Directory Search Results

Fittings Materials
Print List

#2310157

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:
1000 Expansion Vessels
WRAS Approval Number:
2310157
Note:
Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.
Size:
2” or 2 ½” BSP (F)
Marking:
CORE, model, pressure, capacity and other technical information on adhesive label on body.
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: CORE 1000 Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: CORE 750L
Approval Holder:
Smith Brothers Stores Limited
Company Name
Smith Brothers Stores Limited
Address
Unit V2 Winchester Avenue, Blaby, Leicester
Postcode
LE8 4GZ
Phone
0116 222 7330
General Email
kel.phillips@sbs.co.uk

View All Listings by this Company

Print This Approval

#240904721

Filling loop assembly, incorporating a stainless-steel braided EPDM lined flexible hose assembly, an isolation valve (DZR brass body) and a combined isolation valve and non-verifiable double check valve assembly (DZR brass body) which incorporates 2 check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1015 Filling Loop
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm compression
Marking:
Justlink, WRAS and year of manufacture (YYYY) on crimp connection of flexible hose. Flow arrow, CR and size on body of combined isolation valve and double check valve. Flow arrow on isolation valve
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
JL-LTF-1
Approval Holder:
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Company Name
Yuhuan Jianglin Plumbing Hose & Parts Inc.
Address
2 Jindifu Road, Yuhuan Economic Development Zone, Yuhuan, Zhejiang, 317600
Country
China
Phone
86-576-89901684
General Email
coo@cnjianglin.com

View All Listings by this Company

Print This Approval

#2205101

Range of medical sterilised water filter cartridges with plastic bodies and EPDM ‘O’-Rings. Models SMTFW-SLSS / SMTFD-SLSS incorporate a check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum Working Temperature: 50°C.

Section:
1050 Filters and Housings
WRAS Approval Number:
2205101
Note:
Open Outlet Use Only. Claims made by the manufacturer have not been tested and are not considered part of the approval listing.
Marking:
Spectrum on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170
Expiry date:
31/05/2027
Model:
SMSF-SLSS: Medical Shower Filter Sterilised Starter Set (Connection 1/2" BSP/NPT M) SMTFW-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) SMTFD-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT)
Approval Holder:
Spectrum
Company Name
Spectrum
Address
20/20 Business Park, Maidstone, Kent
Postcode
ME16 0LS
Country
United Kingdom
Phone
01622621940
General Email
jasmine@fileder.co.uk

View All Listings by this Company

Print This Approval

#2107341

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2107341
Size:
See model
Marking:
Flowflex logo, WRAS & size on body.
Installation Requirements:
R001
Expiry date:
31/07/2026
Model:
CU Press Equal Elbow 90 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Street Elbow 90 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Equal Elbow 45 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Street Elbow 45 deg 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Crossover 15mm, 22mm, 28mm CU Press Street Crossover 15mm, 22mm, 28mm CU Press Street Coupling 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU Press Equal Tee 15mm, 22mm, 28mm, 35mm, 42mm, 54mm CU PRESS REDUCED BRANCH TEE CU PRESS REDUCED END AND BRANCH TEE CU PRESS REDUCED END TEE 15x15x22mm;22x15x15mm;22x15x22mm 22x22x15mm;22x22x28mm;28x15x15mm 28x15x22mm;28x22x15mm;28x22x22mm 28x22x28mm;28x28x15mm;28x28x22mm 28x28x35mm;35x22x22mm;35x22x35mm 35x28x22mm;35x28x28mm;35x28x35mm 35x35x15mm;35x35x22mm;35x35x28mm 40x28x28mm;42x35x35mm;42x28x42mm 42x35x42mm;42x42x15mm;42x42x22mm 42X42X28mm;42X42X35mm;54X54X15mm 54X54X28mm;54X54X35mm;54X42X42mm 54X54X42mm CU PRESS FITTING REDUCER 22x15mm;28x15mm;28x22mm;35x15mm 35x22mm;35x28mm;42x15mm;42x22mm 42x28mm;42x35mm;54x15mm;54x22mm 54x28mm;54x35mm;54x42mm CU PRESS FITTING REDUCER 22x15mm;28x15mm;28x22mm;35x15mm 35x22mm;35x28mm;42x15mm;42x22mm 42x28mm;42x35mm;54x15mm;54x22mm 54x28mm;54x35mm;54x42mm CU PRESS STOP END 15mm, 22mm, 28mm, 35mm, 42mm, 54mm
Approval Holder:
Flowflex Components Ltd.
Company Name
Flowflex Components Ltd.
Address
Samuel Blaser Works Dew Pond Lane Tongue Lane Industrial Estate Buxton
Postcode
SK17 7LR
Country
United Kingdom
Phone
+44 1298 77211 Fax: 01298 72362 Telex: 666482
General Email
daniel.jones@fowflex.com

View All Listings by this Company

Print This Approval

#240404060

Range of PFD press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240404060
Size:
see models
Marking:
PFD & size etched on body.
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
60111515 15mm Pressfit Coupler 60112222 22mm Pressfit Coupler 60112828 28mm Pressfit Coupler 60113535 35mm Pressfit Coupler 60114242 42mm Pressfit Coupler 60115454 54mm Pressfit Coupler 60171515 15mm Pressfit Slip Coupler 60172222 22mm Pressfit Slip Coupler 60172828 28mm Pressfit Slip Coupler 60173535 35mm Pressfit Slip Coupler 60174242 42mm Pressfit Slip Coupler 60175454 54mm Pressfit Slip Coupler 60411515 15mm Pressfit Elbow 60412222 22mm Pressfit Elbow 60412828 28mm Pressfit Elbow 60413535 35mm Pressfit Elbow 60414242 42mm Pressfit Elbow 60415454 54mm Pressfit Elbow 60431515 15mm Pressfit Street Elbow 60432222 22mm Pressfit Street Elbow 60432828 28mm Pressfit Street Elbow 60433535 35mm Pressfit Street Elbow 60434242 42mm Pressfit Street Elbow 60435454 54mm Pressfit Street Elbow 60451515 15mm Pressfit Obtuse Elbow 60452222 22mm Pressfit Obtuse Elbow 60452828 28mm Pressfit Obtuse Elbow 60453535 35mm Pressfit Obtuse Elbow 60454242 42mm Pressfit Obtuse Elbow 60455454 54mm Pressfit Obtuse Elbow 60481515 15mm Pressfit Obtuse Street Elbow 60482222 22mm Pressfit Obtuse Street Elbow 60482828 28mm Pressfit Obtuse Street Elbow 60483535 35mm Pressfit Obtuse Street Elbow 60484242 42mm Pressfit Obtuse Street Elbow 60485454 54mm Pressfit Obtuse Street Elbow 60132215 22 x 15mm Pressfit Fitting Reducing 60132815 28 x 15mm Pressfit Fitting Reducing 60132822 28 x 22mm Pressfit Fitting Reducing 60133515 35mm x 15mm Pressfit Fitting Reducing 60133522 35 x 22mm Pressfit Fitting Reducing 60133528 35 x 28mm Pressfit Fitting Reducing 60134215 42 x 15mm Pressfit Fitting Reducing 60134222 42 x 22mm Pressfit Fitting Reducing 60134228 42 x 28mm Pressfit Fitting Reducing 60134235 42 x 35mm Pressfit Fitting Reducing 60135415 54 x 15mm Pressfit Fitting Reducing 60135422 54 x 22mm Pressfit Fitting Reducing 60135428 54 x 28mm Pressfit Fitting Reducing 60135435 54 x 35mm Pressfit Fitting Reducing 60135442 54 x 42mm Pressfit Fitting Reducing 60151515 15x15x15 mm Pressfit Equal Tee 60222222 22x22x22 mm Pressfit Equal Tee 60282828 28x28x28 mm Pressfit Equal Tee 60353535 35x35x35 mm Pressfit Equal Tee 60424242 42x42x42 mm Pressfit Equal Tee 60545454 54x54x54 mm Pressfit Equal Tee 60222215 22x22x15 mm Pressfit Reducing Tee 60282815 28x28x15 mm Pressfit Reducing Tee 60282822 28x28x22 mm Pressfit Reducing Tee 60353515 35x35x15 mm Pressfit Reducing Tee 60353522 35x35x22 mm Pressfit Reducing Tee 60353528 35x35x28 mm Pressfit Reducing Tee 60424215 42x42x15 mm Pressfit Reducing Tee 60424222 42x42x22 mm Pressfit Reducing Tee 60424228 42x42x28 mm Pressfit Reducing Tee 60424235 42x42x35 mm Pressfit Reducing Tee 60545415 54x54x15 mm Pressfit Reducing Tee 60545422 54x54x22 mm Pressfit Reducing Tee 60545428 54x54x28 mm Pressfit Reducing Tee 60545435 54x54x35 mm Pressfit Reducing Tee 60545442 54x54x42 mm Pressfit Reducing Tee 60221522 22x15x22 mm Pressfit Reducing Tee 60221515 22x15x15 mm Pressfit Reducing Tee 60282222 28x22x22 mm Pressfit Reducing Tee 60282228 28x22x28 mm Pressfit Reducing Tee 60151522 15x15x22 mm Pressfit Reducing Tee 60811515 15mm Pressfit End Cap 60812222 22mm Pressfit End Cap 60812828 28mm Pressfit End Cap 60813535 35mm Pressfit End Cap 60814242 42mm Pressfit End Cap 60815454 54mm Pressfit End Cap 60112215 22 x 15mm Pressfit Reducing Coupler 60112815 28 x 15mm Pressfit Reducing Coupler 60112822 28 x 22mm Pressfit Reducing Coupler 60113515 35 x 15mm Pressfit Reducing Coupler 60113522 35 x 22mm Pressfit Reducing Coupler 60113528 35 x 28mm Pressfit Reducing Coupler 60114215 42 x 15mm Pressfit Reducing Coupler 60114222 42 x 22mm Pressfit Reducing Coupler 60114228 42 x 28mm Pressfit Reducing Coupler 60114235 42 x 35mm Pressfit Reducing Coupler 60115415 54 x 15mm Pressfit Reducing Coupler 60115422 55 x 22mm Pressfit Reducing Coupler 60115428 56 x 28mm Pressfit Reducing Coupler 60115435 54 x 35mm Pressfit Reducing Coupler 60115442 54 x 42mm Pressfit Reducing Coupler 60291515 15MM Pressfit Full Crossover 60292222 22MM Pressfit Full Crossover 60271515 15MM Pressfit Part Crossover 60272222 22MM Pressfit Part Crossover 60422215 22mm x 15mm Pressfit Reducing Elbow 60422815 28 x 15mm Pressfit Reducing Elbow 60422822 28mm x 22mm Pressfit Reducing Elbow
Approval Holder:
PressFit Direct Ltd.
Company Name
PressFit Direct Ltd.
Address
10 Aylesbury Court Lapworth
Postcode
B94 6BE

View All Listings by this Company

Print This Approval

#2303394

Range of fohn stainless steel (SUS304/316L) crimp fittings incorporating EPDM ‘O’-rings. For use with FOHN stainless steel pipes (SUS304/316L). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2303394
Size:
see model
Marking:
FOHN (brand of KONTUR EESTI OÜ), size & material on pipe and fitting body.
Installation Requirements:
R001
Expiry date:
31/03/2028
Model:
Male threaded coupler S15х1/2"W – 15 x 15mm S15х3/4"W – 15 x 15mm S18х1/2"W – 18 x 18mm S18х3/4"W – 18 x 18mm S22х1/2"W – 22 x 22mm S22х3/4"W – 22 x 22mm S22х1"W – 22 x 22mm S28х3/4"W – 28 x 28mm S28x1"W – 28 x 28mm S35x1"W – 35 x 35mm S35x1 1/4"W – 35 x 35mm S42х1 1/2"W – 42 x 42mm S54х2"W – 54 x 54mm Male threaded coupler with straight pipe 15х1/2"W – 15 x 15mm 15x3/4"W – 15 x 15mm 18х1/2"W – 18 x 18mm 18х3/4"W – 18 x 18mm 18x1"W – 18 x 18mm 22х1/2"W – 22 x 22mm 22х3/4"W – 22 x 22mm 22x1"W – 22 x 22mm 28х3/4"W – 28 x 28MM 28х1"W – 28 x 28mm 35х1 1/4"W – 35 x 35mm 42х1 1/2"W – 42 x 42mm 54х2"W – 54 x 54mm Female threaded coupler S15х1/2"N – 15 x 15mm S18х1/2"N – 18 x 18mm S18х3/4"N – 18 x 18mm S22х1/2"N – 22 x 22mm S22х3/4"N – 22 x 22mm S28х3/4"N – 28 x 28mm S28х1"N – 28 x 28mm S35x1"N – 35 x 35mm S35x1 1/4"N – 35 x 35mm S42х1 1/2"N – 42 x 42mm S54х2"N – 54 x 54mm Female threaded coupler with straight pipe 15х1/2"N – 15 x 15mm 15x3/4"N – 15 x 15mm 18х1/2"N – 18 x 18mm 18х3/4"N – 18 x 18mm 18x1"N – 18 x 18mm 22х1/2"N – 22 x 22mm 22х3/4"N – 22 x 22mm 22x1"N – 22 x 22mm 28х3/4"N – 28 x 28mm 28х1"N – 28 x 28mm 35х1 1/4"N – 35 x 35mm 42х1 1/2"N – 42 x 42mm 54х2"N – 54 x 54mm Coupler S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S15 – 15 x 15mm S18х15 – 18 x 18mm S18 – 18 x 18mm S22х18 – 22 x 22mm S22х15 – 22 x 22mm S22 – 22 x 22mm S28х15 – 28 x 28mm S28х22 – 28 x 28mm S28 – 28 x 28mm S35х28 – 35 x 35mm S35 – 35 x 35mm S42х35 – 42 x 42mm S42 – 42 x 42mm S54х42 – 54 x 54mm S54 – 54 x 54mm Coupler with straight pipe S18х15Ⅱ – 15 x 15mm S22х15Ⅱ – 15 x 15mm S22х18Ⅱ – 18 x 18mm S28х15Ⅱ – 15 x 15mm S28х18Ⅱ – 18 x 18mm S28х22Ⅱ – 22 x 22mm S35х15Ⅱ – 15 x 15mm S35х18Ⅱ – 18 x 18mm S35х22Ⅱ – 22 x 22mm S35х28Ⅱ – 28 x 28mm S42х22Ⅱ – 22 x 22mm S42х28Ⅱ – 28 x 28mm S42х35Ⅱ – 35 x 35mm S54х28Ⅱ – 28 x 28mm S54х35Ⅱ – 35 x 35mm S54х42Ⅱ – 42 x 42mm Adjustable connector S15Ⅱ – 15 x 15mm S18Ⅱ – 18 x 18mm S22Ⅱ – 22 x 22mm S28Ⅱ – 28 x 28mm S35Ⅱ – 35 x 35mm S42Ⅱ – 42 x 42mm S54Ⅱ – 54 x 54mm Union H15х1/2" – 15 x 15mm H15х3/4" – 15 x 15mm H18х1/2" – 18 x 18mm H18х3/4" – 18 x 18mm H22х1/2" – 22 x 22mm H22х3/4" – 22 x 22mm H28х3/4" – 28 x 28mm H28х1" – 28 x 28mm H35x1" – 35 x 35mm H35x1 1/4" – 35 x 35mm H42х1 1/2" – 42 x 42mm H54х2" – 54 x 54mm Tee T15 – 15 x 15mm T18х15х18 – 18 x 18mm T18 – 18 x 18mm T22х18х22 – 22 x 22mm T22х15х22 – 22 x 22mm T22 – 22 x 22mm T28x15x28 – 28 x 28mm T28х22х22 – 28 x 28mm T28x22x28 – 28 x 28mm T28 – 28 x 28mm T35x15x35 – 35 x 35mm T35x22x35 – 35 x 35mm T35x28x35 – 35 x 35mm T35 – 35 x 35mm T42х35х42 – 42 x 42mm T42 – 42 x 42mm T54х42х54 – 54 x 54mm T54 – 54 x 54mm Female threaded Tee T15х1/2"Nx15 – 15 x 15mm T18х1/2"Nx18 – 18 x 18mm T18х3/4"Nx18 – 18 x 18mm T22х1/2"Nx22 – 22 x 22mm T22х3/4"Nx22 – 22 x 22mm T28х1/2"Nx28 – 28 x 28mm T28х3/4"Nx28 – 28 x 28mm T28х1"Nx28 – 28 x 28mm T35х1"Nx35 – 35 x 35mm T35х1 1/4"Nx35 – 35 x 35mm T42х1 1/2"Nх42 – 42 x 42mm T54х2"Nх54 – 54 x 54mm Male threaded Tee T15х1/2"Wx15 – 15 x 15mm T18х1/2"Wx18 – 18 x 18mm T18х3/4"Wx18 – 18 x 18mm T22х1/2"Wx22 – 22 x 22mm T22х3/4"Wx22 – 22 x 22mm T28х1/2"Wx28 – 28 x 28mm T28х3/4"Wx28 – 28 x 28mm T28х1"Wx28 – 28 x 28mm T35х1"Wx35 – 35 x 35mm T35х1 1/4"Wx35 – 35 x 35mm T42х1 1/2"Wх42 – 35 x 35mm T54х2"Wх54 – 54 x 54mm 90°B Elbow L15a – 15 x 15mm L18а – 18 x 18mm L22a – 22 x 22mm L28a – 28 x 28mm L35a – 35 x 35mm L42а – 42 x 42mm L54а – 54 x 54mm 90°A Elbow L15 – 15 x 15mm L18 – 18 x 18mm L22 – 22 x 22mm L28 – 28 x 28mm L35 – 35 x 35mm L42 – 42 x 42mm L54 – 54 x 54mm Female threaded elbow L15х1/2"N – 15 x 15mm L18х1/2"N – 18 x 18mm L18х3/4"N – 18 x 18mm L22х1/2"N – 22 x 22mm L22х3/4"N – 22 x 22mm L28х3/4"N – 28 x 28mm L35х1"N – 35 x 35mm Male threaded elbow L15x1/2"W – 15 x 15mm L18х1/2"W – 18 x 18mm L18х3/4"W – 15 x 15mm L22x1/2"W – 22 x 22mm L22x3/4"W – 22 x 22mm L28x3/4"W – 28 x 28mm L35x1"W – 35 x 35mm Female threaded elbow with base L15х1/2"N(a) – 15 x 15mm L18х1/2"N(a) – 18 x 18mm L22х1/2"N(a) – 22 x 22mm L22х3/4"N(a) – 22 x 22mm 45°B Elbow 45°L15a – 15 x 15mm 45°L18а – 18 x 18mm 45°L22a – 22 x 22mm 45°L28a – 28 x 28mm 45°L35a – 35 x 35mm 45°L42а – 42 x 42mm 45°L54а – 54 x 54mm 45°A Elbow 45°L15 – 15 x 15mm 45°L18 – 18 x 18mm 45°L22 – 22 x 22mm 45°L28 – 28 x 28mm 45°L35 – 35 x 35mm 45°L42 – 42 x 42mm 45°L54 – 54 x 54mm One end pipe bridge Ω15a – 15 x 15mm Ω18a – 18 x 18mm Ω22a – 22 x 22mm Pipe Bridge Ω15 – 15 x 15mm Ω18 – 18 x 18mm Ω22 – 22 x 22mm Ω28 – 28 x 28mm Cap D15 – 15 x 15mm D18 – 18 x 18mm D22 – 22 x 22mm D28 – 28 x 28mm D35 – 35 x 35mm D42 – 42 x 42mm D54 – 54 x 54mm Pipe Mingshi Stainless Steel Pipe (To EN 10312) 15mm to 54mm
Approval Holder:
KONTUR EESTI OÜ
Company Name
KONTUR EESTI OÜ
Address
Türi tn 10d, Tallinn, 11313, Harju maakond
Country
Estonia

View All Listings by this Company

Print This Approval

#240404066

Range of press copper crimp fittings with EPDM ‘O’-rings for use with copper tube manufactured to EN 1057. The joints are achieved by means of a crimping tool. For above ground use. Maximum working pressure: 16.0 bar. Maximum operating temperature: 85°C

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240404066
Size:
see models
Marking:
MB (Brand of Navigator) & Size on body
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
PFWC-15 to PFWC-76 Press Fit Water Coupling 15mm 22mm 28mm 35mm 42mm 54mm 66.7mm 76.1mm PFWCS-15 to PFWCS-54 Press Fit Slip Coupling 15mm 22mm 28mm 35mm 42mm 54mm PFWRC-2215 to PFWRC-5442 Press Fit Reducing Coupler 22mm x 15mm 28mm x 15mm 28mm x 22mm 35mm x 15mm 35mm x 22mm 35mm x 28mm 42mm x 15mm 42mm x 22mm 42mm x 28mm 42mm x 35mm 54mm x 15mm 54mm x 22mm 54mm x 28mm 54mm x 35mm 54mm x 42mm PFWFR-2215 to PFWFR-7667 Press Fit Fittings Reducer 22mm x 15mm 28mm x 15mm 28mm x 22mm 35mm x 15mm 35mm x 22mm 35mm x 28mm 42mm x 15mm 42mm x 22mm 42mm x 28mm 42mm x 35mm 54mm x 15mm 54mm x 22mm 54mm x 28mm 54mm x 35mm 54mm x 42mm 66.7mm x 28mm 66.7mm x 35mm 66.7mm x 42mm 66.7mm x 54mm 76.1mm x 35mm 76.1mm x 42mm 76.1mm x 54mm 76.1mm x 66.7mm PFWE-15 to PFWE-76 Press Fit 90 Degree Elbow 15mm 22mm 28mm 35mm 42mm 54mm 66.7mm 76.1mm PFWES-15 to PFWES-76 Press Fit 90 Degree Street Elbow 15mm 22mm 28mm 35mm 42mm 54mm 66.7mm 76.1mm PFWE/45-15 to PFWE/45-76 Press Fit 45 Degree Elbow 15mm 22mm 28mm 35mm 42mm 54mm 66.7mm 76.1mm PFWES/45-15 to PFWES/45-76 Press Fit 45 Degree Street Elbow 15mm 22mm 28mm 35mm 42mm 54mm 66.7mm 76.1mm PFWEC-15 to PFWEC-76 Press Fit End Cap 15mm 22mm 28mm 35mm 42mm 54mm 66.7mm 76.1mm PFWET-15 to PFWET-76 Press Fit Equal Tee 15mm 22mm 28mm 35mm 42mm 54mm 66.7mm 76.1mm PFWPCOFM-15 to PFWPCOFM-22 Press Fit Partial Cross Over Female x Male 15mm 22mm PFWFCOFF-15 to PFWFCOFF-22 Press Fit Cross Over Female x Female 15mm 22mm PFWRT-221515 to PFWRT-767667 Press Fit Reducing Tee 22mm x 15mm x 15mm 22mm x 22mm x 15mm 28mm x 22mm x 22mm 28mm x 28mm x 22mm 28mm x 15mm x 22mm 28mm x 28mm x 15mm 35mm x 22mm x 22mm 35mm x 35mm x 22mm 35mm x 35mm x 28mm 42mm x 35mm x 35mm 15mm x 22mm x 15mm 22mm x 28mm x 22mm 22mm x 15mm x 22mm 28mm x 15mm x 28mm 28mm x 22mm x 28mm 35mm x 15mm x 35mm 35mm x 22mm x 35mm 35mm x 28mm x 35mm 42mm x 15mm x 42mm 42mm x 22mm x 42mm 42mm x 28mm x 42mm 42mm x 35mm x 42mm 54mm x 15mm x 54mm 54mm x 22mm x 54mm 54mm x 28mm x 54mm 54mm x 35mm x 54mm 54mm x 42mm x 54mm 66.7mm x 28mm x 66.7mm 66.7mm x 35mm x 66.7mm 66.7mm x 42mm x 66.7mm 66.7mm x 54mm x 66.7mm 76.1mm x 22mm x 76.1mm 76.1mm x 28mm x 76.1mm 76.1mm x 35mm x 76.1mm 76.1mm x 42mm x 76.1mm 76.1mm x 54mm x 76.1mm 76.1mm x 66.7mm x 76.1mm
Approval Holder:
Navigator MSL Ltd.
Company Name
Navigator MSL Ltd.
Address
Mill Road, Sharnbrook, Beds.
Postcode
MK44 1NP
Phone
01234 781234
General Email
sales@navigatormsl.com

View All Listings by this Company

Print This Approval

#240906001

Range of “JRG Sanipex MT” compression fittings with EPDM ‘O’-rings for use with “JRG Sanipex MT ECO” multilayer pipes (PE-RT II/Al/PE-RT II). Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240906001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
16x2,2 mm; 20x2,5 mm; 26x3,0 mm; 32x3,0 mm; 40x3,5 mm; 50x4,0 mm and 63x4,5 mm.
Marking:
Compression fittings: Size, -JRG-, date of manufacture (date stamp) on body. Pipes: Size, +GF+ JRG Sanipex MT ECO, date of manufacture and time (YYYYMMDDHHMMSS), batch & pipe manufacturer (XX) on pipe. XX: AB = Gerodur MPM Kunststoffverarbeitung GmbH & Co. KG. Models/supplier added December 2024 AA = HakaGerodur AG
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
4600.716 Sanipex MT ECO Pipe bars d16x2.25/5m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 16 mm 4600.720 Sanipex MT ECO Pipe bars d20x2.5/5m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 20 mm 4600.726 Sanipex MT ECO Pipe bars d26x3.0/5m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 26 mm 4600.732 Sanipex MT ECO Pipe bars d32x3.0/5m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 32 mm 4600.740 Sanipex MT ECO Pipe bars d40x3.5/5m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 40 mm 4600.750 Sanipex MT ECO Pipe bars d50x4.0/5m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 50 mm 4600.763 Sanipex MT ECO Pipe bars d63x4.5/5m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 63 mm 4602.716 Sanipex MT ECO Pipe in pipe d16x2.25/50m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 16 mm 4602.720 Sanipex MT ECO Pipe in pipe d20x2.5/50m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 20 mm 4604.716 Sanipex MT ECO Pipe in coils d16x2.2 Multilayer metal pipe (PE-RT II/Al/PE-RT II) 16 mm 4604.720 Sanipex MT ECO Pipe in coils d20x2.5/50m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 20 mm 4606.816 Sanipex MT ECO Pipe iso. d16x2.2/50m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 16 mm 4606.820 Sanipex MT ECO Pipe iso. d20x2.5/50m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 20 mm 4606.826 Sanipex MT ECO Pipe iso. d26x3/50m Multilayer metal pipe (PE-RT II/Al/PE-RT II) 26 mm 4610.135 Sanipex MT Fitting con. sing. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4610.137 Sanipex MT Fitting con. sing. ic. d16 Compression Fitting "Sanipex MT" 16 4610.150 Sanipex MT Fitting con. sing. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4610.180 Sanipex MT Fitting con. sing. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4610.195 Sanipex MT Fitting con. sing. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4610.235 Sanipex MT Fitting con. sing. d20x1/2" Compression Fitting "Sanipex MT" 20x1/2 4610.237 Sanipex MT Fitting con. sing. ic. d20 Compression Fitting "Sanipex MT" 20 10 70 4610.350 Sanipex MT Fitting con. sing. d20x3/4" Compression Fitting "Sanipex MT" 20x3/4 4610.357 Sanipex MT Fitting con. sing. ic. d20 Compression Fitting "Sanipex MT" 20 4610.450 Sanipex MT Fitting con. sing. d26x3/4" Compression Fitting "Sanipex MT" 26x3/4 4611.150 Sanipex MT Fitting con. doub. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4611.160 Sanipex MT Fitting con. doub. red. d20 Compression Fitting "Sanipex MT" 20 4611.170 Sanipex MT Fitting con. doub. d20x1/2" Compression Fitting "Sanipex MT" 20x1/2 4611.180 Sanipex MT Fitting con. doub. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 1 4611.250 Sanipex MT Fitting con. doub. d26x1/2" Compression Fitting "Sanipex MT" 26x1/2 4613.100 Sanipex MT Fitting con. doub. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4613.200 Sanipex MT Fitting con. doub. d20x1/2" Compression Fitting "Sanipex MT" 20x1/2 4615.100 Sanipex MT Bend 90° f. conc. cist. d16 Compression Fitting "Sanipex MT" 16 4615.116 Sanipex MT Elbow 90° w. push nipple d16 Compression Fitting "Sanipex MT" 16 4616.100 Sanipex MT Tee f. conc. cist. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4616.116 Sanipex MT Tee w. push nipple d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4620.125 Sanipex MT Wall penetr. sing. d16 25mm Compression Fitting "Sanipex MT" 16 25mm 4620.140 Sanipex MT Wall penetr. sing. d16 40mm Compression Fitting "Sanipex MT" 16 40mm 4620.155 Sanipex MT Wall penetr. sing. d16 55mm Compression Fitting "Sanipex MT" 16 55mm 4620.165 Sanipex MT Wall penetr. sing. d16 65mm Compression Fitting "Sanipex MT" 16 65mm 4621.125 Sanipex MT Wall penetr. 90° doub. d16 Compression Fitting "Sanipex MT" 16 4625.150 Sanipex MT Conc. fitting con. doub. 1/2" Compression Fitting "Sanipex MT" 4625.170 Sanipex MT Conc. fitting con. doub. 1/2" Compression Fitting "Sanipex MT" 4630.100 Sanipex MT Box 90° sing. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4630.107 Sanipex MT Box 90° sing. ic. d16 Compression Fitting "Sanipex MT" 16 4630.180 Sanipex MT Box 90° sing. w. l. thrd. d16 Compression Fitting "Sanipex MT" 16 4630.200 Sanipex MT Box 90° sing. d20x1/2" Compression Fitting "Sanipex MT" 20x1/2 4630.207 Sanipex MT Box 90° sing. ic. d20 Compression Fitting "Sanipex MT" 20 4630.300 Sanipex MT Box 90° sing. d20x3/4" Compression Fitting "Sanipex MT" 20x3/4 4632.100 Sanipex MT Box 90° f. conc. cist. d16 Compression Fitting "Sanipex MT" 16 4634.100 Sanipex MT Box 90° doub. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4634.200 Sanipex MT Box 90° doub. red. d20xd16 Compression Fitting "Sanipex MT" 20x16 4634.300 Sanipex MT Box 90° doub. d20x1/2" Compression Fitting "Sanipex MT" 20x1/2 4650.016 Sanipex MT Tee d16 Compression Fitting "Sanipex MT" 16 4650.020 Sanipex MT Tee d20 Compression Fitting "Sanipex MT" 20 4650.026 Sanipex MT Tee d26 Compression Fitting "Sanipex MT" 26 4650.032 Sanipex MT Tee d32 Compression Fitting "Sanipex MT" 32 4650.040 Sanipex MT Tee d40 Compression Fitting "Sanipex MT" 40 4650.050 Sanipex MT Tee d50 Compression Fitting "Sanipex MT" 50 4650.063 Sanipex MT Tee d63 Compression Fitting "Sanipex MT" 63 4650.416 Sanipex MT Insul. sh. Tee d16 Compression Fitting "Sanipex MT" 16 4650.420 Sanipex MT Insul. sh. Tee d20 Compression Fitting "Sanipex MT" 20 4650.426 Sanipex MT Insul. sh. Tee d26 Compression Fitting "Sanipex MT" 26 4650.516 Sanipex MT Insul. sh. Tee d16 Compression Fitting "Sanipex MT" 16 4650.520 Sanipex MT Insul. sh. Tee d20 Compression Fitting "Sanipex MT" 20 4650.526 Sanipex MT Insul. sh. Tee d26 Compression Fitting "Sanipex MT" 26 4650.532 Sanipex MT Insul. sh. Tee d32 Compression Fitting "Sanipex MT" 32 4650.540 Sanipex MT Insul. sh. Tee d40 Compression Fitting "Sanipex MT" 40 4650.550 Sanipex MT Insul. sh. Tee d50 Compression Fitting "Sanipex MT" 50 4650.563 Sanipex MT Insul. sh. Tee d63 Compression Fitting "Sanipex MT" 63 4652.110 Sanipex MT Tee red. d20xd16xd16 Compression Fitting "Sanipex MT" 20x16x16 4652.112 Sanipex MT Tee red. d20xd16xd20 Compression Fitting "Sanipex MT" 20x16x20 4652.114 Sanipex MT Tee red. d20xd20xd16 Compression Fitting "Sanipex MT" 20x20x16 4652.214 Sanipex MT Tee red. d26xd16xd26 Compression Fitting "Sanipex MT" 26x16x26 4652.218 Sanipex MT Tee red. d26xd20xd20 Compression Fitting "Sanipex MT" 26x20x20 4652.220 Sanipex MT Tee red. d26xd20xd26 Compression Fitting "Sanipex MT" 26x20x26 4652.222 Sanipex MT Tee red. d26xd26xd20 Compression Fitting "Sanipex MT" 26x26x20 4652.316 Sanipex MT Tee red. d32xd16xd32 Compression Fitting "Sanipex MT" 32x16x32 4652.324 Sanipex MT Tee red. d32xd20xd32 Compression Fitting "Sanipex MT" 32x20x32 4652.330 Sanipex MT Tee red. d32xd26xd26 Compression Fitting "Sanipex MT" 32x26x26 4652.332 Sanipex MT Tee red. d32xd26xd32 Compression Fitting "Sanipex MT" 32x26x32 4652.426 Sanipex MT Tee red. d40xd26xd32 Compression Fitting "Sanipex MT" 40x26x32 4652.428 Sanipex MT Tee red. d40xd26xd40 Compression Fitting "Sanipex MT" 40x26x40 4652.436 Sanipex MT Tee red. d40xd32xd32 Compression Fitting "Sanipex MT" 40x32x32 4652.438 Sanipex MT Tee red. d40xd32xd40 Compression Fitting "Sanipex MT" 40x32x40 4652.530 Sanipex MT Tee red. d50xd26xd50 Compression Fitting "Sanipex MT" 50x26x50 4652.534 Sanipex MT Tee red. d50xd32xd50 Compression Fitting "Sanipex MT" 50x32x50 4652.544 Sanipex MT Tee red. d50xd40xd40 Compression Fitting "Sanipex MT" 50x40x40 4652.546 Sanipex MT Tee red. d50xd40xd50 Compression Fitting "Sanipex MT" 50x40x50 4652.634 Sanipex MT Tee red. d63xd26xd63 Compression Fitting "Sanipex MT" 63x26x63 4652.638 Sanipex MT Tee red. d63xd32xd63 Compression Fitting "Sanipex MT" 63x32x63 4652.642 Sanipex MT Tee red. d63xd40xd63 Compression Fitting "Sanipex MT" 63x40x63 4652.656 Sanipex MT Tee red. d63xd50xd63 Compression Fitting "Sanipex MT" 63x50x63 4654.110 Sanipex MT Tee w. fem. thrd. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4654.117 Sanipex MT Tee w. fem. thrd. ic. d16 Compression Fitting "Sanipex MT" 16 4654.210 Sanipex MT Tee w. fem. thrd. d20x1/2" Compression Fitting "Sanipex MT" 20x1/2 4654.217 Sanipex MT Tee w. fem. thrd. ic. d20 Compression Fitting "Sanipex MT" 20 4654.220 Sanipex MT Tee w. fem. thrd. d26x1/2" Compression Fitting "Sanipex MT" 26x1/2 4654.227 Sanipex MT Tee w. fem. thrd. ic. d26 Compression Fitting "Sanipex MT" 26 10 70 4654.250 Sanipex MT Tee w. fem. thrd. d26x3/4" Compression Fitting "Sanipex MT" 26x3/4 4654.257 Sanipex MT Tee w. fem. thrd. ic. d26 Compression Fitting "Sanipex MT" 26 4654.290 Sanipex MT Tee w. fem. thrd. d32x1/2" Compression Fitting "Sanipex MT" 32x1/2 4654.310 Sanipex MT Tee w. fem. thrd. d32x3/4" Compression Fitting "Sanipex MT" 32x3/4 4654.317 Sanipex MT Tee w. fem. thrd. ic. d32 Compression Fitting "Sanipex MT" 32 4655.100 Sanipex MT Tee w. male thrd. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4655.200 Sanipex MT Tee w. male thrd. d16x3/4" Compression Fitting "Sanipex MT" 16x3/4 4655.220 Sanipex MT Tee w. male thrd. d20x3/4" Compression Fitting "Sanipex MT" 20x3/4 4657.250 Sanipex MT Tee w. male thrd. d26-1"-d26 Compression Fitting "Sanipex MT" 26-1-26 4657.310 Sanipex MT Tee w. male thrd. d32-1"-d32 Compression Fitting "Sanipex MT" 32-1 4664.016 Sanipex MT Cross-tee d16 Compression Fitting "Sanipex MT" 16 4664.018 Sanipex MT Cross-tee d20 Compression Fitting "Sanipex MT" 20 4664.020 Sanipex MT Cross-tee d20xd16xd20 Compression Fitting "Sanipex MT" 20x16x20 4664.022 Sanipex MT Cross-tee d20xd16xd16 Compression Fitting "Sanipex MT" 20x16x16 4665.100 Sanipex MT Conec. unit f. radiator d16 Compression Fitting "Sanipex MT" 16 4666.016 Sanipex MT Baseboard set d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4666.020 Sanipex MT Baseboard set d20x1/2" Compression Fitting "Sanipex MT" 20x1/2 4666.116 Sanipex MT Baseboard set red. d16x1/2" Compression Fitting "Sanipex MT" 16x1/2 4666.120 Sanipex MT Baseboard set red. d20x1/2" Compression Fitting "Sanipex MT" 20x1/2 4670.016 Sanipex MT Elbow 90° d16 Compression Fitting "Sanipex MT" 16 4670.020 Sanipex MT Elbow 90° d20 Compression Fitting "Sanipex MT" 20 4670.026 Sanipex MT Elbow 90° d26 Compression Fitting "Sanipex MT" 26 4670.032 Sanipex MT Elbow 90° d32 Compression Fitting "Sanipex MT" 32 4670.040 Sanipex MT Elbow 90° d40 Compression Fitting "Sanipex MT" 40 4670.050 Sanipex MT Elbow 90° d50 Compression Fitting "Sanipex MT" 50 4670.063 Sanipex MT Elbow 90° d63 Compression Fitting "Sanipex MT" 63 4670.216 Sanipex MT Bend 90° w. loose nut d16 Compression Fitting "Sanipex MT" 16 4670.220 Sanipex MT Bend 90° w. loose nut d20 Compression Fitting "Sanipex MT" 20 4670.226 Sanipex MT Bend 90° w. loose nut d26 Compression Fitting "Sanipex MT" 26 4670.232 Sanipex MT Bend 90° w. loose nut d32 Compression Fitting "Sanipex MT" 32 4670.240 Sanipex MT Bend 90° w. loose nut d40 Compression Fitting "Sanipex MT" 40 4670.250 Sanipex MT Bend 90° w. loose nut d50 Compression Fitting "Sanipex MT" 50 4670.263 Sanipex MT Bend 90° w. loose nut d63 Compression Fitting "Sanipex MT" 63 4670.416 Sanipex MT Insul. sh. elb. 90° d16 Compression Fitting "Sanipex MT" 16 4670.420 Sanipex MT Insul. sh. elb. 90° d20 Compression Fitting "Sanipex MT" 20 4670.426 Sanipex MT Insul. sh. elb. 90° d26 Compression Fitting "Sanipex MT" 26 4670.516 Sanipex MT Insul. sh. elb. 90° d16 Compression Fitting "Sanipex MT" 16 4670.520 Sanipex MT Insul. sh. elb. 90° d20 Compression Fitting "Sanipex MT" 20 4670.526 Sanipex MT Insul. sh. elb. 90° d26 Compression Fitting "Sanipex MT" 26 4670.532 Sanipex MT Insul. sh. elb. 90° d32 Compression Fitting "Sanipex MT" 32 4670.540 Sanipex MT Insul. sh. elb. 90° d40 Compression Fitting "Sanipex MT" 40 4670.550 Sanipex MT Insul. sh. elb. 90° d50 Compression Fitting "Sanipex MT" 50 4670.563 Sanipex MT Insul. sh. elb. 90° d63 Compression Fitting "Sanipex MT" 63 4671.100 Sanipex MT Bend 90° w. fem. thrd. d16 Compression Fitting "Sanipex MT" 16 4671.110 Sanipex MT Bend 90° w. fem. thrd. d16 Compression Fitting "Sanipex MT" 16 4671.210 Sanipex MT Bend 90° w. fem. thrd. d20 Compression Fitting "Sanipex MT" 20 4671.220 Sanipex MT Bend 90° w. fem. thrd. d20 Compression Fitting "Sanipex MT" 20 4671.250 Sanipex MT Bend 90° w. fem. thrd. d26 Compression Fitting "Sanipex MT" 26 4671.310 Sanipex MT Bend 90° w. fem. thrd. d32x1" Compression Fitting "Sanipex MT" 32x1 4671.410 Sanipex MT Bend 90° w. fem. thrd. d40 Compression Fitting "Sanipex MT" 40 4671.510 Sanipex MT Bend 90° w. fem. thrd. d50 Compression Fitting "Sanipex MT" 50 4671.610 Sanipex MT Bend 90° w. fem. thrd. d63x2" Compression Fitting "Sanipex MT" 63x2 4672.110 Sanipex MT Bend 90° w. male thrd. d16 Compression Fitting "Sanipex MT" 16 4672.120 Sanipex MT Bend 90° w. male thrd. d16 Compression Fitting "Sanipex MT" 16 4672.210 Sanipex MT Bend 90° w. male thrd. d20 Compression Fitting "Sanipex MT" 20 4672.220 Sanipex MT Bend 90° w. male thrd. d20 Compression Fitting "Sanipex MT" 20 4672.250 Sanipex MT Bend 90° w. male thrd. d26 Compression Fitting "Sanipex MT" 26 4672.310 Sanipex MT Bend 90° w. male thrd. d32x1" Compression Fitting "Sanipex MT" 32x1 4672.410 Sanipex MT Bend 90° w. male thrd. d40 Compression Fitting "Sanipex MT" 40 4672.510 Sanipex MT Bend 90° w. male thrd. d50 Compression Fitting "Sanipex MT" 50 4673.098 Sanipex MT Tra Elbow90 d16x12mm Compression Fitting "Sanipex MT" 16x12 4673.100 Sanipex MT Tra Elbow90 d16x15mm Compression Fitting "Sanipex MT" 16x15 4674.016 Sanipex MT Adapter 90° w. loose nut d16 Compression Fitting "Sanipex MT" 16 4676.020 Sanipex MT Elbow 45° d20 Compression Fitting "Sanipex MT" 20 4676.026 Sanipex MT Elbow 45° d26 Compression Fitting "Sanipex MT" 26 4676.032 Sanipex MT Elbow 45° d32 Compression Fitting "Sanipex MT" 32 4676.040 Sanipex MT Elbow 45° d40 Compression Fitting "Sanipex MT" 40 4676.050 Sanipex MT Elbow 45° d50 Compression Fitting "Sanipex MT" 50 4676.063 Sanipex MT Elbow 45° d63 Compression Fitting "Sanipex MT" 63 4676.226 Sanipex MT Bend 45° w. loose nut d26 Compression Fitting "Sanipex MT" 26 4676.232 Sanipex MT Bend 45° w. loose nut d32 Compression Fitting "Sanipex MT" 32 4676.240 Sanipex MT Bend 45° w. loose nut d40 Compression Fitting "Sanipex MT" 40 4676.250 Sanipex MT Bend 45° w. loose nut d50 Compression Fitting "Sanipex MT" 50 4676.263 Sanipex MT Bend 45° w. loose nut d63 Compression Fitting "Sanipex MT" 63 4676.520 Sanipex MT Insul. sh. elb. 45° d20 Compression Fitting "Sanipex MT" 20 4676.526 Sanipex MT Insul. sh. elb. 45° d26 Compression Fitting "Sanipex MT" 26 4676.532 Sanipex MT Insul. sh. elb. 45° d32 Compression Fitting "Sanipex MT" 32 4676.540 Sanipex MT Insul. sh. elb. 45° d40 Compression Fitting "Sanipex MT" 40 4676.550 Sanipex MT Insul. sh. elb. 45° d50 Compression Fitting "Sanipex MT" 50 4676.563 Sanipex MT Insul. sh. elb. 45° d63 Compression Fitting "Sanipex MT" 63 4677.250 Sanipex MT Bend 45° w. fem. thrd. d26 Compression Fitting "Sanipex MT" 26 4677.310 Sanipex MT Bend 45° w. fem. thrd. d32x1" Compression Fitting "Sanipex MT" 32x1 4677.410 Sanipex MT Bend 45° w. fem. thrd. d40 Compression Fitting "Sanipex MT" 40 4677.510 Sanipex MT Bend 45° w. fem. thrd. d50 Compression Fitting "Sanipex MT" 50 4677.610 Sanipex MT Bend 45° w. fem. thrd. d63x2" Compression Fitting "Sanipex MT" 63x2 4690.016 Sanipex MT Coupler d16 Compression Fitting "Sanipex MT" 16 4690.020 Sanipex MT Coupler d20 Compression Fitting "Sanipex MT" 20 4690.026 Sanipex MT Coupler d26 Compression Fitting "Sanipex MT" 26 4690.032 Sanipex MT Coupler d32 Compression Fitting "Sanipex MT" 32 4690.040 Sanipex MT Coupler d40 Compression Fitting "Sanipex MT" 40 4690.050 Sanipex MT Coupler d50 Compression Fitting "Sanipex MT" 50 4690.063 Sanipex MT Coupler d63 Compression Fitting "Sanipex MT" 63 4690.516 Sanipex MT Insul. sh. coupl. d16 Compression Fitting "Sanipex MT" 16 4690.520 Sanipex MT Insul. sh. coupl. d20 Compression Fitting "Sanipex MT" 20 4690.526 Sanipex MT Insul. sh. coupl. d26 Compression Fitting "Sanipex MT" 26 4690.532 Sanipex MT Insul. sh. coupl. d32 Compression Fitting "Sanipex MT" 32 4690.540 Sanipex MT Insul. sh. coupl. d40 Compression Fitting "Sanipex MT" 40 4690.550 Sanipex MT Insul. sh. coupl. d50 Compression Fitting "Sanipex MT" 50 4690.563 Sanipex MT Insul. sh. coupl. d63 Compression Fitting "Sanipex MT" 63 4692.016 Sanipex MT Doub. union d16 Compression Fitting "Sanipex MT" 16 4692.020 Sanipex MT Doub. union d20 Compression Fitting "Sanipex MT" 20 4692.026 Sanipex MT Doub. union d26 Compression Fitting "Sanipex MT" 26 4692.032 Sanipex MT Doub. union d32 Compression Fitting "Sanipex MT" 32 4692.040 Sanipex MT Doub. union d40 Compression Fitting "Sanipex MT" 40 4692.050 Sanipex MT Doub. union d50 Compression Fitting "Sanipex MT" 50 4692.063 Sanipex MT Doub. union d63 Compression Fitting "Sanipex MT" 63 4695.016 Sanipex MT Cap d16 Compression Fitting "Sanipex MT" 16 4695.020 Sanipex MT Cap d20 Compression Fitting "Sanipex MT" 20 4695.026 Sanipex MT Cap d26 Compression Fitting "Sanipex MT" 26 4695.032 Sanipex MT Cap d32 Compression Fitting "Sanipex MT" 32 4695.040 Sanipex MT Cap d40 Compression Fitting "Sanipex MT" 40 4695.050 Sanipex MT Cap d50 Compression Fitting "Sanipex MT" 50 4695.063 Sanipex MT Cap d63 Compression Fitting "Sanipex MT" 63 4696.210 Sanipex MT Insert w. male thrd. d20x1/2" Compression Fitting "Sanipex MT" 20x1/2 4696.215 Sanipex MT Insert w. male thrd. d26x1/2" Compression Fitting "Sanipex MT" 26x1/2 4696.220 Sanipex MT Insert w. male thrd. d26x3/4" Compression Fitting "Sanipex MT" 26x3/4 4696.315 Sanipex MT Insert w. male thrd. d32x1/2" Compression Fitting "Sanipex MT" 32x1/2 4696.320 Sanipex MT Insert w. male thrd. d32x3/4" Compression Fitting "Sanipex MT" 32x3/4 4696.415 Sanipex MT Insert w. male thrd. d40x1/2" Compression Fitting "Sanipex MT" 40x1/2 4696.420 Sanipex MT Insert w. male thrd. d40x3/4" Compression Fitting "Sanipex MT" 40x3/4 4696.425 Sanipex MT Insert w. male thrd. d40x1" Compression Fitting "Sanipex MT" 40x1 4697.210 Sanipex MT Insert w. fem. thrd. d26x3/8" Compression Fitting "Sanipex MT" 26x3/8 4697.215 Sanipex MT Insert w. fem. thrd. d26 Compression Fitting "Sanipex MT" 26 4697.315 Sanipex MT Insert w. fem. thrd. d32x1/2" Compression Fitting "Sanipex MT" 32x1/2 4697.415 Sanipex MT Insert w. fem. thrd. d40x1/2" Compression Fitting "Sanipex MT" 40x1/2 4697.420 Sanipex MT Insert w. fem. thrd. d40x3/4" Compression Fitting "Sanipex MT" 40x3/4 4710.110 Sanipex MT Adapter w. male thrd. d16 Compression Fitting "Sanipex MT" 16 4710.115 Sanipex MT Adapter w. male thrd. np. d16 Compression Fitting "Sanipex MT" 16 4710.117 Sanipex MT Adapter w. male thrd. ic. d16 Compression Fitting "Sanipex MT" 16 4710.150 Sanipex MT Adapter w. male thrd. d16 Compression Fitting "Sanipex MT" 16 4710.210 Sanipex MT Adapter w. male thrd. d20 Compression Fitting "Sanipex MT" 20 4710.215 Sanipex MT Adapter w. male thrd. np. d20 Compression Fitting "Sanipex MT" 20 4710.217 Sanipex MT Adapter w. male thrd. ic. d20 Compression Fitting "Sanipex MT" 20 4710.220 Sanipex MT Adapter w. male thrd. d20 Compression Fitting "Sanipex MT" 20 4710.225 Sanipex MT Adapter w. male thrd. np. d20 Compression Fitting "Sanipex MT" 20 4710.227 Sanipex MT Adapter w. male thrd. ic. d20 Compression Fitting "Sanipex MT" 20 4710.250 Sanipex MT Adapter w. male thrd. d26 Compression Fitting "Sanipex MT" 26 4710.255 Sanipex MT Adapter w. male thrd. np. d26 Compression Fitting "Sanipex MT" 26 4710.257 Sanipex MT Adapter w. male thrd. ic. d26 Compression Fitting "Sanipex MT" 26 4710.260 Sanipex MT Adapter w. male thrd. d26x1" Compression Fitting "Sanipex MT" 26x1 4710.267 Sanipex MT Adapter w. male thrd. ic. d26 Compression Fitting "Sanipex MT" 26 4710.310 Sanipex MT Adapter w. male thrd. d32x1" Compression Fitting "Sanipex MT" 32x1 4710.317 Sanipex MT Adapter w. male thrd. ic. d32 Compression Fitting "Sanipex MT" 32 4710.410 Sanipex MT Adapter w. male thrd. d40 Compression Fitting "Sanipex MT" 40 4710.417 Sanipex MT Adapter w. male thrd. ic. d40 Compression Fitting "Sanipex MT" 40 4710.510 Sanipex MT Adapter w. male thrd. d50 Compression Fitting "Sanipex MT" 50 4710.610 Sanipex MT Adapter w. male thrd. d63x2" Compression Fitting "Sanipex MT" 63x2 4711.115 Sanipex MT Adapter w. male thrd. np. d16 Compression Fitting "Sanipex MT" 16 4712.110 Sanipex MT Adapter w. fem. thrd. d16 Compression Fitting "Sanipex MT" 16 4712.210 Sanipex MT Adapter w. fem. thrd. d20 Compression Fitting "Sanipex MT" 20 4712.217 Sanipex MT Adapter w. fem. thrd. ic. d20 Compression Fitting "Sanipex MT" 20 4712.220 Sanipex MT Adapter w. fem. thrd. d20 Compression Fitting "Sanipex MT" 20 4712.240 Sanipex MT Adapter w. fem. thrd. d26 Compression Fitting "Sanipex MT" 26 4712.250 Sanipex MT Adapter w. fem. thrd. d26 Compression Fitting "Sanipex MT" 26 4712.257 Sanipex MT Adapter w. fem. thrd. ic. d26 Compression Fitting "Sanipex MT" 26 4712.260 Sanipex MT Adapter w. fem. thrd. d26x1" Compression Fitting "Sanipex MT" 26x1 4712.310 Sanipex MT Adapter w. fem. thrd. d32x1" Compression Fitting "Sanipex MT" 32x1 4712.317 Sanipex MT Adapter w. fem. thrd. ic. d32 Compression Fitting "Sanipex MT" 32 4712.410 Sanipex MT Adapter w. fem. thrd. d40 Compression Fitting "Sanipex MT" 40 4712.417 Sanipex MT Adapter w. fem. thrd. ic. d40 Compression Fitting "Sanipex MT" 40 4712.510 Sanipex MT Adapter w. fem. thrd. d50 Compression Fitting "Sanipex MT" 50 4712.610 Sanipex MT Adapter w. fem. thrd. d63x2" Compression Fitting "Sanipex MT" 63x2 4730.100 Sanipex MT Reduction d20xd16 Compression Fitting "Sanipex MT" 20x16 4730.102 Sanipex MT Reduction d26xd16 Compression Fitting "Sanipex MT" 26x16 4730.104 Sanipex MT Reduction d26xd20 Compression Fitting "Sanipex MT" 26x20 4730.106 Sanipex MT Reduction d32xd16 Compression Fitting "Sanipex MT" 32x16 4730.108 Sanipex MT Reduction d32xd20 Compression Fitting "Sanipex MT" 32x20 4730.110 Sanipex MT Reduction d32xd26 Compression Fitting "Sanipex MT" 32x26 4730.112 Sanipex MT Reduction d40xd16 Compression Fitting "Sanipex MT" 40x16 4730.114 Sanipex MT Reduction d40xd20 Compression Fitting "Sanipex MT" 40x20 4730.116 Sanipex MT Reduction d40xd26 Compression Fitting "Sanipex MT" 40x26 4730.118 Sanipex MT Reduction d40xd32 Compression Fitting "Sanipex MT" 40x32 4730.124 Sanipex MT Reduction d50xd26 Compression Fitting "Sanipex MT" 50x26 4730.126 Sanipex MT Reduction d50xd32 Compression Fitting "Sanipex MT" 50x32 4730.128 Sanipex MT Reduction d50xd40 Compression Fitting "Sanipex MT" 50x40 4730.136 Sanipex MT Reduction d63xd32 Compression Fitting "Sanipex MT" 63x32 4730.138 Sanipex MT Reduction d63xd40 Compression Fitting "Sanipex MT" 63x40 4730.140 Sanipex MT Reduction d63xd50 Compression Fitting "Sanipex MT" 63x50
Approval Holder:
Georg Fischer JRG AG
Company Name
Georg Fischer JRG AG
Address
Hauptstrasse 130, CH-4450 Sissach
Country
Switzerland
General Email
michael.ries@georgfischer.com

View All Listings by this Company

Print This Approval

#240702052

‘Tectite 316’ range of push-fit fittings with stainless steel bodies incorporating EPDM ‘O’-rings for use with stainless steel tube (Grade 316 manufactured to EN 10312). Maximum working pressure: Fittings 15mm to 28mm 10.0 bar. Fittings 35mm to 54mm 6.0 bar. Maximum operating temperature 90°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240702052
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models.
Marking:
Tectite 316 & size on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
15mm TS1/TS270 Coupling 18mm TS1/TS270 Coupling 22mm TS1/TS270 Coupling 28mm TS1/TS270 Coupling 35mm TS1/TS270 Coupling 42mm TS1/TS270 Coupling 54mm TS1/TS270 Coupling 15mm TS1S/TS270S Slip Coupling 18mm TS1S/TS270S Slip Coupling 22mm TS1S/TS270S Slip Coupling 28mm TS1S/TS270S Slip Coupling 15mm x 1/2" TS2/TS270G Connector 18mm x 3/4" TS2/TS270G Connector 18mm x 1/2" TS2/TS270G Connector 22mm x 3/4" TS2/TS270G Connector 22mm x 1/2" TS2/TS270G Connector 22mm x 1" TS2/TS270G Connector 28mm x 3/4" TS2/TS270G Connector 28mm x 1" TS2/TS270G Connector 35mm x 1 1/4" TS2/TS270G Connector 42mm x 1 1/2" TS2/TS270G Connector 54mm x 2" TS2/TS270G Connector 15mm x 1/2" TS3/TS243G Connector 18mm x 3/4" TS3/TS243G Connector 18mm x 1/2" TS3/TS243G Connector 22mm x 3/4" TS3/TS243G Connector 22mm x 1/2" TS3/TS243G Connector 28mm x 3/4" TS3/TS243G Connector 28mm x 1" TS3/TS243G Connector 35mm x 1 1/4" TS3/TS243G Connector 42mm x 1 1/2" TS3/TS243G Connector 54mm x 2" TS3/TS243G Connector 18 x 15mm TS6/TS243 Reducer 22 x 15mm TS6/TS243 Reducer 22 x 18mm TS6/TS243 Reducer 28 x 15mm TS6/TS243 Reducer 28 x 18mm TS6/TS243 Reducer 28 x 22mm TS6/TS243 Reducer 35 x 22mm TS6/TS243 Reducer 35 x 28mm TS6/TS243 Reducer 42 x 22mm TS6/TS243 Reducer 42 x 28mm TS6/TS243 Reducer 42 x 35mm TS6/TS243 Reducer 54 x 35mm TS6/TS243 Reducer 54 x 42mm TS6/TS243 Reducer 15mm TS12/TS090 Elbow 18mm TS12/TS090 Elbow 22mm TS12/TS090 Elbow 28mm TS12/TS090 Elbow 35mm TS12/TS090 Elbow 42mm TS12/TS090 Elbow 54mm TS12/TS090 Elbow 15mm TS12S/TS092 Street Elbow 18mm TS12S/TS092 Street Elbow 22mm TS12S/TS092 Street Elbow 28mm TS12S/TS092 Street Elbow 15mm x 1/2" TS13/TS092G Elbow 18mm x 1/2" TS13/TS092G Elbow 22mm x 3/4" TS13/TS092G Elbw , 28mm x 1" TS13/TS092G Elbow 15mm x 1/2" TS14/TS090G Elbow 18mm x 1/2" TS14/TS090G Elbow 18mm x 3/4" TS14/TS090G Elbow 22mm x 3/4" TS14/TS090G Elbow 28mm x 1" TS14/TS090G Elbow 15mm x 1/2" TS15/TS471G Backplate Elbow 18mm x 1/2" TS15/TS471G Backplate Elbow 22mm x 3/4" TS15/TS471G Backplate Elbow 15mm TS18/TS002A Slow Bend 18mm TS18/TS002A Slow Bend 22mm TS18/TS002A Slow Bend 28mm TS18/TS002A Slow Bend 35mm TS18/TS002A Slow Bend 42mm TS18/TS002A Slow Bend 54mm TS18/TS002A Slow Bend 15mm TS18S/TS001 Elbow 18mm TS18S/TS001 Elbow 22mm TS18S/TS001 Elbow 28mm TS18S/TS001 Elbow 15mm TS21/TS041 Obtuse Elbow 18mm TS21/TS041 Obtuse Elbow 22mm TS21/TS041 Obtuse Elbow 28mm TS21/TS041 Obtuse Elbow 35mm TS21/TS041 Obtuse Elbow 42mm TS21/TS041 Obtuse Elbow 54mm TS21/TS041 Obtuse Elbow 15mm TS21S/TS040 Obtuse Street Elbow 18mm TS21S/TS040 Obtuse Street Elbow 22mm TS21S/TS040 Obtuse Street Elbow 28mm TS21S/TS040 Obtuse Street Elbow 35mm TS21S/TS040 Obtuse Street Elbow 42mm TS21S/TS040 Obtuse Street Elbow 15mm TS24/TS130 Tee 18mm TS24/TS130 Tee 22mm TS24/TS130 Tee 28mm TS24/TS130 Tee 35mm TS24/TS130 Tee 42mm TS24/TS130 Tee 54mm TS24/TS130 Tee 18 x 18 x 15mm TS25/TS130 Tee 22 x 22 x 15mm TS25/TS130 Tee 22 x 22 x 18mm TS25/TS130 Tee 28 x 28 x 15mm TS25/TS130 Tee 28 x 28 x 18mm TS25/TS130 Tee 28 x 28 x 22mm TS25/TS130 Tee 35 x 35 x 15mm TS25/TS130 Tee 35 x 35 x 22mm TS25/TS130 Tee 35 x 35 x 28mm TS25/TS130 Tee 42 x 42 x 28mm TS25/TS130 Tee 54 x 54 x 22mm TS25/TS130 Tee 54 x 54 x 28mm TS25/TS130 Tee 15 x 15mm x 1/2" TS30/TS130G Tee 18 x 18mm x 1/2" TS30/TS130G Tee 22 x 22mm x 1/2" TS30/TS130G Tee 22 x 22mm x 3/4" TS30/TS130G Tee 28 x 28mm x 1/2" TS30/TS130G Tee 35 x 35mm x 1/2" TS30/TS130G Tee 42 x 42mm x 1/2" TS30/TS130G Tee 15mm TS61/TS301 Stop End 18mm TS61/TS301 Stop End 22mm TS61/TS301 Stop End 28mm TS61/TS301 Stop End 35mm TS61/TS301 Stop End 42mm TS61/TS301 Stop End 54mm TS61/TS301 Stop End 15mm x 1/2" TS62/TS062 Tap Connector 22mm x 3/4" TS62/TS062 Tap Connector
Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company
Manufacturer:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval

#240902042

Range of ‘B’ Press XL copper crimped fittings with EPDM ‘O’-rings for use with copper pipe to BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
240902042
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See Models Below
Marking:
>‘B’<, Size and DVGW
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
P5001 90° Street Bend P5001 06400000 – 64MM P5001 06700000 – 67MM P5001 07600000 – 76MM P5001 08900000 – 89MM P5001 10800000 – 108MM P5002 90° Bend P5002 06400000 – 64MM P5002 06700000 – 67MM P5002 07600000 – 76MM P5002 08900000 – 89MM P5002 10800000 – 108MM P5040 45° Obtuse Street Elbow P5040 06400000 – 64MM P5040 06700000 – 67MM P5040 07600000 – 76MM P5040 08900000 – 89MM P5040 10800000 – 108MM P5041 45° Obtuse Elbow P5041 06400000 – 64MM P5041 06700000 – 67MM P5041 07600000 – 76MM P5041 08900000 – 89MM P5041 10800000 – 108MM P5130 Equal Tee P5130 06400000 – 64MM P5130 06700000 – 67MM P5130 07600000 – 76MM P5130 08900000 – 89MM P5R 108108108 – 108MM P5130G Tee with Female Branch P5130G06406640 – 64 x ¾” BSP x 64MM P5130G06408640 – 64 x 1” BSP X 64MM P5130G06416640 – 64 x 2” BSP X 64MM P5130G06706670 – 67 x ¾” BSP x 67MM P5130G06716670 – 67 x 2” BSP x 67MM P5130G07606760 – 76 x ¾” BSP x 76MM P5130G07616760 – 76 x 2” BSP x 76MM P5130G08906890 – 89 x ¾” BSP x 89MM P5130G08916890 – 89 x 2” BSP x 89MM P5RG108061080 – 108 x ¾” BSP x 108MM P5RG108161080 – 108 x 2” BSP x 108MM P5130RB Tee Reduced Branch P5130 06435640 – 64 x 35 x 64MM P5130 06442650 – 64 x 42 x 64MM P5130 06454640 – 64 x 54 x 64MM P5130 06728670 – 67 x 28 x 67MM P5130 06735670 – 67 x 35 x 67MM P5130 06742670 – 67 x 42 x 67MM P5130 06754670 – 67 x 54 x 67MM P5130 07628760 – 76 x 28 x 76MM P5130 07635760 – 76 x 35 x 76MM P5130 07642760 – 76 x 42 x 76MM P5130 07654760 – 76 x 54 x 76MM P5130 07664760 – 76 x 64 x 76MM P5130 07667760 – 76 x 67 x 76MM P5130 08954890 – 89 x 54 x 89MM P5130 08964890 – 89 x 64 x 89MM P5130 08976890 – 89 x 76 x 89MM P5R 0108054108 – 108 x 54 x 108MM P5R 0108064108 – 108 x 64 x 108MM P5R 0108076108 – 108 x 76 x 108MM P5R 0108089108 – 108 x 89 x 108MM P5230B Flange 45° P5230B06400000 – 64MM P5230B06700000 – 67MM P5230B07600000 – 76MM P5230 076000UK – 76MM P5230B08900000 – 89MM P5230B10800000 – 108MM P5243 Fitting Reducer P5243 06435000 – 64 x 35MM P5243 06442000 – 64 x 42MM P5243 06454000 – 64 X 54MM P5243 06728000 – 67 x 28MM P5243 06735000 – 67 x 35MM P5243 06742000 – 67 x 42MM P5243 06754000 – 67 x 54MM P5243 07628000 – 76 x 28MM P5243 07635000 – 76 x 35MM P5243 07642000 – 76 x 42MM P5243 07654000 – 76 x 54MM P5243 07664000 – 76 x 64MM P5243 07667000 – 76 x 67MM P5243 08954000 – 89 x 54MM P5243 08964000 – 89 x 64MM P5243 08976000 – 89 x 76MM P5243 10854000 – 108 x 54MM P5243 10864000 – 108 x 64MM P5243 10876000 – 108 x 76MM P5243 10889000 – 108 x 89MM P5243G Male Threaded Straight Connector P5243G064200000 – 64 x 2-1/2” BSP P5243G067200000 – 67 x 2-1/2” BSP P5243G076200000 – 76 x 2-1/2” BSP P5243G076024000 – 76 x 3” BSP P5243G089240000 – 89 x 3” BSP P5243G10832000 – 108 X 4” BSP P5270 Straight Connector P5270 06400000 – 64MM P5270 06700000 – 67MM P5270 07600000 – 76MM P5270 08900000 – 89MM P5270 10800000 – 108MM P5270G Female Threaded Straight Connector P5270G06420000 – 64 x 2-1/2” BSP P5270G06720000 – 67 x 2-1/2” BSP P5270G07620000 – 76 x 2-1/2” BSP P5270G07624000 – 76 x 3” BSP P5270G08924000 – 89 x 3” BSP P5270G10832000 – 108 x 4” BSP P5275 Repair Coupling P5275 06400000 – 64MM P5275 06700000 – 67MM P5275 07600000 – 76MM P5275 08900000 – 89MM P5275 10800000 – 108MM P5301 End Cap P5301 06400000 – 64MM P5301 06700000 – 67MM P5301 07600000 – 76MM P5301 08900000 – 89MM P5301 10800000 – 108MM
Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 147 of 234

© WRAS 2026 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.