Directory Search Results

Print List

#2110321

Range of M type press fittings with TP2 copper bodies and EPDM ‘O’-rings, for use with TP2 copper pipe to EN1057. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2110321
Size:
See model.
Marking:
Hailiang and size on body.
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
EKYH0000, STRAIGHT COUPLING WITH GROOVE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0002, SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0003, REDUCING COUPLING CXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0004, FITTING REDUCER FXC: 22mm*15mm 28mm*15mm 28mm*22mm 35mm*15mm 35mm*22mm 35mm*28mm 42mm*15mm 42mm*22mm 42mm*28mm 42mm*35mm 54mm*15mm 54mm*22mm 54mm*28mm 54mm*35mm 54mm*42mm EKYH0005, COPPER FEMALE ADAPTOR: S15*1/2FC‐G S22*3/4FC‐G S28*1FC‐G S35*1 1/4FC‐G S42*1 1/2FC‐G S54*2FC‐G Note: FC‐G is female BSPP EKYH0006, COPPER MALE ADAPTOR: S15*1/2MC‐ZG S15*3/4MC‐ZG S22*3/4MC‐ZG S22*1MC‐ZG S28*1MC‐ZG S35*1 1/4MC‐ZG S42*1 1/2MC‐ZG S54*2MC‐ZG Note: MC‐ZG is male BSPT EKYH0012, EXTENDED SLIP COUPLING CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0100, 90DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0101, 90DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0104, REDUCER ELBOW: 22mm*15mm 28mm*15mm 28mm*22mm EKYH0130, 45DEG ELBOW CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0131, 45DEG STREET ELBOW FTGXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0166, CROSSOVER CXC:15mm, 22mm, 28mm EKYH0167, PART CROSSOVER FTGXC: 15mm, 22mm, 28mm EKYH0201, EQUAL TEE CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm EKYH0202, REDUCING TEE: 22mm*22mm*15mm 28mm*28mm*15mm 28mm*22mm*15mm 35mm*35mm*15mm 35mm*35mm*22mm 35mm*35mm*28mm 42mm*42mm*15mm 42mm*42mm*22mm 42mm*42mm*28mm 42mm*42mm*35mm 54mm*54mm*15mm 54mm*54mm*22mm 54mm*54mm*28mm 54mm*54mm*35mm 54mm*54mm*42mm 22mm*15mm*15mm 22mm*15mm*22mm 28mm*15mm*15mm 28mm*15mm*22mm 28mm*15mm*28mm 28mm*22mm*15mm 28mm*22mm*22mm 28mm*22mm*28mm 15mm*15mm*22mm 22mm*22mm*28mm EKYH0301, CAP CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm Models added September 2023: EKYH0001 STRAIGHT COUPLING WITH DOT CXC: 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. EKYH0202 REDUCING TEE: 35mm*22mm*22mm, 35mm*22mm*35mm, 35mm*28mm*35mm, 35mm*28mm*22mm, 35mm*28mm*35mm, 42mm*35mm*35mm. EKYH0005 COPPER FEMALE ADAPTOR: 15mm*3/4", 22mm*1/2", 22mm*1", 28mm*3/4", 35mm*1". EKYH0006 COPPER MALE ADAPTOR: 22mm*1/2", 28mm*3/4", 35mm*1". Models added in July 2024: EKYH0001 STRAIGHT COUPLING WITH DOT CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0002 SLIP COUPLING CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0012 EXTENDED SLIP COUPLING CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0003 REDUCING COUPLING CXC 66.7mmX22mm 66.7mmX28mm 66.7mmX35mm 66.7mmX42mm 66.7mmX54mm 76.1mmX28mm 76.1mmX35mm 76.1mmX42mm 76.1mmX54mm 76.1mmX66.7mm 88.9mmX42mm 88.9mmX54mm 88.9mmX66.7mm 88.9mmX76.1mm 108mmX28mm 108mmX35mm 108mmX42mm 108mmX54mm 108mmX66.7mm 108mmX76.1mm 108mmX88.9mm EKYH0004 FITTING REDUCER FXC 66.7mmX28mm 66.7mmX35mm 66.7mmX42mm 66.7mmX54mm 76.1mmX28mm 76.1mmX35mm 76.1mmX42mm 76.1mmX54mm 76.1mmX66.7mm 88.9mmX42mm 88.9mmX54mm 88.9mmX66.7mm 88.9mmX76.1mm 108mmX28mm 108mmX35mm 108mmX42mm 108mmX54mm 108mmX66.7mm 108mmX76.1mm 108mmX88.9mm EKYH0100 90DEG ELBOW CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0101 90DEG STREET ELBOW FTGXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0130 45DEG ELBOW CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0131 45DEG STREET ELBOW FTGXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0301 CAP CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0201 EQUAL TEE CXC 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0202 REDUCING TEE 66.7mmX66.7mmX22mm 66.7mmX66.7mmX28mm 66.7mmX66.7mmX35mm 66.7mmX66.7mmX42mm 66.7mmX66.7mmX54mm 76.1mmX76.1mmX22mm 76.1mmX76.1mmX28mm 76.1mmX76.1mmX35mm 76.1mmX76.1mmX42mm 76.1mmX76.1mmX54mm 76.1mmX76.1mmX66.7mm 88.9mmX88.9mmX22mm 88.9mmX88.9mmX28mm 88.9mmX88.9mmX35mm 88.9mmX88.9mmX42mm 88.9mmX88.9mmX54mm 88.9mmX88.9mmX66.7mm 88.9mmX88.9mmX76.1mm 108mmX108mmX22mm 108mmX108mmX28mm 108mmX108mmX35mm 108mmX108mmX42mm 108mmX108mmX54mm 108mmX108mmX66.7mm 108mmX108mmX76.1mm 108mmX108mmX88.9mm EKYH0005 COPPER FEMALE ADAPTOR 66.7mmX2 1/2" BSPP 76.1mmX2 1/2" BSPP 76.1mmX3" BSPP 88.9mmX3" BSPP 108mmX4" BSPP EKYH0006 COPPER MALE ADAPTOR 66.7mmX2 1/2" BSPT 76.1mmX2 1/2" BSPT 76.1mmX3" BSPT 88.9mmX3" BSPT 108mmX4" BSPT EKYH0501 FLANGE 28mm, 35mm, 42mm, 54mm, 66.7mm, 76.1mm, 88.9mm, 108mm EKYH0705 STRAIGHT CYLINDER UNION 15mm*G 1/2 15mm*G 3/4 22mm*G 3/4 22mm*G 1 28mm*G 1 EKYH0704 BENT CYLINDER UNION 15mm*G 1/2 15mm*G 3/4 22mm*G 3/4 22mm*G 1 28mm*G 1 EKYH0703 STRAIGHT TAP CONNECTOR 15mm*G 1/2 15mm*G 3/4 22mm*G ¾ EKYH0702 BENT TAP CONNECTOR 15mm*G 1/2 15mm*G 3/4 22mm*G ¾ EKYH0000 STRAIGHT COUPLING WITH GROOVE CXC 66.7mm, 76.1mm, 88.9mm, 108mm

Approval Holder:
Zhejiang Hailiang Co., Ltd
Company Name
Zhejiang Hailiang Co., Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
Zhejiang Hailiang Co., Ltd
Company Name
Zhejiang Hailiang Co., Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2106049

VSH XPRESS Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2106049
Size:
12mm - 108mm.
Marking:
DVGW, XPRESS & SIZE ON BODY
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
7001 22, 7002 22, 7001 15, 7002 15, 7040 22, 7130 15 & 7130 22 PRESS FITTINGS 6270 Copper Press Coupling: 12 - 108mm. 6271 Copper Press Coupling: 12 - 54mm. 6240 Reducer press x press: 15mmx12mm - 54mmx42mm. 6243 Reducer x press: 15mmx12mm - 108mm x 88.9mm. 6001 Bend 90° x press: 12-108mm. 6002 Bend 90° press x press: 12 - 108mm. 6130 Equal Tee 3 x press: 12 - 108mm. 6040 Bend 45° x press: 12 - 108mm. 6041 Bend 45° press x press: 12 - 108mm. 6301 Endcap press: 12 - 108mm. 6131 Reducing Tee 3 x press: 15mmx15mmx12mm - 108mm x 76.1mm x 108mm. 6085 Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 Flange PN16: 76.1mm.

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2111346

Range of under-sink, electrically heated vented water heaters (cased and insulated). Maximum operating temperature 98˚C

Section:
1390 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, open outlet.
WRAS Approval Number:
2111346
Size:
3/8” BSP
Marking:
LISHUI, model and other tech info on adhesive label on body
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
2.4L,1500KW: LS5001351-11, LS5001351-12, LS5001351-21, LS5001351-22, LS5001352-11, LS5001352-12, LS5001352-21, LS5001352-22, LS5001353-11, LS5001353-12, LS5001353-21, LS5001353-22, LS5001354-12, LS5001354-32, LS5001354-22, LS5001354-42, LS5001355-11, LS5001355-12, LS5001355-21, LS5001355-22, LS5001357-11, LS5001357-12, LS5001357-21, LS5001357-22, LS5001358, LS5001361, LS5001362, LS5001363, LS5001364, LS5001365, LS5001366, LS5001367, LS5001368. 4L,2300KW: LS5001371, LS5001374, LS5001372-01, LS5001372-02, LS5001372-03, LS5001372-04, LS5001376-01, LS5001376-02, LS5001376-03, LS5001377-01, LS5001377-02, LS5001377-03, LS5001377-04, LS5001373, LS5001375.

Approval Holder:
Xiamen Lishui Technology Co., Ltd.
Company Name
Xiamen Lishui Technology Co., Ltd.
Address
No. 1616, Guankou Road Jimei District Xiamen Fujian
Country
China
Phone
86 159 059 34 310
General Email
wolf@sinowiess.com

View All Listings by this Company
Manufacturer:
Xiamen Lilin Technology Co., Ltd.
Company Name
Xiamen Lilin Technology Co., Ltd.
Address
Unit 201 Building 5Haiyi Industrial Park No. 7, Kengping Road Xiamen Fujian
Country
China
General Email

View All Listings by this Company

Print This Approval


#2110331

Range of air cooled ice making machines . Inlet is controlled via solenoid valve. Maximum working pressure 5.5 bar. Cold water use only.

Section:
1500 Ice Making Machine(s)
Size:
See model.
Marking:
Manitowoc logo on door. Manitowoc, model, serial number & technical information on body.
Installation Requirements:
R001 R009 R160 R171 R511
Expiry date:
31/10/2026
Model:
I(*)T0300A I(*)T0300W I(*)P0320A I(*)T0420A I(*)T0450A I(*)T0450W I(*)T0500A I(*)P0500A I(*)T0620A I(*)T0620W I(*)T0750A I(*)T0750W I(*)T0900A I(*)T0900W I(*)T1200A I(*)T1200W I(*)T1200N IBT1020C I(*)T1500A I(*)T1500W I(*)T1500N I(*)T1900A I(*)T1900N I indicates Indigo family of Ice Machines (*) Indicates D, Y or R. Dependent on ice cube size (T or P) Indicates refrigerant type (T=R410A, P=R290) 4 numerical characters indicate to icemaking capacity per 24hrs Final character indicates cooling option (A=Air, W=Water, N=Remote Condenser, C=Remote Condensing Unit)
Models added July 2024: I(*)P0300A I(*)P0420A I(*)P0620A I(*)P0620W I(*)P0600A I(*)P0600W I(*)P0900A I(*)P0900W I(*)P1200A I(*)P1200W I(*)P1200N I(*)P1500A I(*)P1500W I(*)P1500N I(*)P1900A I(*)P1900N

Approval Holder:
Pentair Commercial Ice LLC
Company Name
Pentair Commercial Ice LLC
Address
5500 Wayzata Blvd. Suite 900 Golden Valley, MN
Postcode
55416
Country
United States
General Email
jeng.yang@pentair.com

View All Listings by this Company
Manufacturer:
Pentair Commercial Ice LLC
Company Name
Pentair Commercial Ice LLC
Address
5500 Wayzata Blvd. Suite 900 Golden Valley, MN
Postcode
55416
Country
United States
General Email
jeng.yang@pentair.com

View All Listings by this Company

Print This Approval


#2112340

Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Size:
see model
Marking:
Company website (Deltaflowtech.com), WRAS approved and other technical information on dial.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
D50W – DN50 D65W – DN65 D80W – DN80 D100W – DN100 D125W – DN125 D150W – DN150 D200W – DN200

Approval Holder:
Detla Flowtech Ltd.
Company Name
Detla Flowtech Ltd.
Address
Unit 7 Bruff Ind Est Longley Green Suckly
Postcode
WR6 5DR

View All Listings by this Company
Manufacturer:
Detla Flowtech Ltd.
Company Name
Detla Flowtech Ltd.
Address
Unit 7 Bruff Ind Est Longley Green Suckly
Postcode
WR6 5DR

View All Listings by this Company

Print This Approval


#2111325

Range of water meter manifolds (also known as double box valves) for use with MDPE pipe (manufactured to BS EN 12201). The products incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 16 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
25mm & 32mm push-fit
Marking:
Talis, Talis logo & flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
‘Talbot Double Box Valves’: MB57425U Matrix Double Box Inlet 2 x 25mm PF, Outlet 2 x 25mm PF. MB5743225U Matrix Double Box Inlet x 32mm PF Tee, Outlet 2 x 25mm PF. MB5743232U Matrix Double Box inlet 1 x 32mm PF Tee, Outlet 2 x 32mm PF. MB57432U matrix Double Box Inlet 2 x 32mm PF, Outlet 2 x 32mm PF.

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#2110339

Range of meter boxes incorporating a plastic manifold arrangement consisting of a stop valve with non-rising spindle , check valve (however the complete assembly has not been tested to demonstrate it provides adequate backflow) and concentric meter port. Some models incorporate a drain off or blacking plug. Connections can be compression or push fit (see model). For use with PE8-0 pipe to BS EN 12201 and copper to EN 1057. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1525 Meter Chambers - Wall Mounted
Size:
see model
Marking:
Talis logo, Talbot, flow arrow, pressure, inlet & outlet on body.
Installation Requirements:
R001 R430
Expiry date:
31/10/2026
Model:
Drain off model: WA3261515AM – 15mm x 15mm WA3261522AM – 15mm x 22mm WA3262215AM – 22mm x 15mm WA3262222AM – 22mm x 22mm WA3262515AM – 25mm p/f x 15mm WA3262522AM – 25mm p/f x 15mm Blanking plug model: WA3271515BM – 15mm x 15mm WA3271522BM – 15mm x 22mm WA3272215BM - 22mm x 15mm WA3272222BM – 22mm x 22mm WA3272515BM – 25mm p/f x 15mm WA3272522BM – 25mm p/f x 22mm

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#2112058

Range of in line regulating valves DZR brass bodies, EPDM ‘O’-rings and PTFE seals. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:
1530 Miscellaneous Fittings
Size:
½” – 2” BSP F.
Marking:
Pegler on operating member. Pegler logo, CR, PN, size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
½” 1260MF – item code 126043. ½” 1260LF – item code 126022 ½” 1260ULF – item code 126039 ½” 1260SF – item code 126023 ¾” 1260SF – item code 126024 1” 1260SF – item code 126025 1¼” 1260SF – item code 126026 1½” 1260SF – item code 126027 2” 1260SF – item code 126028 MF = Medium Flow LF = Low Flow ULF = Ultra Low Flow SF = Standard Flow

Approval Holder:
Pegler Yorkshire Ltd
Company Name
Pegler Yorkshire Ltd
Address
St Catherines Avenue, Balby Doncaster South Yorkshire
Postcode
DN4 8DF
Phone
+44 (0) 844 243 4400

View All Listings by this Company

Print This Approval


#2110035

Chrome plated brass quick connector with EPDM washer. Maximum operating temperature 60°C.

Section:
1535 Miscellaneous
Section Subtitle:
Tap accessories.
WRAS Approval Number:
2110035
Note:
Open outlet use only.
Size:
See model
Marking:
AQUATOOLS on body
Installation Requirements:
R001 R040
Expiry date:
31/10/2026
Model:
AT820120: ½” BSP (F) x 11mm quick connector. AT820122: 22mm (F) x 11mm quick connector. AT820123: ½" BSP (M) x 11mm quick connector. AT820124: M24x1 x 11mm quick connector. AT820125: M24x1.25 x 11mm quick connector. AT820126: M16.5x1 x 11mm quick connector.

Approval Holder:
Aqua-tools
Company Name
Aqua-tools
Address
26 rue Charles Edouard Jeanneret 78300 Poissy France
Phone
+33139750220
General Email
contacts@aqua-tools.com

View All Listings by this Company
Manufacturer:
Delabie UK Ltd.
Company Name
Delabie UK Ltd.
Address
18,rue du Maréchal Foch Friville Escarbotin
Postcode
80210
Country
France
General Email
sebastien.spriet@delabie.fr

View All Listings by this Company

Print This Approval


#2110329

‘Para Z’ range of circulating pumps with either stainless steel, bronze or plastic bodies. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2110329
Size:
¾”, 1”, 1¼” & 1½” BSP (M)
Marking:
Wilo, model and other technical information on pump face. Flow arrow on body,
Installation Requirements:
R001
Expiry date:
31/10/2026
Model:
‘Para Z’ range comprising of models: KU 12/4-20. KU 12/6-43. KU 12/7-50. KU 12/8-75. KU 15-/4-20. KU 15/6-43. KU 15/7-50. KU 15/8-75. BZ 25/4-20. BZ 25/6-43. BZ 25/7-50. BZ 25/8-75. BZ 15/4-20. BZ 15/6-43. BZ 15/7-50. BZ 15/8-75. N 20/4-20. N 20/6-43. N 20/7-50. N 20/8-75. N 25/4-20. N 25/6-43. N 25/7-50. N 25/8-75.

Approval Holder:
WILO INTEC
Company Name
WILO INTEC
Address
50 Avenue Eugene Casella, Aubigny sur nere
Postcode
18700
Country
France
Phone
+332 48 81 62 62
General Email
franck.guillaume@wilo.com

View All Listings by this Company
Manufacturer:
WILO INTEC
Company Name
WILO INTEC
Address
50 Avenue Eugene Casella, Aubigny sur nere
Postcode
18700
Country
France
Phone
+332 48 81 62 62
General Email
franck.guillaume@wilo.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 18 of 247

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.