>B< Press range of stainless-steel SUS316L fittings for use with 316L stainless steel tube manufactured to EN10312. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2201312

Size:

Please refer to model.

Marking:

Conex logo (B) and size on body

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

PS4001G – Male Bend PS4001G0150400 – 15 x ½” PS4001G0180400 – 18 x ½” PS4001G0180600 – 18 x ¾” PS4001G0220600 – 22 x ¾” PS4001G0280800 – 28 x 1” PS4001G0351000 – 35 x 1-1/4” PS4001G0421200 – 42 x 1-1/2” PS4001G0541600 – 54 x 2” PS4002G – Female Bend PS4002G0150400 – 15 x ½” PS4002G0180400 – 18 x ½” PS4002G0180600 – 18 X ¾” PS4002G0220600 – 22 x ¾” PS4002G0280800 – 28 x 1” PS4002G0351000 – 35 x 1-1/4” PS4002G0421200 – 42 x 1-1/2” PS4002G0541600 – 54 x 2” PS4090G – Female Street Elbow PS4090G0150400 – 15 x ½” PS4090G0180400 – 18 x ½” PS4090G0220400 – 22 x ½” PS4090G0220600 – 22 x ¾” PS4090G0280800 – 28 x 1” PS4090G0351000 – 35 x 1-1/4” PS4092G – Male Elbow 90° PS4092G0150400 – 15 x ½” PS4092G0180400 – 18 x ½” PS4130G – Female Tee PS4130G0150415 – 15 x 15 x ½” PS4130G0180418 – 18 x 18 x ½” PS4130G0180618 – 18 x 18 x ¾” PS4130G0220422 – 22 x 22 x ½” PS4130G0220622 – 22 x 22 x ¾” PS4130G0280428 – 28 x 28 x ½” PS4130G0280628 – 28 x 28 x ¾” PS4130G0280828 – 28 x 28 x 1” PS4130G0350435 – 35 x 35 x ½” PS4130G0350635 – 35 x 35 x ¾” PS4130G0351035 – 35 x 35 x 1-1/4” PS4130G0420442 – 42 x 42 x ½” PS4130G0420642 – 42 x 42 x ¾” PS4130G0540454 – 54 x 54 x ½” PS4130G0540654 – 54 x 54 x ¾” PS4130G0541654 – 54 x 54 x 2” PS4130G0760676 – 76 x 76 x ¾” PS4130G0761676 – 76 x 76 x 2” PS4130G0890689 – 89 x 89 x ¾” PS4130G0891689 – 89 x 89 x 2” PS4130G10806108 – 108 x 108 x ¾” PS4130G10816108 – 108 x 108 x 2” PS4243G – Male Straight Connector PS4243G0150400 – 15 x ½” PS4243G0180400 – 18 x ½” PS4243G0180600 – 18 x ¾” PS4243G0220400 – 22 x ½” PS4243G0220600 – 22 x ¾” PS4243G0220800 – 22 x 1” PS4243G0280600 – 28 x ¾” PS4243G0280800 – 28 x 1” PS4243G0351000 – 35 x 1-1/4” PS4243G0421200 – 42 x 1-1/2” PS4243G0541600 – 54 x 2” PS4243G0762000 – 76 x 2-1/2” PS4243G0892400 – 89 x 3” PS4243G1083200 – 108 – 4” PS4270G – Female Straight Connector PS4270G0150400 – 15 x ½” PS4270G0180400 – 18 x ½” PS4270G0180600 – 18 x ¾” PS4270G0220400 – 22 x ½” PS4270G0220600 – 22 x ¾” PS4270G0220800 – 22 x 1” PS4270G0280600 – 28 x ¾” PS4270G0280800 – 28 x 1” PS4270G0351000 – 35 x 1-1/4” PS4270G0421200 – 42 x 1-1/2” PS4270G0541600 – 54 x 2” PS4270G0762000 – 76 x 2-1/2” PS4270G0892400 – 89 x 3” PS4275 – Slip Coupler PS4275 0150000 – 15MM PS4275 0180000 – 18MM PS4275 0220000 – 22MM PS4275 0280000 – 28MM PS4275 0350000 – 35MM PS4275 0420000 – 42MM PS4275 0540000 – 54MM PS4275 0760000 – 76MM PS4275 0890000 – 89MM PS4275 1080000 – 108MM PS4330G – Female Straight Adaptor PS4330G0150400 – 15 x ½” PS4330G0150600 – 15 x ¾” PS4330G0180400 – 18 x ½” PS4330G0180600 – 18 x ¾” PS4330G0220600 – 22 x ¾” PS4330G0220800 – 22 x 1” PS4330G0280800 – 28 x 1” PS4330G0351000 – 35 x 1-1/4” PS4330G0421200 – 42 x 1-1/2” PS4330G0541600 – 54 x 2” PS4331G – Male Straight Adaptor PS4331G0150400 – 15 x ½” PS4331G0180400 – 18 x ½” PS4331G0220600 – 22 x ¾” PS4331G0280800 – 28 x 1! PS4331G0351000 – 35 x 1-1/4” PS4331G0421200 – 42 x 1-1/2” PS4331G0541600 – 54 x 2” PS4355 – Flat Face Union PS4355 0150600 – 15 x ¾” PS4355 0180600 – 18 x ¾” PS4355 0220600 – 22 x ¾” PS4355 0220800 – 22 x 1” PS4355 0280800 – 28 x 1” PS4355 0281000 – 28 x 1-1/4” PS4355 0351200 – 35 x 1-1/2” PS4471G – Wallplate Elbow PS4471G0150400 – 15 x ½” PS4471G0180400 – 18 x ½” PS4471G0220600 – 22 x ¾” PS4471G0280800 – 28 x 1” PS5001 – Street Bend PS5001 0150000 – 15MM PS5001 0180000 – 18MM PS5001 0220000 – 22MM PS5001 0280000 – 28MM PS5001 0350000 – 35MM PS5001 0420000 – 42MM PS5001 0540000 – 54MM PS5001 0760000 – 76MM PS5001 0890000 – 89MM PS5002 – Bend PS5002 0150000 – 15MM PS5002 0180000 – 18MM PS5002 0220000 – 22MM PS5002 0280000 – 28MM PS5002 0350000 – 35MM PS5002 0420000 – 42MM PS5002 0540000 – 54MM PS5002 0760000 – 76MM PS5002 0890000 – 89MM PS5002 1080000 – 108MM PS5030 – 90 Street Bend PS5030 0150000 – 15MM PS5030 0180000 – 18MM PS5030 0220000 – 22MM PS5030 0280000 – 28MM PS5030 0350000 – 35MM PS5030 0420000 – 42MM PS5030 0540000 – 54MM PS5040 – 45 Street Bend PS5040 0150000 – 15MM PS5040 0180000 – 18MM PS5040 0220000 – 22MM PS5040 0280000 – 28MM PS5040 0350000 – 35MM PS5040 0420000 – 42MM PS5040 0540000 – 54MM PS5040 0760000 – 76MM PS5040 0890000 – 89MM PS5040 1080000 – 108MM PS5041 – Obtuse Bend PS5041 0150000 – 15MM PS5041 0180000 – 18MM PS5041 0220000 – 22MM PS5041 0280000 – 28MM PS5041 0350000 – 35MM PS5041 0420000 – 42MM PS5041 0540000 – 54MM PS5041 0760000 – 76MM PS5041 0890000 – 89MM PS5041 1080000 – 108MM PS5087 – Cross Short PS5087 0150000 – 15MM PS5087 0180000 – 18MM PS5087 0220000 – 22MM PS5087 0280000 – 28MM PS5130 – Equal Tee PS5130 0151515 – 15MM PS5130 0181818 – 18MM PS5130 0222222 – 22MM PS5130 0282828 – 28MM PS5130 0353535 – 35MM PS5130 0424242 – 42MM PS5130 0545454 – 54MM PS5130 0767676 – 76MM PS5130 0898989 – 89MM PS5130 10800EQ – 108MM PS5130 – Reduced Branch Tee PS5130 0181518 – 18 x 15 x 18 PS5130 0221522 – 22 x 15 x 22 PS5130 0221822 – 22 x 18 x 22 PS5130 0281528 – 28 x 15 x 28 PS5130 0281828 – 28 x 18 x 28 PS5130 0282228 – 28 x 22 x 28 PS5130 0351535 – 35 x 15 x 35 PS5130 0351835 – 35 x 18 x 35 PS5130 0352235 – 35 x 22 x 35 PS5130 0352835 – 35 x 28 x 35 PS5130 0422242 – 42 x 22 x 42 PS5130 0422842 – 42 x 28 x 42 PS5130 0423542 – 42 x 35 x 42 PS5130 0542254 – 54 x 22 x 54 PS5130 0542854 – 54 x 28 x 54 PS5130 0543554 – 54 x 35 x 54 PS5130 0544254 – 54 x 42 x 54 PS5130 0762276 – 76 x 22 x 76 PS5130 0762876 – 76 x 28 x 76 PS5130 0763576 – 76 x 35 x 76 PS5130 0764276 – 76 x 42 x 76 PS5130 0765476 – 76 x 54 x 76 PS5130 0892289 – 89 x 22 x 89 PS5130 0892889 – 89 x 28 x 89 PS5130 0893589 – 89 x 35 x 89 PS5130 0894289 – 89 x 42 x 89 PS5130 0895489 – 89 x 54 x 89 PS5130 0897689 – 89 x 76 x 89 PS5130 10822108 – 108 x 22 x 108 PS5130 10828108 – 108 x 28 x 108 PS5130 10835108 – 108 x 35 x 108 PS5130 10842108 – 108 x 42 x 108 PS5130 10854108 – 108 x 54 x 108 PS5130 10876108 – 108 x 76 x 108 PS5130 10889108 – 108 x 89 x 108 PS5230D – Flange Adapter PS5230D0760000 – 76MM PS5230D0890000 – 89MM PS5230D1080000 – 108MM PS5243 – Fitting Reducer PS5243 0181500 – 18 x 15 PS5243 0221500 – 22 x 15 PS5243 0221800 – 22 x 18 PS5243 0281500 – 28 x 15 PS5243 0281800 – 28 x 18 PS5243 0282200 – 28 x 22 PS5243 0351800 – 35 x 18 PS5243 0352200 – 35 x 22 PS5243 0352800 – 35 x 28 PS5243 0422800 – 42 x 28 PS5243 0423500 – 42 x 35 PS5243 0542800 – 54 x 28 PS5243 0543500 – 54 x 35 PS5243 0544200 – 54 x 42 PS5243 0764200 – 76 x 42 PS5243 0765400 – 76 x 54 PS5243 0894200 – 89 x 42 PS5243 0895400 – 89 x 54 PS5243 0897600 – 89 x 76 PS5243 1085400 – 108 x 54 PS5243 1087600 – 108 x 76 PS5243 1088900 – 108 x 89 PS5270 – Coupler PS5270 0150000 – 15MM PS5270 0180000 – 18MM PS5270 0220000 – 22MM PS5270 0280000 – 28MM PS5270 0350000 – 35MM PS5270 0420000 – 42MM PS5270 0540000 – 54MM PS5270 0760000 – 76MM PS5270 0890000 – 89MM PS5270 1080000 – 108MM PS5301 – Stop End PS5301 0150000 – 15MM PS5301 0180000 – 18MM PS5301 0220000 – 22MM PS5301 0280000 – 28MM PS5301 0350000 – 35MM PS5301 0420000 – 42MM PS5301 0540000 – 54MM PS5301 0760000 – 76MM PS5301 0890000 – 89MM PS5301 1080000 – 108MM

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

ZK International Group

Company Name

ZK International Group

Address

NO.678 Dingxiang Road, Binhai Garden,Economic and Technological Development Zone, Wenzhou, Zhejiang

Country

China

General Email

View All Listings by this Company

Center Brand range of brass and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2202702

Marking:

CB (brand of Wolseley) and size on body

Installation Requirements:

R001

Expiry date:

28/02/2027

Model:

Center Brand range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Dual flush WC outlet valve with an ABS body, incorporating a silicone seal and internal overflow. The valve is operated via a push button assembly for either full or reduced flush. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2203327

Size:

2” BSP (M)

Marking:

WRAS, ING, B421, & CE on body.

Installation Requirements:

R001 R571 R581 R582

Expiry date:

31/03/2027

Model:

B421

Approval Holder:

Xiamen Ing Sanitary Fittings Ltd.

Company Name

Xiamen Ing Sanitary Fittings Ltd.

Address

2/F, (2#, Factory B), No. 503West Jinyuan 2nd Road Jimei District Xiamen

Country

China

Phone

0086 0592 5669770 803

General Email

sales2@ing-sanitary.com

View All Listings by this Company

Manufacturer:

Xiamen Ing Sanitary Fittings Ltd.

Company Name

Xiamen Ing Sanitary Fittings Ltd.

Address

2/F, (2#, Factory B), No. 503West Jinyuan 2nd Road Jimei District Xiamen

Country

China

Phone

0086 0592 5669770 803

General Email

sales2@ing-sanitary.com

View All Listings by this Company

Electric instantaneous, vented mains water heater with plastic a housing and silicon rubber hose. Maximum operating temperature 98°C.

Section:

1365 Heaters

Section Subtitle:

Electric instantaneous, open outlet, mains fed.

WRAS Approval Number:

2203344

Note:

Open outlet use only.

Size:

½”BSP(M)

Marking:

Ellsi logo, model and product information on body.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

PDT-000215

Approval Holder:

Ellsi Limited

Company Name

Ellsi Limited

Postcode

DN15 8SL

Country

United Kingdom

General Email

martin@ellsi.co.uk

View All Listings by this Company

Range of water meter manifolds with gun metal bodies and ball valve with either a quarter turn stop valve or screw down stop valve. The products incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

WRAS Approval Number:

2203314

Note:

R008 applies to te plastic cap

Size:

see model

Marking:

Ebco logo, flow arrow, Foundry I.D. (QL) & date of manufacturer (MM/YY) on body.

Installation Requirements:

R001 R008

Expiry date:

31/03/2027

Model:

1" BSP (M) x ¾” BSP (F) models: MB1030403BM MB1030403EM MANI0461V MANI0461VW MANI0461VMCP20 MVB0250MCP40 MVB0240 MVB0241 MVB0250 MVB0255 ¾ BSP (F) x ¾” BSP (F) models: MBB0460V MBB0470V MBB0461V MBB0481V MBB0040V MBB0060V MVB0210 MVB0200 MVB0220 ¾” BSP (M) x ¾” BSP (M) models: MVB0020 MVB0030 MVB0040 MVB0045 1" BSP (M) x 1” BSP (M) MVB0230

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of concealed thermostatic mixing valves with DZR brass bodies incorporating a thermostatic cartridge controlling the temperature. The inlets incorporate asingle check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2203306

Note:

Shower hose and shower handset are not part of this approval

Size:

¾” BSP (F)

Marking:

FM Mattsson, DR and model number on body.

Installation Requirements:

R001 R010 R040

Expiry date:

31/03/2027

Model:

51939120 51939121 51939122 51939123 51909008

Approval Holder:

FM Mattsson Mora Group AB

Company Name

FM Mattsson Mora Group AB

Address

View All Listings by this Company

Manufacturer:

FM Mattsson Mora Group AB

Company Name

FM Mattsson Mora Group AB

Address

View All Listings by this Company

Range of spout outlets with brass bodies (various finishes) incorporating an aerator. Product is supplied with either a lever type pop up (HIRONDELLE models) or click type waste (ICON-X & CORVAIR models). Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2203307

Note:

No testing has been performed on the pop-up wastes

Size:

1 ¼” BSP (M) connector

Marking:

THG on spout

Installation Requirements:

R001 R006 R010

Expiry date:

31/03/2027

Model:

xxx.xxx.170/W – Rim mounted basin spout mixer with waste. First xxx: style . Second xxx: finish Styles HIRONDELLE: A4J Hirondelle cristal clair – A4K Hirondelle cristal clair décor platine - A4L Hirondelle cristal clair décor or ICON-X: U7G Icon-X / U7H Icon-X à manettes / U7J Icon-X, insert metal / U7K Icon-X à manettes, insert metal / U7L Icon-X, Titane / U7M Icon-X à manettes, Titane / U7N Icon-X, pierre à définir – U7P Icon-X à manettes, pierre à définir/ U7S - Icon-X , Carbone or / U7T Icon-X à manettes, Carbone or – CORVAIR: U8D Corvair / U8E Corvair à manettes / U8F Corvair marbre Howlite / U8G Corvair à manettes marbre Howlite / U8H Corvair marbre Portoro / U8J Corvair à manettes marbre Portoro / U8K Corvair marbre Fior di Bosco / U8L Corvair à manettes marbre Fior di Bosco / U8M Corvair pierre à définir / U8N Corvair à manettes pierre à définir Finish A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of brass (chrome plated) quick fit connectors. Maximum operating temperature 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2204046

Note:

Open outlet use only

Size:

See models

Marking:

Delabie on body.

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

820122N: M22 (F) 820123: ½” BSP (M) 820124N: M24 (M) 820125: M24 (M) 820126N: M16 (M) 821122: M22 (F) 821123: ½” BSP (M) 821124: M24 (M) 821125: M24 (M)

Approval Holder:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Manufacturer:

Delabie UK Ltd.

Company Name

Delabie UK Ltd.

Address

18,rue du Maréchal Foch Friville Escarbotin

Postcode

80210

Country

France

General Email

sebastien.spriet@delabie.fr

View All Listings by this Company

Range of shower outlets incorporating brass bodies (various finishes) and NBR ‘O’-rings. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2205705

Note:

Open outlet use only

Size:

⅜”, ½” and ¾” BSP (F) (all models)

Marking:

COMPANY LOGO ON CONNECTOR

Installation Requirements:

R001 R040

Expiry date:

31/05/2027

Model:

LB2110 CLASSIC 5" ROSE, LB2111 CLASSIC 6" ROSE, LB2107 CLASSIC 8" ROSE, LB1731 CLASSIC 12" ROSE, MK2108 MACKINTOSH 6" ROSE, MK2107 MACKINTOSH 8" ROSE, MK1730 MACKINTOSH 12" ROSE, LBN2110 EASY CLEAN CLASSIC 6" ROSE, LBN2107 EASY CLEAN CLASSIC 8" ROSE, LBN1731 EASY CLEAN 12" ROSE, MKN2108 EASY CLEAN MACKINTOSH 6" ROSE, MKN2107 EASY CLEAN MACKINTOSH 8" ROSE & MKN1730 EASY CLEAN MACKINTOSH 12" ROSE SHOWER OUTLETS

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of shower handsets with plastic bodies incorporating an integral filters. The inlet incorporates a combined washer and a strainer, plastic flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2204320

Note:

Open outlet use only. This product has not been tested or approved for claims made by the approval holder to prevent micro-organisms and maintain sterile properties for specific lifespan.

Size:

½” BSP (M)

Marking:

T Safe logo on face, technical info on handle

Installation Requirements:

R001 R040

Expiry date:

30/04/2027

Model:

02-803310 31 days Medical shower Filter 02-803310CE 31 days Medical shower Filter 02-803320 62 days Medical shower Filter 02-803320CE 62 days Medical shower Filter 02-803311 31 days Medical shower Filter, Sterile 02-803321 62 days Medical shower Filter, Sterile Models added October 2023 02-803330 Medical Shower Filter 92 Day G2 02-803331 Medical Shower Filter 92 Day G2 SP

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company