Section Code 2010 : Shower valve(s) with thermostatic temperature control
Back To Directory SectionsRange of concealed thermostatic valves with thermostatic cartridges. Models SHO001PL, SHO032VI, SHO042KL, SHO141OT, SHO020LO，SHO026PR， SHO009EL，SHO045NR, SHO047NS, SHO000PL，SHO041KL & SHO025PU consist of quarter turn ceramic disc headworks controlling the flow and the temperature is controlled independently via thermostatic cartridge. Models SHO010EL SHO002PL,SHO033VI, SHO043KL SHO142OT， SHO021LO, SHO027PR, SHO046NR & SHO049NS consists of a two-way diverter cartridge controlling the flow and a thermostatic cartridge controlling the temperature. Model SHO012PR consists of a three-way diverter cartridge controlling the direction of flow, a thermostatic cartridge controlling the temperature and a quarter turn ceramic disc controlling the flow. All models incorporate cube, dome, cross-top or single lever type operating members. The inlets incorporate stainless steel strainers and single check valve cartridges; however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, bar type, thermostatic shower blending valves (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member incorporating a manual override button. Both inlets incorporate a stainless steel strainer and an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted, bar type thermostatic blending valves (chromium plated brass) incorporating a quarter turn ceramic disc headwork controlling the flow with a cube operating member incorporating a manual override button. The temperature is controlled by a thermostatic cartridge with dome or cube type operating member incorporating a manual override button. Both inlets incorporate a stainless-steel strainer and single check valve cartridge (however, the complete product has not been fully tested to demonstrate it provides backflow protection). Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.
Range of wall mounted bar type thermostatic shower mixers (chromium plated brass), incorporating a ¼ turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge incorporating a manual override button. Grohetherm 800 & 1000 models have single lever operating members and the Grohetherm 1000 Cosmopolitan models have dome type operating members. 34.146.003 and 34.561 models incorporate single check valve cartridges (however, the complete product has not been fully tested to demonstrate it provides backflow protection) and stainless steel strainers on the inlets. All other models incorporate stainless steel strainers and single check valve cartridges on the inlets, as well as a single check valve cartridge on the shower outlet (however, the complete product has not been fully tested to demonstrate it provides backflow protection). 34.438.003 and 34.562 models also incorporate a flow regulator on the shower outlet. Maximum working pressure 10.0 Bar. Maximum operating temperature 60°C.
Non-metallic materials and components comply with BS6920 at 60°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models VAH0347 - 5059340245775 & VAH0348 - 5059340245782 both 60°C
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models 86345023 & 86345034 both 60°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets of all models incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression fitting connection to be used with copper pipe EN1057 only. Maximum working pressure 10 bar. Maximum operating temperature 85°C except for models 623224 & 623229 both 60°C.
Range of wall mounted thermostatic shower valves, (chrome plated brass bodies) incorporating spindle headworks controlling the flow with single lever operating member. The temperature is controlled independently via a thermostatic cartridge with a cross-top operating member. The inlets incorporate flow regulators and approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection). The products are supplied with a shower kit consisting of a wall mounted elbow, overhead shower and a riser rail assembly. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted thermostatic shower valve (chrome plated brass), incorporating a ceramic disc diverter cartridge controlling the flow from shower to shower with a cube operating member. The temperature is controlled independently via a thermostatic cartridge, with a cube operating member, that also incorporates a manual override button. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. The inlets incorporate approved check valve cartridges, (however, the complete product has not been fully tested to demonstrate that it provides backflow protection), chrome plated spherical ball valves and stainless-steel strainers with EPDM gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Range of T-type thermostatic blending valves with chromium plated brass bodies. Temperature is controlled via a thermostatic cartridge. The inlets incorporate single check valve cartridges (verified by test - suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. models HVTMV-15IV & HVTMV-22IV are also fitted with brass isolating elbows. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.
Wall mounted blending thermostatic shower valve (chrome plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge. Both using cube type operating members. The inlets incorporate approved check valve cartridges; however, the complete assembly has not been tested to demonstrate it provides backflow protection. The inlets also incorporate ¾” BSP (M) x 15mm compression (chrome plated) spherical ball valves and EPDM washers incorporating stainless steel mesh strainers. The product is supplied with a chrome plated shower handset, shower hose and riser rail assembly. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.
Wall mounted, exposed, thermostatic blending valve with a brass body (various finishes). The flow is controlled via a quarter turn ceramic disc with a dome type operating member. The temperature is controlled independently via a thermostatic cartridge with a dome type operating member which incorporates a manual override button. Both inlets incorporate a stainless-steel strainer and a single check valve cartridge, however the complete product has not been fully tested to demonstrate It provides backflow protection. Product is not supplied with shower hose of handset. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Wall mounted thermostatic shower valve (brass body - various finishes and trim sets), incorporating a thermostatic cartridge controlling the flow and temperature with a single lever or cross top operating members with a manual override button. The inlets incorporate a stainless-steel strainers and approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar
Non-metallic materials and components comply with BS6920 at 85°C
Wall mounted, bar type thermostatic shower valve (chromium plated brass), incorporating a quarter turn ceramic disc headwork controlling the flow using single lever operating members incorporating a manual override. The temperature is controlled independently via a thermostatic cartridge, using a single lever operating member incorporating a manual override button. The inlets incorporate stainless steel strainers and approved single check valve cartridges, however, the complete product has not been fully tested to demonstrate that it provides backflow protection. Maximum working pressure 10.0 Bar
Non-metallic materials and components comply with BS6920 at 60°C
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies and manually adjustable temperature control. The inlets of the press fit and push fit models incorporate a stainless-steel strainer and an approved check valve cartridge, however, the complete products have not been fully tested to demonstrate they provide backflow protection. Press fit and push fit connections are for use with copper pipe (manufactured to EN1057). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of wall mounted, bar type thermostatic shower valves (brass body – various finishes), incorporating quarter turn ceramic disc headworks controlling the flow with single lever operating member that incorporates a manual override button. Temperature is controlled independently via a thermostatic cartridge with a single lever operating member that incorporates a manual override button. Each inlet and hand shower outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Product is supplied with shower hose, handset and overhead shower. Maximum working pressure 10.0 Bar.
Non-metallic materials and components comply with BS6920 at 60°C
Range of wall mounted, thermostatic shower valves (chrome plated brass bodies), model (OP TS1503 SCL C) incorporates a single sequential headwork controlling both flow and temperature. Model (TS1503ECP-2000-MK) incorporates a thermostatic mixing cartridge that only controls the temperature. The inlets incorporate flow regulators, plastic strainers and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 65°C
Range of wall mounted, thermostatic shower valves, (chrome plated brass bodies), incorporating quarter turn ceramic disc headworks controlling the flow. The temperature is controlled independently via a thermostatic cartridge the temperature, both using single lever operating members. The inlets incorporate flow regulators, plastic strainers, screwdriver operated isolation valves and approved single check valve cartridges (however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection). Maximum working pressure 10.0 bar.
Non-metallic materials and components comply with BS6920 at 60°C
Page 20 of 32
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
