Range of floor standing, single hole, single outlet (fixed) combination tap assemblies (stainless steel bodies – various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

251108001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” NPT (F).

Marking:

BAGNODESIGN on body.

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Model:

BDM-STU-306-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (stainless steel bodies – various finishes), incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0450 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

251108002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel PEX lined flexible hose assemblies with ½” BSP captive nut end connection.

Marking:

BAGNODESIGN on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Model:

BDM-STU-301S-XX, BDM-STU-302S-XX. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck mounted Stainless steel Braided PEX lined flexible hose assemblies incorporating 3/8 captive nut end connections. Supplied with a click type waste - not verified by test. Capable of achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe d.o.o.

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted Model 34127 has nylon braided PEX lined inlet hoses. Models 34010, 34016 & 34017 polyamide braided PE lined inlet hoses. Capable of achieving AUK3 Tap Gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2030

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe SE

Section:

0450 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a fixed spout.

Deck Mounted. Capable of achieving AUK3 Tap Gap Stainless Steel braided PEX lined flexible hose assemblies.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

31/12/2030

Notes & Further Information

The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Postcode

510700

Country

China

Phone

+86-20-23371404

General Email

sale@watersino.com

View All Listings by this Company

Range of single hole, single outlet (swivel) combination tap assemblies (brass bodies - various finishes, see model), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

250912059

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Stainless steel braided PEX lined flexible hose assemblies with ½” captive nut end connections.

Marking:

Abode on body.

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/09/2030

Model:

ACT3077 ACT3078 ACT3079 ACT3081 ACT3080 ACT3083 ACT3084 ACT3085 ACT3120 ACT3086

Approval Holder:

Norcros Group (Holdings) Limited T/A Abode

Company Name

Norcros Group (Holdings) Limited T/A Abode

Address

Unit L Zenith Park Whailey Road Barnsley

Postcode

S75 1HT

Country

United Kingdom

Phone

01226 283434

General Email

info@abode.eu

View All Listings by this Company

Section:

0470 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted Stainless-steel or nylon braided with PEX lined Inlet hoses Capable of Achieving AUK3 Tap Gap

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Notes & Further Information

Various finish: (1)Without suffix to current model number:Chrome plated (2)With suffix B:Black (3)With suffix BB:Brushed brass

Approval Holder:

Taizhou Shenglang Sanitary Ware Co., Ltd.

Company Name

Taizhou Shenglang Sanitary Ware Co., Ltd.

Address

Zhongshan Industrial Zone, Chumen Town, Yuhuan, Zhejiang

Country

China

View All Listings by this Company

Manufacturers:

Taizhou Shenglang Sanitary Ware Co, Ltd.

Section:

0470 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a swivel spout.

Deck mounted Inlet hoses Stainless steel braided EPDM flexible hose assemblies incorporating 1/2" BSP captive nut end connections. Capable of achieving AUK 3 Tap gap.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R010

Expiry date:

30/11/2030

Approval Holder:

MVI Hazel Ltd.

Company Name

MVI Hazel Ltd.

Address

1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

Section:

0470 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a single outlet and a swivel spout.

Deck Mounted. Capable of achieving AUK3 Tap Gap Incorporating Stainless Steel braided PEX lined inlet hoses.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Notes & Further Information

* stands for the different handle A, B,C and D ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Postcode

510700

Country

China

Phone

+86-20-23371404

General Email

sale@watersino.com

View All Listings by this Company

Section:

0490 Combination Tap Assemblies

Description:

A Range of Single hole tap(s) with a double outlet and a swivel spout.

Deck Mounted. Stainless steel braided, EPDM lined, inlet hoses. Capable of achieving AUK3 Tap Gap.

Installation Requirements:

R001 R006

Expiry date:

31/12/2030

Approval Holder:

MVI Hazel Ltd.

Company Name

MVI Hazel Ltd.

Address

1 Mygan Business Park, Jamestown Road, Finglas, Dublin 11

View All Listings by this Company

Section:

0510 Combination Tap Assemblies

Description:

A Range of Two hole tap(s) with a single outlet and a fixed spout.

Wall Mounted.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R010 R040

Expiry date:

30/11/2030

Notes & Further Information

The first * stands for the different handle A, B,C and D, if there is no handle, no first * ** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Postcode

510700

Country

China

Phone

+86-20-23371404

General Email

sale@watersino.com

View All Listings by this Company

Ramge of deck mounted, two-hole, single outlet (fixed) combination tap assemblies (stainless steel body – various finishes) incorporating a ceramic cartridge headwork with single lever operating members. The products are supplied with nylon braided, PEX lined flexible interconnecting hoses and the spout outlets incorporate a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

251108011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

PA braided PE lined flexible hose assemblies with ½” BSP captive nut end connections.

Marking:

BAGNODESIGN on body.

Installation Requirements:

R001 R006 R007 R009 R010

Expiry date:

30/11/2030

Model:

BDM-STU-304-XX XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:

BAGNODESIGN (SANIPEXGROUP)

Company Name

BAGNODESIGN (SANIPEXGROUP)

Address

Unit 1 Oakwell Park Trading Estate Birstall Leeds

Postcode

WF17 9LU

Country

United Kingdom

General Email

dan@sanipexgroup.com

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Deck mounted. Stainless steel braided TPSiV lined inlet hoses. Stainless steel braided TPSiV lined connection hoses.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R006 R007 R010

Expiry date:

30/11/2030

Notes & Further Information

Finishes available: Brass, Chrome, Nickel, Burnished Brass, Burnished Nickel, Matte Nickel, Copper, Dark Brass, Dark Nickel, Vintage Brass, Gold, Matte Gold.

Approval Holder:

In Compliance GmbH

Company Name

In Compliance GmbH

Address

Kathe-Kollwitz-Ring 5a Unna

Postcode

59423

Country

Germany

General Email

jutta.emge-degenhardt@in-compliance.de

View All Listings by this Company

Three-hole, metal, single outlet (fixed) combination tap assembly (chromium plated brass). The product incorporates quarter turn ceramic disc headworks with single lever operating members. The spout outlet incorporates a plastic aerator. Supplied with stainless steel braided PEX line connecting hoses. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:

0650 Combination Tap Assemblies

Section Subtitle:

Three hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

251102038

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Supplied with a lever type pop up waste – not verified by test.

Size:

½” BSP (F)

Marking:

Grohe on body

Installation Requirements:

R001 R006 R009 R010

Expiry date:

30/11/2030

Model:

20.301.003

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Section:

0650 Combination Tap Assemblies

Description:

A Range of Three hole tap(s) with a single outlet and a fixed spout.

Wall mounted concealed Undefinable Air Gap – See IRN’s Products need to be installed in combination with 10303180 Basic set for 3-hole basin mixer for concealed installation wall-mounted (Not part of this approval).

Installation Requirements:

R001 R040

Expiry date:

28/02/2031

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturers:

Hansgrohe SE

Section:

0682 Combination Tap Assemblies

Description:

A Range of Spout outlet(s).

Wall mounted Undefinable air gap see IRN's

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Notes & Further Information

** represents different types of finishes as follows: C: Chrome NS: Nickel brushed RP: Red powder coated TS: Zr gold brushed RS: Rose gold brushed GS: Gold brushed GM: Gun metal brushed B: Electroplated matte black W: White CB: Matte black and chrome CW: White and chrome TG: Zr gold plated RG: Rose gold plated G: Gold plated GP: Gun metal plated BS: Gun gray brushed

Approval Holder:

Guangzhou KIND Architecture Material Technology Co., Ltd.

Company Name

Guangzhou KIND Architecture Material Technology Co., Ltd.

Address

Unit 10, No.1 Dashadi West, Huangpu District, Guangzhou, Guangdong Province

Postcode

510700

Country

China

Phone

+86-20-23371404

General Email

sale@watersino.com

View All Listings by this Company

Range of copper press fittings with EPDM seals for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251012009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Hengsheng logo (HS) and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

6002 (Press 90° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6001 (Press 90° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6041 (Press 45° Bend C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6040 (Press 45° Bend FTG×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130 (Press Tee C×C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6130R (Press Reducing Tee C×C×C): 15mm×15mm×12mm, 22mm×22mm×15mm, 22mm×22mm×12mm, 22mm×15mm×15mm, 22mm×15mm×22mm, 28mm×28mm×22mm, 28mm×28mm×15mm, 28mm×15mm×22mm, 28mm×22mm×22mm, 28mm×15mm×28mm, 28mm×22mm×28mm, 35mm×35mm×28mm, 35mm×35mm×22mm, 35mm×35mm×15mm, 42mm×42mm×35mm, 42mm×42mm×28mm, 42mm×42mm×22mm, 42mm×42mm×15mm, 54mm×54mm×42mm, 54mm×54mm×35mm, 54mm×54mm×28mm, 54mm×54mm×22mm. 6301 (Press Cap): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6270 (Press Straight Coupling C×C): 12mm, 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. J6270 (Press Slip Coupling C×C): 15mm, 22mm, 28mm, 35mm, 42mm, 54mm. 6240 (Press Reducing Coupling C×C): 15mm×12mm, 22mm×15mm, 22mm×18mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm. 6243 (Press Fitting Reducer Ftg×C): 15mm×12mm, 22mm×15mm, 28mm×22mm, 28mm×15mm, 35mm×28mm, 35mm×22mm, 42mm×35mm, 42mm×28mm, 42mm×22mm, 54mm×42mm, 54mm×35mm, 54mm×28mm, 54mm×22mm.

Approval Holder:

Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Company Name

Ningbo Hengsheng Pipe Fitting Co.,Ltd.

Address

No. 28, West Jinshui Road, Ninghai, Ningbo, Zhejiang

Country

China

Phone

0086-574-65338995

General Email

sales@hengshen.com

View All Listings by this Company

'Instantor’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Instantor’ stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202007

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.

Marking:

Instantor, model and size on fitting body. Instantor, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

Coupling from 15 to 168.3mm Material 1.4401/1.4404 & 1.4301/1.4307 SP410001 SP410002 SP410003 SP410004 SP410005 SP410006 SP410007 SP410008 SP410009 SP410010 SP410011 Slip Coupling from 15 to 108mm Material 1.4401/1.4404 & 1.4301/1.4307 SP4100S1 SP4100S2 SP4100S3 SP4100S4 SP4100S5 SP4100S6 SP4100S7 SP4100S8 SP4100S9 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP415001 SP415002 SP415003 SP415004 SP415005 SP415006 SP415007 SP415008 SP415009 SP415010 SP415011 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP435001 SP435002 SP435003 SP435004 SP435005 SP435006 SP435007 SP435008 SP435009 SP435010 SP435011 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP445001 SP445002 SP445003 SP445004 SP445005 SP445006 SP445007 SP445008 SP445009 SP445010 SP445011 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP425001 SP425002 SP425003 SP425004 SP425005 SP425006 SP425007 SP425008 SP425009 SP425010 SP425011 Female Angle Adapter from 15 1/2" to 1 1/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP417001 SP417002 SP417003 SP417004 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP416001 SP416002 SP416003 SP416004 SP416005 SP416006 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP421001 SP421002 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SPP15001 SPP15002 SPP15003 SPP15004 SPP15005 SPP15006 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 SPS12001 SPS12002 SPS12003 SPS12004 SPS12005 SPS12006 SPS12007 SPS12008 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP430001 SP430221 SP430002 SP430331 SP430332 SP430003 SP430441 SP430442 SP430443 SP430004 SP430551 SP430552 SP430553 SP430005 SP430661 SP430662 SP430663 SP430006 SP430772 SP430776 SP430882 SP430883 SP430886 SP430992 SP430993 SP420996 Reducer from 22-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 SP419021 SP419031 SP419032 SP419041 SP419042 SP419043 SP419051 SP419052 SP419053 SP419054 SP419061 SP419062 SP419063 SP419064 SP419065 SP419072 SP419073 SP419074 SP419075 SP419076 SP419082 SP419083 SP419084 SP419085 SP419086 SP419087 SP419092 SP419093 SP419094 SP419095 SP419096 SP419097 SP419098 SP419099 SP419100 SP419101 SP419102 SP419103 SP419104 SP419105 Reducing tee from 22-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 SP418221 SP418331 SP418332 SP418441 SP418442 SP418443 SP418551 SP418552 SP418553 SP418554 SP418661 SP418662 SP418663 SP418664 SP418665 SP418772 SP418773 SP418774 SP418775 SP418776 SP418882 SP418883 SP418884 SP418885 SP418886 SP418887 SP418992 SP418993 SP418994 SP418995 SP418996 SP418997 SP418998 SP418999 SP418101 SP418102 SP418103 SP418104 SP418105 SP418106 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 SP418001 SP418002 SP418003 SP418004 SP418005 SP418006 SP418007 SP418008 SP418009 SP418010 SP418011 Female adaptor from 15 1/ 2" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 SP412001 SP412012 SP412021 SP412002 SP412023 SP412032 SP412003 SP412034 SP412043 SP412004 SP412045 SP412054 SP412005 SP412065 SP412006 SP412070 SP412087 Male adaptor from 15 1/2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 SP411001 SP411012 SP411021 SP411002 SP411023 SP411032 SP411003 SP411034 SP411043 SP411004 SP411045 SP411054 SP411005 SP411065 SP411006 SP411070 SP411087 SP411099 Flanges adaptor PN16 from 15 DN16 to 108 DN16 Material 1.4401/1.4404 & 1.4301/1.4307 SP440001 SP440002 SP440003 SP440004 SP440005 SP440006 SP440007 SP440008 SP440009 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400011 SP400012 SP400013 Stop End/Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP451001 SP451002 SP451003 SP451004 SP451005 SP451006 SP451007 SP451007 SP451008 Air tube Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP422001 SP422002 SP422003 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400014 SP400015 SP400016 3 Pieces adaptor from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP424001 SP424002 SP424003 SP424004 SP424005 SP424006 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 SP400017 SP400018 SP400019 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP426001 SP426021 SP426002 SP426032 SP426003 SP426004 SP426005 SP426006 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP427001 SP427021 SP427002 SP427032 SP427003 SP427004 SP427005 SP427006 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 SP428006 SP428007 SP428008 SP428009 SP428010 SP428011 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 SP433001 SP433002 SP433003 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 SP434001 SP434002 SP434003 SP434004 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP480001 SP480002 SP480003 SP480004 SP480005 SP480006 Male Tee threaded adaptor from 15 1/2" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 SP436001 SP436002 SP436003 SP436004 90Q Male angle adaptor from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP439001 SP439002 SP439003 SP439004 SP439005 SP439006 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP U11001 SP U11012 SP U11023 SP U11002 SP U11003 SP U11034 SP U11004 SP U11005 SP U11006 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 SP U12001 SP U12012 SP U12023 SP U12002 SP U12003 SP U12034 SP U12004 SP U12005 SP U12006 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 SP481012 SP481002 SP481023 SP481003 SP481034 SP481004 SP481045 SP481005 SP481056 SP481006 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP460001 SP460002 SP460003 SP460004 SP460005 SP460006 Half coupling from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP470001 SP470002 SP470003 SP470004 SP470005 SP470006 SP470007 SP470008 SP470009 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP483001 SP483002 SP483003 SP483004 SP483005 SP483006 SP483007 SP483008 SP483009 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP490001 SP490002 SP490003 SP490004 SP490005 SP490006 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP450001 SP450002 SP450003 SP450004 SP450005 SP450006 SP450007 SP450008 SP450009 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP482001 SP482002 SP482003 SP482004 SP482005 SP482006 SP482007 SP482008 SP482009 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 SP452001 SP452002 SP452003 SP452004 SP452005 SP452006 SP452007 SP452008 SP452009 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP453001 SP453002 SP453003 SP453004 SP453005 SP453006 SP453007 SP453008 SP453009 Male plug from 16 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 SP454001 SP454002 SP454003 SP454004 SP454005 SP454006 SP454007 SP454008 SP454009 Weld Adaptor from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 SP455001 SP455002 SP455003 SP455004 SP455005 SP455006 60Q Elbow with plain ends from 15 to 54 Material (316L)1.4404 SP458001 SP458002 SP458003 SP458004 SP458005 SP458006 PIPE: ISSP 111 = 15 x 0.6 mm Material (316L) 1.4404 ISSP 112 = 22 x 0.7 mm Material (316L) 1.4404 ISSP 113 = 28 x 0.8 mm Material (316L) 1.4404 ISSP 114 = 35 x 1 mm Material (316L) 1.4404 ISSP 115 = 42 x 1.1mm Material (316L) 1.4404 ISSP 116 = 54 x 1.2 mm Material (316L) 1.4404 ISSP 117 = 76.1 x 1.5 mm Material (316L) 1.4404 ISSP118 = 88.9 x 2 mm Material (316L) 1.4404 ISSP120 139.7 x 2 mm Material (316L) 1.4404 ISSP121 168.3 x 2 mm Material (316L) 1.4404

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Instantor Works Santry Avenue Dublin

Postcode

D09 K160

Country

Ireland

Phone

+353(0)1 842 6255

General Email

Ryan.Charleson@Instantor.ie

View All Listings by this Company

Range of DZR brass compression fittings for use with 'Wavin PE-RT Pipe'. Maximum working pressure:20 bar Maximum working temperature:23°c

Section:

1120 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251102035

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

WAVIN, DZR, Size on nut. Pipe: Wavin, Material, Temperature, Size, DOM (DD.MM.YY) and other technical information

Installation Requirements:

R001 R008

Expiry date:

30/11/2030

Model:

4066009, WAVIN DR Brass Female Elbow 16x1/2” DZR Brass Compression Fittings for Plumbing PERT Pipes (Water Fittings) 4066041, WAVIN DR Brass Male Adaptor (DZR) 16x1/2” DR Brass Compression Fittings for Plumbing PERT Pipes (Water Fittings) 3075172, Wavin PE-RT Pipe" Extruded, off-white coloured 16mmx2.2 mm

Approval Holder:

Sadara General Trading LLC

Company Name

Sadara General Trading LLC

Address

Office No. 305, Dubai Society Cooperative Building, Al Garhoud, Dubai, United Arab Emirates

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Taizhou Double Winners Copper Co., Ltd logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

6243G Coupler Male: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x3/4", 28x1", 35x1", 35x11/4", 42x11/2", 54x2". 6270G Coupler Female: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x3/4", 28x1", 35x1", 35x11/4", 42x11/2", 54x2". 6359G Straight Swivel: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x1", 28x11/4". 6092G Male Elbow: 15x1/2", 15x3/4", 22x3/4", 22x1", 28x1". 6090G Female Elbow: 15x1/2", 15X3/4", 22x3/4", 22x1", 28x1". 6472G Female Wallplate Elbow: 15x1/2", 22x3/4". 6130G Branch Tee (left x right x middle): 15x15x1/2", 22x22x1/2", 22x22x3/4", 28x28x1/2", 28x28x3/4", 28x28x1", 35x35x1/2", 35x35x3/4", 35x35x1", 42x42x1/2", 54x54x1/2". 6246G Female Adaptor: 1/2"x15, 3/4"x22. 6361G Male Union: 15x1/2", 22x3/4", 28x1". 6330G Female Union: 15x1/2", 22x3/4", 28x1". Models added December 2025 6330 Straight Union 15mm 22mm 28mm 35mm 42mm 54mm 6280 Male Adaptor 12x1/2" 15x1/2" 18x1/2" 22x1/2" 22x3/4" 28x1"

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

Room 902, No.185-1 Wenxue Road, Jiazhi Street, Jiaojiang, Taizhou, Zhejiang

Postcode

31800

Country

China

General Email

info@double‐winners.com

View All Listings by this Company