810876: 108MM X 108MM X 76.1MM Reducer Tee EF, EFTE159159108: 159MM X 159MM X 108MM Reducer Tee EF, EFTE159159133: 159MM X 159MM X 133MM Reducer Tee EF, EFTE15915976: 159MM X 159MM X 76.1MM Reducer Tee EF, EFTEFI015151/2: 15MM X 15MM X 1/2" Reducer Tee Brass EF, EFTEFI022221/2: 22MM X 22MM X 1/2" Reducer Tee Brass EF, EFTEFI022223/4: 22MM X 22MM X 3/4" Reducer Tee Brass EF, EFTEFI028281: 28MM X 28MM X 1" Reducer Tee Brass EF, EFTEFI028281/2: 28MM X 28MM X 1/2" Reducer Tee Brass EF, EFUNF0151/2: 15MM X 1/2" Female Union Adaptor Brass EF, EFUNF0223/4: 22MM X 3/4" Female Union Adaptor Brass EF, EFUNF0281: 28MM X 1" Female Union Adaptor Brass EF, EFUNF03511/4: 35MM X 1.1/4" Female Union Adaptor Brass EF, EFUNF04211/2: 42MM X 1.1/2" Female Union Adaptor Brass EF, EFUNF0542: 54MM X 2" Female Union Adaptor Brass EF, EFUNM0151/2: 15MM X 1/2" Male Union Adaptor Brass EF, EFUNM0223/4: 22MM X 3/4" Male Union Adaptor Brass EF, EFUNM0281: 28MM X 1" Male Union Adaptor Brass EF, EFUNM03511/4: 35MM X 1.1/4" Male Union Adaptor Brass EF, EFUNM04211/2: 42MM X 1.1/2" Male Union Adaptor Brass EF, EFUNM0542: 54MM X 2" Male Union Adaptor Brass EF, EFUNM06721/2: 67MM X 2.1/2" Male Union Adaptor Brass EF, EFUNM0763: 76MM X 3" Male Union Adaptor Brass EF.
Product Images

Approval Holder:
Lawton Tube Company Limited.
Company Name
Lawton Tube Company Limited.
Address
Torrington Avenue Tile Hill Coventry
Postcode
CV4 9AB

View All Listings by this Company

Print This Approval


#2309005

Dual flush WC drop valve with an internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2309005
Size:
2” BSP (M)
Marking:
Fluidmaster and WRAS on body
Installation Requirements:
R001 R571 R580 R581
Expiry date:
30/09/2028
Model:
821WB-FEP

Approval Holder:
Fluidmaster, Inc.
Company Name
Fluidmaster, Inc.
Address
30800 Rancho Viejo Road San Juan Capistrano
Postcode
CA 92675
Country
United States
Phone
1-949-796-2653
General Email
jloera@fluidmaster.com

View All Listings by this Company

Print This Approval


#2309032

Dual flush WC outlet valve with ABS body. The valve incorporates an internal overflow and is operated via a push button assembly for either full or reduced flush. Maximum operating temperature – Cold water use only.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2309032
Size:
2” BSP (M)
Marking:
Oceanwell Xiamen industrial company and model on body
Installation Requirements:
R001 R571 R580 R581
Expiry date:
30/09/2028
Model:
D33-J318-01

Approval Holder:
OceanWell (Xiamen) Industrial Co Ltd
Company Name
OceanWell (Xiamen) Industrial Co Ltd
Address
No. 33, Shishan North Road, Dongfu Town Haicang District., Xiamen Province, P.R China

View All Listings by this Company
Manufacturer:
OceanWell (Xiamen) Industrial Co Ltd
Company Name
OceanWell (Xiamen) Industrial Co Ltd
Address
No. 33, Shishan North Road, Dongfu Town Haicang District., Xiamen Province, P.R China

View All Listings by this Company

Print This Approval


#2309365

Range of under counter, vented, electric instantaneous (near boiling) water heaters with a stainless steel tank and silicone seals. Maximum operating temperature 98°C.

Section:
1365 Heaters
Section Subtitle:
Electric instantaneous, open outlet, mains fed.
WRAS Approval Number:
2309365
Note:
Open outlet use only.
Size:
8mm pushfit.
Marking:
E-Tec on adhesive label on rear of body.
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
B132001 (Grey), B100-B-XXX (Black), B100-W-XXX (White).
Product Images

Approval Holder:
Xiamen E-Tec Electric Shower Co., LTD
Company Name
Xiamen E-Tec Electric Shower Co., LTD
Address
No.11, HaiJing East 2nd Road, Xiamen Area of China (Fujian) Pilot Free Trade Zone.

View All Listings by this Company

Print This Approval


#2309044

Range of wall mounted combination boilers providing domestic hot water via a heat exchanger and pressurised central heating system. The products can be supplied with a rigid or flexible filling loop or keyless filling link. The flexible and rigid filling loops incorporate a flexible hose or copper pipe, isolation valve, double check valve assembly (suitable for back flow protection against fluid category 3). The keyless filling link incorporates a CAB backflow prevention device (suitable for back flow protection against fluid category 3). The products also incorporate an expansion vessel and pressure relief valve set at 3.0 bar. Maximum working pressure of primary circuit 2.5 bar. Maximum operating temperature of primary circuit 85°C Maximum working pressure of secondary circuit 8.0 bar Maximum operating temperature of secondary circuit 60°C

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2309044
Note:
When installing the keyless filling link, the discharge from the relief outlet port of this fitting must be made via a type AA, AB or AD air gap, or in accordance with EN 1717.
Size:
¾” BSP (M) (primary circuit). ½” BSP (M) (secondary circuit).
Marking:
Baxi on front cover.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2028
Model:
7796586 BAXI 624 COMBI 2 7796587 BAXI 630 COMBI 2 7796588 BAXI 636 COMBI 2 7813609 BAXI 624 COMBI LPG 2 7814304 BAXI 824 COMBI 2 7814305 BAXI 830 COMBI 2 7814306 BAXI 836 COMBI 2 7814307 BAXI 830 COMBI LPG 2 7814308 BAXI 836 COMBI LPG 2 7814309 BAXI ASSURE 524 COMBI 2 7814310 BAXI ASSURE 530 COMBI 2 7814311 BAXI ASSURE 536 COMBI 2 7814312 BAXI ASSURE 530 COMBI LPG 2

Approval Holder:
Baxi Heating UK Limited
Company Name
Baxi Heating UK Limited
Address
Brooks House, Coventry Road, Warwick
Postcode
CV34 3LL

View All Listings by this Company

Print This Approval


#2307329

Preheat accessory assembly for connection to the domestic hot water circuit of a combination boiler. Incorporates flow sensor, flow restrictor, flow silencers, pre-heat sensor and filter. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1478 Heater
Section Subtitle:
Combination boilers - accessories and components.
WRAS Approval Number:
2307329
Size:
15mm compression.
Marking:
Bosch and date of manufacture (MM/YY).
Installation Requirements:
R001
Expiry date:
31/07/2028
Model:
7-716-192-735: GREENSTAR CDI COMPACT ERP DHW Solar Pre-Heat Kit.
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#2309341

DZR brass elbow fitting. Compression connection to be used with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1478 Heater
Section Subtitle:
Combination boilers - accessories and components.
WRAS Approval Number:
2309341
Size:
½” captive nut x 15mm compression.
Marking:
Pintossi logo (letters ‘Pc’) and CR on body.
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
5624D 1/2xØ15 (Model no. 0562431215).
Product Images

Approval Holder:
PINTOSSI+C SPA
Company Name
PINTOSSI+C SPA
Address
VIA INDUSTRIALE 44 LUMEZZANE (BRESCIA) Italy
Postcode
25065
Country
Italy
Phone
+39 030 373 3138
General Email
alessandra@pintossi.it

View All Listings by this Company
Manufacturer:
PINTOSSI+C SPA
Company Name
PINTOSSI+C SPA
Address
VIA INDUSTRIALE 44 LUMEZZANE (BRESCIA) Italy
Postcode
25065
Country
Italy
Phone
+39 030 373 3138
General Email
alessandra@pintossi.it

View All Listings by this Company

Print This Approval


#2309337

Range of ultrasonic water meters with brass bodies and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C

Section:
1505 Water Meters
Size:
¾”BSP(M)
Marking:
Huizhong logo etched on face plate.
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
SCL-61H-100-E DN15, DN20, DN25, DN32, DN40
Product Images

Approval Holder:
Huizhong Instrumentation Co., Ltd.
Company Name
Huizhong Instrumentation Co., Ltd.
Address
No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province
Country
China

View All Listings by this Company
Manufacturer:
Huizhong Instrumentation Co., Ltd.
Company Name
Huizhong Instrumentation Co., Ltd.
Address
No. 126 West Gaoxin Road, High‐Tech Industrial Development Zone, Tangshan City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval


#2309343

Range of circulating pumps with a bronze body, plastic impeller and EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2309343
Size:
1” BSP (M) or 1½” BSP (M).
Marking:
Rating plate on body including: Wilo, class, PN, model no. and date of production (YYWW).
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
Z Range: Z15/6-* **130**, Z15/7-* **130**, Z20/2-* **130**, Z20/2-* **140**, Z20/5-* **140**, Z20/6-* **140**, Z20/7-* **140**, Z25/6-* **180**, Z25/7-* **180**. Where: 15/20/25 = connection size: 15 or 20 = 1” BSP (M), 25 = 1½” BSP (M). 2/5/6/7 = motor power (head in mWC). * = speed number: 1,2 or 3. 1st ** = electrical connection: PL, PR, CLR, CLF, CRR, CRF, FSL, FSR. 130/140/180 = Pump body dimension (height in mm). 2nd ** = terminal box position: 12,3,6 or 9 o’clock. Example code: Z25/6-3 PL 180 12.
Product Images

Approval Holder:
WILO INTEC
Company Name
WILO INTEC
Address
50 Avenue Eugene Casella, Aubigny sur nere
Postcode
18700
Country
France
Phone
+332 48 81 62 62
General Email
franck.guillaume@wilo.com

View All Listings by this Company

Print This Approval


#2309919

‘SCALA1’ range of booster pumps with plastic bodies, plastic impellers, EPDM and NBR ‘O’-rings. The product incorporates a non-return valve. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2309919
Note:
Cold water use only.
Size:
1” BSP (M) inlet/outlet.
Marking:
Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, model no., and other technical information on adhesive label on body.
Installation Requirements:
R001 R415
Expiry date:
30/09/2028
Model:
SCALA1 3-25. SCALA1 3-35. SCALA1 3-45. SCALA1 5-25. SCALA1 5-35. SCALA1 5-55. Where 3 or 5 = flow rate in m³/h, 25-55 = max. head (m).

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

Print This Approval


#2308900

Range of shower rail kits, (chrome plated - plastic bodies) incorporating a shower handset, shower hose and adjustable shower rail. Maximum operating temperature 80°C. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 80°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2308900
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
PPI ETCHED ONTO REAR OF HANDSET BODY & PPI, WRAS & YEAR OF MANUFACTURE (YYYY) ON FERRULE OF HOSE
Installation Requirements:
R001 R040
Expiry date:
31/08/2028
Model:
736305

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#2308902

Range of shower rail kits, (chrome plated - plastic bodies) incorporating a shower handset, shower hose and adjustable shower rail. Maximum operating temperature 80°C. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 80°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2308902
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
NABIS ON HANDSET
Installation Requirements:
R001 R040
Expiry date:
31/08/2028
Model:
A05050* NAB

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval


#2309016

Range of shower handsets with (plastic bodies - various finishes, see models) incorporating a stainless-steel strainer on the inlet.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2309016
Note:
Open outlet use only.
Size:
½” BSP (M) inlets
Marking:
Hansgrohe logo on body
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
26 807 xxx 26 807 670 Where xx0 denotes the surface finish it will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2309300

Range of shower outlets with plastic bodies (chromium finish). Incorporates flow a regulator. Claims of flow rate made by the manufacture on flow rate are not part of this approval. Maximum operating temperature 85°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2309300
Note:
Open outlet use only. Claims of flow rate made by the manufacture on flow rate are not part of this approval.
Size:
½” BSP
Marking:
Kohler on body
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
26284W-CP & 26284W-G-CP shower outlets
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#2309302

Range of shower outlets having plastic bodies, various finishes Maximum operating temperature 55°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2309302
Note:
Open outlet use only
Size:
½” BSP.
Marking:
Mira on body.
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
1501943 – White shower handset, 1501856 – Chromium plated shower handset, 1499173 – Chromium plated overhead shower. Model added February 2024 1501981 - Chromium plated overhead shower
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#2309319

Wall mounted shower heads and arms with chromium plated brass bodies. Maximum working temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2309319
Note:
Open outlet
Size:
1/2” BSP (M).
Marking:
Grohe on faceplate.
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
Rainshower Cosmopolitan 310 - 26.056, incorporating: Rainshower Veris 310 - 27.477 & Rainshower - 28.361.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2309322

Range of ceiling mounted, shower outlets with chrome plated brass bodies, EPDM seals, stainless steel strainer and flow regulator in the inlets. Supplied with a flexible hose. Maximum working temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2309322
Size:
Stainless steel braided PEX hose with ½” BSP captive nut end connection.
Marking:
Grohe on Body.
Installation Requirements:
R001 R009 R040
Expiry date:
30/09/2028
Model:
27.863 – RAINSHOWER ALLURE 230.
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2309324

Wall mounted shower heads and arms with chromium plated brass bodies. Supplied with plastic strainer. Maximum working temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2309324
Note:
Open outlet use only.
Size:
½” BSP (M)
Marking:
Grohe on spray base.
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
27.470 - Rainshower Veris (to be installed with Grohe shower arm, product no. 28.576).
Product Images

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2309325

‘Grohe Euphoria 180’ overhead shower outlet with a chromium plated brass body incorporating a plastic flow regulator. Maximum working temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2309325
Note:
Open outlet use only.
Size:
½” BSP (F)
Marking:
Grohe on shower face.
Installation Requirements:
R001 R040
Expiry date:
30/09/2028
Model:
27.492 Euphoria Cosmopolitan 180.

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#2205711

Range of shower outlets incorporating brass bodies (various finishes) and NBR ‘O’-rings. Maximum operating temperature 85°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2205711
Note:
Open outlet use only
Size:
⅜”, ½” and ¾” BSP (F) (all models)
Marking:
Crosswater logo on body.
Installation Requirements:
R001 R040
Expiry date:
31/05/2027
Model:
FH08x+, FH12x, FH08x_EC, PRI08x, PRI08x_EC, WF08x & WF08x_EC Where x denotes finish and can be replaced by: C – Chrome, V - stainless steel effect, F - brushed brass, M - matt black, A – anthracite, W – white, B - brushed black chrome, N - polished nickel, L - brushed nickel, Q - unlacquered brass, RG - rose gold, BGR - brushed rose gold, P – copper, BP – Brushed Copper, AP – Antique Copper, S – stainless Steel, SF – Stainless Steel Brass Effect, SM – Black Stainless Steel, G – gunmetal, UB – unlacquered brushed brass, Z – Bronze, AZ – Antique Bronze, BZ - Brushed Bronze, GR – Graphite & G- Gold & T- Slate

Approval Holder:
Crosswater Ltd.
Company Name
Crosswater Ltd.
Address
Lake View House, Rennie Drive, Dartford.
Postcode
DA1 5FU
Country
United Kingdom
Phone
01322 475 739
General Email
david.cheshire@bathroombrands.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 191 of 390

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.