Ranges of brass & chromium plated brass, nickel plated brass compression fittings for use with copper pipe to BS EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211359

Size:

See models.

Marking:

CPS, Size, EN1542-2, UK or UK Made & UK on compression nut.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

182318 STRAIGHT COUPLING 317638 CHROME SWIVEL STRAIGHT TAP CONNECTOR 427218 STRAIGHT REDUCING COUPLING 537297 FEMALE COUPLING 538902 MALE COUPLING 538903 FEMALE COUPLING 538908 STOP END 754332 MALE COUPLING 755960 EQUAL ELBOW 797600 CHROME STRAIGHT COUPLING 797601 CHROME STRAIGHT COUPLING 797602 CHROME STRAIGHT COUPLING 797603 CHROME MALE COUPLING 797606 CHROME FEMALE COUPLING 797610 CHROME EQUAL ELBOW 797611 CHROME EQUAL ELBOW 797612 CHROME MALE ELBOW 797613 CHROME FEMALE ELBOW 797614 CHROME EQUAL TEE 797615 CHROME EQUAL TEE 799319 CHROME WALL PLATE ELBOW 801711 CHROME EQUAL ELBOW 870222 CHROME MALE ELBOW 870225 CHROME FEMALE ELBOW 874322 CHROME STOP END 875078 CHROME THREE PIECE REDUCING SET 875082 CHROME STOP END 875087 CHROME REDUCED END TEE 875088 CHROME REDUCED BRANCH & END TEE 950146 STRAIGHT COUPLING 950150 STRAIGHT REDUCING COUPLING 950152 STRAIGHT REDUCING COUPLING 950159 MALE COUPLING 950164 MALE COUPLING 950169 MALE COUPLING 950187 FEMALE COUPLING 950191 FEMALE COUPLING 950205 TANK CONNECTOR 950211 STOP END 950220 EQUAL ELBOW 950247 MALE ELBOW 950251 MALE ELBOW 950269 FEMALE ELBOW 950270 FEMALE ELBOW 950271 FEMALE ELBOW 950274 FEMALE ELBOW 950275 SWIVEL BENT TAP CONNECTOR 950278 WALL PLATE ELBOW 950286 EQUAL TEE 950290 REDUCED BRANCH & END TEE 950291 REDUCED END TEE 950293 REDUCED BRANCH TEE 950301 REDUCED BRANCH TEE 950326 REDUCED FEMALE BRANCH TEE 950327 REDUCED FEMALE BRANCH TEE 953075 STRAIGHT REDUCING COUPLING 953171 STRAIGHT REDUCING COUPLING 954298 STRAIGHT COUPLING 954300 STRAIGHT COUPLING 954301 STRAIGHT COUPLING 954314 MALE COUPLING 954317 MALE COUPLING 954320 MALE COUPLING 954321 MALE COUPLING 954337 FEMALE COUPLING 954340 FEMALE COUPLING 954341 FEMALE COUPLING 954344 SWIVEL STRAIGHT TAP CONNECTOR 954346 SWIVEL STRAIGHT TAP CONNECTOR 954347 TANK CONNECTOR 954348 TANK CONNECTOR 954351 STOP END 954352 STOP END 954353 STOP END 954355 EQUAL ELBOW 954356 EQUAL ELBOW 954357 EQUAL ELBOW 954367 MALE ELBOW 954370 MALE ELBOW 954394 EQUAL TEE 954395 EQUAL TEE 954396 EQUAL TEE 954397 EQUAL TEE P701CP.09 28mm EQUAL TEE CHROME P702CP.16 22 x 22 x 15mm TEE CHROME

Approval Holder:

The Highbourne Group, City Plumbing Supplies

Company Name

The Highbourne Group, City Plumbing Supplies

Address

Branch Support Centre Highbourne House Highbourne House Crick Northampton

Postcode

NN6 7SL

Country

United Kingdom

Phone

07342 078865

General Email

Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Range of press-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with SS316L pipes. Maximum working pressure 16 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2303335

Size:

see model

Marking:

YS, size on body

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

STRAIGHT COUPLING SM3270 316L001515 – 15 mm SM3270 316L001818 – 18mm SM3270 316L002222 – 22mm SM3270 316L002828 – 28mm SM3270 316L003535 – 35mm SM3270 316L004242 – 42mm SM3270 316L005454 – 54mm SM3270 316L006666 – 66.7mm SM3270 316L007676 – 76.1mm SM3270 316L008888 – 88.9mm SM3270 316L00X8X8 – 108mm SLIP COUPLING SM3274 316L001515 – 15mm SM3274 316L001818 – 18mm SM3274 316L002222 – 22mm SM3274 316L002828 – 28mm SM3274 316L003535 – 35mm SM3274 316L004242 – 42mm SM3274 316L005454 – 54mm SM3274 316L006666 – 66.7mm SM3274 316L007676 – 76.1mm SM3274 316L008888 – 88.9mm SM3274 316L00X8X8 – 108mm 90 DEGREE EQUAL ELBOW SM3090 316L001515 – 15mm SM3090 316L001818 – 18mm SM3090 316L002222 – 22mm SM3090 316L002828 – 28mm SM3090 316L003535 – 35mm SM3090 316L004242 – 42mm SM3090 316L005454 – 54mm SM3090 316L006666 – 66.7mm SM3090 316L007676 – 76.1mm SM3090 316L008888 – 88.9mm SM3090 316L00X8X8 – 108mm 90 DEGREE STREET ELBOW SM3092 316L001515 – 15mm SM3092 316L001818 – 18mm SM3092 316L002222 – 22mm SM3092 316L002828 – 28mm SM3092 316L003535 – 35mm SM3092 316L004242 – 42mm SM3092 316L005454 – 54mm SM3092 316L006666 – 66.7mm SM3092 316L007676 – 76.1mm SM3092 316L008888 – 88.9mm SM3092 316L00X8X8 – 108mm 45 DEGREE EQUAL ELBOW SM3041 316L001515 – 15mm SM3041 316L001818 – 18mm SM3041 316L002222 – 22mm SM3041 316L002828 – 28mm SM3041 316L003535 – 35mm SM3041 316L004242 – 42mm SM3041 316L005454 – 54mm SM3041 316L006666 – 66.7mm SM3041 316L007676 – 76.1mm SM3041 316L008888 – 88.9mm SM3041 316L00X8X8 – 108mm 45 DEGREE STREET ELBOW SM3040 316L001515 – 15mm SM3040 316L001818 – 18mm SM3040 316L002222 – 22mm SM3040 316L002828 – 28mm SM3040 316L003535 – 35mm SM3040 316L004242 – 42mm SM3040 316L005454 – 54mm SM3040 316L006666 – 66.7mm SM3040 316L007676 – 76.1mm SM3040 316L008888 – 88.9mm SM3040 316L00X8X8 – 108mm EQUAL TEE SM3130 316L151515 – 15mm SM3130 316L181818 – 18mm SM3130 316L222222 – 22mm SM3130 316L282828 – 28mm SM3130 316L353535 – 35mm SM3130 316L424242 – 42mm SM3130 316L545454 – 54mm SM3130 316L666666 – 66.7mm SM3130 316L767676 – 76.1mm SM3130 316L888888 – 88.9mm SM3130 316LX8X8X8 – 108mm REDUCING TEE SM3131 316L181815 – 18 x 18 x 15mm SM3131 316L222215 – 22 x 22 x 15mm SM3131 316L222218 – 22 x 22 x 18mm SM3131 316L282815 – 28 x 28 x 15mm SM3131 316L282818 – 28 x 28 x 18mm SM3131 316L282822 – 28 x 28 x 22mm SM3131 316L353515 – 35 x 35 x 15mm SM3131 316L353518 – 35 x 35 x 18mm SM3131 316L353522 – 35 x 35 x 22mm SM3131 316L353528 – 35 x 35 x 28mm SM3131 316L424215 – 42 x 42 x 15mm SM3131 316L424218 – 42 x 42 x 18mm SM3131 316L424222 – 42 x 42 x 22mm SM3131 316L424228 – 42 x 42 x 28mm SM3131 316L424235 – 42 x 42 x 35mm SM3131 316L545415 – 54 x 54 x 15mm SM3131 316L545418 – 54 x 54 x 18mm SM3131 316L545422 – 54 x 54 x 22mm SM3131 316L545428 – 54 x 54 x 28mm SM3131 316L545435 – 54 x 54 x 35mm SM3131 316L545442 – 54 x 54 x 42mm SM3131 316L666628 – 66.7 x 66.7 x 28mm SM3131 316L666635 – 66.7 x 66.7 x 35mm SM3131 316L666642 – 66.7 x 66.7 x 42mm SM3131 316L666654 – 66.7 x 66.7 x 54mm SM3131 316L767622 – 76.1 x 76.1 x 22mm SM3131 316L767628 – 76.1 x 76.1 x 28mm SM3131 316L767635 – 76.1 x 76.1 x 35mm SM3131 316L767642 – 76.1 x 76.1 x 42mm SM3131 316L767654 – 76.1 x 76.1 x 54mm SM3131 316L888822 – 88.9 x 88.9 x 22mm SM3131 316L888828 – 88.9 x 88.9 x 28mm SM3131 316L888835 – 88.9 x 88.9 x 35mm SM3131 316L888842 – 88.9 x 88.9 x 42mm SM3131 316L888854 – 88.9 x 88.9 x 54mm SM3131 316L888876 – 88.9 x 88.9 x 76.1mm SM3131 316LX8X822 – 108 x 108 x 22mm SM3131 316LX8X828 – 108 x 108 x 28mm SM3131 316LX8X835 – 108 x 108 x 35mm SM3131 316LX8X842 – 108 x 108 x 42mm SM3131 316LX8X854 – 108 x 108 x 54mm SM3131 316LX8X876 – 108 x 108 x 76.1mm SM3131 316LX8X888 – 108 x 108 x 88.9mm STOP END SM3301 316L000015 – 15mm SM3301 316L000018 – 18mm SM3301 316L000022 – 22mm SM3301 316L000028 – 28mm SM3301 316L000035 – 35mm SM3301 316L000042 – 42mm SM3301 316L000054 – 54mm SM3301 316L000066 – 66.7mm SM3301 316L000076 – 76.1mm SM3301 316L000088 – 88.9mm SM3301 316L0000X8 – 108mm FULL CROSSOVER SM3085 316L001515 – 15mm SM3085 316L001818 – 18mm SM3085 316L002222 – 22mm SM3085 316L002828 – 28mm PART CORSSOVER SM3086 316L001515 – 15mm SM3086 316L001818 – 18mm SM3086 316L002222 – 22mm SM3086 316L002828 – 28mm FLANGE SM3325 316L000015 – 15mm SM3325 316L000018 – 18mm SM3325 316L000022 – 22mm SM3325 316L000028 – 28mm SM3325 316L000035 – 35mm SM3325 316L000042 – 42mm SM3325 316L000054 – 54mm SM3325 316L000066 – 66.7mm SM3325 316L000076 – 76.1mm SM3325 316L000088 – 88.9mm SM3325 316L0000X8 – 108mm REDUCED COUPLING SM3240 316L001815 – 18 x 15mm SM3240 316L002215 – 22 x 15mm SM3240 316L002218 – 22 x 18mm SM3240 316L002815 – 28 x 15mm SM3240 316L002818 – 28 x 18mm SM3240 316L002822 – 28 x 22mm SM3240 316L003515 – 35 x 15mm SM3240 316L003518 – 35 x 18mm SM3240 316L003522 – 35 x 22mm SM3240 316L003528 – 35 x 28mm SM3240 316L004215 – 42 x 15mm SM3240 316L004218 – 42 x 18mm SM3240 316L004222 – 42 x 22mm SM3240 316L004228 – 42 x 28mm SM3240 316L004235 – 42 x 35mm SM3240 316L005415 – 54 x 15mm SM3240 316L005418 – 54 x 18mm SM3240 316L005422 – 54 x 22mm SM3240 316L005428 – 54 x 28mm SM3240 316L005435 – 54 x 35mm SM3240 316L005442 – 54 x 42mm SM3240 316L006628 – 66.7 x 28mm SM3240 316L006635 – 66.7 x 35mm SM3240 316L006642 – 66.7 x 42mm SM3240 316L006654 – 66.7 x 54mm SM3240 316L007642 – 76.1 x 42mm SM3240 316L007654 – 76.1 x 54mm SM3240 316L008854 – 88.9 x 54mm SM3240 316L008876 – 88.9 x 76.1mm SM3240 316L00X854 – 108 X 54mm SM3240 316L00X876 – 108 X 76.1mm SM3240 316L00X888 - 108 X 88.9mm FITTING REDUCER SM3243 316L001815 – 18 x 15mm SM3243 316L002215 – 22 x 15mm SM3243 316L002218 – 22 x 18mm SM3243 316L002815 – 28 x 15mm SM3243 316L002818 – 28 x 18mm SM3243 316L002822 – 28 x 22mm SM3243 316L003515 – 35 x 15mm SM3243 316L003518 – 35 x 18mm SM3243 316L003522 – 35 x 22mm SM3243 316L003528 – 35 x 28mm SM3243 316L004215 – 42 x 15mm SM3243 316L004218 – 42 x 18mm SM3243 316L004222 – 42 x 22mm SM3243 316L004228 – 42 x 28mm SM3243 316L004235 – 42 x 35mm SM3243 316L005415 – 54 x 15mm SM3243 316L005418 – 54 x 18mm SM3243 316L005422 – 54 x 22mm SM3243 316L005428 – 54 x 28mm SM3243 316L005435 – 54 x 35mm SM3243 316L005442 – 54 x 42mm SM3243 316L006628 – 66.7 x 28mm SM3243 316L006635 – 66.7 x 35mm SM3243 316L006642 – 66.7 x 42mm SM3243 316L006654 – 66.7 x 54mm SM3243 316L007642 – 76.1 x 42mm SM3243 316L007654 – 76.1 x 54mm SM3243 316L008854 – 88.9 x 54mm SM3243 316L008876 – 88.9 x 76.1mm SM3243 316L00X854 – 108 x 54mm SM3243 316L00X876 – 108 x 76.1mm SM3243 316L00X888 – 108 x 88.9mm C X MI COUPLING SM3253 316L015M12 – 15 x ½” BSP (M) SM3253 316L015M34 – 15 x ¾” BSP (M) SM3253 316L018M12 – 18 x ½” BSP (M) SM3253 316L018M34 – 18 x ¾” BSP (M) SM3253 316L022M12 – 22 x ½” BSP (M) SM3253 316L022M34 – 22 x ¾” BSP (M) SM3253 316L022M10 – 22 x 1” BSP (M) SM3253 316L028M34 – 28 x ¾” BSP (M) SM3253 316L028M10 – 28 x 1” BSP (M) SM3253 316L035M10 – 35 x 1” BSP (M) SM3253 316L035MA4 – 35 x 1 ¼” BSP (M) SM3253 316L042MA4 – 42 x 1 ¼” BSP (M) SM3253 316L042MA2 – 42 x 1 ½” BSP (M) SM3253 316L054MA2 – 54 x 1 ½” BSP (M) SM3253 316L054M20 – 54 x 2” BSP (M) SM3253 316L066M20 – 66.7 x 2” BSP (M) SM3253 316L076MA2 – 76.1 x 2 ½” BSP (M) SM3253 316L088M30 – 88.9 x 3” BSP (M) C X FI COUPLING SM3250 316L015F12 – 15 x ½” BSP (F) SM3250 316L015F34 – 15 x ¾” BSP (F) SM3250 316L018F12 – 18 x ½” BSP (F) SM3250 316L018F34 – 18 x ¾” BSP (F) SM3250 316L022F12 – 22 x ½” BSP (F) SM3250 316L022F34 – 22 x ¾” BSP (F) SM3250 316L022F10 – 22 x 1” BSP (F) SM3250 316L028F34 – 28 x ¾” BSP (F) SM3250 316L028F10 – 28 x 1” BSP (F) SM3250 316L035F10 – 35 x 1” BSP (F) SM3250 316L035FA4 – 35 x 1 ¼” BSP (F) SM3250 316L042FA4 – 42 x 1 ¼” BSP (F) SM3250 316L042FA2 – 42 x 1 ½” BSP (F) SM3250 316L054FA2 – 54 x 1 ½” BSP (F) SM3250 316L054F20 – 54 x 2” BSP (F) SM3250 316L066F20 – 66.7 x 2” BSP (F) SM3250 316L076FA2 – 76.1 x 2 ½” BSP (F) SM3250 316L088F30 – 88.9 x 3” BSP (F) SWIVEL COUPLING SM3260 316L015F12 – 15 x ½” BSP Captive nut SM3260 316L018F12 – 18 x ½” BSP Captive nut SM3260 316L022F34 – 22 x ¾” BSP Captive nut SM3260 316L028F10 – 28 x 1” BSP Captive nut SM3260 316L035FA4 – 35 x 1 ¼” BSP Captive nut SM3260 316L042FA2 – 42 x 1 ½” BSP Captive nut SM3260 316L054F20 – 54 x 2” BSP Captive nut C X C X MI TEE SM3230 316L215M12 – 15 x 15 x ½” BSP (M) SM3230 316L218M12 – 18 x 18 x ½” BSP (M) SM3230 316L218M34 – 18 x 18 x ¾” BSP (M) SM3230 316L222M12 – 22 x 22 x ½” BSP (M) SM3230 316L222M34 – 22 x 22 x ¾” BSP (M) SM3230 316L228M12 – 28 x 28 x ½” BSP (M) SM3230 316L228M34 – 28 x 28 x ¾” BSP (M) SM3230 316L228M10 – 28 x 28 x 1” BSP (M) SM3230 316L235M12 – 35 x 35 x ½” BSP (M) SM3230 316L235M34 – 35 x 35 x ¾” BSP (M) SM3230 316L235MA4 – 35 x 35 x 1 ¼” BSP (M) SM3230 316L242M34 – 42 x 42 x ¾” BSP (M) SM3230 316L242MA4 – 42 x 42 x 1 ¼” BSP (M) SM3230 316L242MA2 – 42 x 42 x 1 ½” BSP (M) SM3230 316L254M34 – 54 x 54 x ¾” BSP (M) SM3230 316L254MA2 – 54 x 54 x 1 ½” SM3230 316L254M20 – 54 x 54 x 2” SM3230 316L266M34 – 66.7 x 66.7 x ¾” SM3230 316L266M20 – 66.7 x 66.7 x 2” C X C X FI TEE SM3231 316L215F12 – 15 x 15 x ½” BSP (F) SM3231 316L218F12 – 18 x 18 x ½” BSP (F) SM3231 316L218F34 – 18 x 18 x ¾” BSP (F) SM3231 316L222F12 – 22 x 22 x ½” BSP (F) SM3231 316L222F34 – 22 x 22 x ¾” BSP (F) SM3231 316L228F12 – 28 x 28 x ½” BSP (F) SM3231 316L228F34 – 28 x 28 x ¾” BSP (F) SM3231 316L228F10 – 28 x 28 x 1” BSP (F) SM3231 316L235F12 – 35 x 35 x ½” BSP (F) SM3231 316L235F34 – 35 x 35 x ¾” BSP (F) SM3231 316L242F12 – 42 x 42 x ½” BSP (F) SM3231 316L242F34 – 42 x 42 x ¾” BSP (F) SM3231 316L254F12 – 54 x 54 x ½” BSP (F) SM3231 316L254F34 – 54 x 54 x ¾” BSP (F) SM3231 316L254F20 – 54 x 54 x 2” BSP (F) SM3231 316L266F34 – 66.7 x 66.7 x ¾” BSP (F) SM3231 316L266F20 – 66.7 x 66.7 x 2” BSP (F) SM3231 316L276F34 – 76.1 x 76.1 x ¾” BSP (F) SM3231 316L276F20 – 76.1 x 76.1 x 2” BSP (F) SM3231 316L288F34 – 88.9 x 88.9 x ¾” BSP (F) SM3231 316L288F20 – 88.9 x 88.9 x 2” BSP (F) SM3231 316L2X8F34 – 108 x 108 x ¾” BSP (F) SM3231 316L2X8F20 – 108 x 108 x 2” BSP (F) C X MI 90D ELBOW SM3190 316L015M12 – 15 x ½” BSP (M) SM3190 316L015M34 – 15 x ¾” BSP (M) SM3190 316L018M12 – 18 x ½” BSP (M) SM3190 316L022M12 – 22 x ½” BSP (M) SM3190 316L022M34 – 22 x ¾” BSP (M) SM3190 316L022M10 – 22 x 1” BSP (M) SM3190 316L028M34 – 28 x ¾” BSP (M) SM3190 316L028M10 – 28 x 1” BSP (M) SM3190 316L035M10 – 35 x 1” BSP (M) SM3190 316L035MA4 – 35 x 1 ¼” BSP (M) SM3190 316L042MA2 – 42 x 1 ½” BSP (M) SM3190 316L054MA2 – 54 x 1 ½” BSP (M) SM3190 316L054M20 – 54 x 2” BSP (M) SM3190 316L066M20 – 66.7 x 2” BSP (M) SM3190 316L076MA2 – 76.1 x 76.1 x 2 ½” BSP (M) SM3190 316L088M30 – 88.9 x 88.9 x 3” BSP (M) C X FI 90D ELBOW SM3191 316L015F12 – 15 x ½” BSP (F) SM3191 316L018F12 – 18 x ½” BSP (F) SM3191 316L022F34 – 22 x ¾” BSP (F) SM3191 316L028F10 – 28 x 1” BSP (F) SM3191 316L035FA4 – 35 x 1 ¼” BSP (F) SM3191 316L042FA2 – 42 x 1 ½” BSP (F) SM3191 316L054F20 – 54 x 2” BSP (F) SM3191 316L066F20 – 66.7 x 2” BSP (F) C X MI 90D SHORT ELBOW SM3290 316L015M12 – 15 x ½” BSP (M) SM3290 316L018M12 – 18 x ½” BSP (M) SM3290 316L022M34 – 22 x ¾” BSP (M) SM3290 316L028M10 – 28 x 1” BSP (M) SM3290 316L035MA4 – 35 x 1 ¼” BSP (M) SM3290 316L042MA2 – 42 x 1 ½” BSP (M) SM3290 316L054M20 – 54 x 2” BSP (M) C X FI 90D SHORT ELBOW SM3291 316L015F12 – 15 x ½” BSP (F) SM3291 316L018F12 – 18 x ½” BSP (F) SM3291 316L022F12 – 22 x ½” BSP (F) SM3291 316L022F34 – 22 x ¾” BSP (F) SM3291 316L028F10 – 28 x 1” BSP (F) SM3291 316L035FA4 – 35 x 1 ¼” BSP (F) CXFI 90D WALLPLATE ELBOW SM3390 316L015F12 – 15 x ½” BSP (F) SM3390 316L018F12 – 18 x ½” BSP (F) SM3390 316L022F34 – 22 x ¾” BSP (F) SM3390 316L028F10 – 28 x 1” BSP (F) SM3390 316L035FA4 – 35 x 1 ¼” BSP (F)

Approval Holder:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Manufacturer:

Linhai Yongsheng Pipe Co., Ltd

Company Name

Linhai Yongsheng Pipe Co., Ltd

Address

NO 7-270 FENXI VILLAGE DUQIAO LINHAI

Country

Zhejiang

Phone

0086-576-85528969

View All Listings by this Company

Range of compression fittings with brass bodies for use with copper pipe (EN1057). Above ground use only. Maximum working pressure 16 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2305343

Size:

see model

Marking:

EN1254-2 & size on nut. HonSon logo (ISI) on fitting body

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

HS100-001 Equal Straight: HS100-001-01 8×8, HS100-001-02 10×10, HS100-001-03 12×12, HS100-001-04 14×14, HS100-001-05 15×15, HS100-001-06 16×16, HS100-001-07 18×18, HS100-001-08 22×22, HS100-001-09 28×28, HS100-001-13 15×15 (82mm length), HS100-001-14 22×22 (82mm length). HS100-002 Reducing Straight: HS100-002-01 10×8, HS100-002-02 12×8, HS100-002-03 12×10, HS100-002-04 15×8, HS100-002-05 15×10, HS100-002-06 15×12, HS100-002-07 18×15, HS100-002-08 22×15, HS100-002-09 22×18, HS100-002-10 28×15, HS100-002-11 28×22. HS100-003 Female Straight: HS100-003-01 8×1/4" F, HS100-003-02 8×3/8" F, HS100-003-03 10×1/4" F, HS100-003-04 10×3/8" F, HS100-003-05 10×1/2" F, HS100-003-06 12×3/8" F, HS100-003-07 12×1/2" F, HS100-003-08 14×3/8" F, HS100-003-09 14×1/2" F, HS100-003-10 15×1/4" F, HS100-003-11 15×3/8" F, HS100-003-12 15×1/2" F, HS100-003-13 15×3/4" F, HS100-003-14 15×1" F, HS100-003-15 16×1/2"F, HS100-003-16 16×3/4" F, HS100-003-17 18×1/2" F, HS100-003-18 18×3/4" F, HS100-003-19 22×1/2" F, HS100-003-20 22×3/4" F, HS100-003-21 22×1" F, HS100-003-22 28×3/4" F, HS100-003-23 28×1" F. HS100-004 Male Straight: HS100-004-01 8×1/8"M, HS100-004-02 8×1/4"M, HS100-004-03 8×3/8"M, HS100-004-04 8×1/2"M, HS100-004-05 10×1/4"M, HS100-004-06 10×3/8"M, HS100-004-07 10×1/2"M, HS100-004-08 12×3/8"M, HS100-004-09 12×1/2"M, HS100-004-10 14×3/8"M, HS100-004-11 14×1/2"M, HS100-004-12 14×3/4"M, HS100-004-13 15×1/4"M, HS100-004-14 15×3/8"M, HS100-004-15 15×1/2"M, HS100-004-16 15×3/4"M, HS100-004-17 16×1/2"M, HS100-004-18 16×3/4"M, HS100-004-19 18×1/2"M, HS100-004-20 18×3/4"M, HS100-004-21 22×1/2"M, HS100-004-22 22×3/4"M, HS100-004-23 22×1"M, HS100-004-24 22×1 1/4"M, HS100-004-25 28×3/4"M, HS100-004-26 28×1"M. HS100-005 Equal Elbow HS100-005-01 8×8, HS100-005-02 10×10, HS100-005-03 12×12, HS100-005-04 14×14, HS100-005-05 15×15, HS100-005-06 16×16, HS100-005-07 18×18, HS100-005-09 22×22, HS100-005-11 28×28. HS100-006 Female Elbow: HS100-006-01 8×1/4"F, HS100-006-02 10×3/8"F, HS100-006-03 12×1/2"F, HS100-006-04 14×1/2"F, HS100-006-05 15×1/2"F, HS100-006-06 15×3/4"F, HS100-006-07 16×1/2"F, HS100-006-08 18×1/2"F, HS100-006-09 18×3/4"F, HS100-006-10 22×1/2"F, HS100-006-11 22×3/4"F, HS100-006-12 22×1"F, HS100-006-13 28×1"F. HS100-007 Male Elbow: HS100-007-01 8×1/4"M, HS100-007-02 10×1/4"M, HS100-007-03 10×3/8"M, HS100-007-04 12×1/2"M, HS100-007-05 14×1/2"M, HS100-007-06 15×1/4"M, HS100-007-07 15×3/8"M, HS100-007-08 15×1/2"M, HS100-007-09 15×3/4"M, HS100-007-10 16×1/2"M, HS100-007-11 18×1/2"M, HS100-007-12 18×3/4"M, HS100-007-13 22×1/2"M, HS100-007-14 22×3/4"M, HS100-007-15 22×1"M, HS100-007-16 28×1"M. HS100-008 Equal Tee: HS100-008-01 8×8×8, HS100-008-02 10×10×10, HS100-008-03 12×12×12, HS100-008-04 14×14×14, HS100-008-05 15×15×15, HS100-008-06 16×16×16, HS100-008-07 18×18×18, HS100-008-08 22×22×22, HS100-008-09 28×28×28. HS100-009 Reducing Tee: HS100-009-01 15×15×22, HS100-009-02 18×18×15, HS100-009-03 18×15×18, HS100-009-04 22×15×15, HS100-009-05 22×15×22, HS100-009-06 22×22×15, HS100-009-07 22×22×18, HS100-009-08 28×22×15, HS100-009-09 28×28×15, HS100-009-10 28×15×28, HS100-009-11 28×22×22, HS100-009-12 28×28×22, HS100-009-13 28×22×28. HS100-010 Female Tee: HS100-010-01 12×1/2“F, HS100-010-03 15×1/2“F, HS100-010-05 18×1/2“F, HS100-010-06 18×3/4“F, HS100-010-07 22×1/2”F, HS100-010-08 22×3/4”F, HS100-010-09 28×1/2”F, HS100-010-10 28×3/4”F, HS100-010-11 28×1”F. HS100-011 Wallplate Elbow: HS100-011-01 12×1/2"F, HS100-011-02 14×1/2"F, HS100-011-03 15×1/2"F, HS100-011-05 18×1/2"F, HS100-011-06 18×3/4"F, HS100-011-07 22×1/2"F, HS100-011-08 22×3/4"F. HS100-012 Water Tank Connector : HS100-012-01 15, HS100-012-02 22, HS100-012-03 28. HS100-013 Stop End: HS100-013-01 8, HS100-013-02 10, HS100-013-03 12, HS100-013-04 15, HS100-013-05 18, HS100-013-06 22, HS100-013-07 28. HS100-014 Str Tap Connector: HS100-014-01 15×1/2"F, HS100-014-02 15×3/4"F, HS100-014-03 22×3/4"F. HS100-015 Bent Tap Connector: HS100-015-01 15×1/2"F, HS100-015-02 22×3/4"F. HS100-016 Crossover Bridge: HS100-016-01 15×15, HS100-016-02 18×18, HS100-016-03 22×22. HS100-017 Reduced Riece: HS100-017-01 15×8, HS100-017-02 15×10, HS100-017-03 22×15, HS100-017-04 28×15, HS100-017-05 28×22. HS100-018 3 Part Reduced Set: HS100-018-01 10×8, HS100-018-02 12×8, HS100-018-03 15×8, HS100-018-04 15×10, HS100-018-05 15×12, HS100-018-06 22×15, HS100-018-07 28×15, HS100-018-08 28×22. HS100-019 Water Tank Connector: HS100-019-01 15×1/2"M, HS100-019-02 22×3/4"M, HS100-019-03 28×1"M. HS100-020 45 Degree Elbow: HS100-020-01 15×15, HS100-020-02 22×22, HS100-020-03 28×28.

Approval Holder:

Wenling Honson Brassware Co., Ltd

Company Name

Wenling Honson Brassware Co., Ltd

Address

Yingtian Village Chengnan Town Wenling City Taizhou Zhejiang 317515

Country

China

View All Listings by this Company

Manufacturer:

Wenling Honson Brassware Co., Ltd

Company Name

Wenling Honson Brassware Co., Ltd

Address

Yingtian Village Chengnan Town Wenling City Taizhou Zhejiang 317515

Country

China

View All Listings by this Company

Range of end feed copper fittings for use with copper tube to EN 1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2208820

Size:

End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

31/08/2027

Model:

659811 JET REDUCER 67X28mm, 659812 JET REDUCER 67X35mm, 659813 JET REDUCER 67X42mm, 659814 JET REDUCER 67X54mm, 659815 JET REDUCER 76X35mm, 659816 JET REDUCER 76X42mm, 659817 JET REDUCER 76X54mm, 659818 JET REDUCER 76X67mm, 659819 JET REDUCER 108X42mm, 659820 JET REDUCER 108X54mm, 659821 JET REDUCER 108X67mm, 659822 JET REDUCER 108X76mm 659833 JET STRAIGHT COUPLING 67mm, 659834 JET STRAIGHT COUPLING 76mm, 659835 JET STRAIGHT COUPLING 108mm, 659838 JET REDUCED TEE 67X67X28mm, 659839 JET REDUCED TEE 67X67X35mm, 659840 JET REDUCED TEE 67X67X42mm, 659841 JET REDUCED TEE 67X67X54mm, 659842 JET REDUCED TEE 76X76X28mm, 659843 JET REDUCED TEE 76X76X35mm, 659844 JET REDUCED TEE 76X76X42mm, 659845 JET REDUCED TEE 76X76X54mm, 659846 JET REDUCED TEE 108X108X35mm, 659847 JET REDUCED TEE 108X108X54mm, 659848 JET REDUCED TEE 108X108X76mm, 659853 JET EQUAL TEE 67mm, 659854 JET EQUAL TEE 76mm, 659855 JET EQUAL TEE 108mm 659858 JET STOP END 67mm, 659859 JET STOP END 76mm, 659860 JET STOP END 108mm 659863 JET 90D ELBOW 67mm, 659864 JET 90D ELBOW 76mm, 659865 JET 90D ELBOW 108mm, 659868 JET 45D ELBOW 67mm, 659869 JET 45D ELBOW 76mm, 659870 JET45D ELBOW 108mm, 659927 JET 45D STREET ELBOW 67mm, 659928 JET 45D STREET ELBOW 76mm, 659929 JET 90D LONG RADIUS BEND 67mm, 659930 JET 90D LONG RADIUS BEND 76mm, 659931 JET 90D LONG RADIUS BEND 108mm 659873 * JET BRAZING FEMALE IRON ADAPTOR 76X3 659874 * JET BRAZING FEMALE IRON ADAPTOR 108X4 659875 * JET BRAZING MALE IRON ADAPTOR 67X2.1/2 659876 * JET BRAZING MALE IRON ADAPTOR 76X3 659877 * JET BRAZING MALE IRON ADAPTOR 108X4 659926 * JET BRAZING FEM IRON ADAPTOR 67X21.1/2

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112370

Size:

see models

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CSF28 90°Elbow Close Ruff C×C (8,10,12,15,22,28,35,42,54mm) CSF29 90°Street Elbow Close Ruff Ftg×C (8,10,12,15,22,28,35,42,54mm) CSF38 Reducing 90° Elbow C×C ( 22×15, 28×22, 28×15) CSF30 45°Elbow C×C(8,10,12,15,22,28,35,42,54mm) CSF39 45°Elbow FTG×C(8,10,12,15,22,28,35,42,54mm) CSF31 Equal Tee C×C×C(8,10,12,15,22,28,35,42,54mm) CSF32 Reducing TEE C×C×C (15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15) CSF23 Equal Coupling C×C (8,10,12,15,22,28,35,42,54mm) CSF25 Reducing Coupling C×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF26 Fitting Reducer Ftg×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF27 Tube Cap (8,10,12,15,22,28,35,42,54mm) CSF33 Cross Over Coupling C×C(15,22mm) CSF40 Partial Cross Over Ftg×C (15,22mm) CSF34 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF35 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF07 90°Elbow Close Ruff C×C (6,8,10,12,15,22,28,35,42,54mm) CSF08 90°Street Elbow Close Ruff Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF41 Reducing 90° Elbow C×C (12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28) CSF10 45°Elbow C×C(6,8,10,12,15,22,28,35,42,54mm) CSF11 45°Elbow FTG×C(6,8,10,12,15,22,28,35,42,54mm) CSF42 90°Elbow Long Turn C×C 6,8,10,12,15,22,28,35,42,54mm) CSF43 90°Street Elbow Long Turn Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF13 Equal Tee C×C×C(6,8,10,12,15,22,28,35,42,54mm) CSF45 Reducing TEE C×C×C (6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12,15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22,22×15×15, 22×15×12,28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15,35×35×28, 35×35×22, 35×35×15,35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35,42×42×28, 42×42×22, 2x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22,54×54×15,54×42×54, 54×35×54) CSF01 Equal Coupling C×C (6,8,10,12,15,22,28,35,42,54mm) CSF04 Reducing Coupling C×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF05 Fitting Reducer Ftg×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15,28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF16 Tube Cap (6,8,10,12,15,22,28,35,42,54mm) CSF46 Return Bend C×C(6,8,10,12,15,22,28,35,42,54mm) CSF14 Cross Over Coupling C×C(15,22mm) CSF15 Partial Cross Over Ftg×C (15,22mm) CSF21 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF19 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of float operated electrical switches with plastic bodies. Cold water use only.

Section:

1300 Float Operated Electrical Switches

Marking:

TOTO on adhesive label on body.

Installation Requirements:

R001 R008

Expiry date:

31/05/2028

Model:

TOTO FS001 (5V/0,2A switch point 19mm / 51mm), TOTO FS002 (5V/0,2A switch point 19mm / 39mm).

Approval Holder:

TOTO Europe GmbH

Company Name

TOTO Europe GmbH

Address

Zollhof 2 40211 Düsseldorf Germany

Phone

+49 211 273080

View All Listings by this Company

Range of ultrasonic water meters with plastic (PL) or brass (BR) bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating Temperature 50 C

Section:

1505 Water Meters

Size:

1” BSP (M).

Marking:

Sagemcom logo, type of meter, CE and year of manufacturer (YY) on faceplate of meter.

Installation Requirements:

R001

Expiry date:

31/03/2028

Model:

Siconia WM 20 range Full model code example: WM 20 L 868 I BR 110 R250 Q4 T30 VDF CUST All available options as follows: Product Type: WM = WM: IP68 product. Thread: 20 = DN20: thread reference diameter (G1”). Radio: L = LoRa™ radio, M = Wireless MBus radio, NB = 4G CAT-NBloT radio, CM = 4G CAT-M radio. Frequency: 868 = 868 MHz frequency band (LoRa™, Wireless MBus radio), 8-20 = 4G frequencies band. Country: I = I for India country band definition (optional). Product pipe (body) material: BR = Brass pipe, PL = Plastic pipe. Product pipe length: 130 = Pipe Length in mm (Brass Only), 165 = Pipe Length in mm (Brass & Plastic), 190 = Pipe Length in mm (Brass & Plastic). Ratio: R250 = R MID ratio. Q3: Q2.5 = Q3 MID reference flow and associated inlet/transducer. Here Q3=2.5m3/h, Q4 = Q3=4.0m3/h. Temperature: T50 = MID temperature range. Phone Cell Carrier: VDF = Vodafone carrier, VZW = Verizon carrier. Configuration: PROTO = Product configuration and security. CUST = Customer name.

Approval Holder:

Sagemcom Energy & Telecom

Company Name

Sagemcom Energy & Telecom

View All Listings by this Company

Range of in-line ultrasonic water meters with DZR brass bodies. The following sizes only include a plastic strainer, DN15 - DN32 sizes (incorporated), DN40 size (optional). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1505 Water Meters

Size:

DN15 = ¾” BSP (M), DN20 = 1” BSP (M), DN25 = 1¼” BSP (M), DN32 = 1½” BSP (M), DN40 = DN40 Flanged or 2” BSP (M), DN50 = DN50 Flanged or 2½” BSP (M).

Marking:

Diehl logo, Hydrus, CE, size, pressure and other technical information on casing.

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

HYDRUS 1.3 Type 171 range: DN15, with 110, 165 & 170mm length, DN20, with 110, 130, 165, 175, 190 & 220mm length, DN25, with 150, 175, & 260mm length, DN32, with 260mm length, DN40, with 200 & 300mm length (200mm not available on flanged model), DN50, with 270 & 300mm length.

Approval Holder:

Diehl Metering GmbH & Diehl Metering Poland.

Company Name

Diehl Metering GmbH & Diehl Metering Poland.

Address

Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH & Diehl Metering Poland.

Company Name

Diehl Metering GmbH & Diehl Metering Poland.

Address

Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Range of water meters with brass (CW724R & CC770S) and plastic (Composite) bodies, incorporating plastic strainers and EPDM ‘O’- rings. Maximum working pressure 16.0 Bar. Temperature: 60.0°C for brass (CW724R & CC770S) models & Cold water use only for composite models.

Section:

1505 Water Meters

Size:

DN15 – 3.4” BSP (M), DN20 – 1” BSP (M), DN25 – 1.1/4” BSP (M) or DN25 Flanged, DN32 – 1.1/2” BSP (M) or DN32 Flanged, DN40 – 2” BSP (M) or DN40 Flanged.

Marking:

Hydrus, Diehl Metering and product info on casing. Flow arrow on body and cover.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

HYDRUS 2 (CW724R): DN15 – Lengths 110, 165 & 170mm, DN20 – Lengths 105, 130, 165, 175, 190 & 220mm, DN25 – Lengths 135, 150, 175 & 260mm, DN32 – Length 260mm, DN40 – Lengths 200 & 300mm. HYDRUS 2 (CC770S): DN25 – Length 260mm, DN32 – Length 260mm, DN40 – Length 300mm. HYDRUS 2 (Composite): DN15 – Lengths 110, 115, 165 & 170mm, DN20 – Length 190mm.

Approval Holder:

Diehl Metering GmbH & Diehl Metering Poland.

Company Name

Diehl Metering GmbH & Diehl Metering Poland.

Address

Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Manufacturer:

Diehl Metering GmbH & Diehl Metering Poland.

Company Name

Diehl Metering GmbH & Diehl Metering Poland.

Address

Industiestrasse 13 91522 Ansbach Germany

View All Listings by this Company

Talbot Modular Manifold System with and without concentric water meter connections with plastic bodies incorporating screw down stopvalves. Maximum working pressure 16 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Size:

see model

Marking:

Talbot (brand of Atlantic Plastics Ltd.) on manifold body.

Installation Requirements:

R001 R120

Expiry date:

30/04/2028

Model:

2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet and concentric connection x 25mm PE outlet E3707, MANIF 2 PF 50 X 25MM E3708, MANIF 3 PF 50 X 25MM E3709, MANIF 4 PF 50 X 25MM E3710, MANIF 5 PF 50 X 25MM E3711, MANIF 6 PF 50 X 25MM E3712, MANIF 7 PF 50 X 25MM E3713, MANIF 8 PF 50 X 25MM E3714 MANIF 9 PF 50 X 25MM E3715, MANIF 10 PF 50 X 25MM E3716, MANIF 11 PF 50 X 25MM E3717 MANIF 12 PF 50 X 25MM E3718, MANIF 2 PF 63 X 25MM E3719, MANIF 3 PF 63 X 25MM E3720, MANIF 4 PF 63 X 25MM E3721 MANIF 5 PF 63 X 25MM E3722, MANIF 6 PF 63 X 25MM E3723, MANIF 7 PF 63 X 25MM E3724, MANIF 8 PF 63 X 25MM E3725 MANIF 9 PF 63 X 25MM E3726, MANIF 10 PF 63 X 25MM E3727, MANIF 11 PF 63 X 25MM E3728 MANIF 12 PF 63 X 25MM Talbot Modular Manifold System 2 port to 12 port with 2” BSP; 50mm & 63mm PE inlet x ¾” BSP; 25mm outlets E3751 MANIF 2 PF 50 X 25MM E3752 MANIF 3 PF 50 X 25MM E3753 MANIF 4 PF 50 X 25MM E3754 MANIF 5 PF 50 X 25MM E3755 MANIF 6 PF 50 X 25MM E3756 MANIF 7 PF 50 X 25MM E3757 MANIF 8 PF 50 X 25MM E3758 MANIF 9 PF 50 X 25MM E3759 MANIF 10 PF 50 X 25MM E3760 MANIF 11 PF 50 X 25MM E3761 MANIF 12 PF 50 X 25MM E3762 MANIF 2 PF 63 X 25MM E3763 MANIF 3 PF 63 X 25MM E3764 MANIF 4 PF 63 X 25MM E3765 MANIF 5 PF 63 X 25MM E3766 MANIF 6 PF 63 X 25MM E3767 MANIF 7 PF 63 X 25MM E3768 MANIF 8 PF 63 X 25MM E3769 MANIF 9 PF 63 X 25MM E3770 MANIF 10 PF 63 X 25MM E3771 MANIF 11 PF 63 X 25MM E3772 MANIF 12 PF 63 X 25MM

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of tap outlets with plastic bodies incorporating a filter within the body with a hollow fibre filter membrane The filters are supplied with (and must be used with) a chrome plated brass adapter which incorporates a plastic flow regulator. Open outlet use only.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2212320

Note:

Claims made by the manufacturer of performance have not been assessed and are not part of this approval

Size:

Please refer to model.

Marking:

T Safe logo, data matrix code, Model No and other tech info on body.

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

02-831200 Medical Tap Filter 92 Day, Standard Flow (19.33mm pushfit). 02-831201/02-831201CE Medical Tap Filter 92 Day, Laminar Flow (19.29mm pushfit). 02-831202 Medical Tap Filter 31 Day, Standard Flow (19.08mm pushfit). 02-831203/02-831203CE Medical Tap Filter 31 Day, Laminar Flow (19.34mm pushfit). 02-831204 Medical Tap Filter 92 Day, Standard Flow, Sterile Packed (19.33mm pushfit). 02-831205 Medical Tap Filter 92 Day, Laminar Flow, Sterile Packed (19.29mm pushfit). 02-831206 Medical Tap Filter 31 Day, Standard Flow, Sterile Packed (19.08mm pushfit). 02-831207 Medical Tap Filter 31 Day, Laminar Flow, Sterile Packed (19.34mm pushfit). Models added August 2024: 02-831210 Medical Tap Filter Side Mount 62 day LF (19.29mm pushfit). 02-831212 Medical Tap Filter Side Mount 62 day SF (19.33mm pushfit).

Approval Holder:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Manufacturer:

T-safe A/S

Company Name

T-safe A/S

Address

Gydevang 1, Alleroed

Postcode

3450

Country

Denmark

Phone

+45 61610518

General Email

moj@t-safe.com

View All Listings by this Company

Range of shower elbows/holders with brass or stainless-steel bodies (various finishes). The elbows incorporate a plastic flow regulator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models VOLA 070-XX & VOLA 070R-XX are supplied with a shower hose and handset.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2212040

Note:

Open outlet use only.

Marking:

VOLA on body of shower elbows/holders

Installation Requirements:

R001 R040

Expiry date:

31/12/2027

Model:

Elbow & wall plate: VOLA 070-T2-XX. VOLA 070R-T2-XX. VOLA 070-HT2-XX. Elbow, wall plate, hand shower & hose: VOLA 070-XX. VOLA 070R-XX. XX denotes finish and, on models with brass bodies, is replaced with: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey,12=Mocca,14=Bright Red,15=Dark Blue, 16=Chrome,17=Gloss Black,18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 59=Brushed Natural Brass, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 66=Dark Gold, 68=Nickel, 61=Brushed Black, B64=Brushed Copper, B70=Brushed Gold. XX denotes finish and, on models with stainless steel bodies, is replaced with: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold, 71=Brushed Dark Copper.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of ceiling or wall mounted shower outlets, (brass or stainless-steel bodies - various finishes) incorporating EPDM `O` rings. Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305702

Note:

Open outlet use only.

Size:

¾” BSP (M)

Marking:

VOLA on shower face

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

VOLA 060-XX Brass VOLA 060-XX Stainless Steel VOLA 060A-XX Brass VOLA 060A-XX Stainless steel Model VOLA 060-XX, VOLA 060A-XX. Brass and Stainless-Steel variants are available with different surface finishes. Suffix “XX” indicate the number of surface finish and denotes: For Brass: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

A range of ceiling mounted and wall mounted shower outlets (brass and stainless-steel bodies - various finishes) incorporating EPDM O-rings.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2304045

Note:

Open outlet use only.

Size:

¾” BSP (M)

Marking:

VOLA on body

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

VOLA 050-XX Head shower, Wall mounted VOLA 050A-XX Head shower, Ceiling mounted VOLA 050K-XX Adjustable body jet Model VOLA 050-XX, VOLA 050A-XX, VOLA 050K-XX. Brass and Stainless-Steel variants are available with different surface finishes. Suffix “XX” indicate the number of surface finish and denotes: For Brass: 02=Grey, 04=Blue, 05=Orange, 06=Light Green, 08=Yellow, 09=Dark Grey, 12=Mocca, 14=Bright Red, 15=Dark Blue, 16=Chrome, 17=Gloss Black, 18=White, 19=Natural Brass, 20=Brushed Chrome, 21=Carmine Red, 25=Pink, 27=Matt Black, 28=Matt White, 60=Black, 62=Deep Black, 63=Copper, 65=Gold, 68=Nickel. For Stainless Steel: 40=Stainless Steel, 61=Brushed Black, 64=Brushed Copper, 70=Brushed Gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Range of shower handsets and an overhead shower outlet with plastic bodies (chrome plated, chrome plated/white or chrome plated/black coloured finish - see model). The inlet of the 2.1981.018 model incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Non-metallic materials and components comply with BS6920 at 55°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2304331

Note:

Open outlet use only.

Size:

Shower handsets: ½” BSP (M). Overhead shower: ½” BSP (F).

Marking:

Shower handsets: Mira Showers on body. Overhead shower: Kohler Mira Limited on body.

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

Shower handsets: 2.1981.017 (MODULE: 1504265) MIRA 360 HANDSET (chrome plated handset/white rotating outlet), 2.1981.018 (MODULE: 148927) MIRA 360 HANDSET (chrome plated handset/black rotating outlet). Overhead shower: 2.1981.019 (MODULE: 148927) MIRA SIGNATURE OVERHEAD (chrome plated)

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of shower outlets (brass or stainless-steel bodies – various finishes) incorporating EPDM O-rings. Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305034

Size:

¾” BSP (M)

Marking:

VOLA logo on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

080W-XX Brass 080W-XX Stainless-steel ‘xx’ denotes the surface finish and is replaced by: 02=grey; 04=blue; 05=orange; 06=green; 08=yellow; 09=dark grey; 12=mocha; 14=orange-red; 15=dark blue; 16=chrome; 17=black; 18=white; 19=brass(raw); 20=brushed chrome; 21=red; 25=pink; 27=dull black; 40=Stainless Steel; 60=black chrome; 61=brushed black chrome; 62=piano black; 63=copper; 64=brushed copper; 65=bright gold; 66=dark gold; 67=brushed dark gold; 68=nickel; 69=brushed nickel; 70=brushed bright gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Wall mounted shower outlet (brass body – various finishes). The product is supplied with shower hose and handset that incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2304319

Size:

½” BSP (F)

Marking:

Graff on back plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2028

Model:

E-8627-yy-T “T” – means that product doesn’t include CV valve. ‘yy’ at the end of model denotes finish, and can be replaced with: 1. PC polished chrome 11. BB Brushed Brass PVD 2. SN Steelnox® Satin Nickel 12. GM Gunmetal 3. BNi Brushed Nickel 13 MBK Matt Black 4. PN Polished Nickel 14 OX Onyx PVD 5. OB. Olive Bronze 15. PB Polished Brass PVD 6. BK Black 16. RG OR’osa PVD 7. WT White 17. UBB Un-Finished brushed Brass 8. UB Un-Finished Brass 18. VBB Vintage Brass Finish 9. BAu Brushed 24K Gold 19. BOX Brushed Onyx PVD 10. AU 24K Gold 20. BRG Brushed OR’osa PVD

Approval Holder:

Graff Faucets Co.

Company Name

Graff Faucets Co.

Address

3701 W. Burnham St. Milwaukee, WI 5315

Country

USA

Phone

+1 414.649.9850

General Email

techsupport@graff-faucets.com

View All Listings by this Company

Wall mounted and ceiling mounted shower arms (chromium plated brass).

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306066

Note:

Open outlet use only.

Size:

½” BSP (M).

Marking:

Bonomi on body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

302132/49A - Wall Mounted Arm, 112232/19A - Ceiling Mounted Arm.

Approval Holder:

Idrosanitaria Bonomi SpA

Company Name

Idrosanitaria Bonomi SpA

Address

Via Monsuello, 36 Lumezzane S.S Brescia

Postcode

25065

Country

Italy

Phone

+39 030 8922111

General Email

massimoplati@idrobonomi.com

View All Listings by this Company

Manufacturer:

Idrosanitaria Bonomi SpA

Company Name

Idrosanitaria Bonomi SpA

Address

Via Monsuello, 36 Lumezzane S.S Brescia

Postcode

25065

Country

Italy

Phone

+39 030 8922111

General Email

massimoplati@idrobonomi.com

View All Listings by this Company

Pillar taps with chromium plated - brass bodies incorporating a quarter turn ceramic disc headwork, with single lever type operating members. The spout outlet incorporates a flow straightener. The product is supplied with plastic backnuts. Maximum working pressure 10 bar.

Non-metallic materials and components comply with BS6920 at 45°C

Section:

1800 Taps

Section Subtitle:

Pillar tap(s).

WRAS Approval Number:

2305307

Size:

¾” BSP(M)

Marking:

Mira Showers on rear of body

Installation Requirements:

R001 R005

Expiry date:

31/05/2028

Model:

1.1900.041 – Mira Assist.Pillar Tap

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Manufacturer:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of stainless-steel interlocked, PVC lined shower hoses available in lengths between 50cm & 200cm.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

1860 Tubes

Section Subtitle:

Plastic hoses.

WRAS Approval Number:

2304006

Note:

Open outlet use only

Size:

½” BSP (F)

Marking:

Jetom, WRAS and the year of manufacture “YYYY” on conical nut or ferrule

Installation Requirements:

R001

Expiry date:

30/04/2028

Model:

H1143, H21K5, H2104, H21H7, H2101, H2125, H2105, H2194, H21B1, H2114, H2201, H2225, H2205, H2294, H22B1, H2214, H2301, H2394, H23B1, H2314, H2307, H2306, H23J2, H2401, H2425, H2405, H2494, H24B1, H2414, H2128, H2158, H2130, H2228, H2258, H2230, H2328, H2358, H2330, H2428, H2458 & H2430.

Approval Holder:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

General Email

dingqingfeng@jetom.com.cn

View All Listings by this Company

Manufacturer:

Quanzhou Jetom Hose Industry Co. Ltd.

Company Name

Quanzhou Jetom Hose Industry Co. Ltd.

Address

High-Tech Industrial Zone, Luncang Town Nan'an City, Quanzhou City, Fujian Province

Postcode

362000

Country

China

Phone

+86 595 68979514

General Email

dingqingfeng@jetom.com.cn

View All Listings by this Company